JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) · 750 questions

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

250 questions in Chemistry.

Q141.
Following are the four molecules "P", "Q", "R" and "S". Which one among the four molecules will react with

H−Br(aq) at the fastest rate?
निम्नलिखित चार अणु "P", "Q", "R" तथा "S" हैं। इन चारों में से कौन-सा अणु

H−Br(aq) से सबसे तीव्र गति से अभिक्रिया करेगा?
  1. AR
  2. BP
  3. CQ
  4. DS
Show answer

Concept: The rate of HBr addition is decided by the stability of the carbocation formed on protonation; a vinyl ether gives an oxocarbenium ion (C=O+ resonance), which is far more stable than ordinary 3° carbocations.

  1. Q is an enol (vinyl) ether – the C=C is directly attached to the ring oxygen. Protonation at the β-carbon gives a cation in which the oxygen lone pair delocalises: every atom gets an octet (oxocarbenium) – most stable intermediate, hence fastest reaction.
  2. P also contains oxygen, but its C=C is not conjugated with O; oxygen then acts only by its electron-withdrawing −I effect and slows the addition.
  3. R (1-methylcyclohexene) and S (1,2-dimethylcyclohexene) form ordinary 3° alkyl carbocations – stabilised only by hyperconjugation/+I, much less than the oxocarbenium of Q.

Short trick: C=C−O−R (vinyl ether) + H+ → oxocarbenium → fastest Markovnikov addition.

Answer: (C)

अवधारणा: HBr योग की दर प्रोटॉनन से बनने वाले कार्बधनायन के स्थायित्व से तय होती है; वाइनिल ईथर ऑक्सोकार्बेनियम आयन (C=O+ अनुनाद) देता है, जो साधारण 3° कार्बधनायनों से कहीं अधिक स्थायी है।

  1. Q एक ईनॉल (वाइनिल) ईथर है – C=C सीधे वलय के ऑक्सीजन से जुड़ा है। β-कार्बन पर प्रोटॉनन से ऐसा धनायन बनता है जिसमें ऑक्सीजन का एकाकी युग्म विस्थानीकृत होता है: प्रत्येक परमाणु का अष्टक पूर्ण (ऑक्सोकार्बेनियम) – सर्वाधिक स्थायी मध्यवर्ती, अतः अभिक्रिया सबसे तीव्र।
  2. P में भी ऑक्सीजन है, परन्तु उसका C=C ऑक्सीजन से संयुग्मित नहीं; तब ऑक्सीजन केवल इलेक्ट्रॉन-आकर्षी −I प्रभाव से योग को धीमा करता है।
  3. R (1-मेथिलसाइक्लोहेक्सीन) तथा S (1,2-डाइमेथिलसाइक्लोहेक्सीन) साधारण 3° ऐल्किल कार्बधनायन बनाते हैं – केवल अतिसंयुग्मन/+I से स्थायी, जो Q के ऑक्सोकार्बेनियम से बहुत कम है।

शॉर्ट ट्रिक: C=C−O−R (वाइनिल ईथर) + H+ → ऑक्सोकार्बेनियम → सबसे तीव्र मार्कोनिकोव योग।

उत्तर: (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryAlkenes – electrophilic addition of HBrJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q142.
For the given cell Fe(aq)2++Ag(aq)+→Fe(aq)3++Ag(s) The standard cell potential of the above reaction is
Given: Ag++e−→Ag  Eθ=xV
Fe2++2e−→Fe  Eθ=yV
Fe3++3e−→Fe  Eθ=zV
दिए गए सेल Fe(aq)2++Ag(aq)+→Fe(aq)3++Ag(s) के लिए उपर्युक्त अभिक्रिया का मानक सेल विभव है
दिया है: Ag++e−→Ag  Eθ=xV
Fe2++2e−→Fe  Eθ=yV
Fe3++3e−→Fe  Eθ=zV
  1. Ax+y−z
  2. Bx+2y
  3. Cx+2y−3z
  4. Dy−2x
Show answer

Concept: Electrode potentials are not additive, but ΔG° (= −nFE°) is. Combine half-reactions through their ΔG° values.

