JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

225 questions in Chemistry.

Q201.

The mass of iron converted into Fe3O4 by the action of 18 g of steam is :

(Given : Molar mass of H, O and Fe are 1, 16 and 56 g mol−1 respectively)

Assume iron is present in excess :

18 g भाप (steam) की क्रिया द्वारा Fe3O4 में परिवर्तित लोहे का द्रव्यमान है :

(दिया है : H, O तथा Fe के मोलर द्रव्यमान क्रमशः 1, 16 तथा 56 g mol−1 हैं)

मान लीजिए लोहा आधिक्य में उपस्थित है :

  1. A2.1 g
  2. B4.2 g
  3. C21 g
  4. D42 g
Show answer

Concept: Red-hot iron reacts with steam: 3Fe + 4H2O → Fe3O4 + 4H2.

  1. Moles of steam = 1818=1 mol; iron is in excess, so steam is the limiting reagent.
  2. From the equation, 4 mol H2O consume 3 mol Fe, so 1 mol steam converts 34=0.75 mol Fe.
  3. Mass of Fe = 0.75×56=42 g.

Short trick: mol Fe = (3/4) × mol steam, then multiply by 56.

Answer: (D) 42 g

अवधारणा: रक्त-तप्त लोहा भाप से अभिक्रिया करता है: 3Fe + 4H2O → Fe3O4 + 4H2।

  1. भाप के मोल = 1818=1 मोल; लोहा आधिक्य में है, अतः भाप सीमांत अभिकर्मक है।
  2. समीकरण से, 4 मोल H2O, 3 मोल Fe का उपयोग करते हैं, अतः 1 मोल भाप 34=0.75 मोल Fe को परिवर्तित करती है।
  3. Fe का द्रव्यमान = 0.75×56=42 g।

शॉर्ट ट्रिक: Fe के मोल = (3/4) × भाप के मोल, फिर 56 से गुणा कीजिए।

उत्तर: (D) 42 g

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryMole Concept – stoichiometryJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q202.

What is the energy (in J atom−1) required for the following process ?

Li2+(g) → Li3+(g) + e−

(Take the ionization energy for the H atom in the ground state as 2.18×10−18 J atom−1)

निम्नलिखित प्रक्रम के लिए आवश्यक ऊर्जा (J atom−1 में) क्या है ?

Li2+(g) → Li3+(g) + e−

(मूल अवस्था में H परमाणु की आयनन ऊर्जा 2.18×10−18 J atom−1 लीजिए)

  1. A8.72×10−18
  2. B1.962×10−18
  3. C1.962×10−17
  4. D6.54×10−17
Show answer

Concept: Li2+ is a hydrogen-like species (one electron, Z=3). Ionisation energy of a hydrogen-like species = IEH×Z2n2.

  1. The given process removes the only electron of Li2+ from its ground state (n=1).
  2. E=2.18×10−18×3212=2.18×10−18×9
  3. E=1.962×10−17 J atom−1.

Short trick: For H-like ions just multiply IEH by Z2.

Answer: (C) 1.962×10−17

अवधारणा: Li2+ एक हाइड्रोजन-सदृश स्पीशीज़ है (एक इलेक्ट्रॉन, Z=3)। हाइड्रोजन-सदृश स्पीशीज़ की आयनन ऊर्जा = IEH×Z2n2।

  1. दिए गए प्रक्रम में Li2+ का एकमात्र इलेक्ट्रॉन उसकी मूल अवस्था (n=1) से निकाला जाता है।
  2. E=2.18×10−18×3212=2.18×10−18×9
  3. E=1.962×10−17 J atom−1।

शॉर्ट ट्रिक: H-सदृश आयनों के लिए IEH को केवल Z2 से गुणा कीजिए।

उत्तर: (C) 1.962×10−17

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAtomic Structure – Bohr modelJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q203.

Given below are two statements :

Statement (I) : The correct sequence of bond lengths in the following species is :
O2+ < O2 < O2− < O22−

Statement (II) : The correct sequence of number of unpaired electrons in the following species is :
O2 > O2+ > O2− > O22−

In the light of the above statements, choose the correct answer from the options given below :

नीचे दो कथन दिए गए हैं :

कथन (I) : निम्नलिखित स्पीशीज़ में आबंध लम्बाइयों का सही क्रम है :
O2+ < O2 < O2− < O22−

कथन (II) : निम्नलिखित स्पीशीज़ में अयुग्मित इलेक्ट्रॉनों की संख्या का सही क्रम है :
O2 > O2+ > O2− > O22−

उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: By MOT, bond order (B.O.) of O2+, O2, O2−, O22− are 2.5, 2, 1.5 and 1; bond length varies inversely with bond order.

  1. Bond length: higher B.O. → shorter bond, so O2+ < O2 < O2− < O22−. Statement I is true.
  2. Unpaired electrons: O2 has 2 (in π∗), O2+ has 1, O2− has 1, O22− has 0.
  3. Since O2+ and O2− have an equal number (1 each), the strict order O2+ > O2− is wrong. Statement II is false.
  4. So (A), (B) and (D) are ruled out.

Answer: (C) Statement I is true but Statement II is false

अवधारणा: MOT के अनुसार O2+, O2, O2−, O22− की आबंध कोटि क्रमशः 2.5, 2, 1.5 तथा 1 है; आबंध लम्बाई, आबंध कोटि के व्युत्क्रमानुपाती होती है।

  1. आबंध लम्बाई: अधिक आबंध कोटि → छोटा आबंध, अतः O2+ < O2 < O2− < O22−। कथन I सत्य है।
  2. अयुग्मित इलेक्ट्रॉन: O2 में 2 (π∗ में), O2+ में 1, O2− में 1, O22− में 0।
  3. चूँकि O2+ तथा O2− में अयुग्मित इलेक्ट्रॉनों की संख्या समान (1-1) है, अतः O2+ > O2− का कठोर क्रम गलत है। कथन II असत्य है।
  4. अतः विकल्प (A), (B) तथा (D) निरस्त हो जाते हैं।

उत्तर: (C) कथन I सत्य है परन्तु कथन II असत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryChemical Bonding – molecular orbital theoryJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q204.

Consider the following data.

