UPHESC Assistant Professor Statistics · 100 questions

UPHESC Assistant Professor Statistics 2025 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

70 questions in Statistics.

Q61.
Match List – I with List – II and select the correct answer from the codes given below the lists :
List – IList – II
a. CRDI. Ensures that each treatment appears the same number of times in each block
b. RBDII. Requires randomization and replication
c. LSDIII. Controls for two sources of variability
d. BIBDIV. Accounts for variability within blocks
सूची – I को सूची – II के साथ सुमेलित कीजिए तथा सूचियों के नीचे दिए गए कूट से सही उत्तर चुनिए :
सूची – Iसूची – II
a. सी.आर.डी.I. यह सुनिश्चित करता है कि प्रत्येक उपचार प्रत्येक खण्ड में समान संख्या में दिखाई हैं
b. आर.बी.डी.II. यादृच्छिकीकरण और प्रतिकृति की आवश्यकता है
c. एल.एस.डी.III. परिवर्तनशीलता के दो स्त्रोतों के नियंत्रण
d. बी.आई.बी.डी.IV. खण्डों के भीतर परिवर्तनशीलता को ध्यान में रखता हैं
  1. Aa – II  b – IV  c – III  d – I
  2. Ba – III  b – IV  c – II  d – I
  3. Ca – I  b – III  c – II  d – IV
  4. Da – I  b – II  c – III  d – IV
Show answer

Concept: Identify the distinguishing feature of each design.

  1. CRD uses only the two basic principles – randomisation and replication, no local control (a–II).
  2. RBD groups units into homogeneous blocks so that variability between blocks is removed and comparisons are made within blocks (b–IV).
  3. LSD controls two sources of variation – rows and columns (c–III).
  4. BIBD ensures balance: every treatment is replicated equally (r times) and each pair occurs together equally often (d–I).
  5. Only code (A) has a–II and c–III.

Short trick: CRD = R + R; RBD = blocks; LSD = rows + columns; BIBD = balance.

अवधारणा: प्रत्येक अभिकल्पना की विशिष्ट पहचान पहचानें।

  1. CRD में केवल यादृच्छिकीकरण व प्रतिकृति, स्थानीय नियंत्रण नहीं (a–II)।
  2. RBD में समांगी खण्ड बनाकर तुलना खण्डों के भीतर होती है (b–IV)।
  3. LSD दो स्रोतों – पंक्ति व स्तंभ – को नियंत्रित करता है (c–III)।
  4. BIBD संतुलन सुनिश्चित करता है – प्रत्येक उपचार समान बार (d–I)।
  5. केवल कूट (A) में a–II व c–III है।

याद रखें: CRD = यादृच्छिकीकरण + प्रतिकृति; LSD = दो स्रोत।

UPHESC Assistant Professor StatisticsStatisticsExperimental designsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q62.
Match List – I with List – II and select the correct answer from the codes given below the lists.
List – IList – II
a. Multivariate normal distributionI. Used to test the mean vector is multivariate population
b. Hotelling's T2II. Measure of the distance
c. Mahalanobis D2III. Generalization of χ2
d. Wishart DistributionIV. Distribution characterized by multiple correlated variables
सूची – I को सूची – II के साथ सुमेलित कीजिए तथा सूचियों के नीचे दिए गए कूट से सही उत्तर चुनिए :
सूची – Iसूची – II
a. बहुचरीय प्रसामान्य बंटनI. बहुचरीय जनसंख्या में माध्य सदिश का परीक्षण करने के लिए उपयोग किया जाता है
b. होटेलिंग का T2II. दूरी की माप
c. महालनोबिस D2III. χ2 का सामान्यीकरण
d. विशार्ट बंटनIV. अनेक सहसम्बन्ध चरों द्वारा अभिलक्षित बंटन
  1. Aa – IV  b – I  c – II  d – III
  2. Ba – IV  b – II  c – I  d – III
  3. Ca – I  b – II  c – III  d – IV
  4. Da – I  b – III  c – IV  d – II
Show answer

Concept: Standard multivariate tools and their roles.

