JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) · 750 questions

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

250 questions in Physics.

Q181.
Given below are two statements:
Statement I: The hot water flows faster than cold water
Statement II: Soap water has higher surface tension as compared to fresh water.
In the light above statements, choose the correct answer from the options given below
नीचे दो कथन दिए गए हैं:
कथन I: गर्म पानी, ठंडे पानी की अपेक्षा तेज़ी से बहता है
कथन II: साबुन के पानी का पृष्ठ तनाव (surface tension), स्वच्छ पानी की अपेक्षा अधिक होता है।
उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए
  1. AStatement I is true but Statement II is falseकथन I सत्य है परंतु कथन II असत्य है
  2. BStatement I is false but Statement II is trueकथन I असत्य है परंतु कथन II सत्य है
  3. CBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  4. DBoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
Show answer

Concept: Viscosity of liquids decreases on heating; dissolving soap/detergent lowers the surface tension of water.

  1. Statement I: On heating, the viscosity of water falls, so hot water meets less internal friction and flows faster than cold water — true.
  2. Statement II: Soap molecules accumulate at the surface and reduce surface tension (that is why soap water spreads and wets better) — soap water has lower surface tension than fresh water, so the statement is false.

Short trick: Soap always lowers surface tension — that is the whole point of a detergent.

Answer: (A) Statement I is true but Statement II is false

अवधारणा: गर्म करने पर द्रवों की श्यानता (viscosity) घटती है; साबुन/अपमार्जक घोलने पर पानी का पृष्ठ तनाव घटता है।

  1. कथन I: गर्म करने पर पानी की श्यानता घट जाती है, अतः गर्म पानी को आंतरिक घर्षण कम मिलता है और वह ठंडे पानी से तेज़ बहता है — सत्य।
  2. कथन II: साबुन के अणु सतह पर एकत्र होकर पृष्ठ तनाव घटा देते हैं (इसीलिए साबुन का पानी बेहतर फैलता और भिगोता है) — साबुन के पानी का पृष्ठ तनाव स्वच्छ पानी से कम होता है, अतः कथन असत्य।

शॉर्ट ट्रिक: साबुन सदैव पृष्ठ तनाव घटाता है — अपमार्जक का यही तो कार्य है।

उत्तर: (A) कथन I सत्य है परंतु कथन II असत्य है

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsFluid mechanics – viscosity and surface tensionJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q182.
Consider a circular disc of radius 20 cm with centre located at the origin. A circular hole of radius 5 cm is cut from this disc in such a way that the edge of the hole touches the edge of the disc. The distance of centre of mass of residual or remaining disc from the origin will be
मूल बिंदु पर केंद्र वाली 20 cm त्रिज्या की एक वृत्ताकार चकती लीजिए। इस चकती से 5 cm त्रिज्या का एक वृत्ताकार छिद्र इस प्रकार काटा जाता है कि छिद्र का किनारा चकती के किनारे को स्पर्श करता है। शेष बची चकती के द्रव्यमान केंद्र की मूल बिंदु से दूरी होगी
  1. A2.0 cm
  2. B1.5 cm
  3. C1.0 cm
  4. D0.5 cm
Show answer

Concept: Treat the hole as negative mass. For a uniform disc of radius R with a hole of radius r whose centre is at distance d from the disc centre: xcm=−r2dR2−r2.

  1. The hole touches the edge internally, so its centre is at d=20−5=15 cm from the origin.
  2. xcm=−(5)2(15)(20)2−(5)2=−375375=−1 cm.
  3. Distance of the centre of mass of the remaining disc from the origin =1.0 cm (on the side opposite to the hole).

Short trick: Masses scale as areas: mhole/mdisc=1/16; shift =mholedmdisc−mhole=1515=1 cm.

Answer: (C) 1.0 cm

अवधारणा: छिद्र को ऋणात्मक द्रव्यमान मानें। R त्रिज्या की एकसमान चकती में r त्रिज्या का छिद्र, जिसका केंद्र चकती के केंद्र से d दूरी पर है: xcm=−r2dR2−r2।

  1. छिद्र किनारे को भीतर से छूता है, अतः उसका केंद्र मूल बिंदु से d=20−5=15 cm पर है।
  2. xcm=−(5)2(15)(20)2−(5)2=−375375=−1 cm।
  3. शेष चकती के द्रव्यमान केंद्र की मूल बिंदु से दूरी =1.0 cm (छिद्र के विपरीत ओर)।

शॉर्ट ट्रिक: द्रव्यमान क्षेत्रफल के अनुपात में: mछिद्र/mचकती=1/16; विस्थापन =mछिद्रdmचकती−mछिद्र=1515=1 cm।

उत्तर: (C) 1.0 cm

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsCentre of mass – disc with cavityJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q183.
The electric flux is ϕ=ασ+βλ where λ and σ are linear and surface charge density, respectively. (αβ) represents
विद्युत फ्लक्स ϕ=ασ+βλ है, जहाँ λ तथा σ क्रमशः रैखिक एवं पृष्ठ आवेश घनत्व हैं। (αβ) निरूपित करता है
  1. Aelectric fieldविद्युत क्षेत्र
  2. Bareaक्षेत्रफल
  3. Cchargeआवेश
  4. Ddisplacementविस्थापन
Show answer

Concept: Both terms must have the dimension of electric flux. [σ]=[Q]L2, [λ]=[Q]L.

  1. [ασ]=[ϕ]⇒[α]=[ϕ]L2[Q].
  2. [βλ]=[ϕ]⇒[β]=[ϕ]L[Q].
  3. [αβ]=L2L=L — the dimension of length, i.e. displacement.

Short trick: αβ=λσ dimensionally =Q/LQ/L2=L.