(i)  2Al(s) + 6HCl(aq) → Al2Cl6(aq) + 3H2(g) + 1200 kJ/mol

(ii)  H2(g) + Cl2(g) → 2HCl(g) + 164 kJ/mol.

(iii)  HCl(g) + aq → HCl(aq) + 83 kJ/mol.

(iv)  Al2Cl6(s) + aq → Al2Cl6(aq) + 663 kJ/mol

The enthalpy of formation of anhydrous solid Al2Cl6 is :

निम्नलिखित आँकड़ों पर विचार कीजिए।

(i)  2Al(s) + 6HCl(aq) → Al2Cl6(aq) + 3H2(g) + 1200 kJ/mol

(ii)  H2(g) + Cl2(g) → 2HCl(g) + 164 kJ/mol.

(iii)  HCl(g) + aq → HCl(aq) + 83 kJ/mol.

(iv)  Al2Cl6(s) + aq → Al2Cl6(aq) + 663 kJ/mol

निर्जल ठोस Al2Cl6 की विरचन एन्थैल्पी है :

  1. A−648 kJ mol−1
  2. B−1350 kJ mol−1
  3. C−2002 kJ mol−1
  4. D−1527 kJ mol−1
Show answer

Concept: Hess's law – the heats written on the product side are evolved heats, so ΔH1 = −1200, ΔH2 = −164, ΔH3 = −83, ΔH4 = −663 kJ mol−1. Target: 2Al(s) + 3Cl2(g) → Al2Cl6(s).

  1. Combine: target = (i) + 3 × (ii) + 6 × (iii) − (iv). [3×(ii) + 6×(iii) make 6HCl(aq); reversing (iv) converts Al2Cl6(aq) to Al2Cl6(s).]
  2. ΔHf=(−1200)+3(−164)+6(−83)−(−663)
  3. =−1200−492−498+663=−1527 kJ mol−1.

Answer: (D) −1527 kJ mol−1

अवधारणा: हेस का नियम – उत्पाद की ओर लिखी ऊष्माएँ उत्सर्जित ऊष्माएँ हैं, अतः ΔH1 = −1200, ΔH2 = −164, ΔH3 = −83, ΔH4 = −663 kJ mol−1। लक्ष्य अभिक्रिया: 2Al(s) + 3Cl2(g) → Al2Cl6(s)।

  1. संयोजन: लक्ष्य = (i) + 3 × (ii) + 6 × (iii) − (iv)। [3×(ii) + 6×(iii) से 6HCl(aq) बनता है; (iv) को उलटने पर Al2Cl6(aq), Al2Cl6(s) में बदलता है।]
  2. ΔHf=(−1200)+3(−164)+6(−83)−(−663)
  3. =−1200−492−498+663=−1527 kJ mol−1।

उत्तर: (D) −1527 kJ mol−1

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – Hess's lawJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q205.

19.5 g of fluoro acetic acid (molar mass = 78 g mol−1) is dissolved in 500 g of water at 298 K. The depression in the freezing point of water was 1°C. What is Ka of fluoro acetic acid ? (For water, Kf = 1.86 K kg mol−1). Assume molarity and molality to have same values.

298 K पर 19.5 g फ्लुओरो ऐसीटिक अम्ल (मोलर द्रव्यमान = 78 g mol−1) को 500 g जल में घोला जाता है। जल के हिमांक में अवनमन 1°C था। फ्लुओरो ऐसीटिक अम्ल का Ka क्या है ? (जल के लिए, Kf = 1.86 K kg mol−1)। मोलरता तथा मोललता के मान समान मान लीजिए।

  1. A10−6
  2. B4×10−4
  3. C3×10−5
  4. D3×10−3
Show answer

Concept: ΔTf=iKfm; for a weak monoprotic acid i=1+α and Ka=Cα21−α.

  1. Moles of acid = 19.578=0.25; molality m=0.250.5=0.5 mol kg−1.
  2. i=ΔTfKfm=11.86×0.5=1.0753, so α=i−1=0.0753.
  3. Ka=Cα21−α=0.5×(0.0753)20.9247≈3.07×10−3≈3×10−3.

Answer: (D) 3×10−3

अवधारणा: ΔTf=iKfm; दुर्बल एकक्षारकीय अम्ल के लिए i=1+α तथा Ka=Cα21−α।

  1. अम्ल के मोल = 19.578=0.25; मोललता m=0.250.5=0.5 mol kg−1।
  2. i=ΔTfKfm=11.86×0.5=1.0753, अतः α=i−1=0.0753।
  3. Ka=Cα21−α=0.5×(0.0753)20.9247≈3.07×10−3≈3×10−3।

उत्तर: (D) 3×10−3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistrySolutions – depression in freezing pointJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q206.

The solubility product constants of Ag2CrO4 and AgBr are 32x and 4y respectively at 298 K.

The value of (molarity of Ag2CrO4molarity of AgBr) can be expressed as :

298 K पर Ag2CrO4 तथा AgBr के विलेयता गुणनफल स्थिरांक क्रमशः 32x तथा 4y हैं।

(Ag2CrO4 (मोलरता)AgBr (मोलरता)) का मान व्यक्त किया जा सकता है :

  1. A2x3y
  2. B2xy
  3. Cxy
  4. Dx3y
Show answer

Concept: For Ag2CrO4 (2:1 salt), Ksp=4s3; for AgBr (1:1 salt), Ksp=s′2, where s, s′ are molar solubilities (molarity of saturated solution).

  1. Ag2CrO4: 4s3=32x⇒s3=8x⇒s=2x3.
  2. AgBr: s′2=4y⇒s′=2y.
  3. Ratio =2x32y=x3y.

Answer: (D) x3y

अवधारणा: Ag2CrO4 (2:1 लवण) के लिए Ksp=4s3; AgBr (1:1 लवण) के लिए Ksp=s′2, जहाँ s, s′ मोलर विलेयताएँ (संतृप्त विलयन की मोलरता) हैं।

  1. Ag2CrO4: 4s3=32x⇒s3=8x⇒s=2x3।
  2. AgBr: s′2=4y⇒s′=2y।
  3. अनुपात =2x32y=x3y।

उत्तर: (D) x3y

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryIonic Equilibrium – solubility productJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q207.

An electrochemical cell is constructed using half cells in the direction of spontaneous change

Fe(OH)2(s) + 2e− → Fe(s) + 2OH−(aq)      E0 = −0.88 V

and AgBr(s) + e− → Ag(s) + Br−(aq)      E0 = +0.07 V

Which of the following option is correct ?

