JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

225 questions in Physics.

Q181.
If a body of mass 1 kg falls on the earth from infinity, it attains velocity (v) and kinetic energy (k) on reaching the surface of earth. The values of v and k respectively are ________.
(Take radius of earth to be 6400 km and g=9.8 m/s2)
यदि 1 kg द्रव्यमान का एक पिण्ड अनन्त से पृथ्वी पर गिरता है, तो पृथ्वी की सतह पर पहुँचने पर वह वेग (v) तथा गतिज ऊर्जा (k) प्राप्त करता है। v तथा k के मान क्रमशः ________ हैं।
(पृथ्वी की त्रिज्या 6400 km तथा g=9.8 m/s2 लीजिए)
  1. A11.2 km/s; 6.27×107 J
  2. B11.2 km/s; 12.54×107 J
  3. C8.8 km/s; 6.27×107 J
  4. D8.8 km/s; 12.54×107 J
Show answer

Concept: By energy conservation, a body falling from rest at infinity reaches the surface with speed equal to the escape speed, v=2gR.

  1. v=2×9.8×6.4×106=1.2544×108=1.12×104 m/s=11.2 km/s.
  2. k=12mv2=12×1×1.2544×108=6.27×107 J.

Short trick: 11.2 km/s is the memorised escape speed; k=12v2=gR≈6.27×107 J for 1 kg — option (B) forgets the 12.

Answer: (A) 11.2 km/s; 6.27×107 J

अवधारणा: ऊर्जा संरक्षण से, अनन्त से विरामावस्था से गिरता पिण्ड सतह पर पलायन चाल के बराबर चाल से पहुँचता है, v=2gR।

  1. v=2×9.8×6.4×106=1.2544×108=1.12×104 m/s=11.2 km/s।
  2. k=12mv2=12×1×1.2544×108=6.27×107 J।

शॉर्ट ट्रिक: 11.2 km/s रटी हुई पलायन चाल है; 1 kg के लिए k=12v2=gR≈6.27×107 J — विकल्प (B) में 12 भूल गए हैं।

उत्तर: (A) 11.2 km/s; 6.27×107 J

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsGravitation – escape speed & energyJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q182.
In a screw gauge the zero of main scale reference line coincides with the fifth division of the circular scale when two studs are in contact. There are 100 divisions in circular scale and pitch of screw gauge is 0.1 mm. When diameter of a sphere is measured, the reading of main scale is 5 mm and 50th division of circular scale coincides with the reference line of main scale. The diameter of sphere is ________ mm.
एक स्क्रू गेज में दोनों स्टडों के सम्पर्क में होने पर वृत्ताकार पैमाने का पाँचवाँ भाग मुख्य पैमाने की सन्दर्भ रेखा के शून्य से सम्पाती होता है। वृत्ताकार पैमाने पर 100 भाग हैं तथा स्क्रू गेज का चूड़ी-अन्तराल (pitch) 0.1 mm है। एक गोले का व्यास मापने पर मुख्य पैमाने का पाठ्यांक 5 mm है तथा वृत्ताकार पैमाने का 50वाँ भाग मुख्य पैमाने की सन्दर्भ रेखा से सम्पाती होता है। गोले का व्यास ________ mm है।
  1. A5.045
  2. B5.055
  3. C5.450
  4. D5.550
Show answer

Concept: Least count =pitchno. of divisions; corrected reading = observed reading − zero error (positive zero error is subtracted).

  1. LC =0.1100=0.001 mm.
  2. Zero error =+5×0.001=+0.005 mm (5th division coincides when studs touch).
  3. Observed reading =5+50×0.001=5.050 mm.
  4. Diameter =5.050−0.005=5.045 mm.

Short trick: Effective circular reading =(50−5) divisions =45×0.001=0.045 mm ⇒5.045 mm in one line.

Answer: (A) 5.045

अवधारणा: अल्पतमांक =चूड़ी-अन्तरालभागों की संख्या; संशोधित पाठ्यांक = प्रेक्षित पाठ्यांक − शून्य त्रुटि (धनात्मक शून्य त्रुटि घटाई जाती है)।

  1. अल्पतमांक =0.1100=0.001 mm।
  2. शून्य त्रुटि =+5×0.001=+0.005 mm (स्टड सम्पर्क में होने पर 5वाँ भाग सम्पाती)।
  3. प्रेक्षित पाठ्यांक =5+50×0.001=5.050 mm।
  4. व्यास =5.050−0.005=5.045 mm।

शॉर्ट ट्रिक: प्रभावी वृत्ताकार पाठ्यांक =(50−5) भाग =45×0.001=0.045 mm ⇒ एक ही पंक्ति में 5.045 mm।

उत्तर: (A) 5.045

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMeasurement – screw gauge with zero errorJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q183.
The surface tension of a soap bubble is 0.03 N/m. The work done in increasing the diameter of bubble from 2 cm to 6 cm is απ×10−4 J. The value of α is ________. (Take π=3.14)
एक साबुन के बुलबुले का पृष्ठ तनाव 0.03 N/m है। बुलबुले का व्यास 2 cm से 6 cm करने में किया गया कार्य απ×10−4 J है। α का मान ________ है। (π=3.14 लीजिए)
  1. A0.86
  2. B0.64
  3. C1.92
  4. D7.68
Show answer

Concept: A soap bubble has two free surfaces, so W=TΔA=T×2×4π(r22−r12).