  1. Required anode half-reaction: Fe2+ → Fe3+ + e−. First find Eθ(Fe3+/Fe2+).
  2. Fe3+ + 3e− → Fe: ΔG° = −3Fz. Fe2+ + 2e− → Fe: ΔG° = −2Fy.
  3. Subtracting: Fe3+ + e− → Fe2+: ΔG° = −3Fz + 2Fy = −F(3z − 2y) ⇒ Eθ(Fe3+/Fe2+)=3z−2y.
  4. Ecellθ=Ecathodeθ−Eanodeθ=x−(3z−2y)=x+2y−3z.

Answer: (C)

अवधारणा: इलेक्ट्रोड विभव योगशील नहीं होते, परन्तु ΔG° (= −nFE°) योगशील है। अर्ध-अभिक्रियाओं को उनके ΔG° से जोड़िए।

  1. अपेक्षित ऐनोड अर्ध-अभिक्रिया: Fe2+ → Fe3+ + e−। पहले Eθ(Fe3+/Fe2+) ज्ञात करें।
  2. Fe3+ + 3e− → Fe: ΔG° = −3Fz। Fe2+ + 2e− → Fe: ΔG° = −2Fy।
  3. घटाने पर: Fe3+ + e− → Fe2+: ΔG° = −3Fz + 2Fy = −F(3z − 2y) ⇒ Eθ(Fe3+/Fe2+)=3z−2y।
  4. Ecellθ=Eकैथोडθ−Eऐनोडθ=x−(3z−2y)=x+2y−3z।

उत्तर: (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryElectrochemistry – combining electrode potentialsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q143.
The large difference between the melting and boiling points of oxygen and sulphur may be explained on the basis of
ऑक्सीजन तथा सल्फर के गलनांक एवं क्वथनांक में बड़े अन्तर की व्याख्या किस आधार पर की जा सकती है?
  1. AAtomicityपरमाणुकता (Atomicity)
  2. BElectron gain enthalpyइलेक्ट्रॉन लब्धि एन्थैल्पी
  3. CElectronegativityविद्युत् ऋणात्मकता
  4. DAtomic sizeपरमाणु आकार
Show answer

Concept: Melting/boiling points of molecular solids depend on the size of the molecule and hence on the strength of London dispersion forces.

  1. Oxygen exists as small diatomic O2 molecules – very weak dispersion forces – gas at room temperature (m.p. ≈ 55 K).
  2. Sulphur exists as large puckered S8 rings – much stronger dispersion forces – solid (m.p. ≈ 393 K).
  3. This difference in the number of atoms per molecule, i.e. atomicity (O2 vs S8), explains the large gap.
  4. Electron gain enthalpy, electronegativity and atomic size differences cannot account for such a huge difference in physical state of the elements.

Answer: (A)

अवधारणा: आण्विक ठोसों के गलनांक/क्वथनांक अणु के आकार और इसलिए लन्दन परिक्षेपण बलों की प्रबलता पर निर्भर करते हैं।

  1. ऑक्सीजन छोटे द्विपरमाणुक O2 अणुओं के रूप में रहती है – अत्यन्त दुर्बल परिक्षेपण बल – कमरे के ताप पर गैस (गलनांक ≈ 55 K)।
  2. सल्फर बड़े वलित S8 वलयों के रूप में रहता है – कहीं अधिक प्रबल परिक्षेपण बल – ठोस (गलनांक ≈ 393 K)।
  3. प्रति अणु परमाणुओं की संख्या का यह अन्तर, अर्थात् परमाणुकता (O2 बनाम S8), इस बड़े अन्तर की व्याख्या करता है।
  4. इलेक्ट्रॉन लब्धि एन्थैल्पी, विद्युत् ऋणात्मकता या परमाणु आकार के अन्तर से तत्वों की भौतिक अवस्था का इतना बड़ा अन्तर नहीं समझाया जा सकता।