स्वतः परिवर्तन की दिशा में अर्ध-सेलों का उपयोग करके एक विद्युत्-रासायनिक सेल बनाया गया है

Fe(OH)2(s) + 2e− → Fe(s) + 2OH−(aq)      E0 = −0.88 V

तथा AgBr(s) + e− → Ag(s) + Br−(aq)      E0 = +0.07 V

निम्नलिखित में से कौन सा विकल्प सही है ?

  1. AOverall reaction  Fe(s) + 2OH−(aq) + 2AgBr(s) ⇌ Fe(OH)2(s) + 2Ag(s) + 2Br−(aq)समग्र अभिक्रिया  Fe(s) + 2OH−(aq) + 2AgBr(s) ⇌ Fe(OH)2(s) + 2Ag(s) + 2Br−(aq)
  2. BEθcell = −0.95 V
  3. CFe is reduced in the electrochemical cellविद्युत्-रासायनिक सेल में Fe अपचयित होता है
  4. DEθcell is an extensive propertyEθcell एक विस्तीर्ण (extensive) गुणधर्म है
Show answer

Concept: For a spontaneous cell, the half cell with higher (more positive) reduction potential acts as cathode; Ecell0=Ecathode0−Eanode0 must be positive.

  1. Cathode (reduction): AgBr(s) + e− → Ag(s) + Br− (E0=+0.07 V). Anode (oxidation): Fe(s) + 2OH− → Fe(OH)2(s) + 2e−.
  2. Overall: Fe(s) + 2OH−(aq) + 2AgBr(s) ⇌ Fe(OH)2(s) + 2Ag(s) + 2Br−(aq) — exactly option (A).
  3. (B) is wrong: Ecell0=0.07−(−0.88)=+0.95 V, not −0.95 V.
  4. (C) is wrong: Fe is oxidised (Fe → Fe(OH)2), not reduced.
  5. (D) is wrong: electrode potential is an intensive property — it does not depend on the amount of substance.

Answer: (A)

अवधारणा: स्वतः चालित सेल में अधिक (अधिक धनात्मक) अपचयन विभव वाला अर्ध-सेल कैथोड होता है; Ecell0=Ecathode0−Eanode0 धनात्मक होना चाहिए।

  1. कैथोड (अपचयन): AgBr(s) + e− → Ag(s) + Br− (E0=+0.07 V)। ऐनोड (ऑक्सीकरण): Fe(s) + 2OH− → Fe(OH)2(s) + 2e−।
  2. समग्र अभिक्रिया: Fe(s) + 2OH−(aq) + 2AgBr(s) ⇌ Fe(OH)2(s) + 2Ag(s) + 2Br−(aq) — यही विकल्प (A) है।
  3. (B) गलत है: Ecell0=0.07−(−0.88)=+0.95 V, −0.95 V नहीं।
  4. (C) गलत है: Fe का ऑक्सीकरण होता है (Fe → Fe(OH)2), अपचयन नहीं।
  5. (D) गलत है: इलेक्ट्रोड विभव एक मात्रा-निरपेक्ष (intensive) गुणधर्म है — यह पदार्थ की मात्रा पर निर्भर नहीं करता।

उत्तर: (A)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryElectrochemistry – galvanic cellJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q208.

t100% is the time required for the 100% completion of the reaction while t1/2 is the time required for 50% of the reaction to be completed. Which of the following option correctly represents the relation between t100% and t1/2 for zero and first order reactions respectively ?

t100% अभिक्रिया के 100% पूर्ण होने के लिए आवश्यक समय है जबकि t1/2 अभिक्रिया के 50% पूर्ण होने के लिए आवश्यक समय है। निम्नलिखित में से कौन सा विकल्प क्रमशः शून्य तथा प्रथम कोटि की अभिक्रियाओं के लिए t100% तथा t1/2 के बीच संबंध को सही रूप से निरूपित करता है ?

  1. At100%=(t1/2)2 and t100%=(t1/2)−∞t100%=(t1/2)2 तथा t100%=(t1/2)−∞
  2. Bt100%=2t1/2 and t100%=(t1/2)∞t100%=2t1/2 तथा t100%=(t1/2)∞
  3. Ct100%=2t1/2 and t100%=(2t1/2)2t100%=2t1/2 तथा t100%=(2t1/2)2
  4. Dt100%=(t1/2)∞ and t100%=2t1/2t100%=(t1/2)∞ तथा t100%=2t1/2
Show answer

Concept: Zero order: [A]=[A]0−kt (finishes in finite time). First order: [A]=[A]0e−kt (never reaches exactly zero).

  1. Zero order: t1/2=[A]02k and t100%=[A]0k, so t100%=2t1/2.
  2. First order: the concentration decays exponentially, so 100% completion needs infinite time — represented as t100%=(t1/2)∞ (i.e. infinitely many half-lives).
  3. Only option (B) gives this pair in the order zero, first.

Answer: (B)

अवधारणा: शून्य कोटि: [A]=[A]0−kt (सीमित समय में पूर्ण)। प्रथम कोटि: [A]=[A]0e−kt (सांद्रता कभी ठीक शून्य नहीं होती)।

  1. शून्य कोटि: t1/2=[A]02k तथा t100%=[A]0k, अतः t100%=2t1/2।
  2. प्रथम कोटि: सांद्रता चरघातांकी रूप से घटती है, अतः 100% पूर्णता के लिए अनंत समय चाहिए — जिसे t100%=(t1/2)∞ (अर्थात् अनंत अर्ध-आयु) से निरूपित किया गया है।
  3. केवल विकल्प (B) ही यह युग्म शून्य, प्रथम के क्रम में देता है।

उत्तर: (B)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryChemical Kinetics – order of reactionJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q209.

Given below are two statements :

Statement (I) : The first ionisation enthalpy of the elements Na, Mg, Cl and Ar follows the order Na > Mg > Cl > Ar.

Statement (II) : Among Ca, Al, Fe and B, the third ionisation enthalpy is very high for Ca.