  1. Multivariate normal Np(μ,Σ) – joint distribution of several correlated variables (a–IV).
  2. Hotelling's T2 – tests a mean vector (generalised Student's t) (b–I).
  3. Mahalanobis D2 – distance between point/populations (c–II).
  4. Wishart Wp(n,Σ) – distribution of ∑xixi′, the matrix generalisation of χ2 (d–III).

Short trick: t → T², χ² → Wishart, distance → D².

अवधारणा: मानक बहुचर उपकरण और उनकी भूमिका।

  1. बहुचर प्रसामान्य – अनेक सहसंबद्ध चरों का संयुक्त बंटन (a–IV)।
  2. हॉटेलिंग T2 – माध्य सदिश का परीक्षण (b–I)।
  3. महालनोबिस D2 – दूरी का माप (c–II)।
  4. विशार्ट – χ2 का आव्यूह सामान्यीकरण (d–III)।

याद रखें: t → T², χ² → विशार्ट, दूरी → D²।

UPHESC Assistant Professor StatisticsStatisticsMultivariate distributionsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q63.
The trial control limits for R-chart with usual constant factors are
सभी सामान्य स्थिर कारकों के साथ आर- चार्ट के लिए परीक्षण नियंत्रण आयाम है
  1. AUCL = D4R, CL = R and LCL = D3RUCL = D4R, CL = R और LCL = D3R
  2. BUCL = D4R¯, CL = R¯ and LCL = D4R¯UCL = D4R¯, CL = R¯ और LCL = D4R¯
  3. CUCL = D4R¯, CL = R¯ and LCL = D3R¯UCL = D4R¯, CL = R¯ और LCL = D3R¯
  4. DNone of the aboveउपरोक्त में से कोई नहीं
Show answer

Concept: When standards are not given, R-chart limits are based on the average range R¯.

  1. CL =R¯, UCL =D4R¯, LCL =D3R¯.
  2. D3=1−3d3/d2 (0 for n≤6), D4=1+3d3/d2.
  3. Single R is not the centre line; LCL with D4 would equal UCL.

Short trick: R chart: D3R¯ – R¯ – D4R¯.

अवधारणा: मानक ज्ञात न हों तो R-चार्ट सीमाएँ औसत परास R¯ पर आधारित होती हैं।

  1. CL =R¯, UCL =D4R¯, LCL =D3R¯।
  2. D3=1−3d3/d2, D4=1+3d3/d2।
  3. एकल R केंद्र रेखा नहीं; LCL में D4 गलत।

याद रखें: R चार्ट: D3R¯ – R¯ – D4R¯।

UPHESC Assistant Professor StatisticsStatisticsR chartUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q64.
Hotelling's T2 can be approximated to statistics F with usual notation as test criterion following the inequality for rejection as
हॉटेलिंग T2 को अस्वीकृति के लिए असमानता के बाद परीक्षण मानदण्ड के रुप में सामान्य संकेतन के साथ सांख्यिकी F के सन्निकर किया जा सकता है
  1. A$T^2 < \frac{n-1}{n-p}F_{p,(n-p),\alpha}forn>p$
  2. B$T^2>\frac{n-1}{n-p}F_{p,(n-p),\alpha}forn>p$
  3. C$T^2 < F_{p,(n-p),\alpha}forn>p$
  4. D$T^2>F_{p,(n-p),\alpha}forn>p$
Show answer

Concept: Under H0, n−pp(n−1)T2∼Fp,n−p, so the correct rejection rule is $T^2>\frac{p(n-1)}{n-p}F_{p,\,n-p,\,\alpha}(needsn>p$).

  1. Rejection is in the upper tail, so (A) and (C) with '<' are wrong.
  2. (D) $T^2>F_{p,n-p,\alpha}$ drops the whole scaling factor – wrong.
  3. (B) $T^2>\frac{n-1}{n-p}F_{p,n-p,\alpha}hastherightdirectionbutomitsthefactorp;itiscorrectonlywhenp=1$, not in general.
  4. So, as printed, no option gives the correct general rule; the question is treated as a bonus. The right criterion is $T^2>\frac{p(n-1)}{n-p}F_{p,\,n-p,\,\alpha}$.