Answer: (D) displacement

अवधारणा: दोनों पदों की विमा विद्युत फ्लक्स की होनी चाहिए। [σ]=[Q]L2, [λ]=[Q]L।

  1. [ασ]=[ϕ]⇒[α]=[ϕ]L2[Q]।
  2. [βλ]=[ϕ]⇒[β]=[ϕ]L[Q]।
  3. [αβ]=L2L=L — लंबाई की विमा, अर्थात विस्थापन।

शॉर्ट ट्रिक: विमीय रूप से αβ=λσ=Q/LQ/L2=L।

उत्तर: (D) विस्थापन

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsUnits and dimensions – electric fluxJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q184.
A sub-atomic particle of mass 10−30 kg is moving with a velocity 2.21×106 m/s. Under the matter wave consideration, the particle will behave closely like (h=6.63×10−34 J.s)
10−30 kg द्रव्यमान का एक उप-परमाण्विक कण 2.21×106 m/s वेग से गतिमान है। द्रव्य तरंग (matter wave) की दृष्टि से यह कण लगभग किसके समान व्यवहार करेगा? (h=6.63×10−34 J.s)
  1. AVisible radiationदृश्य विकिरण
  2. BGamma raysगामा किरणें
  3. CInfra-red radiationअवरक्त (इन्फ्रा-रेड) विकिरण
  4. DX-raysX-किरणें
Show answer

Concept: de Broglie wavelength λ=hmv; then compare with the electromagnetic spectrum.

  1. λ=6.63×10−3410−30×2.21×106=6.63×10−342.21×10−24=3×10−10 m.
  2. λ=3 Å =0.3 nm, which lies in the X-ray region (∼0.01–10 nm).
  3. Visible light is 400–700 nm, infra-red is longer still, and gamma rays are shorter than about 0.01 nm — none of these match.

Short trick: 6.63/2.21=3; powers: 10−34+30−6=10−10 m → a few Å → X-rays.

Answer: (D) X-rays

अवधारणा: डी-ब्रॉग्ली तरंगदैर्घ्य λ=hmv; फिर विद्युतचुंबकीय स्पेक्ट्रम से तुलना करें।

  1. λ=6.63×10−3410−30×2.21×106=6.63×10−342.21×10−24=3×10−10 m।
  2. λ=3 Å =0.3 nm, जो X-किरण क्षेत्र (∼0.01–10 nm) में आता है।
  3. दृश्य प्रकाश 400–700 nm, अवरक्त उससे भी लंबा, तथा गामा किरणें लगभग 0.01 nm से छोटी होती हैं — इनमें से कोई मेल नहीं खाता।

शॉर्ट ट्रिक: 6.63/2.21=3; घातें: 10−34+30−6=10−10 m → कुछ Å → X-किरणें।

उत्तर: (D) X-किरणें

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsDual nature – matter wavesJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q185.
Consider a moving coil galvanomenter (MCG):
A. The torsional constant in moving coil galvanometer has dimentions [ML2T−2]
B. Increasing the current sensitivity may not necessarily increase the voltage sensitivity.
C. If we increase number of turns (N) to its double (2N), then the voltage sensitivity doubles.
D. MCG can be converted into an ammeter by introducing a shunt resistance of large value in parallel with galvanometer.
E. Current sensitivity of MCG depends inversely on number of turns of coil.
Choose the correct answer from the options given below:
एक चल कुंडली धारामापी (MCG) पर विचार कीजिए:
A. चल कुंडली धारामापी में ऐंठन नियतांक (torsional constant) की विमाएँ [ML2T−2] हैं
B. धारा सुग्राहिता बढ़ाने से वोल्टता सुग्राहिता का बढ़ना आवश्यक नहीं है।
C. यदि फेरों की संख्या (N) को दुगुना (2N) कर दें, तो वोल्टता सुग्राहिता दुगुनी हो जाती है।
D. धारामापी के समांतर बड़े मान का शंट प्रतिरोध लगाकर MCG को अमीटर में बदला जा सकता है।
E. MCG की धारा सुग्राहिता कुंडली के फेरों की संख्या के व्युत्क्रमानुपाती होती है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AA, D Onlyकेवल A, D
  2. BA, B, E Onlyकेवल A, B, E
  3. CB, D, E Onlyकेवल B, D, E
  4. DA, B Onlyकेवल A, B
Show answer

Concept: For an MCG, current sensitivity θI=NABk and voltage sensitivity θV=NABkRg, where k is the torsional constant and Rg the coil resistance.

  1. A: k = torque per unit twist; torque has dimensions [ML2T−2] and angle is dimensionless, so [k]=[ML2T−2] — correct.
  2. B: Doubling N doubles current sensitivity, but Rg also roughly doubles (more wire), so voltage sensitivity need not rise — correct.
  3. C: With N→2N, Rg→2Rg as well, so θV stays nearly unchanged, it does not double — wrong.
  4. D: An ammeter needs a small shunt in parallel, not a large one — wrong.
  5. E: Current sensitivity is directly proportional to N, not inverse — wrong.

Short trick: Remember the pair: current sensitivity ∝N; voltage sensitivity ∝N/Rg — and Rg grows with N.

Answer: (D) A, B Only

अवधारणा: MCG के लिए धारा सुग्राहिता θI=NABk तथा वोल्टता सुग्राहिता θV=NABkRg, जहाँ k ऐंठन नियतांक और Rg कुंडली का प्रतिरोध है।

  1. A: k = प्रति एकांक ऐंठन बल-आघूर्ण; बल-आघूर्ण की विमाएँ [ML2T−2] हैं और कोण विमाहीन है, अतः [k]=[ML2T−2] — सही।
  2. B: N दुगुना करने पर धारा सुग्राहिता दुगुनी होती है, परंतु Rg भी लगभग दुगुना हो जाता है (तार अधिक), अतः वोल्टता सुग्राहिता का बढ़ना आवश्यक नहीं — सही।
  3. C: N→2N के साथ Rg→2Rg भी, अतः θV लगभग अपरिवर्तित रहती है, दुगुनी नहीं होती — गलत।
  4. D: अमीटर के लिए समांतर में छोटा शंट चाहिए, बड़ा नहीं — गलत।
  5. E: धारा सुग्राहिता N के अनुक्रमानुपाती है, व्युत्क्रमानुपाती नहीं — गलत।