In the light of the above statements, choose the correct answer from the options given below :

नीचे दो कथन दिए गए हैं :

कथन (I) : तत्वों Na, Mg, Cl तथा Ar की प्रथम आयनन एन्थैल्पी का क्रम Na > Mg > Cl > Ar है।

कथन (II) : Ca, Al, Fe तथा B में से, Ca के लिए तृतीय आयनन एन्थैल्पी बहुत उच्च होती है।

उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: First ionisation enthalpy generally increases across a period; removal of an electron from a noble-gas configuration needs exceptionally high energy.

  1. Statement I: across period 3 the actual order is Ar > Cl > Mg > Na (noble gas Ar highest, alkali metal Na lowest) — the given order Na > Mg > Cl > Ar is exactly reversed. Statement I is false.
  2. Statement II: Ca2+ has the stable noble-gas configuration [Ar]; removing a third electron breaks this core, so IE3(Ca) ≈ 4912 kJ mol−1 is far higher than IE3 of Al (removes 3s1 of Al2+), of Fe (gives stable 3d5 Fe3+) or of B. Statement II is true.

Answer: (D) Statement I is false but Statement II is true

अवधारणा: आवर्त में बाएँ से दाएँ प्रथम आयनन एन्थैल्पी सामान्यतः बढ़ती है; उत्कृष्ट गैस विन्यास से इलेक्ट्रॉन निकालने में असाधारण रूप से उच्च ऊर्जा लगती है।

  1. कथन I: आवर्त 3 में वास्तविक क्रम Ar > Cl > Mg > Na है (उत्कृष्ट गैस Ar सर्वाधिक, क्षार धातु Na न्यूनतम) — दिया गया क्रम Na > Mg > Cl > Ar ठीक उल्टा है। कथन I असत्य है।
  2. कथन II: Ca2+ का विन्यास स्थायी उत्कृष्ट गैस [Ar] है; तीसरा इलेक्ट्रॉन निकालने पर यह कोर टूटता है, अतः IE3(Ca) ≈ 4912 kJ mol−1, Al (Al2+ का 3s1 निकलता है), Fe (स्थायी 3d5 Fe3+ बनता है) तथा B की IE3 से कहीं अधिक है। कथन II सत्य है।

उत्तर: (D) कथन I असत्य है परन्तु कथन II सत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryPeriodic Properties – ionisation enthalpyJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q210.

Given below are two statements :

Statement (I) : Oxidising power of halogens decreases in the order F2 > Cl2 > Br2 > I2, which is the basis of "Layer test".

Statement (II) : "Layer test" to identify Br2 and I2 in aqueous solution involves the oxidation of bromide or iodide into Br2 or I2 respectively with Cl2, which is a type of displacement redox reaction.

In the light of the above statements, choose the correct answer from the options given below :

नीचे दो कथन दिए गए हैं :

कथन (I) : हैलोजनों की ऑक्सीकारक क्षमता F2 > Cl2 > Br2 > I2 क्रम में घटती है, जो "परत परीक्षण (Layer test)" का आधार है।

कथन (II) : जलीय विलयन में Br2 तथा I2 की पहचान के लिए "परत परीक्षण" में Cl2 द्वारा ब्रोमाइड अथवा आयोडाइड का क्रमशः Br2 अथवा I2 में ऑक्सीकरण होता है, जो एक प्रकार की विस्थापन रेडॉक्स अभिक्रिया है।

उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: A halogen higher in the group displaces a lower halide from solution because oxidising power falls down the group.

  1. Statement I: oxidising power F2 > Cl2 > Br2 > I2 (large negative electron-gain enthalpy + high hydration tendency for the lighter halogens). This superior oxidising power of Cl2 is indeed what the layer test exploits. True.
  2. Statement II: in the layer test, chlorine water oxidises Br− → Br2 (orange-brown in organic layer) and I− → I2 (violet in organic layer): Cl2 + 2Br− → 2Cl− + Br2; Cl2 + 2I− → 2Cl− + I2. This is a displacement (redox) reaction. True.

Answer: (A) Both Statement I and Statement II are true

अवधारणा: समूह में ऊपर स्थित हैलोजन, नीचे वाले हैलाइड को विलयन से विस्थापित कर देता है, क्योंकि समूह में नीचे जाने पर ऑक्सीकारक क्षमता घटती है।

  1. कथन I: ऑक्सीकारक क्षमता F2 > Cl2 > Br2 > I2 (हल्के हैलोजनों की उच्च ऋणात्मक इलेक्ट्रॉन-लब्धि एन्थैल्पी तथा जलयोजन प्रवृत्ति)। Cl2 की यही श्रेष्ठ ऑक्सीकारक क्षमता परत परीक्षण का आधार है। सत्य।
  2. कथन II: परत परीक्षण में क्लोरीन जल Br− → Br2 (कार्बनिक परत में नारंगी-भूरा) तथा I− → I2 (कार्बनिक परत में बैंगनी) का ऑक्सीकरण करता है: Cl2 + 2Br− → 2Cl− + Br2; Cl2 + 2I− → 2Cl− + I2। यह विस्थापन (रेडॉक्स) अभिक्रिया है। सत्य।

उत्तर: (A) कथन I और कथन II दोनों सत्य हैं

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)Chemistryp-Block – halogens, layer testJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q211.

Which of the following sets includes all the species that will change the orange colour of K2Cr2O7 in acidic medium ?

निम्नलिखित में से कौन सा सेट उन सभी स्पीशीज़ को सम्मिलित करता है जो अम्लीय माध्यम में K2Cr2O7 के नारंगी रंग को परिवर्तित कर देंगी ?

  1. AFe2+, Sn2+, I−, S2−
  2. BS2−, Fe3+, I−, C2O42−
  3. CFe2+, NO2−, SO2, Sn4+
  4. DFe3+, SO42−, S2−, Sn4+
Show answer

Concept: Acidified K2Cr2O7 is a strong oxidant; its orange colour changes to green (Cr3+) only when a reducing species is present: Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O.

  1. (A): Fe2+ → Fe3+, Sn2+ → Sn4+, I− → I2, S2− → S — all four are reducing agents, so each changes the colour. Correct set.
  2. (B) is wrong: Fe3+ is already in its higher state and cannot reduce dichromate.
  3. (C) is wrong: Sn4+ is not a reducing agent (Fe2+, NO2−, SO2 are).
  4. (D) is wrong: Fe3+, SO42− and Sn4+ cannot be oxidised by dichromate.

