JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

225 questions in Physics.

Q61.
In interference experiment the path difference between two interfering waves at a point A on the screen is λ/3, where λ is the wavelength of these waves, and at another point B the path difference is λ/6. The ratio of intensities at points A and B is_______.
व्यतिकरण प्रयोग में पर्दे के एक बिन्दु A पर दो व्यतिकारी तरंगों के बीच पथान्तर λ/3 है, जहाँ λ इन तरंगों की तरंगदैर्ध्य है, तथा एक अन्य बिन्दु B पर पथान्तर λ/6 है। बिन्दुओं A तथा B पर तीव्रताओं का अनुपात _______ है।
  1. A3
  2. B4
  3. C1/3
  4. D1/4
Show answer

Concept: For equal waves I=Imaxcos2⁡ϕ2 with ϕ=2πλΔx.

  1. At A: ϕ=2π3, IA=Imaxcos2⁡60∘=Imax4.
  2. At B: ϕ=π3, IB=Imaxcos2⁡30∘=3Imax4.
  3. IAIB=13.

Short trick: cos2⁡60∘:cos2⁡30∘=14:34=1:3.

Answer: (C) 1/3

अवधारणा: समान तरंगों के लिए I=Imaxcos2⁡ϕ2, जहाँ ϕ=2πλΔx।

  1. A पर: ϕ=2π3, IA=Imaxcos2⁡60∘=Imax4।
  2. B पर: ϕ=π3, IB=Imaxcos2⁡30∘=3Imax4।
  3. IAIB=13।

शॉर्ट ट्रिक: cos2⁡60∘:cos2⁡30∘=14:34=1:3।

उत्तर: (C) 1/3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – interference intensityJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q62.
A particle is executing simple harmonic motion. Its amplitude is A and time period is 5 sec. The time required by it to move from x=A to x=A2 is ________ sec.
एक कण सरल आवर्त गति कर रहा है। इसका आयाम A तथा आवर्तकाल 5 sec है। इसके द्वारा x=A से x=A2 तक जाने में लगा समय ________ sec है।
  1. A1/4
  2. B5/4
  3. C5/8
  4. D3/8
Show answer

Concept: Starting from the extreme, x=Acos⁡ωt.

  1. A2=Acos⁡ωt⇒ωt=π4.
  2. t=π/42π/T=T8=58 s.

Short trick: Extreme to A/2 is a 45∘ phase change, i.e. T/8.

Answer: (C) 5/8

अवधारणा: चरम स्थिति से प्रारम्भ करने पर x=Acos⁡ωt।

  1. A2=Acos⁡ωt⇒ωt=π4।
  2. t=π/42π/T=T8=58 s।

शॉर्ट ट्रिक: चरम स्थिति से A/2 तक कला परिवर्तन 45∘ है, अर्थात् T/8।

उत्तर: (C) 5/8

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsOscillations – SHM time intervalJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q63.
A thin half ring of radius 35 cm is uniformly charged with a total charge of Q coulomb. If the magnitude of the electric field at centre of the half ring is 100 V/m, then the value of Q is __________ nC.
(ϵ0=8.85×10−12 C2/Nm2 and π=3.14)
35 cm त्रिज्या की एक पतली अर्धवलय पर कुल आवेश Q कूलॉम एकसमान रूप से वितरित है। यदि अर्धवलय के केन्द्र पर विद्युत क्षेत्र का परिमाण 100 V/m है, तो Q का मान __________ nC है।
(ϵ0=8.85×10−12 C2/Nm2 तथा π=3.14)
  1. A2.14
  2. B2.44
  3. C3.25
  4. D0.7
Show answer

Concept: Field at the centre of a uniformly charged semicircle: E=2kλR with λ=QπR, i.e. E=Q2π2ϵ0R2.

  1. Q=2π2ϵ0R2E.
  2. Q=2×(3.14)2×8.85×10−12×(0.35)2×100.
  3. Q=2×9.8596×8.85×10−12×0.1225×100=2.14×10−9 C =2.14 nC.

Short trick: 2π2≈19.72; 19.72×0.1225≈2.42; ×8.85×10−10≈2.14×10−9.

Answer: (A) 2.14

अवधारणा: एकसमान आवेशित अर्धवृत्त के केन्द्र पर क्षेत्र: E=2kλR, जहाँ λ=QπR, अर्थात् E=Q2π2ϵ0R2।

  1. Q=2π2ϵ0R2E।
  2. Q=2×(3.14)2×8.85×10−12×(0.35)2×100।
  3. Q=2×9.8596×8.85×10−12×0.1225×100=2.14×10−9 C =2.14 nC।

शॉर्ट ट्रिक: 2π2≈19.72; 19.72×0.1225≈2.42; ×8.85×10−10≈2.14×10−9।

उत्तर: (A) 2.14

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – field of a charged half ringJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q64.
The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance RS is 0.5 mA.
The minimum value of the resistance of RS, to ensure that the LED is not damaged is __________kΩ.
LED की अधिकतम निर्धारित शक्ति 2 mW है तथा इसे नीचे चित्र में दर्शाए अनुसार 5 V निवेशी वोल्टता वाले परिपथ में प्रयुक्त किया गया है। प्रतिरोध RS से प्रवाहित धारा 0.5 mA है।
LED क्षतिग्रस्त न हो, यह सुनिश्चित करने के लिए RS के प्रतिरोध का न्यूनतम मान __________kΩ है।
  1. A6
  2. B2
  3. C4
  4. D5
Show answer

Concept: The diode in the middle branch points upward (cathode towards the positive top wire), so it is reverse biased and its branch carries no current. All of the 0.5 mA through RS flows through the forward-biased LED.