उत्तर: (A)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)Chemistryp-block – oxygen vs sulphurJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q144.
Consider the given plots of vapour pressure (VP) vs temperature (T/K). Which amongst the following options is correct graphical representation showing ΔTf, depression in the freezing point of a solvent in a solution?
वाष्प दाब (VP) बनाम ताप (T/K) के दिए गए आलेखों पर विचार कीजिए। निम्नलिखित विकल्पों में से कौन-सा, विलयन में विलायक के हिमांक के अवनमन ΔTf को दर्शाने वाला सही आलेखीय निरूपण है?
  1. A
  2. B
  3. C
  4. D
Show answer

Concept: By Raoult's law the vapour pressure of a solution is lower than that of the pure liquid solvent at every temperature. The freezing point is the temperature at which the vapour-pressure curve of the solid (frozen) solvent crosses the liquid/solution curve.

  1. The solid-phase curve crosses the pure-liquid-solvent curve at Tf° and the (lower) solution curve at Tf, with Tf < Tf°; ΔTf = Tf° − Tf is read along the temperature axis. This is exactly what option (A) shows: solution curve below the liquid-solvent curve and both freezing points located at intersections with the solid curve.
  2. (B) and (C) wrongly locate Tf and Tf° on a horizontal constant-VP line instead of at intersections with the solid-solvent curve.
  3. (C) and (D) also draw the solution curve above the solvent curve, which violates Raoult's law for a non-volatile solute.

Answer: (A)

अवधारणा: राउल्ट के नियम से विलयन का वाष्प दाब प्रत्येक ताप पर शुद्ध द्रव विलायक से कम होता है। हिमांक वह ताप है जिस पर ठोस (जमे) विलायक का वाष्प-दाब वक्र द्रव/विलयन वक्र को काटता है।

  1. ठोस-प्रावस्था वक्र शुद्ध द्रव विलायक वक्र को Tf° पर तथा (नीचे वाले) विलयन वक्र को Tf पर काटता है, जहाँ Tf < Tf°; ΔTf = Tf° − Tf ताप अक्ष पर पढ़ा जाता है। विकल्प (A) ठीक यही दर्शाता है: विलयन वक्र द्रव विलायक वक्र के नीचे तथा दोनों हिमांक ठोस वक्र के प्रतिच्छेदों पर।
  2. (B) तथा (C) में Tf और Tf° को ठोस-विलायक वक्र के प्रतिच्छेदों के बजाय किसी क्षैतिज स्थिर-VP रेखा पर गलत ढंग से दिखाया गया है।
  3. (C) तथा (D) में विलयन वक्र विलायक वक्र के ऊपर खींचा गया है, जो अवाष्पशील विलेय के लिए राउल्ट के नियम का उल्लंघन है।

उत्तर: (A)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistrySolutions – depression in freezing pointJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q145.
Which of the following linear combination of atomic orbitals will lead to formation of molecular orbitals in homonuclear diatomic molecules [internuclear axis in z-direction]?
A. 2pz and 2px
B. 2s and 2px
C. 3dxy and 3dx²−y²
D. 2s and 2pz
E. 2pz and 3dx²−y²
Choose the correct answer from the options given below:
समनाभिकीय द्विपरमाणुक अणुओं में [अंतरानाभिकीय अक्ष z-दिशा में] परमाणु कक्षकों का निम्नलिखित में से कौन-सा रैखिक संयोजन आण्विक कक्षकों के निर्माण की ओर ले जाएगा?
A. 2pz तथा 2px
B. 2s तथा 2px
C. 3dxy तथा 3dx²−y²
D. 2s तथा 2pz
E. 2pz तथा 3dx²−y²
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AA and B Onlyकेवल A और B
  2. BD Onlyकेवल D
  3. CE Onlyकेवल E
  4. DC and D Onlyकेवल C और D
Show answer

Concept: Two atomic orbitals combine into molecular orbitals only if they have the same symmetry about the internuclear (z) axis and give non-zero net overlap: σ-type (s, pz, dz²) mixes with σ-type, π with π, δ with δ.