शॉर्ट ट्रिक: यह जोड़ी याद रखें: धारा सुग्राहिता ∝N; वोल्टता सुग्राहिता ∝N/Rg — और Rg, N के साथ बढ़ता है।

उत्तर: (D) केवल A, B

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsMoving coil galvanometerJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q186.
LIST-ILIST-II
A.Pressure varies inversely with volume of an ideal gas.I.Adiabatic process
B.Heat absorbed goes partly to increase internal energy and partly to do work.II.Isochoric process
C.Heat is neither absorbed nor released by a system.III.Isothermal process
D.No work is done on or by a gas.IV.Isobaric process
सूची-Iसूची-II
A.आदर्श गैस का दाब, आयतन के व्युत्क्रमानुपाती बदलता है।I.रुद्धोष्म प्रक्रम
B.अवशोषित ऊष्मा का कुछ भाग आंतरिक ऊर्जा बढ़ाने में तथा कुछ भाग कार्य करने में जाता है।II.समआयतनिक प्रक्रम
C.निकाय द्वारा ऊष्मा न अवशोषित होती है, न उत्सर्जित।III.समतापी प्रक्रम
D.गैस पर या गैस द्वारा कोई कार्य नहीं होता।IV.समदाबी प्रक्रम
  1. AA-III, B-IV, C-I, D-II
  2. BA-I, B-IV, C-II, D-III
  3. CA-III, B-I, C-IV, D-II
  4. DA-I, B-III, C-II, D-IV
Show answer

Concept: Identify each thermodynamic process from its defining property and the first law ΔQ=ΔU+ΔW.

  1. A: P∝1V means PV= constant, i.e. Boyle's law at constant temperature → Isothermal (III).
  2. B: ΔQ=ΔU+ΔW with all three non-zero happens at constant pressure → Isobaric (IV).
  3. C: No heat exchange (ΔQ=0) → Adiabatic (I).
  4. D: ΔW=PΔV=0 means constant volume → Isochoric (II).
  5. So A-III, B-IV, C-I, D-II. Options (B), (C), (D) each mismatch at least one pair (e.g. (C) pairs "no heat" with isochoric, (B) and (D) pair P∝1/V with adiabatic, which actually has PVγ= const).

Short trick: PV= const → isothermal; Q=0 → adiabatic; W=0 → isochoric; the "partly-partly" statement is the isobaric one.

Answer: (A) A-III, B-IV, C-I, D-II

अवधारणा: प्रत्येक ऊष्मागतिक प्रक्रम को उसके परिभाषक गुण तथा प्रथम नियम ΔQ=ΔU+ΔW से पहचानें।

  1. A: P∝1V का अर्थ PV= नियत, अर्थात नियत ताप पर बॉयल का नियम → समतापी (III)।
  2. B: ΔQ=ΔU+ΔW में तीनों अशून्य — यह नियत दाब पर होता है → समदाबी (IV)।
  3. C: ऊष्मा का आदान-प्रदान नहीं (ΔQ=0) → रुद्धोष्म (I)।
  4. D: ΔW=PΔV=0 अर्थात आयतन नियत → समआयतनिक (II)।
  5. अतः A-III, B-IV, C-I, D-II। विकल्प (B), (C), (D) में कम-से-कम एक युग्म गलत है (जैसे (C) में "ऊष्मा नहीं" को समआयतनिक से, (B) व (D) में P∝1/V को रुद्धोष्म से जोड़ा गया है, जबकि रुद्धोष्म में PVγ= नियत होता है)।

शॉर्ट ट्रिक: PV= नियत → समतापी; Q=0 → रुद्धोष्म; W=0 → समआयतनिक; "कुछ भाग–कुछ भाग" वाला कथन समदाबी का है।

उत्तर: (A) A-III, B-IV, C-I, D-II

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – processes (match the list)JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q187.
The electric field of an electromagnetic wave in free space is E→=57cos⁡[7.5×106t−5×10−3(3x+4y)](4i^−3j^)N/C. The associated magnetic field in Tesla is
मुक्त आकाश में एक विद्युतचुंबकीय तरंग का विद्युत क्षेत्र E→=57cos⁡[7.5×106t−5×10−3(3x+4y)](4i^−3j^)N/C है। संबद्ध चुंबकीय क्षेत्र (टेस्ला में) है
  1. AB→=573×108cos⁡[7.5×106t−5×10−3(3x+4y)](k^)
  2. BB→=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](k^)
  3. CB→=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^)
  4. DB→=573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^)
Show answer

Concept: For an EM wave, B→=1c(k^×E→), where k^ is the propagation direction read from the phase.

  1. Phase ∝(3x+4y), so the wave vector is along (3i^+4j^), i.e. k^=3i^+4j^5. (Check: ωk=7.5×1065×10−3×5=3×108 m/s =c.)
  2. Electric field direction E^=4i^−3j^5, amplitude E0=57×5=285 N/C.
  3. k^×E^=125(3i^+4j^)×(4i^−3j^)=125(−9−16)k^=−k^ (unit vector k^ here means z^).
  4. So B→=−2853×108cos⁡[7.5×106t−5×10−3(3x+4y)]k^=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^) T.

Short trick: |B0|=E0/c with E0=57×5; only options (B) and (C) have the minus sign from k^×E^=−z^, and only (C) keeps the factor 5.

