JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · Shift 1

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 6 Apr 2026 Shift 1 – Question Paper

75 questions · 300 marks · 180 minutes · +4 for a correct answer, −1 for a wrong one. Free PDF with answer key.

Library – airGurukul

Paper pattern

SectionQuestionsMarks
Mathematics25100
Physics25100
Chemistry25100

Sample questions from this paper

Q1.
Let [⋅] denote the greatest integer function. If the domain of the function f(x)=sin−1⁡(x+[x]3) is [α,β), then α2+β2 is equal to:
माना [⋅] महत्तम पूर्णांक फलन को दर्शाता है। यदि फलन f(x)=sin−1⁡(x+[x]3) का प्रान्त [α,β) है, तो α2+β2 बराबर है:
  1. A2
  2. B5
  3. C10
  4. D13
Show answer

Concept: sin−1⁡t needs −1≤t≤1, so −3≤x+[x]≤3. As [x] is constant on each [n,n+1), check interval by interval.

  1. x∈[1,2): x+[x]=x+1∈[2,3) – allowed. x∈[2,3): x+2≥4>3 – not allowed. So the right end is x<2.
  2. x∈[−1,0): x+[x]=x−1∈[−2,−1) – allowed. x∈[−2,−1): x−2∈[−4,−3), always <−3 – not allowed.
  3. [0,1) gives x∈[0,1) – allowed. Domain =[−1,2), so α=−1, β=2.
  4. α2+β2=1+4=5.

Short trick: x+[x] is increasing and jumps over values; it never takes −3 or 3, so the domain is from the start of the block [−1,0) to the end of the block [1,2).

Answer: (B) 5

अवधारणा: sin−1⁡t के लिए −1≤t≤1 आवश्यक है, अतः −3≤x+[x]≤3। [x] प्रत्येक अंतराल [n,n+1) पर अचर है, इसलिए अंतराल-दर-अंतराल जाँच कीजिए।

  1. x∈[1,2): x+[x]=x+1∈[2,3) – मान्य। x∈[2,3): x+2≥4>3 – अमान्य। अतः दायाँ सिरा x<2 है।
  2. x∈[−1,0): x+[x]=x−1∈[−2,−1) – मान्य। x∈[−2,−1): x−2∈[−4,−3), सदैव <−3 – अमान्य।
  3. [0,1) में x∈[0,1) – मान्य। प्रान्त =[−1,2), अतः α=−1, β=2।
  4. α2+β2=1+4=5।

शॉर्ट ट्रिक: x+[x] वर्धमान है और कुछ मानों को लाँघ जाता है; यह −3 या 3 कभी नहीं लेता, अतः प्रान्त खण्ड [−1,0) के आरम्भ से खण्ड [1,2) के अंत तक है।

उत्तर: (B) 5

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)MathematicsFunctions – domain with greatest integer
Q26.
The density ρ of a uniform cylinder is determined by measuring its mass m, length l and diameter d. The measured values of m, l and d are 97.42±0.02 g, 8.35±0.05 mm and 20.20±0.02 mm, respectively. Calculated percentage fractional error in ρ is ________.
किसी एकसमान बेलन का घनत्व ρ उसके द्रव्यमान m, लम्बाई l तथा व्यास d को मापकर ज्ञात किया जाता है। m, l तथा d के मापे गए मान क्रमशः 97.42±0.02 g, 8.35±0.05 mm तथा 20.20±0.02 mm हैं। ρ में परिकलित प्रतिशत भिन्नात्मक त्रुटि ________ है।
  1. A0.63%
  2. B0.82%
  3. C0.72%
  4. D0.25%
Show answer

Concept: ρ=mπd2l/4, so relative errors add with powers: Δρρ=Δmm+Δll+2Δdd.

  1. Δmm=0.0297.42=0.000205
  2. Δll=0.058.35=0.005988
  3. 2Δdd=2×0.0220.20=0.001980
  4. Sum =0.008174⇒0.82%.

Short trick: The length term (≈0.60%) dominates; adding ≈0.20% from d and ≈0.02% from m gives 0.82%.

Answer: (B) 0.82%

अवधारणा: ρ=mπd2l/4, अतः घातों सहित आपेक्षिक त्रुटियाँ जुड़ती हैं: Δρρ=Δmm+Δll+2Δdd।

  1. Δmm=0.0297.42=0.000205
  2. Δll=0.058.35=0.005988
  3. 2Δdd=2×0.0220.20=0.001980
  4. योग =0.008174⇒0.82%।

शॉर्ट ट्रिक: लम्बाई वाला पद (≈0.60%) प्रमुख है; d से ≈0.20% तथा m से ≈0.02% जोड़ने पर 0.82%।

उत्तर: (B) 0.82%

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsUnits & Measurements – propagation of errors
Q51.

An oxide of iron contains 69.9% iron, its empirical formula, is:

(Given : Molar mass of Fe and O are 56 and 16 g mol−1 respectively.)

आयरन के एक ऑक्साइड में 69.9% आयरन है, इसका मूलानुपाती सूत्र (empirical formula) है:

(दिया है : Fe तथा O के मोलर द्रव्यमान क्रमशः 56 तथा 16 g mol−1 हैं।)

  1. AFeO
  2. BFe2O3
  3. CFe3O4
  4. DFeO3
Show answer

Concept: Convert mass % to moles and take the simplest whole-number ratio.

  1. In 100 g: Fe = 69.9 g, O = 30.1 g.
  2. mol Fe = 69.956=1.248; mol O = 30.116=1.881.
  3. Ratio O : Fe = 1.8811.248=1.51≈1.5, so Fe : O = 2 : 3 → Fe2O3.
  4. Check: %Fe in Fe2O3 = 112160×100=70%; FeO gives 77.8%, Fe3O4 72.4%, FeO3 53.8%.

Short trick: Remember %Fe: FeO 78, Fe3O4 72, Fe2O3 70.

Answer: (B) Fe2O3

अवधारणा: द्रव्यमान % को मोल में बदलकर सरलतम पूर्णांक अनुपात लीजिए।

  1. 100 g में: Fe = 69.9 g, O = 30.1 g।
  2. Fe के मोल = 69.956=1.248; O के मोल = 30.116=1.881।
  3. अनुपात O : Fe = 1.8811.248=1.51≈1.5, अतः Fe : O = 2 : 3 → Fe2O3।
  4. जाँच: Fe2O3 में %Fe = 112160×100=70%; FeO में 77.8%, Fe3O4 में 72.4%, FeO3 में 53.8%।

शॉर्ट ट्रिक: %Fe याद रखें: FeO 78, Fe3O4 72, Fe2O3 70।

उत्तर: (B) Fe2O3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryMole Concept – empirical formula

See all 75 solutions

More JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) papers

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 6 Apr 2026 Shift 1 Question Paper PDF with Answer Key | airGurukul