  1. A. 2pz (σ) with 2px (π): different symmetry → net overlap cancels → no MO.
  2. B. 2s (σ) with 2px (π): bonding and antibonding overlaps cancel → no MO.
  3. C. 3dxy and 3dx²−y²: both δ-type but of mutually orthogonal components (sin 2φ vs cos 2φ) → zero overlap → no MO.
  4. D. 2s and 2pz: both σ-symmetric about z-axis → non-zero overlap → MOs form. ✓
  5. E. 2pz (σ) with 3dx²−y² (δ): different symmetry → no MO.
  6. Hence only D leads to MO formation.

Answer: (B)

अवधारणा: दो परमाणु कक्षक आण्विक कक्षक तभी बनाते हैं जब उनकी अंतरानाभिकीय (z) अक्ष के परितः सममिति समान हो और नेट अतिव्यापन शून्य न हो: σ-प्रकार (s, pz, dz²) σ-प्रकार से, π π से, δ δ से मिलते हैं।

  1. A. 2pz (σ) और 2px (π): भिन्न सममिति → नेट अतिव्यापन निरस्त → MO नहीं।
  2. B. 2s (σ) और 2px (π): बन्धक व प्रतिबन्धक अतिव्यापन निरस्त → MO नहीं।
  3. C. 3dxy और 3dx²−y²: दोनों δ-प्रकार, परन्तु परस्पर लम्बकोणीय घटक (sin 2φ बनाम cos 2φ) → शून्य अतिव्यापन → MO नहीं।
  4. D. 2s और 2pz: दोनों z-अक्ष के परितः σ-सममित → अशून्य अतिव्यापन → MO बनते हैं। ✓
  5. E. 2pz (σ) और 3dx²−y² (δ): भिन्न सममिति → MO नहीं।
  6. अतः केवल D से MO बनते हैं।

उत्तर: (B)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryMolecular orbital theory – LCAOJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q146.
Xg of benzoic acid on reaction with aq NaHCO3 released CO2 that occupied 11.2 L volume at STP. X is _____ g.
X ग्राम बेन्ज़ोइक अम्ल, जलीय NaHCO3 से अभिक्रिया करने पर इतनी CO2 मुक्त करता है जो STP पर 11.2 L आयतन घेरती है। X का मान _____ ग्राम है।
Show answer

Concept: C6H5COOH + NaHCO3 → C6H5COONa + H2O + CO2; 1 mol acid releases 1 mol CO2; at STP 1 mol gas = 22.4 L.

  1. Moles of CO2 = 11.2 L ÷ 22.4 L mol−1 = 0.5 mol.
  2. 1 : 1 stoichiometry ⇒ moles of benzoic acid = 0.5 mol.
  3. Molar mass of C6H5COOH = 7(12) + 6(1) + 2(16) = 122 g mol−1.
  4. X = 0.5 × 122 = 61 g.

Answer: 61

अवधारणा: C6H5COOH + NaHCO3 → C6H5COONa + H2O + CO2; 1 मोल अम्ल 1 मोल CO2 मुक्त करता है; STP पर 1 मोल गैस = 22.4 L।

  1. CO2 के मोल = 11.2 L ÷ 22.4 L mol−1 = 0.5 मोल।
  2. 1 : 1 रससमीकरणमिति ⇒ बेन्ज़ोइक अम्ल के मोल = 0.5 मोल।
  3. C6H5COOH का मोलर द्रव्यमान = 7(12) + 6(1) + 2(16) = 122 g mol−1।
  4. X = 0.5 × 122 = 61 ग्राम।