Answer: (A)

अवधारणा: अम्लीकृत K2Cr2O7 प्रबल ऑक्सीकारक है; इसका नारंगी रंग केवल अपचायक स्पीशीज़ की उपस्थिति में हरे (Cr3+) में बदलता है: Cr2O72− + 14H+ + 6e− → 2Cr3+ + 7H2O।

  1. (A): Fe2+ → Fe3+, Sn2+ → Sn4+, I− → I2, S2− → S — चारों अपचायक हैं, अतः प्रत्येक रंग बदल देगा। सही सेट।
  2. (B) गलत है: Fe3+ पहले से उच्चतर अवस्था में है और डाइक्रोमेट का अपचयन नहीं कर सकता।
  3. (C) गलत है: Sn4+ अपचायक नहीं है (Fe2+, NO2−, SO2 हैं)।
  4. (D) गलत है: Fe3+, SO42− तथा Sn4+ का डाइक्रोमेट द्वारा ऑक्सीकरण संभव नहीं।

उत्तर: (A)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryRedox – dichromate as oxidantJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q212.

Match List - I with List - II.

List - I
Chromium (III) Complexes
(en = ethylene diamine)
List - II
Δ0(cm−1)
A.[Cr(CN)6]3−I.15,060
B.[CrF6]3−II.17,400
C.[Cr(H2O)6]3+III.22,300
D.[Cr(en)3]3+IV.26,600

Choose the correct answer from the options given below :

सूची-I का सूची-II से मिलान कीजिए।

सूची-I
क्रोमियम (III) संकुल
(en = एथिलीन डाइऐमीन)
सूची-II
Δ0(cm−1)
A.[Cr(CN)6]3−I.15,060
B.[CrF6]3−II.17,400
C.[Cr(H2O)6]3+III.22,300
D.[Cr(en)3]3+IV.26,600

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. AA-I, B-II, C-III, D-IV
  2. BA-II, B-III, C-IV, D-I
  3. CA-III, B-IV, C-I, D-II
  4. DA-IV, B-I, C-II, D-III
Show answer

Concept: For the same metal ion Cr3+, Δ0 increases with ligand field strength along the spectrochemical series: F− < H2O < en < CN−.

  1. Weakest ligand F− → smallest Δ0: B-I (15,060 cm−1).
  2. H2O next: C-II (17,400 cm−1).
  3. en (strong field chelate): D-III (22,300 cm−1).
  4. Strongest ligand CN− → largest Δ0: A-IV (26,600 cm−1).

Short trick: Just rank the ligands on the spectrochemical series and pair smallest-with-smallest.

Answer: (D) A-IV, B-I, C-II, D-III

अवधारणा: एक ही धातु आयन Cr3+ के लिए, Δ0 स्पेक्ट्रमरासायनिक श्रेणी में लिगैंड क्षेत्र सामर्थ्य के साथ बढ़ता है: F− < H2O < en < CN−।

  1. सबसे दुर्बल लिगैंड F− → न्यूनतम Δ0: B-I (15,060 cm−1)।
  2. इसके बाद H2O: C-II (17,400 cm−1)।
  3. en (प्रबल क्षेत्र कीलेट): D-III (22,300 cm−1)।
  4. सबसे प्रबल लिगैंड CN− → अधिकतम Δ0: A-IV (26,600 cm−1)।

शॉर्ट ट्रिक: लिगैंडों को स्पेक्ट्रमरासायनिक श्रेणी में क्रमबद्ध कर सबसे छोटे को सबसे छोटे से मिलाइए।

उत्तर: (D) A-IV, B-I, C-II, D-III

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryCoordination Compounds – crystal field splittingJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q213.

Given below are two statements :

Statement (I) : 1,2,3-Trihydroxypropane can be separated from water by simple distillation.

Statement (II) : An azeotropic mixture cannot be separated by fractional distillation.

In the light of the above statements, choose the correct answer from the options given below :

नीचे दो कथन दिए गए हैं :

कथन (I) : 1,2,3-ट्राइहाइड्रॉक्सीप्रोपेन को जल से साधारण आसवन (simple distillation) द्वारा पृथक् किया जा सकता है।

कथन (II) : स्थिरक्वाथी मिश्रण (azeotropic mixture) को प्रभाजी आसवन द्वारा पृथक् नहीं किया जा सकता।

उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: 1,2,3-trihydroxypropane is glycerol; liquids that decompose at or below their boiling points are distilled under reduced pressure, while azeotropes boil at a constant composition.

  1. Statement I: glycerol boils near 290 °C and decomposes at its boiling point, so it cannot be recovered by simple distillation; it is separated (e.g. from spent-lye) by distillation under reduced pressure. False.
  2. Statement II: an azeotrope boils like a pure liquid — vapour and liquid have the same composition — so fractional distillation cannot change its composition or separate its components. True.

Answer: (D) Statement I is false but Statement II is true

अवधारणा: 1,2,3-ट्राइहाइड्रॉक्सीप्रोपेन ग्लिसरॉल है; जो द्रव अपने क्वथनांक पर या उससे पहले अपघटित हो जाते हैं उनका आसवन कम दाब पर किया जाता है, जबकि स्थिरक्वाथी मिश्रण स्थिर संघटन पर उबलते हैं।

  1. कथन I: ग्लिसरॉल लगभग 290 °C पर उबलता है और अपने क्वथनांक पर अपघटित हो जाता है, अतः इसे साधारण आसवन से प्राप्त नहीं किया जा सकता; इसे (जैसे स्पेंट-लाई से) कम दाब पर आसवन द्वारा पृथक् किया जाता है। असत्य।
  2. कथन II: स्थिरक्वाथी मिश्रण शुद्ध द्रव की भाँति उबलता है — वाष्प और द्रव का संघटन समान रहता है — अतः प्रभाजी आसवन से न संघटन बदलता है, न घटक अलग होते हैं। सत्य।

उत्तर: (D) कथन I असत्य है परन्तु कथन II सत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryPurification of Organic Compounds – distillationJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q214.

Given below are two statements :

Statement (I) : Benzyl chloride reacts faster in SN1 mechanism than ethyl chloride.

Statement (II) : Ethyl carbocation intermediate is less stabilized by hyperconjugation than benzyl carbocation by resonance.