  1. Radii: r1=1 cm =0.01 m, r2=3 cm =0.03 m.
  2. ΔA=8π(0.032−0.012)=8π×8×10−4=64π×10−4 m2.
  3. W=0.03×64π×10−4=1.92π×10−4 J.
  4. So α=1.92.

Short trick: W=8πT(r22−r12) for a bubble; forgetting the two surfaces gives 0.96 (not offered), while (D) =4×1.92 is the distractor.

Answer: (C) 1.92

अवधारणा: साबुन के बुलबुले की दो मुक्त सतहें होती हैं, अतः W=TΔA=T×2×4π(r22−r12)।

  1. त्रिज्याएँ: r1=1 cm =0.01 m, r2=3 cm =0.03 m।
  2. ΔA=8π(0.032−0.012)=8π×8×10−4=64π×10−4 m2।
  3. W=0.03×64π×10−4=1.92π×10−4 J।
  4. अतः α=1.92।

शॉर्ट ट्रिक: बुलबुले के लिए W=8πT(r22−r12); दो सतहें भूलने पर 0.96 आता है (विकल्प में नहीं), जबकि (D) =4×1.92 भटकाने वाला विकल्प है।

उत्तर: (C) 1.92

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsSurface Tension – work in blowing a bubbleJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q184.
A mixture of carbon dioxide and oxygen has volume 8310 cm3, temperature 300 K, pressure 100 kPa and mass 13.2 g. The number of moles of carbon dioxide and oxygen gases in the mixture respectively are ________.
(Assume both carbon dioxide and oxygen gases behave like ideal gases)  [R = 8.31 J/mol.K]
कार्बन डाइऑक्साइड तथा ऑक्सीजन के एक मिश्रण का आयतन 8310 cm3, ताप 300 K, दाब 100 kPa तथा द्रव्यमान 13.2 g है। मिश्रण में कार्बन डाइऑक्साइड तथा ऑक्सीजन गैसों के मोलों की संख्या क्रमशः ________ है।
(मान लीजिए कि कार्बन डाइऑक्साइड तथा ऑक्सीजन दोनों गैसें आदर्श गैसों की भाँति व्यवहार करती हैं)  [R = 8.31 J/mol.K]
  1. A0.15 and 0.180.15 तथा 0.18
  2. B0.25 and 0.080.25 तथा 0.08
  3. C0.21 and 0.120.21 तथा 0.12
  4. D0.13 and 0.200.13 तथा 0.20
Show answer

Concept: Total moles from PV=nRT; then solve 44x+32y=13.2 with x+y=n (molar masses: CO2 = 44, O2 = 32 g/mol).

  1. n=PVRT=105×8310×10−68.31×300=8312493=13 mol.
  2. 44x+32(13−x)=13.2⇒12x=13.2−323=2.533.
  3. x=0.21 mol (CO2), y=13−0.21=0.12 mol (O2).
  4. Check: 44(0.21)+32(0.12)=9.24+3.84=13.1≈13.2 g ✓.

Short trick: The data is rigged so n=13 mol exactly; only option (C) has its pair summing to 0.33.

Answer: (C) 0.21 and 0.12

अवधारणा: PV=nRT से कुल मोल; फिर x+y=n के साथ 44x+32y=13.2 हल कीजिए (मोलर द्रव्यमान: CO2 = 44, O2 = 32 g/mol)।

  1. n=PVRT=105×8310×10−68.31×300=8312493=13 mol।
  2. 44x+32(13−x)=13.2⇒12x=13.2−323=2.533।
  3. x=0.21 mol (CO2), y=13−0.21=0.12 mol (O2)।
  4. जाँच: 44(0.21)+32(0.12)=9.24+3.84=13.1≈13.2 g ✓।

शॉर्ट ट्रिक: आँकड़े ऐसे चुने गए हैं कि n=13 mol ठीक-ठीक आता है; केवल विकल्प (C) के युग्म का योग 0.33 है।

उत्तर: (C) 0.21 तथा 0.12

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsKinetic Theory – ideal gas mixtureJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q185.
If an air bubble of diameter 2 mm rises steadily through a liquid of density 2000 kg/m3 at a rate of 0.5 cm/s, then the coefficient of viscosity of liquid is ________ Poise. (Take g = 10 m/s2)
यदि 2 mm व्यास का एक वायु का बुलबुला 2000 kg/m3 घनत्व के द्रव में 0.5 cm/s की दर से एकसमान रूप से ऊपर उठता है, तो द्रव का श्यानता गुणांक ________ प्वॉइज़ (Poise) है। (g = 10 m/s2 लीजिए)
  1. A0.88
  2. B8.8
  3. C88.8
  4. D0.088
Show answer

Concept: For steady (terminal) rise of a bubble, Stokes' drag balances the net upthrust: 6πηrv=43πr3(ρl−ρair)g, i.e. η=2r2ρlg9v (density of air negligible).

  1. r=1 mm=10−3 m, v=0.5 cm/s =5×10−3 m/s.
  2. η=2×(10−3)2×2000×109×5×10−3=4×10−24.5×10−2=0.89 Pa·s.
  3. 1 Pa·s =10 Poise ⇒η=8.9≈8.8 Poise.

Short trick: Compute in SI and multiply by 10 for Poise — options (A) and (B) differ exactly by this factor.