उत्तर: 61

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryStoichiometry – mole conceptJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q147.
Consider the following reaction occurring in the blast furnace: Fe3O4(s)+4CO(g)→3Fe(l)+4CO2(g) 'x' kg of iron is produced when 2.32×103 kg Fe3O4 and 2.8×102 kg CO are brought together in the furnace. The value of 'x' is _____. (nearest integer) Given: molar mass of Fe3O4 = 232 g mol−1, molar mass of CO = 28 g mol−1, molar mass of Fe = 56 g mol−1
वात्या भट्ठी (blast furnace) में होने वाली निम्न अभिक्रिया पर विचार कीजिए: Fe3O4(s)+4CO(g)→3Fe(l)+4CO2(g) भट्ठी में 2.32×103 kg Fe3O4 तथा 2.8×102 kg CO को एक साथ लाने पर 'x' kg लोहा उत्पन्न होता है। 'x' का मान _____ है। (निकटतम पूर्णांक) दिया है: Fe3O4 का मोलर द्रव्यमान = 232 g mol−1, CO का मोलर द्रव्यमान = 28 g mol−1, Fe का मोलर द्रव्यमान = 56 g mol−1
Show answer

Concept: Identify the limiting reagent, then use mole ratios.

  1. Moles of Fe3O4 = 2.32×106 g232 g mol−1=104 mol; moles of CO = 2.8×105 g28 g mol−1=104 mol.
  2. Each mole of Fe3O4 needs 4 mol CO, so 104 mol CO can reduce only 1044=2.5×103 mol Fe3O4 ⇒ CO is the limiting reagent.
  3. Moles of Fe formed = 3×2.5×103=7.5×103 mol.
  4. Mass of Fe = 7.5×103×56=4.2×105 g = 420 kg.

Answer: 420

अवधारणा: सीमान्त अभिकर्मक पहचानिए, फिर मोल अनुपात का प्रयोग कीजिए।

  1. Fe3O4 के मोल = 2.32×106 g232 g mol−1=104 मोल; CO के मोल = 2.8×105 g28 g mol−1=104 मोल।
  2. प्रत्येक मोल Fe3O4 को 4 मोल CO चाहिए, अतः 104 मोल CO केवल 1044=2.5×103 मोल Fe3O4 को अपचयित कर सकती है ⇒ CO सीमान्त अभिकर्मक है।
  3. बने Fe के मोल = 3×2.5×103=7.5×103 मोल।
  4. Fe का द्रव्यमान = 7.5×103×56=4.2×105 g = 420 kg।

उत्तर: 420

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryStoichiometry – limiting reagentJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q148.
37.8 g N2O5 was taken in a 1 L reaction vessel and allowed to undergo the following reaction at 500 K: 2N2O5(g)⇌2N2O4(g)+O2(g) The total pressure at equilibrium was found to be 18.65 bar. Then, Kp = ______ ×10−2 [nearest integer] Assume N2O5 to behave ideally under these conditions. Given: R = 0.082 bar L mol−1 K−1
एक 1 L अभिक्रिया पात्र में 37.8 g N2O5 लेकर 500 K पर निम्न अभिक्रिया होने दी गई: 2N2O5(g)⇌2N2O4(g)+O2(g) साम्य पर कुल दाब 18.65 bar पाया गया। तब Kp = ______ ×10−2 [निकटतम पूर्णांक] मानिए कि इन परिस्थितियों में N2O5 आदर्श व्यवहार करता है। दिया है: R = 0.082 bar L mol−1 K−1
Show answer

Concept: Find the initial pressure from PV = nRT, use the pressure change to get equilibrium partial pressures, then Kp =PN2O42PO2PN2O52.