Short trick: T2=p(n−1)n−pF – remember the 'p' in front; for p=1, T2=t2=F1,n−1.

अवधारणा: H0 के अंतर्गत n−pp(n−1)T2∼Fp,n−p, अतः सही अस्वीकृति नियम $T^2>\frac{p(n-1)}{n-p}F_{p,\,n-p,\,\alpha}है(n>p$ आवश्यक)।

  1. अस्वीकृति ऊपरी पुच्छ में होती है, अतः '<' वाले (A) और (C) गलत हैं।
  2. (D) $T^2>F_{p,n-p,\alpha}$ में पूरा स्केलिंग गुणक ही नहीं है – गलत।
  3. (B) $T^2>\frac{n-1}{n-p}F_{p,n-p,\alpha}कीदिशासहीहै,परइसमेंगुणकpछूटाहै;यहकेवलp=1$ पर सही है, सामान्यतः नहीं।
  4. अतः छपे रूप में कोई भी विकल्प सामान्य सही नियम नहीं देता; प्रश्न बोनस माना गया है। सही मानदंड $T^2>\frac{p(n-1)}{n-p}F_{p,\,n-p,\,\alpha}$ है।

याद रखें: T2=p(n−1)n−pF – आगे का 'p' न भूलें; p=1 पर T2=t2=F1,n−1।

UPHESC Assistant Professor StatisticsStatisticsHotelling's <math display="inline" xmlns="http://www.w3.org/1998/Math/MathML"><msup><mi>T</mi><mn>2</mn></msup></math> testUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q65.
Which of the following is the large sample property of an estimator ?
निम्न में से आकलक का बड़ा प्रतिदर्श गुण कौन है ?
  1. AUnbiasenessअनभिनतता
  2. BSufficiencyपर्याप्ता
  3. CConsistencyसंगतता
  4. DEfficiencyदक्षता
Show answer

Concept: Consistency: Tn→Pθ as n→∞ – defined only in the limit of large samples.

  1. Unbiasedness and sufficiency are fixed-n (small-sample) properties.
  2. Efficiency is usually compared for given n (asymptotic efficiency is a separate notion).
  3. Hence consistency is the large-sample property.

Short trick: Consistency = 'gets closer to θ as n grows'.

अवधारणा: संगतता: n→∞ पर Tn→Pθ – केवल बड़े प्रतिदर्श की सीमा में परिभाषित।

  1. अनभिनतता व पर्याप्तता निश्चित n के गुण हैं।
  2. दक्षता सामान्यतः दिए n पर तुलना है।
  3. अतः संगतता बड़ा प्रतिदर्श गुण है।

याद रखें: संगतता = n बढ़ने पर θ के निकट।

UPHESC Assistant Professor StatisticsStatisticsProperties of estimatorsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q66.
Let {Xn} n≥1 be a sequence of independent and identically distributed random variables with mean 4 and variance 1.
Then $\lim_{n\to\infty}P\left(\frac{1}{n}\sum_{i=1}^{n}X_i>4.006\right)$ is equal to
मान लीजिए {Xn} n≥1 समान एवं स्वतंत्ररूप से वितरित यादृच्छिक चर का अनुक्रम है जिसका माध्य 4 और प्रसरण 1 है
तब $\lim_{n\to\infty}P\left(\frac{1}{n}\sum_{i=1}^{n}X_i>4.006\right)$ का मान है
  1. A0
  2. B0.5
  3. C1
  4. D0.25
Show answer

Concept: By WLLN, X¯n→Pμ=4.

  1. Chebyshev: $P(|\bar X_n-4|>0.006)\le\frac{1}{n(0.006)^2}\to0$.
  2. $\{\bar X_n>4.006\}\subset\{|\bar X_n-4|>0.006\}$, so its probability → 0.
  3. 0.5 would be the answer only for the threshold exactly 4 (by CLT).

Short trick: Any fixed gap above μ → probability 0; exactly at μ → ½.