  1. Maximum LED voltage: VLED=PI=2 mW0.5 mA=4 V.
  2. Drop across RS: 5−4=1 V.
  3. RS=1 V0.5 mA=2 kΩ. A smaller RS would push more power into the LED.

Short trick: RS=V−P/II=5−40.5×10−3=2 kΩ.

Answer: (B) 2

अवधारणा: बीच की शाखा का डायोड ऊपर की ओर इंगित है (कैथोड धनात्मक ऊपरी तार की ओर), अतः यह पश्च बायसित है और इस शाखा में धारा नहीं बहती। RS की पूरी 0.5 mA धारा अग्र बायसित LED से बहती है।

  1. LED पर अधिकतम वोल्टता: VLED=PI=2 mW0.5 mA=4 V।
  2. RS पर विभवपात: 5−4=1 V।
  3. RS=1 V0.5 mA=2 kΩ। इससे कम RS होने पर LED में अधिक शक्ति जाएगी।

शॉर्ट ट्रिक: RS=V−P/II=5−40.5×10−3=2 kΩ।

उत्तर: (B) 2

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsSemiconductor Electronics – LED & diode circuitJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q65.
A point light source emits E.M. waves in free space. A detector, placed at a distance of L m, measures the intensity as I0. The detector is now shifted to another location on the same spherical surface ensuring the angle between original location and new location as 45∘. The measured intensity at new location will be _______.
एक बिन्दु प्रकाश स्रोत मुक्त आकाश में वि.चु. (E.M.) तरंगें उत्सर्जित करता है। L m की दूरी पर रखा एक संसूचक तीव्रता I0 मापता है। अब संसूचक को उसी गोलीय पृष्ठ पर किसी अन्य स्थान पर इस प्रकार खिसकाया जाता है कि मूल स्थान और नए स्थान के बीच कोण 45∘ हो। नए स्थान पर मापी गई तीव्रता _______ होगी।
  1. AI04
  2. BI0
  3. CI02
  4. DI02
Show answer

Concept: An isotropic point source spreads power uniformly over spheres: I=P4πr2 depends only on r, not on direction.

  1. The new location lies on the same sphere, so r=L is unchanged.
  2. Hence I=P4πL2=I0; the 45∘ angle is irrelevant.

Short trick: Same distance from a point source ⇒ same intensity. (A), (C), (D) wrongly bring in the angle.

Answer: (B) I0

अवधारणा: समदैशिक बिन्दु स्रोत की शक्ति गोलों पर एकसमान फैलती है: I=P4πr2 केवल r पर निर्भर है, दिशा पर नहीं।

  1. नया स्थान उसी गोले पर है, अतः r=L अपरिवर्तित है।
  2. अतः I=P4πL2=I0; 45∘ कोण का कोई प्रभाव नहीं।

शॉर्ट ट्रिक: बिन्दु स्रोत से समान दूरी ⇒ समान तीव्रता। (A), (C), (D) गलत ढंग से कोण को सम्मिलित करते हैं।

उत्तर: (B) I0

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Waves – intensity of a point sourceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q66.
A spherical interface lens of radius R separates two media of refractive indices 1 and 1.4 respectively as shown in the figure below. A point source is placed at a distance of 4R in front of spherical interface. The magnitude of the magnification of point source image is ________.
त्रिज्या R का एक गोलीय अन्तरापृष्ठ (लेंस) क्रमशः 1 तथा 1.4 अपवर्तनांक वाले दो माध्यमों को पृथक करता है, जैसा कि नीचे चित्र में दर्शाया गया है। एक बिन्दु स्रोत गोलीय अन्तरापृष्ठ के सामने 4R दूरी पर रखा है। बिन्दु स्रोत के प्रतिबिम्ब के आवर्धन का परिमाण ________ है।
  1. A1.66
  2. B2.33
  3. C2.66
  4. D1.33
Show answer

Concept: n2v−n1u=n2−n1R and m=n1vn2u. The surface is convex towards the source (centre in the 1.4 medium), so R=+R, u=−4R.

  1. 1.4v+14R=0.4R⇒1.4v=0.15R.
  2. v=1.4R0.15=28R3≈9.33R (real image).
  3. m=1×28R/31.4×(−4R)=−53, so |m|=1.66.

Short trick: |m|=n1vn2|u|=9.335.6=1.67.