  1. Moles of N2O5 = 37.8 ÷ 108 = 0.35 mol; initial pressure P0=nRTV=0.35×0.082×5001=14.35 bar.
  2. Let O2 formed have pressure p: N2O5 = 14.35−2p, N2O4 = 2p, O2 = p; total = 14.35+p=18.65 ⇒ p=4.3 bar.
  3. So PN2O5=14.35−8.6=5.75 bar, PN2O4=8.6 bar, PO2=4.3 bar.
  4. Kp =(8.6)2(4.3)(5.75)2=318.0333.06=9.62 bar =962×10−2.

Answer: 962

अवधारणा: PV = nRT से प्रारम्भिक दाब निकालिए, दाब परिवर्तन से साम्य आंशिक दाब ज्ञात कीजिए, फिर Kp =PN2O42PO2PN2O52।

  1. N2O5 के मोल = 37.8 ÷ 108 = 0.35 मोल; प्रारम्भिक दाब P0=nRTV=0.35×0.082×5001=14.35 bar।
  2. माना बनी O2 का दाब p है: N2O5 = 14.35−2p, N2O4 = 2p, O2 = p; कुल = 14.35+p=18.65 ⇒ p=4.3 bar।
  3. अतः PN2O5=14.35−8.6=5.75 bar, PN2O4=8.6 bar, PO2=4.3 bar।
  4. Kp =(8.6)2(4.3)(5.75)2=318.0333.06=9.62 bar =962×10−2।

उत्तर: 962

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryChemical equilibrium – KpJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q149.
Among the following cations, the number of cations which will give characteristic precipitate in their identification tests with K4[Fe(CN)6] is _____.
Cu2+, Fe3+, Ba2+, Ca2+, NH4+, Mg2+, Zn2+
निम्नलिखित धनायनों में से उन धनायनों की संख्या _____ है जो अपने अभिज्ञान परीक्षणों में K4[Fe(CN)6] के साथ अभिलाक्षणिक अवक्षेप देते हैं।
Cu2+, Fe3+, Ba2+, Ca2+, NH4+, Mg2+, Zn2+
Show answer

Concept: In qualitative salt analysis, potassium ferrocyanide gives characteristic coloured precipitates with Cu2+, Fe3+ and Zn2+.

  1. Cu2+: chocolate-brown precipitate of Cu2[Fe(CN)6] – confirmatory test for copper.
  2. Fe3+: Prussian-blue precipitate of Fe4[Fe(CN)6]3 – confirmatory test for ferric ion.
  3. Zn2+: white (bluish-white) precipitate of Zn2[Fe(CN)6] – confirmatory test for zinc.
  4. Ba2+ and Ca2+ are identified by flame test/(NH4)2CO3–oxalate tests, NH4+ by Nessler's reagent and Mg2+ by Na2HPO4 – none of these uses K4[Fe(CN)6].
  5. Hence 3 cations.

Answer: 3

अवधारणा: गुणात्मक लवण विश्लेषण में पोटैशियम फेरोसायनाइड Cu2+, Fe3+ तथा Zn2+ के साथ अभिलाक्षणिक रंगीन अवक्षेप देता है।

  1. Cu2+: Cu2[Fe(CN)6] का चॉकलेटी-भूरा अवक्षेप – ताँबे का पुष्टिकारक परीक्षण।
  2. Fe3+: Fe4[Fe(CN)6]3 का प्रशियन-नीला अवक्षेप – फेरिक आयन का पुष्टिकारक परीक्षण।
  3. Zn2+: Zn2[Fe(CN)6] का श्वेत (नीलाभ-श्वेत) अवक्षेप – जिंक का पुष्टिकारक परीक्षण।
  4. Ba2+ तथा Ca2+ की पहचान ज्वाला परीक्षण/(NH4)2CO3–ऑक्सैलेट परीक्षणों से, NH4+ की नेस्लर अभिकर्मक से तथा Mg2+ की Na2HPO4 से होती है – इनमें K4[Fe(CN)6] प्रयुक्त नहीं होता।
  5. अतः 3 धनायन।