In the light of the above statements, choose the correct answer from the options given below :

नीचे दो कथन दिए गए हैं :

कथन (I) : बेन्ज़िल क्लोराइड, एथिल क्लोराइड की तुलना में SN1 क्रियाविधि में अधिक तीव्रता से अभिक्रिया करता है।

कथन (II) : एथिल कार्बोधनायन मध्यवर्ती, अतिसंयुग्मन (hyperconjugation) द्वारा उतना स्थायी नहीं होता जितना बेन्ज़िल कार्बोधनायन अनुनाद (resonance) द्वारा होता है।

उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: The rate of SN1 depends on the stability of the carbocation formed in the slow ionisation step.

  1. Benzyl chloride ionises to the benzyl cation, C6H5CH2+, whose positive charge is delocalised over the ring by resonance — a highly stabilised cation — so benzyl chloride is much faster in SN1 than ethyl chloride. Statement I is true.
  2. The ethyl cation CH3CH2+ is stabilised only by weak hyperconjugation (3 α-C–H bonds), which is far less effective than the resonance stabilisation of the benzyl cation. Statement II is true — and it is the very reason for Statement I.

Answer: (A) Both Statement I and Statement II are true

अवधारणा: SN1 की दर मंद आयनन चरण में बनने वाले कार्बोधनायन के स्थायित्व पर निर्भर करती है।

  1. बेन्ज़िल क्लोराइड आयनित होकर बेन्ज़िल धनायन C6H5CH2+ देता है, जिसका धनावेश अनुनाद द्वारा वलय पर विस्थानीकृत रहता है — अत्यधिक स्थायी धनायन — अतः SN1 में बेन्ज़िल क्लोराइड, एथिल क्लोराइड से कहीं तीव्र है। कथन I सत्य है।
  2. एथिल धनायन CH3CH2+ केवल दुर्बल अतिसंयुग्मन (3 α-C–H आबंध) से स्थायी होता है, जो बेन्ज़िल धनायन के अनुनाद स्थायीकरण से बहुत कम प्रभावी है। कथन II सत्य है — और यही कथन I का कारण भी है।

उत्तर: (A) कथन I और कथन II दोनों सत्य हैं

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryHaloalkanes – SN1 mechanismJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q215.

In IUPAC nomenclature, the correct order of decreasing priority of functional group is :

IUPAC नामपद्धति में, क्रियात्मक समूहों की घटती प्राथमिकता का सही क्रम है :

  1. A−CONH2, >C=O, −CHO, −NH2, −C≡C−
  2. B−CONH2, −COOCH3, −CHO, −NH2, −OH
  3. C−CONH2, −CHO, >C=O, −NH2, −C≡C−
  4. D−CONH2, −CHO, −CN, −NH2, −C≡C−
Show answer

Concept: IUPAC priority of principal characteristic groups (decreasing): −COOH > sulphonic acid > ester > acid halide > amide > nitrile > aldehyde > ketone > alcohol > amine > alkyne/alkene.

  1. (C): amide (−CONH2) > aldehyde (−CHO) > ketone (>C=O) > amine (−NH2) > alkyne (−C≡C−) — matches the standard order exactly.
  2. (A) is wrong: it places ketone (>C=O) above aldehyde (−CHO).
  3. (B) is wrong: ester (−COOCH3) ranks above amide, and −OH ranks above −NH2.
  4. (D) is wrong: nitrile (−CN) ranks above aldehyde (−CHO), not below.

Answer: (C)

अवधारणा: IUPAC में मुख्य अभिलक्षणिक समूहों की प्राथमिकता (घटते क्रम में): −COOH > सल्फोनिक अम्ल > एस्टर > अम्ल हैलाइड > ऐमाइड > नाइट्राइल > ऐल्डिहाइड > कीटोन > ऐल्कोहॉल > ऐमीन > ऐल्काइन/ऐल्कीन।

  1. (C): ऐमाइड (−CONH2) > ऐल्डिहाइड (−CHO) > कीटोन (>C=O) > ऐमीन (−NH2) > ऐल्काइन (−C≡C−) — मानक क्रम से पूर्णतः मेल खाता है।
  2. (A) गलत है: इसमें कीटोन (>C=O) को ऐल्डिहाइड (−CHO) से ऊपर रखा गया है।
  3. (B) गलत है: एस्टर (−COOCH3) ऐमाइड से ऊपर आता है, तथा −OH, −NH2 से ऊपर आता है।
  4. (D) गलत है: नाइट्राइल (−CN) ऐल्डिहाइड (−CHO) से ऊपर आता है, नीचे नहीं।

उत्तर: (C)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryIUPAC Nomenclature – functional group priorityJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q216.

For the given molecule, "x", the preferred site for the attack of the electrophile is :

दिए गए अणु "x" के लिए, इलेक्ट्रॉनस्नेही (electrophile) के आक्रमण हेतु अधिमान्य स्थान है :

  1. APredominantly at "r"मुख्यतः "r" पर
  2. B"r" and "u""r" तथा "u"
  3. C"p" and "s""p" तथा "s"
  4. DPredominantly at "u"मुख्यतः "u" पर
Show answer

Concept: The molecule is benzanilide, C6H5CONHC6H5. The −NHCOC6H5 group is an activating, ortho/para-director for the ring attached to N, while the ring attached to the C=O group is deactivated.

  1. The nitrogen lone pair is delocalised into the N-attached (anilide) ring, raising electron density at its ortho (s) and para (u) positions; so the electrophile attacks this ring, not the benzoyl ring (r, p).
  2. The bulky −NHCOC6H5 group sterically shields the ortho position (s), so substitution occurs predominantly at the para position, i.e. at "u" (as in the nitration/bromination of acetanilide, which gives mainly the para product).
  3. (A) and (B) are wrong because r lies on the deactivated benzoyl ring; (C) is wrong because p is also on the deactivated ring and s is sterically hindered.