Answer: (A) 1.66

अवधारणा: n2v−n1u=n2−n1R तथा m=n1vn2u। पृष्ठ स्रोत की ओर उत्तल है (केन्द्र 1.4 माध्यम में), अतः R=+R, u=−4R।

  1. 1.4v+14R=0.4R⇒1.4v=0.15R।
  2. v=1.4R0.15=28R3≈9.33R (वास्तविक प्रतिबिम्ब)।
  3. m=1×28R/31.4×(−4R)=−53, अतः |m|=1.66।

शॉर्ट ट्रिक: |m|=n1vn2|u|=9.335.6=1.67।

उत्तर: (A) 1.66

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – refraction at spherical surfaceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q67.
A small cube of side 1 mm is placed at the centre of a circular loop of radius 10 cm carrying a current of 2 A. The magnetic energy stored inside the cube is α×10−14 J. The value of α is _______.
(μ0=4π×10−7 Tm/A, π=3.14)
1 mm भुजा का एक छोटा घन 2 A धारावाही 10 cm त्रिज्या के वृत्ताकार लूप के केन्द्र पर रखा है। घन के अन्दर संचित चुम्बकीय ऊर्जा α×10−14 J है। α का मान _______ है।
(μ0=4π×10−7 Tm/A, π=3.14)
  1. A6.28
  2. B6.28×10−6
  3. C628
  4. D6.28×10−4
Show answer

Concept: Field at the centre of a loop B=μ0I2r; energy density u=B22μ0; energy =u× volume (field nearly uniform over the tiny cube).

  1. B=4π×10−7×22×0.1=4π×10−6 T.
  2. u=(4π×10−6)22×4π×10−7=2π×10−5=6.28×10−5 J/m3.
  3. U=6.28×10−5×(10−3)3=6.28×10−14 J ⇒α=6.28.

Short trick: u=μ0I28r2=4π×10−7×48×0.01=2π×10−5.

Answer: (A) 6.28

अवधारणा: लूप के केन्द्र पर क्षेत्र B=μ0I2r; ऊर्जा घनत्व u=B22μ0; ऊर्जा =u× आयतन (छोटे घन में क्षेत्र लगभग एकसमान)।

  1. B=4π×10−7×22×0.1=4π×10−6 T।
  2. u=(4π×10−6)22×4π×10−7=2π×10−5=6.28×10−5 J/m3।
  3. U=6.28×10−5×(10−3)3=6.28×10−14 J ⇒α=6.28।

शॉर्ट ट्रिक: u=μ0I28r2=4π×10−7×48×0.01=2π×10−5।

उत्तर: (A) 6.28

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMagnetism – magnetic energy densityJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q68.
An inductor of inductance 10 mH having resistance of 100 Ω is connected to battery of E.M.F. 1.0 V through a switch as shown in the figure below. After switch is closed, the ratio of instantaneous voltages across the inductor when the current passing through it is 2 mA and 4 mA is _________.
100 Ω प्रतिरोध वाला 10 mH प्रेरकत्व का एक प्रेरक, नीचे चित्र में दर्शाए अनुसार, एक स्विच के माध्यम से 1.0 V वि.वा.बल (E.M.F.) की बैटरी से जुड़ा है। स्विच बंद करने के पश्चात्, जब प्रेरक से प्रवाहित धारा 2 mA तथा 4 mA हो, तब प्रेरक के सिरों पर तात्क्षणिक वोल्टताओं का अनुपात _________ है।
  1. A4/3
  2. B3/4
  3. C5/3
  4. D3/5
Show answer

Concept: Kirchhoff's loop law: E=iR+Ldidt, so the induced voltage across the inductance is VL=E−iR.

  1. At i=2 mA: VL=1−2×10−3×100=0.8 V.
  2. At i=4 mA: VL=1−4×10−3×100=0.6 V.
  3. Ratio =0.80.6=43.

Short trick: E−i1RE−i2R=1−0.21−0.4=43; (B) is the inverse.

Answer: (A) 4/3

अवधारणा: किरचॉफ का पाश नियम: E=iR+Ldidt, अतः प्रेरकत्व के सिरों पर प्रेरित वोल्टता VL=E−iR।

  1. i=2 mA पर: VL=1−2×10−3×100=0.8 V।
  2. i=4 mA पर: VL=1−4×10−3×100=0.6 V।
  3. अनुपात =0.80.6=43।

शॉर्ट ट्रिक: E−i1RE−i2R=1−0.21−0.4=43; (B) इसका व्युत्क्रम है।

उत्तर: (A) 4/3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – LR circuit growthJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q69.
The ratio of momentum of the photons of the 1st and 2nd line of Balmer series of Hydrogen atoms is α/β. The possible values of α and β are:-
हाइड्रोजन परमाणुओं की बामर श्रेणी की 1ली तथा 2री रेखा के फोटॉनों के संवेगों का अनुपात α/β है। α तथा β के सम्भावित मान हैं:-
  1. A27 and 2027 तथा 20
  2. B3 and 163 तथा 16
  3. C5 and 365 तथा 36
  4. D20 and 2720 तथा 27
Show answer

Concept: p=hλ and 1λ=RH(122−1n2), so p∝(14−1n2).