अवधारणा: WLLN से X¯n→P4।

  1. चेबीशेव: $P(|\bar X_n-4|>0.006)\le\frac{1}{n(0.006)^2}\to0$।
  2. अतः $P(\bar X_n>4.006)\to0$।
  3. 0.5 केवल सीमा ठीक 4 होने पर (CLT से)।

याद रखें: μ से कोई भी स्थिर दूरी → प्रायिकता 0।

UPHESC Assistant Professor StatisticsStatisticsWeak law of large numbersUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q67.
Which of the following is contrast ?
a. 3T1+T2−3T3+T4
b. −3T1−T2+T3+3T4
c. T1+2T2−2T3−T4
d. T1−T2+T3−T4
Choose the correct answer from the options given below.
निम्नलिखित में से कौन-सा व्यतिरेक है ?
a. 3T1+T2−3T3+T4
b. −3T1−T2+T3+3T4
c. T1+2T2−2T3−T4
d. T1−T2+T3−T4
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. Aa, b, c, onlyकेवल a, b, c
  2. Ba, c, d, onlyकेवल a, c, d
  3. Cb, c, d, onlyकेवल b, c, d
  4. Da, b, d, onlyकेवल a, b, d
Show answer

Concept: ∑ciTi is a contrast iff ∑ci=0.

  1. a: 3+1−3+1=2≠0 – not a contrast.
  2. b: −3−1+1+3=0 ✓
  3. c: 1+2−2−1=0 ✓
  4. d: 1−1+1−1=0 ✓

Short trick: Add the coefficients – zero means contrast.

अवधारणा: ∑ciTi व्यतिरेक है यदि ∑ci=0।

  1. a: 3+1−3+1=2 – व्यतिरेक नहीं।
  2. b: 0 ✓
  3. c: 0 ✓
  4. d: 0 ✓

याद रखें: गुणांकों का योग शून्य = व्यतिरेक।

UPHESC Assistant Professor StatisticsStatisticsContrastsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q68.
Match List – I with List – II :
List – IList – II
a. ex0I. 2Mx2+mx
b. axII. lx+Tx+1
c. MxIII. dx/lx
d. TxIV. Tx/lx
Choose the correct answer from the code given below.
सूची – I को सूची – II के साथ सुमेलित करें :
सूची – Iसूची – II
a. ex0I. 2Mx2+mx
b. axII. lx+Tx+1
c. MxIII. dx/lx
d. TxIV. Tx/lx
नीचे दिए गए कूट में से सही उत्तर चुनिए:
  1. Aa – I  b – II  c – IV  d – III
  2. Ba – II  b – III  c – I  d – IV
  3. Ca – II  b – IV  c – III  d – I
  4. Da – IV  b – I  c – III  d – II
Show answer

Concept: Key life-table identities: ex0=Txlx, qx=dxlx=2mx2+mx, Tx=Lx+Tx+1.

  1. Complete expectation of life ex0=Tx/lx ⇒ a–IV. Only code (D) contains a–IV.
  2. Tx is the cumulative person-years lived beyond age x, built up recursively from Tx+1 ⇒ d–II.
  3. The mortality-rate column is dx/lx (c–III), and its expression through the central death rate is 2mx2+mx (b–I).
  4. So the matching is a–IV, b–I, c–III, d–II.

Short trick: ex0=Tx/lx – spot this first and the code follows.

अवधारणा: मुख्य जीवन-सारणी सर्वसमिकाएँ: ex0=Txlx, qx=dxlx=2mx2+mx, Tx=Lx+Tx+1।

  1. पूर्ण जीवन प्रत्याशा ex0=Tx/lx ⇒ a–IV; केवल कूट (D) में a–IV है।
  2. Tx, आयु x के बाद जिए गए कुल व्यक्ति-वर्ष, Tx+1 से पुनरावर्ती रूप में बनता है ⇒ d–II।
  3. मृत्यु दर स्तंभ dx/lx (c–III) तथा केंद्रीय मृत्यु दर से उसका रूप 2mx2+mx (b–I)।
  4. अतः a–IV, b–I, c–III, d–II।