Answer: (B) 8.8

अवधारणा: बुलबुले के एकसमान (सीमान्त) वेग से उठने पर स्टोक्स कर्षण नेट उत्प्लावन बल को सन्तुलित करता है: 6πηrv=43πr3(ρl−ρair)g, अर्थात् η=2r2ρlg9v (वायु का घनत्व नगण्य)।

  1. r=1 mm=10−3 m, v=0.5 cm/s =5×10−3 m/s।
  2. η=2×(10−3)2×2000×109×5×10−3=4×10−24.5×10−2=0.89 Pa·s।
  3. 1 Pa·s =10 प्वॉइज़ ⇒η=8.9≈8.8 प्वॉइज़।

शॉर्ट ट्रिक: SI में निकालकर प्वॉइज़ के लिए 10 से गुणा कीजिए — विकल्प (A) तथा (B) ठीक इसी गुणक से भिन्न हैं।

उत्तर: (B) 8.8

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsViscosity – terminal velocity (Stokes' law)JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q186.
A spherical ball of mass 2 kg falls from a height of 10 m and is brought to rest after penetrating 10 cm into sand. The average force exerted by sand on the ball is ________ N.
(Take g=10 m/s2)
2 kg द्रव्यमान की एक गोलाकार गेंद 10 m ऊँचाई से गिरती है तथा रेत में 10 cm धँसने के बाद विरामावस्था में आ जाती है। गेंद पर रेत द्वारा लगाया गया औसत बल ________ N है।
(g=10 m/s2 लीजिए)
  1. A1980
  2. B2020
  3. C2000
  4. D1000
Show answer

Concept: Work–energy theorem over the whole journey: gravity acts through (h+d) while the sand's force acts through d, so F⋅d=mg(h+d).

  1. F=mg(1+hd)=2×10×(1+100.1).
  2. F=20×101=2020 N.

Short trick: F=mg(1+h/d); dropping the ball's own weight gives 2000 — the trap option (C). Net retardation force is 2000 N but the sand must also support the weight.

Answer: (B) 2020

अवधारणा: पूरी यात्रा पर कार्य–ऊर्जा प्रमेय: गुरुत्व (h+d) दूरी पर तथा रेत का बल d दूरी पर कार्य करता है, अतः F⋅d=mg(h+d)।

  1. F=mg(1+hd)=2×10×(1+100.1)।
  2. F=20×101=2020 N।

शॉर्ट ट्रिक: F=mg(1+h/d); गेंद का भार छोड़ देने पर 2000 आता है — फँसाने वाला विकल्प (C)। नेट मन्दक बल 2000 N है, परन्तु रेत को भार भी सँभालना पड़ता है।

उत्तर: (B) 2020

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWork–Energy – retarding force in sandJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q187.
An electromagnetic wave travels in free space along the x-direction. At a particular point in space and time, B→=2×10−7 j^ T is associated with this wave. The value of corresponding electric field E→ at this point is ________ V/m.
एक विद्युत चुम्बकीय तरंग मुक्त आकाश (free space) में x-दिशा के अनुदिश चलती है। आकाश एवं समय के किसी विशेष बिन्दु पर इस तरंग से सम्बद्ध B→=2×10−7 j^ T है। इस बिन्दु पर संगत विद्युत क्षेत्र E→ का मान ________ V/m है।
  1. A60 k^
  2. B−60 k^
  3. C30 k^
  4. D−600 k^
Show answer

Concept: In an EM wave E=cB, and E→×B→ must point along the direction of propagation (+i^ here).

  1. Magnitude: E=cB=3×108×2×10−7=60 V/m.
  2. Direction: need E^×j^=i^. Try E^=−k^: (−k^)×j^=−(k^×j^)=+i^ ✓.
  3. So E→=−60 k^ V/m.

Short trick: E^=v^×B^⋅c in vector form: c(i^×j^)B would be the B got from E; quickest is to test E^×B^=v^ on the options — only −k^ works with magnitude 60.

Answer: (B) −60 k^

अवधारणा: विद्युत चुम्बकीय तरंग में E=cB, तथा E→×B→ संचरण की दिशा (यहाँ +i^) के अनुदिश होना चाहिए।

  1. परिमाण: E=cB=3×108×2×10−7=60 V/m।
  2. दिशा: E^×j^=i^ चाहिए। E^=−k^ लेने पर: (−k^)×j^=−(k^×j^)=+i^ ✓।
  3. अतः E→=−60 k^ V/m।

शॉर्ट ट्रिक: विकल्पों पर E^×B^=v^ की जाँच कीजिए — परिमाण 60 के साथ केवल −k^ ही खरा उतरता है।

उत्तर: (B) −60 k^

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsEM Waves – E and B relationJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q188.
Two resistors of 200 Ω and 400 Ω are connected in series with a battery of 100 V. A bulb rated at 200 V, 100 W is connected across the 400 Ω resistance. The potential drop across the bulb is ________ V.
200 Ω तथा 400 Ω के दो प्रतिरोधक 100 V की बैटरी के साथ श्रेणीक्रम में जुड़े हैं। 200 V, 100 W अंकित एक बल्ब 400 Ω प्रतिरोध के सिरों पर जुड़ा है। बल्ब के सिरों पर विभव पतन ________ V है।
  1. A25
  2. B50
  3. C66.6
  4. D100
Show answer

Concept: The bulb behaves as a resistance Rb=Vrated2P=2002100=400 Ω in parallel with the 400 Ω resistor; then use the potential divider.