Answer: (C) B→=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^)

अवधारणा: विद्युतचुंबकीय तरंग के लिए B→=1c(k^×E→), जहाँ k^ कला (phase) से प्राप्त संचरण दिशा है।

  1. कला ∝(3x+4y), अतः तरंग सदिश (3i^+4j^) के अनुदिश है, अर्थात k^=3i^+4j^5। (जाँच: ωk=7.5×1065×10−3×5=3×108 m/s =c।)
  2. विद्युत क्षेत्र की दिशा E^=4i^−3j^5, आयाम E0=57×5=285 N/C।
  3. k^×E^=125(3i^+4j^)×(4i^−3j^)=125(−9−16)k^=−k^ (यहाँ k^ से आशय z^)।
  4. अतः B→=−2853×108cos⁡[7.5×106t−5×10−3(3x+4y)]k^=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^) T।

शॉर्ट ट्रिक: |B0|=E0/c जिसमें E0=57×5; ऋण चिह्न k^×E^=−z^ से केवल विकल्प (B) व (C) में है, और 5 का गुणांक केवल (C) में सुरक्षित है।

उत्तर: (C) B→=−573×108cos⁡[7.5×106t−5×10−3(3x+4y)](5k^)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic wavesJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q188.
A gun fires a lead bullet of temperature 300 K into a wooden block. The bullet having melting temperature of 600 K penetrates into the block and melts down. If the total heat required for the process is 625 J, then the mass of the bullet is ______ grams. (Latent heat of fusion of lead =2.5×104JKg−1 and specific heat capacity of lead =125JKg−1K−1)
एक बंदूक 300 K ताप की सीसे (lead) की गोली लकड़ी के गुटके में दागती है। 600 K गलनांक वाली यह गोली गुटके में धँसकर पिघल जाती है। यदि इस प्रक्रिया के लिए कुल आवश्यक ऊष्मा 625 J है, तो गोली का द्रव्यमान ______ ग्राम है। (सीसे की गलन की गुप्त ऊष्मा =2.5×104JKg−1 तथा सीसे की विशिष्ट ऊष्मा धारिता =125JKg−1K−1)
  1. A10
  2. B20
  3. C5
  4. D15
Show answer

Concept: Total heat = heat to raise temperature to the melting point + latent heat of melting: Q=mcΔT+mL.

  1. ΔT=600−300=300 K.
  2. Q=m(cΔT+L)=m(125×300+2.5×104)=m(37500+25000)=62500m.
  3. 62500m=625⇒m=0.01 kg =10 g.

Short trick: cΔT+L=62.5 kJ/kg; 625 J ÷ 62.5 kJ/kg =10 g directly.

Answer: (A) 10

अवधारणा: कुल ऊष्मा = गलनांक तक ताप बढ़ाने की ऊष्मा + गलन की गुप्त ऊष्मा: Q=mcΔT+mL।

  1. ΔT=600−300=300 K।
  2. Q=m(cΔT+L)=m(125×300+2.5×104)=m(37500+25000)=62500m।
  3. 62500m=625⇒m=0.01 kg =10 g।

शॉर्ट ट्रिक: cΔT+L=62.5 kJ/kg; 625 J ÷ 62.5 kJ/kg =10 g सीधे।

उत्तर: (A) 10

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsCalorimetry – heat and change of stateJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q189.
What is the lateral shift of a ray refracted through a parallel-sided glass slab of thickness 'h' in terms of the angle of incidence 'i' and angle of refraction 'r', if the glass slab is placed in air medium?
वायु माध्यम में रखी 'h' मोटाई की समांतर फलकों वाली काँच की पट्टिका (glass slab) से अपवर्तित किरण का पार्श्व विस्थापन (lateral shift), आपतन कोण 'i' तथा अपवर्तन कोण 'r' के पदों में क्या है?
  1. Ahtan⁡(i−r)tan⁡r
  2. Bhsin⁡(i−r)cos⁡r
  3. Ch
  4. Dhcos⁡(i−r)sin⁡r
Show answer

Concept: In a parallel-sided slab the emergent ray is parallel to the incident ray but laterally displaced. Geometry of the refracted ray inside the slab gives the shift.

  1. The ray travels a path length PQ=hcos⁡r inside the slab (h = thickness).
  2. The lateral shift is the perpendicular distance between incident and emergent rays: d=PQsin⁡(i−r).
  3. Hence d=hsin⁡(i−r)cos⁡r.

Short trick: At normal incidence (i=r=0) the shift must vanish — options (C) and (D) fail at once; (A) gives the wrong limit h(1−r/tan⁡r)≠ standard form, while (B) is the memorised slab formula.

Answer: (B) hsin⁡(i−r)cos⁡r

अवधारणा: समांतर फलकों वाली पट्टिका से निर्गत किरण, आपतित किरण के समांतर परंतु पार्श्वतः विस्थापित होती है। पट्टिका के भीतर अपवर्तित किरण की ज्यामिति से विस्थापन मिलता है।

  1. पट्टिका के भीतर किरण की पथ लंबाई PQ=hcos⁡r (h = मोटाई)।
  2. पार्श्व विस्थापन, आपतित व निर्गत किरणों के बीच की लंब दूरी है: d=PQsin⁡(i−r)।
  3. अतः d=hsin⁡(i−r)cos⁡r।

शॉर्ट ट्रिक: अभिलंब आपतन (i=r=0) पर विस्थापन शून्य होना चाहिए — विकल्प (C) व (D) तुरंत असफल; (A) सही सीमा नहीं देता, जबकि (B) पट्टिका का मानक सूत्र है।

उत्तर: (B) hsin⁡(i−r)cos⁡r

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRay optics – lateral shift in glass slabJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q190.
A radioactive nucleus n2 has 3 times the decay constant as compared to the decay constant of another radioactive nucleus n1. If initial number of both nuclei are the same, what is the ratio of number of nuclei of n2 to the number of nuclei of n1, after one half-life of n1?
एक रेडियोऐक्टिव नाभिक n2 का क्षय नियतांक, दूसरे रेडियोऐक्टिव नाभिक n1 के क्षय नियतांक का 3 गुना है। यदि दोनों नाभिकों की प्रारंभिक संख्या समान है, तो n1 की एक अर्ध-आयु के पश्चात n2 के नाभिकों की संख्या का n1 के नाभिकों की संख्या से अनुपात क्या है?
  1. A1/8
  2. B8
  3. C4
  4. D1/4
Show answer

Concept: Radioactive decay law N=N0e−λt; one half-life of n1 means t=ln⁡2λ1.