Answer: (D) Predominantly at "u"

अवधारणा: अणु बेन्ज़ैनिलाइड C6H5CONHC6H5 है। −NHCOC6H5 समूह, N से जुड़ी वलय के लिए सक्रियक तथा ऑर्थो/पैरा-निर्देशक है, जबकि C=O से जुड़ी वलय निष्क्रियित होती है।

  1. नाइट्रोजन का एकाकी इलेक्ट्रॉन युग्म N-संलग्न (ऐनिलाइड) वलय में विस्थानीकृत होकर उसकी ऑर्थो (s) तथा पैरा (u) स्थितियों पर इलेक्ट्रॉन घनत्व बढ़ाता है; अतः इलेक्ट्रॉनस्नेही इसी वलय पर आक्रमण करता है, बेन्ज़ॉयल वलय (r, p) पर नहीं।
  2. स्थूल −NHCOC6H5 समूह ऑर्थो स्थिति (s) को त्रिविम रूप से अवरुद्ध करता है, अतः प्रतिस्थापन मुख्यतः पैरा स्थिति अर्थात् "u" पर होता है (जैसे ऐसीटैनिलाइड के नाइट्रीकरण/ब्रोमीनीकरण में मुख्यतः पैरा उत्पाद बनता है)।
  3. (A) तथा (B) गलत हैं क्योंकि r निष्क्रियित बेन्ज़ॉयल वलय पर है; (C) गलत है क्योंकि p भी निष्क्रियित वलय पर है तथा s त्रिविम रूप से बाधित है।

उत्तर: (D) मुख्यतः "u" पर

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAromatic Compounds – electrophilic substitutionJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q217.

Match List - I with List - II.

List - I
Mixture of Compounds
List - II
Reagent used to distinguish
A.Diethyl amine + Ethyl amineI.Bromine water
B.Acetaldehyde + AcetoneII.CHCl3 + KOH, Δ
C.Ethanol + PhenolIII.Neutral FeCl3
D.Benzoic acid + Cinnamic acidIV.Ammonical silver nitrate

Choose the correct answer from the options given below :

सूची-I का सूची-II से मिलान कीजिए।

सूची-I
यौगिकों का मिश्रण
सूची-II
विभेदन हेतु प्रयुक्त अभिकर्मक
A.डाइएथिल ऐमीन + एथिल ऐमीनI.ब्रोमीन जल
B.ऐसीटैल्डिहाइड + ऐसीटोनII.CHCl3 + KOH, Δ
C.एथेनॉल + फ़ीनॉलIII.उदासीन FeCl3
D.बेन्ज़ोइक अम्ल + सिनैमिक अम्लIV.अमोनियामय सिल्वर नाइट्रेट

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. AA-IV, B-II, C-I, D-III
  2. BA-IV, B-II, C-III, D-I
  3. CA-II, B-IV, C-I, D-III
  4. DA-II, B-IV, C-III, D-I
Show answer

Concept: Pick the reagent that reacts with only one member of each pair.

  1. A-II: carbylamine test (CHCl3 + KOH, Δ) — only the primary amine (ethyl amine) gives a foul-smelling isocyanide; diethyl amine (2°) does not.
  2. B-IV: ammoniacal silver nitrate (Tollens' reagent) — only the aldehyde (acetaldehyde) gives the silver mirror; acetone does not.
  3. C-III: neutral FeCl3 — phenol gives a violet colouration; ethanol does not.
  4. D-I: bromine water — cinnamic acid (C6H5CH=CHCOOH) decolourises it by addition across its C=C bond; benzoic acid does not.

Answer: (D) A-II, B-IV, C-III, D-I

अवधारणा: वही अभिकर्मक चुनिए जो प्रत्येक युग्म के केवल एक सदस्य से अभिक्रिया करे।

  1. A-II: कार्बिलऐमीन परीक्षण (CHCl3 + KOH, Δ) — केवल प्राथमिक ऐमीन (एथिल ऐमीन) दुर्गंधयुक्त आइसोसायनाइड देती है; डाइएथिल ऐमीन (2°) नहीं।
  2. B-IV: अमोनियामय सिल्वर नाइट्रेट (टॉलेन अभिकर्मक) — केवल ऐल्डिहाइड (ऐसीटैल्डिहाइड) रजत दर्पण देता है; ऐसीटोन नहीं।
  3. C-III: उदासीन FeCl3 — फ़ीनॉल बैंगनी रंग देता है; एथेनॉल नहीं।
  4. D-I: ब्रोमीन जल — सिनैमिक अम्ल (C6H5CH=CHCOOH) अपने C=C आबंध पर योगज अभिक्रिया द्वारा इसका रंग उड़ा देता है; बेन्ज़ोइक अम्ल नहीं।

उत्तर: (D) A-II, B-IV, C-III, D-I

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryOrganic Chemistry – distinguishing testsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q218.

Consider the three aromatic molecules (P, Q and R) whose structures have been given below :

The correct order regarding the reactivity of these compounds with Ph–N+≡N Cl− under optimum but slightly acidic medium is :

नीचे दी गई संरचनाओं वाले तीन ऐरोमैटिक अणुओं (P, Q तथा R) पर विचार कीजिए :

अनुकूलतम परन्तु हल्के अम्लीय माध्यम में इन यौगिकों की Ph–N+≡N Cl− के साथ अभिक्रियाशीलता के संबंध में सही क्रम है :

  1. AP > Q > R
  2. BR > P > Q
  3. CR > Q > P
  4. DP > R > Q
Show answer

Concept: Azo coupling of benzenediazonium chloride is an electrophilic aromatic substitution at the para position of N,N-dimethylaniline; it needs the −NMe2 lone pair to stay conjugated with the ring. ortho-Methyl groups twist −NMe2 out of the ring plane (steric inhibition of resonance), cutting the ring's activation.

  1. P (no ortho methyl): −NMe2 fully planar with the ring → ring maximally activated → fastest coupling.
  2. Q (one ortho methyl): −NMe2 partially twisted → weaker conjugation → slower.
  3. R (two ortho methyls): −NMe2 almost perpendicular to the ring → lone pair hardly delocalises → slowest.
  4. Hence reactivity P > Q > R.