  1. Parallel combination: 400×400400+400=200 Ω.
  2. Total resistance =200+200=400 Ω; current I=100400=0.25 A.
  3. Drop across the bulb (parallel pair) =0.25×200=50 V.

Short trick: 400∥400=200 Ω equals the series 200 Ω, so the 100 V splits equally: 50 V each.

Answer: (B) 50

अवधारणा: बल्ब Rb=Vrated2P=2002100=400 Ω प्रतिरोध की भाँति 400 Ω प्रतिरोधक के समान्तर जुड़ा है; फिर विभव विभाजक लगाइए।

  1. समान्तर संयोजन: 400×400400+400=200 Ω।
  2. कुल प्रतिरोध =200+200=400 Ω; धारा I=100400=0.25 A।
  3. बल्ब (समान्तर युग्म) पर पतन =0.25×200=50 V।

शॉर्ट ट्रिक: 400∥400=200 Ω श्रेणी वाले 200 Ω के बराबर है, अतः 100 V बराबर बँटता है: 50 V–50 V।

उत्तर: (B) 50

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsCurrent Electricity – series-parallel circuitJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q189.
Two metal plates (A, B) are kept horizontally with separation of (12π) cm, with plate A on the top. An atomizer jet sprays oil (density 1.5 g/cm3) droplets of radius 1 mm horizontally. All oil droplets carry a charge 5 nC. The potentials VA and VB are required on plates A and B respectively in order to ensure the droplets do not descend. The values of VA and VB are ________.
(Neglect the air resistance to the droplets and take g=10 m/s2)
दो धातु की प्लेटें (A, B) क्षैतिज रूप से (12π) cm के अन्तराल पर रखी हैं, जिनमें प्लेट A ऊपर है। एक एटोमाइज़र जेट तेल (घनत्व 1.5 g/cm3) की 1 mm त्रिज्या की बूँदों का क्षैतिज छिड़काव करता है। सभी तेल की बूँदों पर 5 nC आवेश है। बूँदें नीचे न उतरें, इसके लिए प्लेटों A तथा B पर क्रमशः विभव VA तथा VB आवश्यक हैं। VA तथा VB के मान ________ हैं।
(बूँदों पर वायु प्रतिरोध नगण्य मानिए तथा g=10 m/s2 लीजिए)
  1. A100 V and 580 V100 V तथा 580 V
  2. B580 V and 100 V580 V तथा 100 V
  3. C60 V and 400 V60 V तथा 400 V
  4. D0 V and −200 V0 V तथा −200 V
Show answer

Concept: For a positively charged droplet to float, the electric force qE must balance mg, so E→ must point upward — the lower plate B must be at the higher potential, with VB−VA=Ed.

  1. m=43πr3ρ=43π(10−3)3×1500=2π×10−6 kg.
  2. E=mgq=2π×10−55×10−9=4π×103 V/m.
  3. VB−VA=Ed=4π×103×0.12π=480 V.
  4. Only option (A) gives VB−VA=580−100=480 V with B higher; in (B) the field would push the positive drops down, (C) gives 340 V and (D) has A higher.

Short trick: The π in d is planted to cancel the π of the drop's mass — the required difference is a clean 480 V.

Answer: (A) 100 V and 580 V

अवधारणा: धनावेशित बूँद को तैराए रखने के लिए विद्युत बल qE को mg सन्तुलित करना होगा, अतः E→ ऊपर की ओर हो — निचली प्लेट B उच्च विभव पर होनी चाहिए, जहाँ VB−VA=Ed।

  1. m=43πr3ρ=43π(10−3)3×1500=2π×10−6 kg।
  2. E=mgq=2π×10−55×10−9=4π×103 V/m।
  3. VB−VA=Ed=4π×103×0.12π=480 V।
  4. केवल विकल्प (A) में VB−VA=580−100=480 V है और B उच्च विभव पर है; (B) में क्षेत्र धनावेशित बूँदों को नीचे धकेलेगा, (C) में अन्तर 340 V है तथा (D) में A उच्च विभव पर है।

शॉर्ट ट्रिक: d में π जान-बूझकर रखा गया है ताकि बूँद के द्रव्यमान का π कट जाए — आवश्यक अन्तर सीधा 480 V है।

उत्तर: (A) 100 V तथा 580 V

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – charged drop in equilibriumJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q190.
Two point charges 8 μC and −2 μC are located at x=2 cm and x=4 cm, respectively on the x-axis. The ratio of electric flux due to these charges through two spheres of radii 3 cm and 5 cm with their centers at the origin is ________.
दो बिन्दु आवेश 8 μC तथा −2 μC, x-अक्ष पर क्रमशः x=2 cm तथा x=4 cm पर स्थित हैं। मूलबिन्दु पर केन्द्र वाले 3 cm तथा 5 cm त्रिज्याओं के दो गोलों से इन आवेशों के कारण विद्युत फ्लक्स का अनुपात ________ है।
  1. A4 : 1
  2. B3 : 4
  3. C4 : 3
  4. D4 : 5
Show answer

Concept: By Gauss's law, flux depends only on the enclosed charge: Φ=qencε0.

  1. Sphere of radius 3 cm encloses only the charge at x=2 cm: q1=8 μC.
  2. Sphere of radius 5 cm encloses both: q2=8−2=6 μC.
  3. Φ1Φ2=86=43.