  1. 1st line (3→2): 14−19=536.
  2. 2nd line (4→2): 14−116=316.
  3. p1p2=5/363/16=80108=2027, so α=20, β=27.

Short trick: The first line has the least energy, so the ratio must be less than 1 — (A) is inverted; (B) and (C) are the individual factors, not the ratio.

Answer: (D) 20 and 27

अवधारणा: p=hλ तथा 1λ=RH(122−1n2), अतः p∝(14−1n2)।

  1. पहली रेखा (3→2): 14−19=536।
  2. दूसरी रेखा (4→2): 14−116=316।
  3. p1p2=5/363/16=80108=2027, अतः α=20, β=27।

शॉर्ट ट्रिक: पहली रेखा की ऊर्जा सबसे कम है, अतः अनुपात 1 से कम होना चाहिए — (A) उल्टा है; (B) व (C) अलग-अलग गुणक हैं, अनुपात नहीं।

उत्तर: (D) 20 तथा 27

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsAtoms – Balmer series photon momentumJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q70.
A LCR series circuit driven with Erms=90 V at frequency fd=30 Hz has resistance R=80 Ω, an inductance with inductive reactance XL=20.0 Ω and capacitance with capacitive reactance XC=80.0 Ω. The power factor of the circuit is______.
Erms=90 V तथा आवृत्ति fd=30 Hz से चालित एक श्रेणी LCR परिपथ में प्रतिरोध R=80 Ω, प्रेरकीय प्रतिघात XL=20.0 Ω वाला एक प्रेरकत्व तथा धारितीय प्रतिघात XC=80.0 Ω वाली एक धारिता है। परिपथ का शक्ति गुणांक ______ है।
  1. A0.8
  2. B0.64
  3. C0.9
  4. D0.5
Show answer

Concept: cos⁡ϕ=RZ with Z=R2+(XC−XL)2.

  1. XC−XL=80−20=60 Ω.
  2. Z=802+602=100 Ω.
  3. cos⁡ϕ=80100=0.8.

Short trick: 60-80-100 is a 3-4-5 triangle: cos⁡ϕ=4/5. Erms and fd are not needed.

Answer: (A) 0.8

अवधारणा: cos⁡ϕ=RZ, जहाँ Z=R2+(XC−XL)2।

  1. XC−XL=80−20=60 Ω।
  2. Z=802+602=100 Ω।
  3. cos⁡ϕ=80100=0.8।

शॉर्ट ट्रिक: 60-80-100 एक 3-4-5 त्रिभुज है: cos⁡ϕ=4/5। Erms तथा fd की आवश्यकता नहीं है।

उत्तर: (A) 0.8

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsAlternating Current – power factorJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q71.
Refer to the circuit diagram given below. The heat generated across the 6 Ω resistance in 100 second is α100 J. The value of α is ________. (Nearest integer)
नीचे दिए गए परिपथ आरेख को देखिए। 100 सेकण्ड में 6 Ω प्रतिरोध में उत्पन्न ऊष्मा α100 J है। α का मान ________ है। (निकटतम पूर्णांक)
Show answer

Concept: Node analysis. Call the right-hand junction Y (VY=0), the left corner L and the junction between 3 Ω and 4 Ω X. The longer plate of each cell is its positive terminal: the 2 V cell gives VL=+2 V; in the top branch the 3 V cell has its positive plate towards X.

  1. Current from X to Y through the top branch: i6=VX−3−06.
  2. KCL at X: 2−VX3=VX4+VX−36. Multiply by 12: 8−4VX=3VX+2VX−6⇒VX=149 V.
  3. i6=14/9−36=−1354 A, i.e. 1354 A flowing from Y to X.
  4. Heat H=i2Rt=(1354)2×6×100=1014002916=34.774 J.
  5. α100=34.774⇒α=3477.4≈3477.

Short trick: Replace the top branch and 4 Ω by a Thevenin source: E′=3/61/6+1/4=1.2 V, r′=2.4 Ω; then solve one loop for VX and the 6 Ω current follows.

Answer: 3477

अवधारणा: नोड विश्लेषण। दायीं संधि को Y (VY=0), बाएँ कोने को L तथा 3 Ω व 4 Ω के बीच की संधि को X कहिए। प्रत्येक सेल की लम्बी प्लेट धन टर्मिनल है: 2 V सेल से VL=+2 V; ऊपरी शाखा में 3 V सेल की धन प्लेट X की ओर है।

  1. ऊपरी शाखा में X से Y की ओर धारा: i6=VX−3−06।
  2. X पर KCL: 2−VX3=VX4+VX−36। 12 से गुणा करने पर: 8−4VX=3VX+2VX−6⇒VX=149 V।
  3. i6=14/9−36=−1354 A, अर्थात् 1354 A धारा Y से X की ओर।
  4. ऊष्मा H=i2Rt=(1354)2×6×100=1014002916=34.774 J।
  5. α100=34.774⇒α=3477.4≈3477।