याद रखें: पहले ex0=Tx/lx पहचानें, कूट स्वयं मिल जाएगा।

UPHESC Assistant Professor StatisticsStatisticsLife table functionsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q69.
If r effects are confounded in a 2n factorial to have 2r blocks of size 2n−r units, the number of automatically confounded effects is
यदि r प्रभावों को 2n फैक्टोरियल में 2r ईकाइयो के 2n−r आकार के ब्लाक बनाने के लिए संयोजित किया जाता है तो स्वचालित रूप से संयोजित प्रभावों की संख्या हैं
  1. A2r−r
  2. Br2−r−1
  3. C2r−r−1
  4. DNone of the aboveउपरोक्त में से कोई नही
Show answer

Concept: With 2r blocks there are 2r−1 degrees of freedom between blocks, so 2r−1 effects are confounded in all.

  1. r of them are chosen independently.
  2. The rest are their generalised interactions, confounded automatically: 2r−1−r.
  3. E.g. r=2 (4 blocks): ABC and CDE chosen ⇒ ABDE confounded automatically: 22−2−1=1 ✓.

Short trick: Total confounded 2r−1; minus the r chosen = 2r−r−1.

अवधारणा: 2r खण्डों में खण्डों के बीच 2r−1 स्वातंत्र्य कोटियाँ, अतः कुल 2r−1 प्रभाव संकरित।

  1. इनमें से r स्वतंत्र रूप से चुने जाते हैं।
  2. शेष उनकी सामान्यीकृत अन्योन्यक्रियाएँ – स्वतः संकरित: 2r−r−1।
  3. उदा. r=2: ABC व CDE चुने ⇒ ABDE स्वतः संकरित (22−2−1=1)।

याद रखें: कुल 2r−1 में से r घटाएँ।

UPHESC Assistant Professor StatisticsStatisticsConfounding in <math display="inline" xmlns="http://www.w3.org/1998/Math/MathML"><msup><mn>2</mn><mi>n</mi></msup></math> factorialsUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2
Q70.
Moving average method of fitting trend in a time series data removed the effect of
समय शृंखला डेटा में प्रवृत्ति को मापने की चलती औसत विधि के प्रभाव को हटा दे
  1. ALong term variationsदीर्घकालिक विविधताएँ
  2. BShort term variationsअल्पकालिक विविधताएँ
  3. CCyclic variationचक्रीय विविधता
  4. DAll the aboveउपरोक्त सभी
Show answer

Concept: A moving average smooths the series: it irons out short-term fluctuations and leaves the long-term trend.

  1. Seasonal and other short-period oscillations (and irregular movements, largely) are averaged out, especially when the period of the moving average equals the period of the oscillation.
  2. The long-term variation is the trend itself – it is what the method measures, not what it removes, so 'all the above' is wrong.
  3. Cyclical swings are removed only if their period coincides with the M.A. period – a special case, not the general effect.

Short trick: Moving average = smoothing filter: short-term out, trend in.

अवधारणा: चल माध्य श्रेणी को समतल करता है: अल्पकालिक उतार-चढ़ाव हटाकर दीर्घकालिक प्रवृत्ति बचाता है।

  1. मौसमी व अन्य अल्पावधि दोलन (और अधिकांश अनियमित विचरण) औसत में समाप्त हो जाते हैं, विशेषतः जब चल माध्य की अवधि दोलन की अवधि के बराबर हो।
  2. दीर्घकालिक विचरण स्वयं प्रवृत्ति है – जिसे यह विधि मापती है, हटाती नहीं; अतः 'उपरोक्त सभी' गलत।
  3. चक्रीय विचरण तभी हटता है जब उसकी अवधि चल माध्य की अवधि से मेल खाए – विशेष स्थिति।

याद रखें: चल माध्य = समतलन: अल्पकालिक बाहर, प्रवृत्ति भीतर।

UPHESC Assistant Professor StatisticsStatisticsMoving averages in trend fittingUPHESC Assistant Professor Statistics 2025 · 17 Apr Shift 2