Short trick: Radii never enter Gauss's law — just count what each sphere swallows: 8 : 6 = 4 : 3.

Answer: (C) 4 : 3

अवधारणा: गाउस के नियम से फ्लक्स केवल परिबद्ध आवेश पर निर्भर करता है: Φ=qencε0।

  1. 3 cm त्रिज्या का गोला केवल x=2 cm वाले आवेश को घेरता है: q1=8 μC।
  2. 5 cm त्रिज्या का गोला दोनों को घेरता है: q2=8−2=6 μC।
  3. Φ1Φ2=86=43।

शॉर्ट ट्रिक: गाउस के नियम में त्रिज्या कभी नहीं आती — बस गिनिए कि प्रत्येक गोला कितना आवेश निगलता है: 8 : 6 = 4 : 3।

उत्तर: (C) 4 : 3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – Gauss's lawJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q191.
One side of an equilateral prism is painted by a transparent material of refractive index n2. The refractive index of prism is 1.6. The minimum value of n2 required for total internal reflection from painted face is ________.
एक समबाहु प्रिज़्म का एक फलक n2 अपवर्तनांक के पारदर्शी पदार्थ से पेंट किया गया है। प्रिज़्म का अपवर्तनांक 1.6 है। पेंट किए गए फलक से पूर्ण आन्तरिक परावर्तन के लिए n2 का न्यूनतम आवश्यक मान ________ है।
  1. A33/1.6
  2. B3
  3. C3.2/3
  4. D43/5
Show answer

Concept: The ray enters normal to the left face (see figure), travels undeviated and strikes the painted base. For an equilateral prism this ray hits the base at an angle of incidence of 60∘. Total internal reflection at the prism–paint boundary needs sin⁡60∘≥n2n1.

  1. Angle at the base =60∘ (faces of an equilateral prism meet at 60∘).
  2. Limiting condition: n2=n1sin⁡60∘=1.6×32.
  3. n2=0.83=435≈1.386.

Short trick: TIR is possible only into a rarer medium, so n2 must be less than 1.6 — options (A) 3.25, (B) 1.73 and (C) 1.85 all exceed 1.6; only 435 survives.

Answer: (D) 43/5

अवधारणा: किरण बाएँ फलक पर अभिलम्बवत् प्रवेश करती है (चित्र देखिए), बिना विचलन चलकर पेंट किए आधार से टकराती है। समबाहु प्रिज़्म में यह किरण आधार पर 60∘ आपतन कोण बनाती है। प्रिज़्म–पेंट सीमा पर पूर्ण आन्तरिक परावर्तन के लिए sin⁡60∘≥n2n1 चाहिए।

  1. आधार पर कोण =60∘ (समबाहु प्रिज़्म के फलक 60∘ पर मिलते हैं)।
  2. सीमान्त प्रतिबन्ध: n2=n1sin⁡60∘=1.6×32।
  3. n2=0.83=435≈1.386।

शॉर्ट ट्रिक: पूर्ण आन्तरिक परावर्तन केवल विरल माध्यम की ओर सम्भव है, अतः n2 का मान 1.6 से कम होना चाहिए — विकल्प (A) 3.25, (B) 1.73 तथा (C) 1.85 सब 1.6 से बड़े हैं; केवल 435 बचता है।

उत्तर: (D) 43/5

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – total internal reflection in prismJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q192.
The figure given below shows an LCR series circuit with two switches S1 and S2. When switch S1 is closed keeping S2 open, the phase difference (ϕ) between the current and source voltage is 30∘ and phase difference is 60∘ when S2 is closed keeping S1 open. The value of (3L1−L2) is ________ H.
नीचे दिए गए चित्र में दो स्विचों S1 तथा S2 वाला एक LCR श्रेणी परिपथ दर्शाया गया है। S2 को खुला रखते हुए स्विच S1 बन्द करने पर धारा तथा स्रोत वोल्टता के बीच कलान्तर (ϕ) 30∘ है, तथा S1 को खुला रखते हुए S2 बन्द करने पर कलान्तर 60∘ है। (3L1−L2) का मान ________ H है।
  1. A92
  2. B29
  3. C13
  4. D3
Show answer

Concept: Closing S1 short-circuits L2, leaving a series C–R–L1 circuit; closing S2 short-circuits L1, leaving series L2–C–R. In each case tan⁡ϕ=XL−XCR.

  1. XC=1ωC=1300×100×10−6=1003 Ω.
  2. S1 closed: ωL1−XC=Rtan⁡30∘=R3.
  3. S2 closed: ωL2−XC=Rtan⁡60∘=3R.
  4. 3ωL1−ωL2=3XC+3R−XC−3R=2XC — the unknown R cancels.
  5. 3L1−L2=2XCω=2×100/3300=29 H.

Short trick: The combination 3L1−L2 is chosen precisely so that 3R cancels 3×R3; the answer is simply 2XCω=2ω2C.