शॉर्ट ट्रिक: ऊपरी शाखा तथा 4 Ω को थेवेनिन स्रोत से बदलिए: E′=3/61/6+1/4=1.2 V, r′=2.4 Ω; फिर एक पाश से VX ज्ञात कर 6 Ω की धारा निकालिए।

उत्तर: 3477

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsCurrent Electricity – Kirchhoff's laws & Joule heatingJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q72.
An unpolarized light of intensity I0 passes through polarizer and then through a certain optically active solution and finally it goes to analyser. If the angle between analyser and polariser is 0∘ and intensity of light emerged from analyser is 38I0, the angle of rotation of the light by the solution with respect to analyser is ______ degrees.
I0 तीव्रता का एक अध्रुवित प्रकाश ध्रुवक (polarizer) से, फिर एक प्रकाशिक सक्रिय विलयन से गुजरता है तथा अन्त में विश्लेषक (analyser) पर जाता है। यदि विश्लेषक तथा ध्रुवक के बीच कोण 0∘ है तथा विश्लेषक से निर्गत प्रकाश की तीव्रता 38I0 है, तो विश्लेषक के सापेक्ष विलयन द्वारा प्रकाश का घूर्णन कोण ______ डिग्री है।
Show answer

Concept: The polariser passes I02; the solution rotates the plane by θ, so by Malus' law the analyser (parallel to the polariser) passes I02cos2⁡θ.

  1. I02cos2⁡θ=38I0.
  2. cos2⁡θ=34⇒cos⁡θ=32.
  3. θ=30∘.

Short trick: 3/81/2=34=cos2⁡30∘.

Answer: 30

अवधारणा: ध्रुवक I02 तीव्रता पारित करता है; विलयन ध्रुवण तल को θ से घुमाता है, अतः मैलस नियम से विश्लेषक (ध्रुवक के समान्तर) I02cos2⁡θ पारित करता है।

  1. I02cos2⁡θ=38I0।
  2. cos2⁡θ=34⇒cos⁡θ=32।
  3. θ=30∘।

शॉर्ट ट्रिक: 3/81/2=34=cos2⁡30∘।

उत्तर: 30

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – polarisation & optical activityJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q73.
The energy released when 717.13 kg of 37Li is converted into 24He by proton bombardment is α×1032 eV. The value of α is ____. (Nearest integer)
(Mass of 37Li=7.0183 u, mass of 24He=4.004 u, mass of proton =1.008 u and 1 u=931 MeV/c2 and Avogadro number =6.0×1023)
जब 717.13 kg 37Li को प्रोटॉन बमबारी द्वारा 24He में परिवर्तित किया जाता है, तब मुक्त ऊर्जा α×1032 eV है। α का मान ____ है। (निकटतम पूर्णांक)
(37Li का द्रव्यमान =7.0183 u, 24He का द्रव्यमान =4.004 u, प्रोटॉन का द्रव्यमान =1.008 u तथा 1 u=931 MeV/c2 और आवोगाद्रो संख्या =6.0×1023)
Show answer

Concept: Reaction 37Li+11H→224He. Energy per reaction Q=Δm×931 MeV; multiply by the number of Li nuclei.

  1. Δm=(7.0183+1.008)−2×4.004=0.0183 u.
  2. Q=0.0183×931=17.04 MeV =1.704×107 eV per reaction.
  3. Moles of Li =7000/17.13 g7 g/mol=100017.13=58.38; nuclei N=58.38×6.0×1023=3.503×1025.
  4. E=3.503×1025×1.704×107=5.97×1032 eV (using 7.0183 g/mol gives 5.95×1032).
  5. α≈6.

Short trick: 17.13≈Q in MeV, so E≈1000Q×6×1023×Q×106=6×1032 eV.

Answer: 6

अवधारणा: अभिक्रिया 37Li+11H→224He। प्रति अभिक्रिया ऊर्जा Q=Δm×931 MeV; इसे Li नाभिकों की संख्या से गुणा कीजिए।

  1. Δm=(7.0183+1.008)−2×4.004=0.0183 u।
  2. Q=0.0183×931=17.04 MeV =1.704×107 eV प्रति अभिक्रिया।
  3. Li के मोल =7000/17.13 g7 g/mol=100017.13=58.38; नाभिक N=58.38×6.0×1023=3.503×1025।
  4. E=3.503×1025×1.704×107=5.97×1032 eV (7.0183 g/mol लेने पर 5.95×1032)।
  5. α≈6।

शॉर्ट ट्रिक: 17.13≈ MeV में Q, अतः E≈1000Q×6×1023×Q×106=6×1032 eV।

उत्तर: 6

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsNuclei – Q-value & energy releasedJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q74.
A three coulomb charge moves from the point (0,−2,−5) to the point (5,1,2) in an electric field expressed as E→=2xi^+3y2j^+4k^ N/C. The work done in moving the charge is ______J.
तीन कूलॉम का एक आवेश E→=2xi^+3y2j^+4k^ N/C द्वारा व्यक्त विद्युत क्षेत्र में बिन्दु (0,−2,−5) से बिन्दु (5,1,2) तक गति करता है। आवेश को गति कराने में किया गया कार्य ______J है।
Show answer

Concept: Work done by the field W=q∫E→⋅dr→. The field is conservative (E→=∇(x2+y3+4z)), so the path does not matter.