Answer: (A) P > Q > R

अवधारणा: बेन्ज़ीनडाइऐज़ोनियम क्लोराइड का ऐज़ो युग्मन, N,N-डाइमेथिलऐनिलीन की पैरा स्थिति पर इलेक्ट्रॉनस्नेही ऐरोमैटिक प्रतिस्थापन है; इसके लिए −NMe2 का एकाकी युग्म वलय से संयुग्मित रहना आवश्यक है। ऑर्थो-मेथिल समूह −NMe2 को वलय-तल से बाहर घुमा देते हैं (अनुनाद का त्रिविम निरोध), जिससे वलय का सक्रियण घट जाता है।

  1. P (कोई ऑर्थो मेथिल नहीं): −NMe2 वलय के साथ पूर्णतः समतलीय → वलय अधिकतम सक्रियित → सबसे तीव्र युग्मन।
  2. Q (एक ऑर्थो मेथिल): −NMe2 आंशिक रूप से घूमा हुआ → दुर्बल संयुग्मन → धीमा।
  3. R (दो ऑर्थो मेथिल): −NMe2 वलय के लगभग लंबवत → एकाकी युग्म का विस्थानीकरण नगण्य → सबसे धीमा।
  4. अतः अभिक्रियाशीलता P > Q > R।

उत्तर: (A) P > Q > R

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryDiazonium Salts – azo couplingJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q219.

Match List - I with List - II.

List - I
Vitamin
List - II
Name
A.Vitamin B1I.Pyridoxine
B.Vitamin B2II.Ascorbic acid
C.Vitamin B6III.Thiamine
D.Vitamin CIV.Riboflavin

Choose the correct answer from the options given below :

सूची-I का सूची-II से मिलान कीजिए।

सूची-I
विटामिन
सूची-II
नाम
A.विटामिन B1I.पिरिडॉक्सिन (Pyridoxine)
B.विटामिन B2II.एस्कॉर्बिक अम्ल
C.विटामिन B6III.थायमीन (Thiamine)
D.विटामिन CIV.राइबोफ्लेविन (Riboflavin)

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. AA-II, B-I, C-III, D-IV
  2. BA-IV, B-III, C-II, D-I
  3. CA-III, B-IV, C-I, D-II
  4. DA-I, B-III, C-II, D-IV
Show answer

Concept: Chemical names of common vitamins (NCERT Biomolecules).

  1. Vitamin B1 = Thiamine → A-III.
  2. Vitamin B2 = Riboflavin → B-IV.
  3. Vitamin B6 = Pyridoxine → C-I.
  4. Vitamin C = Ascorbic acid → D-II.

Short trick: B1-Thiamine, B2-Riboflavin, B6-Pyridoxine, B12-Cyanocobalamin, C-Ascorbic acid.

Answer: (C) A-III, B-IV, C-I, D-II

अवधारणा: सामान्य विटामिनों के रासायनिक नाम (NCERT जैव-अणु)।

  1. विटामिन B1 = थायमीन → A-III।
  2. विटामिन B2 = राइबोफ्लेविन → B-IV।
  3. विटामिन B6 = पिरिडॉक्सिन → C-I।
  4. विटामिन C = एस्कॉर्बिक अम्ल → D-II।

शॉर्ट ट्रिक: B1-थायमीन, B2-राइबोफ्लेविन, B6-पिरिडॉक्सिन, B12-सायनोकोबालैमिन, C-एस्कॉर्बिक अम्ल।

उत्तर: (C) A-III, B-IV, C-I, D-II

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryBiomolecules – vitaminsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q220.

A salt with few drops of conc. HCl gives apple green colour in flame test. The group precipitate of the salt is dissolved in acetic acid and treated with K2CrO4 to give yellow precipitate. When the sodium carbonate extract of the salt solution is heated with conc. HNO3 and ammonium molybdate, it resulted a canary yellow precipitate. The cation and anion present in the salt are respectively,

एक लवण सान्द्र HCl की कुछ बूँदों के साथ ज्वाला परीक्षण में सेब जैसा हरा (apple green) रंग देता है। लवण के समूह अवक्षेप को ऐसीटिक अम्ल में घोलकर K2CrO4 से उपचारित करने पर पीला अवक्षेप प्राप्त होता है। जब लवण विलयन के सोडियम कार्बोनेट निष्कर्ष को सान्द्र HNO3 तथा अमोनियम मॉलिब्डेट के साथ गर्म किया जाता है, तो कैनरी पीला अवक्षेप प्राप्त होता है। लवण में उपस्थित धनायन तथा ऋणायन क्रमशः हैं,

  1. ACa2+ and SO42−Ca2+ तथा SO42−
  2. BBa2+ and PO43−Ba2+ तथा PO43−
  3. CMn2+ and PO43−Mn2+ तथा PO43−
  4. DBa2+ and SO42−Ba2+ तथा SO42−
Show answer

Concept: Flame colours and confirmatory tests of salt analysis.

  1. Apple-green flame with conc. HCl → Ba2+ (Ca2+ gives brick red, Sr2+ crimson; Mn2+ gives no such flame).
  2. Group (V) precipitate dissolved in acetic acid + K2CrO4 → yellow BaCrO4 precipitate — confirms Ba2+.
  3. Sodium carbonate extract + conc. HNO3 + ammonium molybdate, heated → canary-yellow precipitate of ammonium phosphomolybdate, (NH4)3PO4·12MoO3 — confirms PO43−.
  4. So the salt contains Ba2+ and PO43−; options with Ca2+, Mn2+ or SO42− contradict these observations.

Answer: (B) Ba2+ and PO43−

अवधारणा: लवण विश्लेषण के ज्वाला रंग तथा पुष्टिकारक परीक्षण।

  1. सान्द्र HCl के साथ सेब जैसी हरी ज्वाला → Ba2+ (Ca2+ ईंट जैसा लाल, Sr2+ गहरा लाल देता है; Mn2+ ऐसी ज्वाला नहीं देता)।
  2. समूह (V) अवक्षेप को ऐसीटिक अम्ल में घोलकर K2CrO4 मिलाने पर → पीला BaCrO4 अवक्षेप — Ba2+ की पुष्टि।
  3. सोडियम कार्बोनेट निष्कर्ष + सान्द्र HNO3 + अमोनियम मॉलिब्डेट, गर्म करने पर → अमोनियम फॉस्फोमॉलिब्डेट (NH4)3PO4·12MoO3 का कैनरी पीला अवक्षेप — PO43− की पुष्टि।
  4. अतः लवण में Ba2+ तथा PO43− हैं; Ca2+, Mn2+ अथवा SO42− वाले विकल्प इन प्रेक्षणों के विरुद्ध हैं।

उत्तर: (B) Ba2+ तथा PO43−

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryQualitative Analysis – cation and anion testsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1