Answer: (B) 29

अवधारणा: S1 बन्द करने पर L2 लघुपथित हो जाता है और श्रेणी C–R–L1 परिपथ बचता है; S2 बन्द करने पर L1 लघुपथित होकर श्रेणी L2–C–R बचता है। प्रत्येक दशा में tan⁡ϕ=XL−XCR।

  1. XC=1ωC=1300×100×10−6=1003 Ω।
  2. S1 बन्द: ωL1−XC=Rtan⁡30∘=R3।
  3. S2 बन्द: ωL2−XC=Rtan⁡60∘=3R।
  4. 3ωL1−ωL2=3XC+3R−XC−3R=2XC — अज्ञात R कट जाता है।
  5. 3L1−L2=2XCω=2×100/3300=29 H।

शॉर्ट ट्रिक: संयोजन 3L1−L2 इसीलिए चुना गया है कि 3R, 3×R3 से कट जाए; उत्तर सीधे 2XCω=2ω2C है।

उत्तर: (B) 29

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsAlternating Current – LCR phase relationsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q193.
A circular current loop of radius R is placed inside square loop of side length L (L≫R) such that they are co-planar and their centers coincide. The permeability of free space is μ0. The mutual inductance between circular loop and square loop is ________.
R त्रिज्या का एक वृत्ताकार धारा लूप, L भुजा वाले वर्गाकार लूप (L≫R) के भीतर इस प्रकार रखा है कि वे समतलीय हैं तथा उनके केन्द्र सम्पाती हैं। मुक्त आकाश की चुम्बकशीलता μ0 है। वृत्ताकार लूप तथा वर्गाकार लूप के बीच अन्योन्य प्रेरकत्व ________ है।
  1. A22μ0L2R
  2. B2μ0L2R
  3. C2μ0R2L
  4. D22μ0R2L
Show answer

Concept: Pass current I through the square loop; since L≫R the field at its centre, B=22μ0IπL, is uniform over the small circle. Then M=ΦI=B⋅πR2I.

  1. Each side of the square (distance L2, half-angles 45∘): Bside=μ0I4π(L/2)×2sin⁡45∘=2μ0I2πL.
  2. Four sides: B=22μ0IπL.
  3. M=BπR2I=22μ0IπL×πR2I=22μ0R2L — the π cancels.

Short trick: M must vanish as the square grows (L→∞), so it must carry R2L — kills (A) and (B) at sight; the factor from four sides at 45∘ is 22.

Answer: (D) 22μ0R2L

अवधारणा: वर्गाकार लूप में धारा I प्रवाहित कीजिए; L≫R होने से इसके केन्द्र पर क्षेत्र B=22μ0IπL छोटे वृत्त पर एकसमान माना जा सकता है। तब M=ΦI=B⋅πR2I।

  1. वर्ग की प्रत्येक भुजा (दूरी L2, अर्ध-कोण 45∘): Bside=μ0I4π(L/2)×2sin⁡45∘=2μ0I2πL।
  2. चार भुजाएँ: B=22μ0IπL।
  3. M=BπR2I=22μ0IπL×πR2I=22μ0R2L — π कट जाता है।

शॉर्ट ट्रिक: वर्ग के बड़ा होने (L→∞) पर M शून्य होना चाहिए, अतः इसमें R2L होगा — (A) तथा (B) तुरन्त निरस्त; 45∘ पर चार भुजाओं से गुणांक 22 आता है।

उत्तर: (D) 22μ0R2L

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – mutual inductanceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q194.
The binding energy per nucleon of 83209Bi is ________ MeV.
[Take m(83209Bi)=208.980388 u, mp=1.007825 u, mn=1.008665 u, 1 u =931 MeV/c2]
83209Bi की प्रति न्यूक्लिऑन बन्धन ऊर्जा ________ MeV है।
[m(83209Bi)=208.980388 u, mp=1.007825 u, mn=1.008665 u, 1 u =931 MeV/c2 लीजिए]
  1. A7.48
  2. B7.84
  3. C8.79
  4. D6.94
Show answer

Concept: Mass defect Δm=Zmp+Nmn−Mnucleus, binding energy =Δm×931 MeV, then divide by A=209. Here Z=83, N=126.

  1. 83×1.007825=83.649475 u; 126×1.008665=127.091790 u.
  2. Δm=83.649475+127.091790−208.980388=1.760877 u.
  3. BE =1.760877×931=1639.4 MeV.
  4. BE per nucleon =1639.4209=7.84 MeV.

Short trick: For heavy nuclei the curve of binding energy sits near 7.5–8 MeV/nucleon, so (C) 8.79 (the iron-peak value) and (D) 6.94 are physically off; the arithmetic settles (B).

Answer: (B) 7.84

अवधारणा: द्रव्यमान क्षति Δm=Zmp+Nmn−Mnucleus, बन्धन ऊर्जा =Δm×931 MeV, फिर A=209 से भाग दीजिए। यहाँ Z=83, N=126।

  1. 83×1.007825=83.649475 u; 126×1.008665=127.091790 u।
  2. Δm=83.649475+127.091790−208.980388=1.760877 u।
  3. बन्धन ऊर्जा =1.760877×931=1639.4 MeV।
  4. प्रति न्यूक्लिऑन बन्धन ऊर्जा =1639.4209=7.84 MeV।

शॉर्ट ट्रिक: भारी नाभिकों के लिए बन्धन ऊर्जा वक्र 7.5–8 MeV/न्यूक्लिऑन के पास रहता है, अतः (C) 8.79 (लोहे के शिखर का मान) तथा (D) 6.94 भौतिक रूप से असंगत हैं; गणना से (B) पक्का होता है।

उत्तर: (B) 7.84

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsNuclear Physics – binding energy per nucleonJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q195.
The equation of motion of a particle is given by x=asin⁡(50t+π3) cm. The particle will come to rest at time t1 and it will have zero acceleration at time t2. The t1 and t2 respectively are ________.
एक कण की गति का समीकरण x=asin⁡(50t+π3) cm है। कण समय t1 पर विरामावस्था में आएगा तथा समय t2 पर इसका त्वरण शून्य होगा। t1 तथा t2 क्रमशः ________ हैं।
  1. Aπ300 s, π75 s
  2. Bπ75 s, π300 s
  3. Cπ300 s, π25 s
  4. Dπ50 s, π100 s
Show answer

Concept: Velocity v=50acos⁡(50t+π3) vanishes when the phase is π2; acceleration ∝−sin⁡(50t+π3) vanishes when the phase is π (first instants after t=0).

