JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

225 questions in Physics.

Q221.
In single slit diffraction pattern, the wavelength of light used is 628 nm and slit width is 0.2 mm, the angular width of central maximum is α×10−2 degrees. The value of α is ________.
एकल झिरी विवर्तन प्रतिरूप (single slit diffraction pattern) में प्रयुक्त प्रकाश की तरंगदैर्ध्य 628 nm तथा झिरी की चौड़ाई 0.2 mm है। केन्द्रीय उच्चिष्ठ (central maximum) की कोणीय चौड़ाई α×10−2 डिग्री है। α का मान ________ है।
Show answer

Concept: The central maximum extends between the first minima on either side (asin⁡θ=±λ), so its angular width is 2θ=2λa.

  1. 2θ=2×628×10−90.2×10−3=6.28×10−3 rad.
  2. In degrees: 6.28×10−3×180π=6.28×10−3×57.3≈0.36∘.
  3. 0.36∘=36×10−2 degrees ⇒α=36.

Short trick: 628=200π, so 2λa=2π×10−3 rad =2π×10−3×180π=0.36∘ exactly.

Answer: 36

अवधारणा: केन्द्रीय उच्चिष्ठ दोनों ओर के प्रथम निम्निष्ठों (asin⁡θ=±λ) के बीच फैला होता है, अतः इसकी कोणीय चौड़ाई 2θ=2λa है।

  1. 2θ=2×628×10−90.2×10−3=6.28×10−3 rad।
  2. डिग्री में: 6.28×10−3×180π=6.28×10−3×57.3≈0.36∘।
  3. 0.36∘=36×10−2 डिग्री ⇒α=36।

शॉर्ट ट्रिक: 628=200π, अतः 2λa=2π×10−3 rad =2π×10−3×180π=0.36∘ (यथार्थ)।

उत्तर: 36

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWave optics – single slit diffractionJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q222.
A vessel contains 0.15 m3 of a gas at pressure 8 bar and temperature 140 °C with cp=3R and cv=2R. It is expanded adiabatically till pressure falls to 1 bar. The work done during this process is ________ kJ.     (R is gas constant)
एक पात्र में 8 bar दाब तथा 140 °C ताप पर 0.15 m3 गैस है, जिसके लिए cp=3R तथा cv=2R है। इसे रुद्धोष्म (adiabatic) रूप से तब तक प्रसारित किया जाता है जब तक दाब घटकर 1 bar न हो जाए। इस प्रक्रम में किया गया कार्य ________ kJ है।     (R गैस नियतांक है)
Show answer

Concept: For an adiabatic process PVγ = constant and W=P1V1−P2V2γ−1, with γ=cpcv.

  1. γ=3R2R=1.5.
  2. V2=V1(P1P2)1/γ=0.15×82/3=0.15×4=0.6 m3.
  3. P1V1=8×105×0.15=1.2×105 J; P2V2=1×105×0.6=0.6×105 J.
  4. W=(1.2−0.6)×1051.5−1=1.2×105 J =120 kJ. (The temperature 140 °C is not needed.)

Short trick: 82/3=4, so P2V2=48P1V1=12P1V1; then W=P1V1/21/2=P1V1=120 kJ.

Answer: 120

अवधारणा: रुद्धोष्म प्रक्रम में PVγ = नियत तथा W=P1V1−P2V2γ−1, जहाँ γ=cpcv।

  1. γ=3R2R=1.5।
  2. V2=V1(P1P2)1/γ=0.15×82/3=0.15×4=0.6 m3।
  3. P1V1=8×105×0.15=1.2×105 J; P2V2=1×105×0.6=0.6×105 J।
  4. W=(1.2−0.6)×1051.5−1=1.2×105 J =120 kJ। (ताप 140 °C की आवश्यकता नहीं है।)

शॉर्ट ट्रिक: 82/3=4, अतः P2V2=48P1V1=12P1V1; तब W=P1V1/21/2=P1V1=120 kJ।

उत्तर: 120

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – adiabatic workJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q223.
1 μC charge moving with velocity v→=(i^−2j^+3k^) m/s in the region of magnetic field B→=(2i^+3j^−5k^) T. The magnitude of force acting on it is α×10−6 N. The value of α is ________.
1 μC आवेश B→=(2i^+3j^−5k^) T के चुम्बकीय क्षेत्र वाले क्षेत्र में वेग v→=(i^−2j^+3k^) m/s से गतिमान है। इस पर कार्यरत बल का परिमाण α×10−6 N है। α का मान ________ है।
Show answer

Concept: Magnetic force F→=q(v→×B→).

  1. v→×B→=|i^j^k^1−2323−5|.
  2. i^[(−2)(−5)−(3)(3)]−j^[(1)(−5)−(3)(2)]+k^[(1)(3)−(−2)(2)]=i^+11j^+7k^.
  3. |v→×B→|=1+121+49=171.
  4. F=10−6×171 N ⇒α=171.

Short trick: |v→×B→|2=v2B2−(v→⋅B→)2=14×38−(2−6−15)2=532−361=171.