  1. After t: N1=N0e−λ1t=N02.
  2. N2=N0e−3λ1t=N0e−3ln⁡2=N08.
  3. N2N1=1/81/2=14.

Short trick: In one half-life of n1, n2 completes 3 half-lives: n2 left =(12)3, n1 left =12; ratio =(12)2=14.

Answer: (D) 1/4

अवधारणा: रेडियोऐक्टिव क्षय नियम N=N0e−λt; n1 की एक अर्ध-आयु का अर्थ t=ln⁡2λ1।

  1. t के पश्चात: N1=N0e−λ1t=N02।
  2. N2=N0e−3λ1t=N0e−3ln⁡2=N08।
  3. N2N1=1/81/2=14।

शॉर्ट ट्रिक: n1 की एक अर्ध-आयु में n2 की 3 अर्ध-आयु पूरी होती हैं: n2 शेष =(12)3, n1 शेष =12; अनुपात =(12)2=14।

उत्तर: (D) 1/4

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsNuclear physics – radioactive decayJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q191.
A light hollow cube of side length 10 cm and mass 10 g, is floating in water. It is pushed down and released to execute simple harmonic oscillations. The time period of oscillations is yπ×10−2 s, where the value of y is (Acceleration due to gravity, g=10m/s2, density of water =103kg/m3)
10 cm भुजा तथा 10 g द्रव्यमान का एक हल्का खोखला घन पानी में तैर रहा है। इसे नीचे दबाकर छोड़ने पर यह सरल आवर्त दोलन करता है। दोलनों का आवर्तकाल yπ×10−2 s है, जहाँ y का मान है (गुरुत्वीय त्वरण g=10m/s2, पानी का घनत्व =103kg/m3)
  1. A6
  2. B2
  3. C4
  4. D1
Show answer

Concept: A floating body pushed down by x feels an extra buoyant restoring force F=−ρAgx, giving SHM with T=2πmρAg.

  1. m=10 g =0.01 kg; cross-sectional area A=(0.10)2=0.01m2; ρ=103kg/m3.
  2. ρAg=103×0.01×10=100 N/m.
  3. T=2π0.01100=2π10−4=2π×10−2 s.
  4. Comparing with yπ×10−2 s: y=2.

Short trick: m/(ρAg)=10−4=10−2 — the whole answer is just 2π×10−2.

Answer: (B) 2

अवधारणा: तैरते पिंड को x नीचे दबाने पर अतिरिक्त उत्प्लावन प्रत्यानयन बल F=−ρAgx लगता है, जिससे सरल आवर्त गति होती है: T=2πmρAg।

  1. m=10 g =0.01 kg; अनुप्रस्थ काट क्षेत्रफल A=(0.10)2=0.01m2; ρ=103kg/m3।
  2. ρAg=103×0.01×10=100 N/m।
  3. T=2π0.01100=2π10−4=2π×10−2 s।
  4. yπ×10−2 s से तुलना करने पर: y=2।

शॉर्ट ट्रिक: m/(ρAg)=10−4=10−2 — पूरा उत्तर बस 2π×10−2 है।

उत्तर: (B) 2

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsOscillations – SHM of floating bodyJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q192.
Regarding self-inductance:
A. The self-inductance of the coil depends on its geometry.
B. Self-inductance does not depend on the permeability of the medium.
C. Self-induced e.m.f. opposes any change in the current in a circuit.
D. Self-inductance is electromagnetic analogue of mass in mechanics.
E. Work needs to be done against self-induced e.m.f. in establishing the current.
Choose the correct answer from the options given below:
स्वप्रेरकत्व (self-inductance) के संबंध में:
A. कुंडली का स्वप्रेरकत्व उसकी ज्यामिति पर निर्भर करता है।
B. स्वप्रेरकत्व माध्यम की चुंबकशीलता (permeability) पर निर्भर नहीं करता।
C. स्वप्रेरित विद्युत वाहक बल (e.m.f.) परिपथ में धारा के किसी भी परिवर्तन का विरोध करता है।
D. स्वप्रेरकत्व, यांत्रिकी में द्रव्यमान का विद्युतचुंबकीय अनुरूप (analogue) है।
E. धारा स्थापित करने में स्वप्रेरित e.m.f. के विरुद्ध कार्य करना पड़ता है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AA, B, C, E onlyकेवल A, B, C, E
  2. BB, C, D, E onlyकेवल B, C, D, E
  3. CA, C, D, E onlyकेवल A, C, D, E
  4. DA, B, C, D onlyकेवल A, B, C, D
Show answer

Concept: For a solenoid-like coil L=μn2V — it depends on geometry and on the permeability μ of the medium; self-induced e.m.f. follows Lenz's law.

  1. A: L depends on turns, length, area — geometry — true.
  2. B: L∝μ (e.g. an iron core raises L enormously) — false.
  3. C: By Lenz's law the self-induced e.m.f. opposes any change of current — true.
  4. D: L opposes change of current just as mass (inertia) opposes change of velocity; energy 12LI2↔12mv2 — true.
  5. E: Establishing a current requires work against the back e.m.f., stored as 12LI2 — true.
  6. Correct: A, C, D, E.

Short trick: Spot the single false statement (B — permeability definitely matters) and pick the option that omits only B.