  1. v=0: 50t1+π3=π2⇒50t1=π6⇒t1=π300 s.
  2. Acceleration =0: 50t2+π3=π⇒50t2=2π3⇒t2=2π150=π75 s.

Short trick: Rest happens at the extreme (phase π2), zero acceleration at the mean (phase π) — the extreme comes first, so t1<t2, which already eliminates (B) and (D).

Answer: (A) π300 s, π75 s

अवधारणा: वेग v=50acos⁡(50t+π3) तब शून्य होता है जब कला π2 हो; त्वरण ∝−sin⁡(50t+π3) तब शून्य होता है जब कला π हो (t=0 के बाद प्रथम क्षण)।

  1. v=0: 50t1+π3=π2⇒50t1=π6⇒t1=π300 s।
  2. त्वरण =0: 50t2+π3=π⇒50t2=2π3⇒t2=2π150=π75 s।

शॉर्ट ट्रिक: विराम चरम स्थिति पर (कला π2) तथा शून्य त्वरण माध्य स्थिति पर (कला π) होता है — चरम पहले आता है, अतः t1<t2, जिससे (B) तथा (D) पहले ही कट जाते हैं।

उत्तर: (A) π300 s, π75 s

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsSHM – velocity and acceleration zerosJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q196.
In a Young's double slit experiment, the intensity at some point on the screen is found to be 34 times of the maximum of the interference pattern. The path difference between the interfering waves at this point is λx where λ is wavelength of the incident light. The value of x is ________.
यंग के द्विझिरी प्रयोग में पर्दे के किसी बिन्दु पर तीव्रता, व्यतिकरण प्रतिरूप के महत्तम की 34 गुनी पाई जाती है। इस बिन्दु पर व्यतिकारी तरंगों के बीच पथान्तर λx है, जहाँ λ आपतित प्रकाश की तरंगदैर्घ्य है। x का मान ________ है।
Show answer

Concept: I=Imaxcos2⁡ϕ2, and path difference Δ=λ2πϕ.

  1. cos2⁡ϕ2=34⇒cos⁡ϕ2=32⇒ϕ2=π6.
  2. ϕ=π3 rad.
  3. Δ=λ2π×π3=λ6, so x=6.

Short trick: Memorise the trio: 3Imax4→Δ=λ6, Imax2→λ4, Imax4→λ3.

Answer: 6

अवधारणा: I=Imaxcos2⁡ϕ2, तथा पथान्तर Δ=λ2πϕ।

  1. cos2⁡ϕ2=34⇒cos⁡ϕ2=32⇒ϕ2=π6।
  2. ϕ=π3 rad।
  3. Δ=λ2π×π3=λ6, अतः x=6।

शॉर्ट ट्रिक: यह त्रिक याद रखिए: 3Imax4→Δ=λ6, Imax2→λ4, Imax4→λ3।

उत्तर: 6

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – intensity in YDSEJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q197.
Using Bohr's model, calculate the ratio of the magnetic fields generated due to the motion of the electrons in the 2nd and 4th orbits of hydrogen atom ________.
बोर मॉडल का उपयोग करके, हाइड्रोजन परमाणु की दूसरी (2nd) तथा चौथी (4th) कक्षाओं में इलेक्ट्रॉनों की गति के कारण उत्पन्न चुम्बकीय क्षेत्रों का अनुपात परिकलित कीजिए ________।
Show answer

Concept: The orbiting electron is a current loop: B=μ0i2r at the nucleus, with i=ev2πr. In Bohr's model v∝1n and r∝n2.

  1. i∝vr∝1/nn2=1n3.
  2. B∝ir∝1n3⋅n2=1n5.
  3. B2B4=(42)5=25=32.

Short trick: B∝n−5 is a standard Bohr result — halving n multiplies B by 25=32.

Answer: 32

अवधारणा: परिक्रमण करता इलेक्ट्रॉन एक धारा लूप है: नाभिक पर B=μ0i2r, जहाँ i=ev2πr। बोर मॉडल में v∝1n तथा r∝n2।

  1. i∝vr∝1/nn2=1n3।
  2. B∝ir∝1n3⋅n2=1n5।
  3. B2B4=(42)5=25=32।

शॉर्ट ट्रिक: B∝n−5 बोर मॉडल का मानक परिणाम है — n आधा होने पर B में 25=32 गुना वृद्धि होती है।

उत्तर: 32

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsAtoms – magnetic field in Bohr orbitsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q198.
5 moles of unknown gas is heated at constant volume from 10 °C to 20 °C. The molar specific heat of this gas at constant pressure cp=8 cal/mol.°C and R=8.36 J/mol.°C. The change in the internal energy of the gas is ________ calorie.
किसी अज्ञात गैस के 5 मोल को स्थिर आयतन पर 10 °C से 20 °C तक गर्म किया जाता है। इस गैस की स्थिर दाब पर मोलर विशिष्ट ऊष्मा cp=8 cal/mol.°C तथा R=8.36 J/mol.°C है। गैस की आन्तरिक ऊर्जा में परिवर्तन ________ कैलोरी है।
Show answer

Concept: ΔU=ncvΔT with cv=cp−R (Mayer's relation), taking R in calories.