Answer: 171

अवधारणा: चुम्बकीय बल F→=q(v→×B→)।

  1. v→×B→=|i^j^k^1−2323−5|।
  2. i^[(−2)(−5)−(3)(3)]−j^[(1)(−5)−(3)(2)]+k^[(1)(3)−(−2)(2)]=i^+11j^+7k^।
  3. |v→×B→|=1+121+49=171।
  4. F=10−6×171 N ⇒α=171।

शॉर्ट ट्रिक: |v→×B→|2=v2B2−(v→⋅B→)2=14×38−(2−6−15)2=532−361=171।

उत्तर: 171

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMoving charges – magnetic Lorentz forceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q224.
A uniform wire of length l of weight w is suspended from the roof with a weight of W at the other end. The stress in the wire at l3 distance from the top is (WA+2γwA), where, A is the cross sectional area of the wire. The value of γ is ________.
लम्बाई l तथा भार w का एक एकसमान तार छत से लटकाया गया है और इसके दूसरे सिरे पर W भार लगा है। ऊपर से l3 दूरी पर तार में प्रतिबल (stress) (WA+2γwA) है, जहाँ A तार का अनुप्रस्थ काट क्षेत्रफल है। γ का मान ________ है।
Show answer

Concept: The tension at a section of a hanging wire supports everything below that section: the attached load plus the weight of the wire below it.

  1. Length of wire below the point at l3 from the top =l−l3=2l3, whose weight is 23w.
  2. Tension there: T=W+23w.
  3. Stress =TA=WA+23wA.
  4. Comparing with WA+2γwA: γ=3.

Short trick: Only the part of the wire below the section counts — here two-thirds of it.

Answer: 3

अवधारणा: लटके तार के किसी अनुप्रस्थ काट पर तनाव उसके नीचे की हर चीज़ को सँभालता है: लगा हुआ भार तथा उस काट के नीचे के तार का भार।

  1. ऊपर से l3 दूरी वाले बिन्दु के नीचे तार की लम्बाई =l−l3=2l3, जिसका भार 23w है।
  2. वहाँ तनाव: T=W+23w।
  3. प्रतिबल =TA=WA+23wA।
  4. WA+2γwA से तुलना करने पर: γ=3।

शॉर्ट ट्रिक: केवल उस काट के नीचे वाला तार का भाग गिना जाता है — यहाँ उसका दो-तिहाई भाग।

उत्तर: 3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMechanical properties of solids – stress in hanging wireJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1
Q225.
A tub is filled with water and a wooden cube 10 cm × 10 cm × 10 cm is placed in the water. The wooden cube is found to float on the water with a part of it submerged in water. When a metal coin is placed on the wooden cube, the submerged part is increased by 3.87 cm. The mass of the metal coin is ________ gram.
(Take water density as 1 g/cm3 and density of wood as 0.4 g/cm3)
एक टब पानी से भरा है और उसमें 10 cm × 10 cm × 10 cm का एक लकड़ी का घन रखा जाता है। लकड़ी का घन पानी पर इस प्रकार तैरता पाया जाता है कि उसका एक भाग पानी में डूबा रहता है। जब लकड़ी के घन पर एक धातु का सिक्का रखा जाता है, तो डूबा हुआ भाग 3.87 cm बढ़ जाता है। धातु के सिक्के का द्रव्यमान ________ ग्राम है।
(पानी का घनत्व 1 g/cm3 तथा लकड़ी का घनत्व 0.4 g/cm3 लीजिए)
Show answer

Concept: For a floating body, the extra weight added equals the weight of the extra water displaced.

  1. Initially submerged depth: h=ρwoodρwater×10=4 cm, so the cube can sink 6 cm more — an extra 3.87 cm keeps it floating.
  2. Extra volume displaced =10×10×3.87=387 cm3.
  3. Mass of coin =ρwater×ΔV=1×387=387 g.

Short trick: Extra mass = (base area) × (extra depth) × ρwater = 100×3.87 g; the wood density is needed only to check that the cube still floats.

Answer: 387

अवधारणा: तैरती वस्तु पर जोड़ा गया अतिरिक्त भार, अतिरिक्त विस्थापित जल के भार के बराबर होता है।

  1. प्रारम्भ में डूबी गहराई: h=ρwoodρwater×10=4 cm, अतः घन अभी 6 cm और डूब सकता है — अतिरिक्त 3.87 cm पर भी वह तैरता रहता है।
  2. अतिरिक्त विस्थापित आयतन =10×10×3.87=387 cm3।
  3. सिक्के का द्रव्यमान =ρwater×ΔV=1×387=387 g।

शॉर्ट ट्रिक: अतिरिक्त द्रव्यमान = (आधार क्षेत्रफल) × (अतिरिक्त गहराई) × ρwater = 100×3.87 g; लकड़ी का घनत्व केवल यह जाँचने के लिए है कि घन अब भी तैरता है।

उत्तर: 387

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsFluid mechanics – buoyancy & flotationJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 2 Apr Shift 1