Answer: (C) A, C, D, E only

अवधारणा: परिनालिका-सदृश कुंडली के लिए L=μn2V — यह ज्यामिति और माध्यम की चुंबकशीलता μ दोनों पर निर्भर है; स्वप्रेरित e.m.f. लेंज़ के नियम का पालन करता है।

  1. A: L फेरों, लंबाई, क्षेत्रफल — अर्थात ज्यामिति — पर निर्भर है — सत्य।
  2. B: L∝μ (जैसे लोहे की क्रोड L को बहुत बढ़ा देती है) — असत्य।
  3. C: लेंज़ के नियम से स्वप्रेरित e.m.f. धारा के हर परिवर्तन का विरोध करता है — सत्य।
  4. D: जैसे द्रव्यमान (जड़त्व) वेग-परिवर्तन का विरोध करता है, वैसे L धारा-परिवर्तन का; ऊर्जा 12LI2↔12mv2 — सत्य।
  5. E: धारा स्थापित करने में विरोधी e.m.f. के विरुद्ध कार्य करना पड़ता है, जो 12LI2 के रूप में संचित होता है — सत्य।
  6. सही: A, C, D, E।

शॉर्ट ट्रिक: एकमात्र असत्य कथन (B — चुंबकशीलता निश्चित रूप से प्रभाव डालती है) पहचानें और वही विकल्प चुनें जिसमें केवल B नहीं है।

उत्तर: (C) केवल A, C, D, E

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic induction – self-inductanceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q193.
The motion of an airplane is represented by velocity-time graph as shown below. The distance covered by airplane in the first 30.5 second is ______ km.
एक वायुयान की गति नीचे दर्शाए गए वेग-समय ग्राफ द्वारा निरूपित है। पहले 30.5 सेकंड में वायुयान द्वारा तय की गई दूरी ______ km है।
  1. A12
  2. B3
  3. C6
  4. D9
Show answer

Concept: Distance = area under the velocity-time graph.

  1. From t=0 to t=2 s the velocity rises linearly from 200 m/s (B) to 400 m/s (A): area = (200+400)2×2=600 m.
  2. From t=2 s to t=30.5 s the velocity is constant at 400 m/s: area = 400×28.5=11400 m.
  3. Total distance =600+11400=12000 m =12 km.

Short trick: Nearly the whole time is at 400 m/s: 400×30.5≈12.2 km; the small trapezoidal correction brings it to exactly 12 km — only option (A) is close.

Answer: (A) 12

अवधारणा: दूरी = वेग-समय ग्राफ के नीचे का क्षेत्रफल।

  1. t=0 से t=2 s तक वेग 200 m/s (B) से 400 m/s (A) तक रैखिक बढ़ता है: क्षेत्रफल = (200+400)2×2=600 m।
  2. t=2 s से t=30.5 s तक वेग 400 m/s पर नियत है: क्षेत्रफल = 400×28.5=11400 m।
  3. कुल दूरी =600+11400=12000 m =12 km।

शॉर्ट ट्रिक: लगभग पूरा समय 400 m/s पर है: 400×30.5≈12.2 km; छोटे समलंब संशोधन से ठीक 12 km — केवल विकल्प (A) निकट है।

उत्तर: (A) 12

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsKinematics – velocity-time graphJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q194.
Identify the valid statements relevant to the given circuit at the instant when the key is closed.

A. There will be no current through resistor R.
B. There will be maximum current in the connecting wires.
C. Potential difference between the capacitor plates A and B is minimum.
D. Charge on the capacitor plates is minimum.
Choose the correct answer from the options given below:
कुंजी (key) बंद करने के क्षण पर, दिए गए परिपथ से संबंधित मान्य कथनों की पहचान कीजिए।

A. प्रतिरोध R से कोई धारा नहीं बहेगी।
B. संयोजक तारों में अधिकतम धारा होगी।
C. संधारित्र की प्लेटों A तथा B के बीच विभवांतर न्यूनतम है।
D. संधारित्र की प्लेटों पर आवेश न्यूनतम है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AA, C Onlyकेवल A, C
  2. BA, B, D Onlyकेवल A, B, D
  3. CC, D Onlyकेवल C, D
  4. DB, C, D Onlyकेवल B, C, D
Show answer

Concept: At the instant of switching on, an uncharged capacitor behaves like a plain conducting wire (q=0, VC=q/C=0), so the charging current is maximum: i0=ER.

  1. B: At t=0 the current everywhere in the series loop is maximum (E/R) — true.
  2. C: VAB=q/C=0, its minimum value — true.
  3. D: q=0, minimum — true.
  4. A: The same maximum current flows through R too (R is in series with the capacitor), so "no current through R" is false.

Short trick: Capacitor at t=0 → short circuit; capacitor at t→∞ → open circuit. "Key just closed" means short circuit: maximum current, zero charge, zero voltage.

Answer: (D) B, C, D Only

अवधारणा: कुंजी बंद करने के क्षण पर अनावेशित संधारित्र सीधे चालक तार की तरह व्यवहार करता है (q=0, VC=q/C=0), अतः आवेशन धारा अधिकतम होती है: i0=ER।

  1. B: t=0 पर श्रेणी लूप में हर जगह धारा अधिकतम (E/R) है — सत्य।
  2. C: VAB=q/C=0, न्यूनतम मान — सत्य।
  3. D: q=0, न्यूनतम — सत्य।
  4. A: वही अधिकतम धारा R से होकर भी बहती है (R संधारित्र के श्रेणीक्रम में है), अतः "R से कोई धारा नहीं" असत्य है।

शॉर्ट ट्रिक: t=0 पर संधारित्र → लघु पथ (short); t→∞ पर → खुला परिपथ। "कुंजी अभी बंद हुई" का अर्थ short: अधिकतम धारा, शून्य आवेश, शून्य वोल्टता।

उत्तर: (D) केवल B, C, D

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsCapacitors – transient at switch-onJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q195.
A solid sphere of mass 'm' and radius 'r' is allowed to roll without slipping from the highest point of an inclined plane of length 'L' and makes an angle 30∘ with the horizontal. The speed of the particle at the bottom of the plane is v1. If the angle of inclination is increased to 45∘ while keeping L constant. Then the new speed of the sphere at the bottom of the plane is v2. The ratio v12:v22 is
'm' द्रव्यमान तथा 'r' त्रिज्या का एक ठोस गोला, क्षैतिज से 30∘ कोण बनाने वाले 'L' लंबाई के नत समतल के उच्चतम बिंदु से बिना फिसले लुढ़कने दिया जाता है। समतल की तली पर इसकी चाल v1 है। L को नियत रखते हुए नति कोण 45∘ कर देने पर तली पर गोले की नई चाल v2 है। अनुपात v12:v22 है
  1. A1:2
  2. B1:3
  3. C1:3
  4. D1:2
Show answer

Concept: Rolling without slipping down an incline of length L: energy conservation gives v2=2gLsin⁡θ1+k2r2; for a solid sphere k2r2=25, so v2=107gLsin⁡θ.