  1. R=8.36 J=8.364.18=2 cal/mol.°C.
  2. cv=cp−R=8−2=6 cal/mol.°C.
  3. ΔU=5×6×(20−10)=300 calorie.

Short trick: 8.36 J is deliberately 2×4.18 — so R=2 cal and cv=6 instantly.

Answer: 300

अवधारणा: ΔU=ncvΔT, जहाँ cv=cp−R (मेयर सम्बन्ध), R को कैलोरी में लेते हुए।

  1. R=8.36 J=8.364.18=2 cal/mol.°C।
  2. cv=cp−R=8−2=6 cal/mol.°C।
  3. ΔU=5×6×(20−10)=300 कैलोरी।

शॉर्ट ट्रिक: 8.36 J जान-बूझकर 2×4.18 रखा गया है — अतः तुरन्त R=2 cal तथा cv=6।

उत्तर: 300

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – internal energy changeJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q199.
If sunlight is focused on a paper using convex lens, it starts burning the paper in shortest time when the lens is kept at 30 cm above the paper. If the radius of curvature of the lens is 60 cm then the refractive index of the lens material is α10. The value of α is ________.
यदि उत्तल लेंस से सूर्य के प्रकाश को एक कागज़ पर फोकस किया जाए, तो लेंस को कागज़ से 30 cm ऊपर रखने पर कागज़ सबसे कम समय में जलना प्रारम्भ करता है। यदि लेंस की वक्रता त्रिज्या 60 cm है, तो लेंस के पदार्थ का अपवर्तनांक α10 है। α का मान ________ है।
Show answer

Concept: Burning is fastest when the paper lies at the focus, so f=30 cm. For an equiconvex lens with |R1|=|R2|=60 cm, the lens maker's formula gives 1f=(μ−1)2R.

  1. 130=(μ−1)(160+160)=μ−130.
  2. μ−1=1⇒μ=2.
  3. μ=α10⇒α=20.

Short trick: For an equiconvex lens, μ=1+R2f=1+6060=2 in one step.

Answer: 20

अवधारणा: कागज़ फोकस पर होने पर सबसे जल्दी जलता है, अतः f=30 cm। |R1|=|R2|=60 cm वाले समद्विउत्तल लेंस के लिए लेंस मेकर सूत्र से 1f=(μ−1)2R।

  1. 130=(μ−1)(160+160)=μ−130।
  2. μ−1=1⇒μ=2।
  3. μ=α10⇒α=20।

शॉर्ट ट्रिक: समद्विउत्तल लेंस के लिए एक ही चरण में μ=1+R2f=1+6060=2।

उत्तर: 20

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – lens maker's formulaJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2
Q200.
Moment of inertia about an axis AB for a rod of mass 40 kg and length 3 m is same as that of a solid sphere of mass of 10 kg and radius R about an axis parallel to AB axis with separation of 3 m as shown in figure below. The value of R is given as α2. The value of α is ________.
नीचे चित्र में दर्शाए अनुसार, 40 kg द्रव्यमान तथा 3 m लम्बाई की एक छड़ का अक्ष AB के परितः जड़त्व आघूर्ण, 10 kg द्रव्यमान तथा R त्रिज्या के एक ठोस गोले के, AB अक्ष के समान्तर 3 m अन्तराल वाले अक्ष के परितः, जड़त्व आघूर्ण के बराबर है। R का मान α2 दिया गया है। α का मान ________ है।
Show answer

Concept: The rod's end lies on AB, so Irod=ML23. The sphere's centre is 3 m from AB; by the parallel-axis theorem its moment of inertia about the axis at separation 3 m is Isphere=25mR2+md2.

  1. Irod=40×323=120 kg·m2.
  2. Isphere=25×10×R2+10×32=4R2+90.
  3. 4R2+90=120⇒R2=7.5=152, so R=152≈2.74 m (less than 3 m, consistent with the figure).
  4. Comparing with R=α2: α=15.

Short trick: α=2R2=2×120−904=15.

Answer: 15

अवधारणा: छड़ का सिरा AB पर है, अतः Irod=ML23। गोले का केन्द्र AB से 3 m दूर है; समान्तर अक्ष प्रमेय से 3 m अन्तराल वाले अक्ष के परितः इसका जड़त्व आघूर्ण Isphere=25mR2+md2 है।

  1. Irod=40×323=120 kg·m2।
  2. Isphere=25×10×R2+10×32=4R2+90।
  3. 4R2+90=120⇒R2=7.5=152, अतः R=152≈2.74 m (3 m से कम, चित्र के अनुरूप)।
  4. R=α2 से तुलना करने पर: α=15।

शॉर्ट ट्रिक: α=2R2=2×120−904=15।

उत्तर: 15

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRotational Motion – moment of inertiaJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 2