  1. ∫E→⋅dr→=[x2]05+[y3]−21+[4z]−52.
  2. =(25−0)+(1−(−8))+(8−(−20))=25+9+28=62 V.
  3. W=3×62=186 J.

Short trick: Treat f=x2+y3+4z as a potential function: W=q[f(B)−f(A)]=3[(25+1+8)−(0−8−20)]=3×62.

Answer: 186

अवधारणा: क्षेत्र द्वारा किया गया कार्य W=q∫E→⋅dr→। क्षेत्र संरक्षी है (E→=∇(x2+y3+4z)), अतः पथ का कोई प्रभाव नहीं।

  1. ∫E→⋅dr→=[x2]05+[y3]−21+[4z]−52।
  2. =(25−0)+(1−(−8))+(8−(−20))=25+9+28=62 V।
  3. W=3×62=186 J।

शॉर्ट ट्रिक: f=x2+y3+4z को विभव-फलन मानिए: W=q[f(B)−f(A)]=3[(25+1+8)−(0−8−20)]=3×62।

उत्तर: 186

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – work done by electric fieldJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q75.
A certain gas is isothermally compressed to (13)rd of its initial volume (V0=3 litre) by applying required pressure. If the bulk modulus of the gas is 3×105 N/m2, the magnitude of work done on the gas is _____J.
किसी गैस को आवश्यक दाब लगाकर समतापीय रूप से उसके प्रारम्भिक आयतन (V0=3 लीटर) के (13) भाग तक संपीडित किया जाता है। यदि गैस का आयतन प्रत्यास्थता गुणांक (bulk modulus) 3×105 N/m2 है, तो गैस पर किए गए कार्य का परिमाण _____J है।
Show answer

Concept: For an isothermal process PV= const, so the isothermal bulk modulus B=−VdPdV=P. Hence the initial pressure is P0=3×105 Pa. Work on the gas =P0V0ln⁡V0Vf.

  1. P0V0=3×105×3×10−3=900 J.
  2. Won=900ln⁡3=900×1.0986=988.75 J.
  3. Nearest integer: 989 J.

Short trick: Isothermal B=P, so |W|=BV0ln⁡3=900×1.0986≈989 J.

Answer: 989

अवधारणा: समतापीय प्रक्रम में PV= नियत, अतः समतापीय आयतन प्रत्यास्थता गुणांक B=−VdPdV=P। अतः प्रारम्भिक दाब P0=3×105 Pa। गैस पर कार्य =P0V0ln⁡V0Vf।

  1. P0V0=3×105×3×10−3=900 J।
  2. Won=900ln⁡3=900×1.0986=988.75 J।
  3. निकटतम पूर्णांक: 989 J।

शॉर्ट ट्रिक: समतापीय B=P, अतः |W|=BV0ln⁡3=900×1.0986≈989 J।

उत्तर: 989

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – isothermal work & bulk modulusJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q76.
Match List - I with List - II.
List - IList - II
A.Meter (L)I.hcG
B.Second (S)II.Ghc5
C.Kilogram (M)III.K2L2c3Gh
D.Kelvin (K)IV.Ghc3
where h (Planck's constant), G (gravitational constant) and c (speed of light in vacuum) as fundamental units.
Choose the correct answer from the options given below :
सूची-I का सूची-II से मिलान कीजिए।
सूची - Iसूची - II
A.मीटर (L)I.hcG
B.सेकण्ड (S)II.Ghc5
C.किलोग्राम (M)III.K2L2c3Gh
D.केल्विन (K)IV.Ghc3
जहाँ h (प्लांक नियतांक), G (गुरुत्वाकर्षण नियतांक) तथा c (निर्वात में प्रकाश की चाल) को मूल मात्रक माना गया है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :
  1. AA-II, B-IV, C-I, D-III
  2. BA-IV, B-II, C-I, D-III
  3. CA-IV, B-I, C-II, D-III
  4. DA-III, B-I, C-II, D-IV
Show answer

Concept: Use [h]=ML2T−1, [G]=M−1L3T−2, [c]=LT−1 and check the dimension of each expression in List-II.

  1. hcG=(ML2T−1)(LT−1)M−1L3T−2=M2 ⇒ hc/G is a mass: C → I.
  2. Ghc3=(M−1L3T−2)(ML2T−1)L3T−3=L2 ⇒ Gh/c3 is a length: A → IV.
  3. Ghc5=L5T−3L5T−5=T2 ⇒ Gh/c5 is a time: B → II.
  4. The only expression left (III, containing the constant K) goes with Kelvin: D → III.
  5. So A-IV, B-II, C-I, D-III. (A) has A-II, (C) and (D) put C with II — both wrong because Gh/c5 is a time, not a length or a mass.