  1. v2∝sin⁡θ (same L, same sphere).
  2. v12v22=sin⁡30∘sin⁡45∘=1/21/2=22=12.
  3. So v12:v22=1:2.

Short trick: Height fallen =Lsin⁡θ, so v2∝sin⁡θ — the moment of inertia factor cancels in the ratio.

Answer: (A) 1:2

अवधारणा: L लंबाई के नत समतल पर बिना फिसले लुढ़कने में ऊर्जा संरक्षण से v2=2gLsin⁡θ1+k2r2; ठोस गोले के लिए k2r2=25, अतः v2=107gLsin⁡θ।

  1. v2∝sin⁡θ (समान L, समान गोला)।
  2. v12v22=sin⁡30∘sin⁡45∘=1/21/2=12।
  3. अतः v12:v22=1:2।

शॉर्ट ट्रिक: गिरी ऊँचाई =Lsin⁡θ, अतः v2∝sin⁡θ — जड़त्व आघूर्ण वाला गुणक अनुपात में कट जाता है।

उत्तर: (A) 1:2

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRotational motion – rolling on inclineJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q196.
A positive ion A and a negative ion B has charges 6.67×10−19 C and 9.6×10−10 C, and masses 19.2×10−27 kg and 9×10−27 kg respectively. At an instant, the ions are separated by a certain distance r. At that instant the ratio of the magnitudes of electrostatic force to gravitational force is P×1045, where the value of 10P is ______. (Take 14πε0=9×109Nm2C−1 and universal gravitational constant as 6.67×10−11Nm2kg−2)
Assume that charge may not be an integral multiple of electrons.
एक धनायन A तथा एक ऋणायन B पर क्रमशः 6.67×10−19 C तथा 9.6×10−10 C आवेश और 19.2×10−27 kg तथा 9×10−27 kg द्रव्यमान हैं। किसी क्षण दोनों आयन एक निश्चित दूरी r से पृथक हैं। उस क्षण स्थिरवैद्युत बल तथा गुरुत्वाकर्षण बल के परिमाणों का अनुपात P×1045 है, जहाँ 10P का मान ______ है। (14πε0=9×109Nm2C−1 तथा सार्वत्रिक गुरुत्वाकर्षण नियतांक 6.67×10−11Nm2kg−2 लीजिए)
मान लीजिए कि आवेश, इलेक्ट्रॉन आवेश का पूर्णांक गुणज नहीं भी हो सकता है।
Show answer

Concept: Both forces follow inverse-square laws, so r cancels in the ratio: FeFg=kq1q2Gm1m2.

  1. Numerator: kq1q2=9×109×6.67×10−19×9.6×10−10=5.763×10−18Nm2.
  2. Denominator: Gm1m2=6.67×10−11×19.2×10−27×9×10−27=1.1526×10−62Nm2.
  3. FeFg=5.763×10−181.1526×10−62=0.5×1045.
  4. So P=0.5 and 10P=5.

Short trick: 9×6.67×9.66.67×19.2×9=9.619.2=12; powers: 109−19−10−(−11−27−27)=1045.

Answer: 5

अवधारणा: दोनों बल व्युत्क्रम-वर्ग नियम का पालन करते हैं, अतः अनुपात में r कट जाता है: FeFg=kq1q2Gm1m2।

  1. अंश: kq1q2=9×109×6.67×10−19×9.6×10−10=5.763×10−18Nm2।
  2. हर: Gm1m2=6.67×10−11×19.2×10−27×9×10−27=1.1526×10−62Nm2।
  3. FeFg=5.763×10−181.1526×10−62=0.5×1045।
  4. अतः P=0.5 तथा 10P=5।

शॉर्ट ट्रिक: 9×6.67×9.66.67×19.2×9=9.619.2=12; घातें: 109−19−10−(−11−27−27)=1045।

उत्तर: 5

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – Coulomb vs gravitational forceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q197.

In the given circuit the sliding contact is pulled outwards such that electric current in the circuit changes at the rate of 8 A/s. At an instant when R is 12Ω, the value of the current in the circuit will be ______ A.

दिए गए परिपथ में सर्पी संपर्क (sliding contact) को बाहर की ओर इस प्रकार खींचा जाता है कि परिपथ में विद्युत धारा 8 A/s की दर से बदलती है। जिस क्षण R का मान 12Ω है, उस क्षण परिपथ में धारा का मान ______ A होगा।
Show answer

Concept: Kirchhoff's voltage law for an L-R circuit: E=Ldidt+iR. Pulling the rheostat contact outwards increases R, so the current is decreasing: didt=−8 A/s.

  1. 12=3×(−8)+i×12
  2. 12=−24+12i
  3. 12i=36⇒i=3 A.

Short trick: i=E+L|di/dt|R=12+2412=3 A — the inductor's e.m.f. aids the battery while the current falls.