Short trick: Planck length Gℏ/c3, Planck time Gℏ/c5, Planck mass ℏc/G — remember "length c3, time c5, mass c upstairs".

Answer: (B) A-IV, B-II, C-I, D-III

अवधारणा: [h]=ML2T−1, [G]=M−1L3T−2, [c]=LT−1 लेकर सूची-II के प्रत्येक व्यंजक की विमा जाँचिए।

  1. hcG=(ML2T−1)(LT−1)M−1L3T−2=M2 ⇒ hc/G एक द्रव्यमान है: C → I।
  2. Ghc3=(M−1L3T−2)(ML2T−1)L3T−3=L2 ⇒ Gh/c3 एक लम्बाई है: A → IV।
  3. Ghc5=L5T−3L5T−5=T2 ⇒ Gh/c5 एक समय है: B → II।
  4. शेष व्यंजक (III, जिसमें नियतांक K है) केल्विन से मेल खाता है: D → III।
  5. अतः A-IV, B-II, C-I, D-III। (A) में A-II है, (C) तथा (D) में C-II है — दोनों गलत, क्योंकि Gh/c5 समय है, न कि लम्बाई या द्रव्यमान।

शॉर्ट ट्रिक: प्लांक लम्बाई Gℏ/c3, प्लांक समय Gℏ/c5, प्लांक द्रव्यमान ℏc/G — "लम्बाई में c3, समय में c5, द्रव्यमान में c ऊपर" याद रखिए।

उत्तर: (B) A-IV, B-II, C-I, D-III

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsUnits & Dimensions – Planck unitsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q77.
In an experiment to determine the resistance of a given wire using Ohm's law, the voltmeter and ammeter readings are noted as 10 V and 5 A, respectively. The least counts of voltmeter and ammeter are 500 mV and 200 mA, respectively. The estimated error in the resistance measurement is ________ Ω
ओम के नियम का उपयोग करके किसी दिए गए तार का प्रतिरोध ज्ञात करने के एक प्रयोग में वोल्टमीटर तथा अमीटर के पाठ्यांक क्रमशः 10 V तथा 5 A नोट किए गए। वोल्टमीटर तथा अमीटर के अल्पतमांक (least count) क्रमशः 500 mV तथा 200 mA हैं। प्रतिरोध के मापन में आकलित त्रुटि ________ Ω है।
  1. A0.25
  2. B2
  3. C2.5
  4. D0.18
Show answer

Concept: For R=V/I, relative errors add: ΔRR=ΔVV+ΔII, with ΔV,ΔI = least counts.

  1. R=105=2 Ω.
  2. ΔRR=0.510+0.25=0.05+0.04=0.09.
  3. ΔR=0.09×2=0.18 Ω.

Short trick: 5% + 4% = 9% of 2 Ω = 0.18 Ω.

Answer: (D) 0.18

अवधारणा: R=V/I के लिए आपेक्षिक त्रुटियाँ जुड़ती हैं: ΔRR=ΔVV+ΔII, जहाँ ΔV,ΔI = अल्पतमांक।

  1. R=105=2 Ω।
  2. ΔRR=0.510+0.25=0.05+0.04=0.09।
  3. ΔR=0.09×2=0.18 Ω।

शॉर्ट ट्रिक: 5% + 4% = 9%, और 2 Ω का 9% = 0.18 Ω।

उत्तर: (D) 0.18

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsUnits & Measurements – errorsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q78.
A mass of 1 kg is kept on a inclined plane with 30° inclination with respect to horizontal plane and it is at rest initially. Then the whole assembly is moved up with constant velocity of 4 m/s. The work done by the frictional force in time 2 s is ________ J. (Take g=10 m/s2)
1 kg का एक द्रव्यमान क्षैतिज तल से 30° झुकाव वाले एक नत तल पर रखा है तथा प्रारम्भ में विरामावस्था में है। फिर सम्पूर्ण व्यवस्था को 4 m/s के नियत वेग से ऊपर की ओर गति कराई जाती है। 2 s के समय में घर्षण बल द्वारा किया गया कार्य ________ J है। (g=10 m/s2 लीजिए)
  1. A20
  2. B25
  3. C30
  4. D10
Show answer

Concept: The block stays at rest relative to the incline, so static friction balances mgsin⁡θ along the incline. The assembly moves vertically up, so work = (vertical component of friction) × (vertical displacement).

  1. Friction (up the incline) f=mgsin⁡30∘=1×10×12=5 N.
  2. Vertical component of friction =fsin⁡30∘=5×12=2.5 N (upward).
  3. Displacement in 2 s =4×2=8 m (upward).
  4. Wf=2.5×8=20 J.

Short trick: Wf=mgsin2⁡θ⋅vt=10×14×8=20 J (normal force does the other mgcos2⁡θ⋅vt=60 J; total =mgh=80 J).