Answer: 3

अवधारणा: L-R परिपथ के लिए किरचॉफ का वोल्टता नियम: E=Ldidt+iR। धारा नियंत्रक (rheostat) का संपर्क बाहर खींचने से R बढ़ता है, अतः धारा घट रही है: didt=−8 A/s।

  1. 12=3×(−8)+i×12
  2. 12=−24+12i
  3. 12i=36⇒i=3 A।

शॉर्ट ट्रिक: i=E+L|di/dt|R=12+2412=3 A — धारा घटते समय प्रेरक का e.m.f. बैटरी की सहायता करता है।

उत्तर: 3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic induction – L-R circuitJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q198.
Two particles are located at equal distance from origin. The position vectors of those are represented by A→=2i^+3nj^+2k^ and B→=2i^−2j^+4pk^, respectively. If both the vectors are at right angle to each other, the value of n−1 is ______.
दो कण मूल बिंदु से समान दूरी पर स्थित हैं। उनके स्थिति सदिश क्रमशः A→=2i^+3nj^+2k^ तथा B→=2i^−2j^+4pk^ द्वारा निरूपित हैं। यदि दोनों सदिश परस्पर लंबवत हैं, तो n−1 का मान ______ है।
Show answer

Concept: Equal distances give |A→|=|B→|; perpendicularity gives A→⋅B→=0. Two equations, two unknowns (n, p).

  1. |A→|2=|B→|2: 4+9n2+4=4+4+16p2⇒9n2=16p2⇒p=±3n4.
  2. A→⋅B→=0: 4−6n+8p=0.
  3. With p=+3n4: 4−6n+6n=4≠0 — rejected. With p=−3n4: 4−6n−6n=0⇒n=13.
  4. n−1=3.

Short trick: The 8p term must combine with −6n to kill the constant 4; only p=−3n4 works, giving 12n=4 at once.

Answer: 3

अवधारणा: समान दूरी से |A→|=|B→|; लंबवतता से A→⋅B→=0। दो समीकरण, दो अज्ञात (n, p)।

  1. |A→|2=|B→|2: 4+9n2+4=4+4+16p2⇒9n2=16p2⇒p=±3n4।
  2. A→⋅B→=0: 4−6n+8p=0।
  3. p=+3n4 लेने पर: 4−6n+6n=4≠0 — अस्वीकार्य। p=−3n4 लेने पर: 4−6n−6n=0⇒n=13।
  4. n−1=3।

शॉर्ट ट्रिक: नियतांक 4 को समाप्त करने के लिए 8p पद को −6n के साथ मिलना होगा; केवल p=−3n4 से यह संभव है, जिससे तुरंत 12n=4।

उत्तर: 3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsVectors – perpendicular vectorsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q199.
An ideal gas initially at 0∘C temperature, is compressed suddenly to one fourth of its volume. If the ratio of specific heat at constant pressure to that at constant volume is 3/2, the change in temperature due to the thermodynamic process is ______ K.
प्रारंभ में 0∘C ताप पर स्थित एक आदर्श गैस को अचानक संपीडित कर उसके आयतन का एक-चौथाई कर दिया जाता है। यदि नियत दाब पर विशिष्ट ऊष्मा का नियत आयतन पर विशिष्ट ऊष्मा से अनुपात 3/2 है, तो इस ऊष्मागतिक प्रक्रम के कारण ताप में परिवर्तन ______ K है।
Show answer

Concept: A sudden compression is adiabatic: TVγ−1= constant, with γ=32.

  1. T1=0∘C=273 K; V2=V14.
  2. T2=T1(V1V2)γ−1=273×(4)1/2=273×2=546 K.
  3. ΔT=546−273=273 K.

Short trick: γ−1=12 and 41/2=2 — the temperature simply doubles, so the rise equals the initial 273 K.

Answer: 273

अवधारणा: अचानक संपीडन रुद्धोष्म होता है: TVγ−1= नियत, जहाँ γ=32।

  1. T1=0∘C=273 K; V2=V14।
  2. T2=T1(V1V2)γ−1=273×(4)1/2=273×2=546 K।
  3. ΔT=546−273=273 K।

शॉर्ट ट्रिक: γ−1=12 तथा 41/2=2 — ताप बस दुगुना हो जाता है, अतः वृद्धि प्रारंभिक 273 K के बराबर है।

उत्तर: 273

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – adiabatic processJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1
Q200.
A force f=x2yi^+y2j^ acts on a particle in a plane x+y=10. The work done by this force during a displacement from (0,0) to (4m,2m) is ______ Joule (round off to the nearest integer)
एक बल f=x2yi^+y2j^ किसी कण पर समतल x+y=10 में कार्य करता है। (0,0) से (4m,2m) तक विस्थापन के दौरान इस बल द्वारा किया गया कार्य ______ जूल है (निकटतम पूर्णांक तक सन्निकटित कीजिए)
Show answer

Concept: Work by a variable force: W=∫f→⋅dr→=∫fxdx+∫fydy. The given plane supplies the constraint y=10−x to be used in the x-integration.

  1. W=∫04x2ydx+∫02y2dy, with y=10−x in the first integral.
  2. ∫04x2(10−x)dx=[10x33−x44]04=6403−64=4483 J.
  3. ∫02y2dy=83 J.
  4. W=4483+83=4563=152 J.

Short trick: The y-part is tiny (8/3); almost all the work comes from ∫x2(10−x)dx — compute that first and add 8/3.

Answer: 152

अवधारणा: परिवर्ती बल द्वारा कार्य: W=∫f→⋅dr→=∫fxdx+∫fydy। दिया गया समतल x-समाकलन में प्रयुक्त होने वाला बंधन y=10−x देता है।

  1. W=∫04x2ydx+∫02y2dy, जहाँ पहले समाकल में y=10−x।
  2. ∫04x2(10−x)dx=[10x33−x44]04=6403−64=4483 J।
  3. ∫02y2dy=83 J।
  4. W=4483+83=4563=152 J।

शॉर्ट ट्रिक: y-वाला भाग बहुत छोटा (8/3) है; लगभग पूरा कार्य ∫x2(10−x)dx से आता है — पहले वही निकालें और 8/3 जोड़ दें।

उत्तर: 152

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsWork, energy and power – work by variable forceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 1