Answer: (A) 20

अवधारणा: गुटका नत तल के सापेक्ष विराम में रहता है, अतः स्थैतिक घर्षण नत तल के अनुदिश mgsin⁡θ को सन्तुलित करता है। व्यवस्था ऊर्ध्वाधर ऊपर चलती है, अतः कार्य = (घर्षण का ऊर्ध्वाधर घटक) × (ऊर्ध्वाधर विस्थापन)।

  1. घर्षण (नत तल के अनुदिश ऊपर) f=mgsin⁡30∘=1×10×12=5 N।
  2. घर्षण का ऊर्ध्वाधर घटक =fsin⁡30∘=5×12=2.5 N (ऊपर की ओर)।
  3. 2 s में विस्थापन =4×2=8 m (ऊपर)।
  4. Wf=2.5×8=20 J।

शॉर्ट ट्रिक: Wf=mgsin2⁡θ⋅vt=10×14×8=20 J (अभिलम्ब बल शेष mgcos2⁡θ⋅vt=60 J कार्य करता है; कुल =mgh=80 J)।

उत्तर: (A) 20

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWork, Energy & Power – work by frictionJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q79.
The velocity (v) versus time (t) plot of a particle is shown in the figure, for a time interval of 40 s. The total distance travelled by the particle and the average velocity during this period are, respectively ________.
किसी कण के वेग (v) तथा समय (t) का ग्राफ चित्र में 40 s के समय अन्तराल के लिए दर्शाया गया है। इस अवधि में कण द्वारा तय की गई कुल दूरी तथा औसत वेग क्रमशः ________ हैं।
  1. A25 m and zero25 m तथा शून्य
  2. B50 m and zero50 m तथा शून्य
  3. C100 m and zero100 m तथा शून्य
  4. D100 m and 2.5 m/s100 m तथा 2.5 m/s
Show answer

Concept: Distance = total area between the v–t graph and the time axis (all taken positive); displacement = signed area; average velocity = displacement / time.

  1. Area of the upper triangle (0 to 20 s) =12×20×5=50 m.
  2. Area of the lower triangle (20 to 40 s) =12×20×5=50 m (below the axis, i.e. −50 m).
  3. Distance =50+50=100 m; displacement =50−50=0.
  4. Average velocity =0/40=0. (D) uses distance/time, which is average speed, not average velocity.

Short trick: Equal areas above and below the axis ⇒ displacement zero, distance = twice one area.

Answer: (C) 100 m and zero

अवधारणा: दूरी = v–t ग्राफ तथा समय-अक्ष के बीच का कुल क्षेत्रफल (सभी धनात्मक); विस्थापन = चिह्न सहित क्षेत्रफल; औसत वेग = विस्थापन / समय।

  1. ऊपरी त्रिभुज (0 से 20 s) का क्षेत्रफल =12×20×5=50 m।
  2. निचले त्रिभुज (20 से 40 s) का क्षेत्रफल =12×20×5=50 m (अक्ष के नीचे, अर्थात् −50 m)।
  3. दूरी =50+50=100 m; विस्थापन =50−50=0।
  4. औसत वेग =0/40=0। (D) में दूरी/समय लिया है, जो औसत चाल है, औसत वेग नहीं।

शॉर्ट ट्रिक: अक्ष के ऊपर व नीचे बराबर क्षेत्रफल ⇒ विस्थापन शून्य, दूरी = एक क्षेत्रफल का दोगुना।

उत्तर: (C) 100 m तथा शून्य

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsKinematics – v-t graphJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q80.
A wheel initially at rest is subjected to a uniform angular acceleration about its axis. In the first 2 s it rotates through an angle θ1 and in the next 2 s it rotates through an angle θ2. The ratio θ2θ1 is ________.
प्रारम्भ में विराम में स्थित एक पहिये पर उसकी अक्ष के परितः एकसमान कोणीय त्वरण लगाया जाता है। प्रथम 2 s में यह θ1 कोण से घूमता है तथा अगले 2 s में θ2 कोण से घूमता है। अनुपात θ2θ1 ________ है।
  1. A6
  2. B3
  3. C4
  4. D13
Show answer

Concept: From rest, θ=12αt2.

  1. θ1=12α(2)2=2α.
  2. Angle in 4 s =12α(4)2=8α, so θ2=8α−2α=6α.
  3. θ2θ1=6α2α=3.

Short trick: Equal successive intervals from rest cover angles in the ratio 1 : 3 : 5 … ⇒ 3.

Answer: (B) 3

अवधारणा: विराम से, θ=12αt2।

  1. θ1=12α(2)2=2α।
  2. 4 s में कोण =12α(4)2=8α, अतः θ2=8α−2α=6α।
  3. θ2θ1=6α2α=3।

शॉर्ट ट्रिक: विराम से बराबर क्रमागत समय अन्तरालों में कोण 1 : 3 : 5 … के अनुपात में होते हैं ⇒ 3।

उत्तर: (B) 3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRotational Motion – rotational kinematicsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2