उत्तर: 3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryQualitative analysis – tests of cationsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q150.
Standard entropies of X2, Y2 and XY5 are 70, 50 and 110 J K−1 mol−1 respectively. The temperature in Kelvin at which the reaction 12X2+52Y2⇌XY5, ΔHΘ=−35 kJ mol−1 will be at equilibrium is _______. (Nearest integer)
X2, Y2 तथा XY5 की मानक एन्ट्रॉपियाँ क्रमशः 70, 50 तथा 110 J K−1 mol−1 हैं। वह ताप (केल्विन में) _______ है जिस पर अभिक्रिया 12X2+52Y2⇌XY5, ΔHΘ=−35 kJ mol−1 साम्य में होगी। (निकटतम पूर्णांक)
Show answer

Concept: At equilibrium ΔG° = 0, so T = ΔH°/ΔS°.

  1. ΔSΘ=SΘ(XY5)−[12SΘ(X2)+52SΘ(Y2)]
  2. =110−[12(70)+52(50)]=110−(35+125)=−50 J K−1mol−1.
  3. T=ΔHΘΔSΘ=−35000 J mol−1−50 J K−1mol−1=700 K.

Answer: 700

अवधारणा: साम्य पर ΔG° = 0, अतः T = ΔH°/ΔS°।

  1. ΔSΘ=SΘ(XY5)−[12SΘ(X2)+52SΘ(Y2)]
  2. =110−[12(70)+52(50)]=110−(35+125)=−50 J K−1mol−1।
  3. T=ΔHΘΔSΘ=−35000 J mol−1−50 J K−1mol−1=700 K।

उत्तर: 700

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – equilibrium temperatureJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q151.
Identify the products [A] and [B], respectively in the following reaction :
निम्नलिखित अभिक्रिया में उत्पाद [A] तथा [B] को क्रमशः पहचानिए :
  1. A
  2. B
  3. C
  4. D
Show answer

Concept: Chlorobenzene gives phenol by the Dow process (NaOH, 623 K, 300 atm, then H+); phenol on oxidation with Na2Cr2O7/H2SO4 gives 1,4-benzoquinone.

  1. C6H5Cl + NaOH (623 K, 300 atm) → sodium phenoxide; acidification with H+ gives phenol, so [A] = phenol.
  2. Phenol is easily oxidised: with Na2Cr2O7/H2SO4 it gives the conjugated 1,4-benzoquinone, so [B] = p-benzoquinone.
  3. (A) and (D) show benzene as [A] – the C–Cl bond is replaced by –OH, not by –H; (C) stops at phenoxide and ignores the oxidation step.

Short trick: Phenol + acidified dichromate → p-benzoquinone is a standard NCERT reaction.

Answer: (B)

अवधारणा: क्लोरोबेंज़ीन डाउ प्रक्रम (NaOH, 623 K, 300 atm, फिर H+) द्वारा फ़िनॉल देता है; फ़िनॉल Na2Cr2O7/H2SO4 से ऑक्सीकरण पर 1,4-बेंज़ोक्विनोन देता है।

  1. C6H5Cl + NaOH (623 K, 300 atm) → सोडियम फ़िनॉक्साइड; H+ से अम्लीकरण पर फ़िनॉल बनता है, अतः [A] = फ़िनॉल।
  2. फ़िनॉल आसानी से ऑक्सीकृत होता है: Na2Cr2O7/H2SO4 से संयुग्मित 1,4-बेंज़ोक्विनोन बनता है, अतः [B] = p-बेंज़ोक्विनोन।
  3. (A) व (D) में [A] बेंज़ीन दिखाया गया है – C–Cl बंध –OH से प्रतिस्थापित होता है, –H से नहीं; (C) फ़िनॉक्साइड पर ही रुक जाता है और ऑक्सीकरण चरण छोड़ देता है।

शॉर्ट ट्रिक: फ़िनॉल + अम्लीय डाइक्रोमेट → p-बेंज़ोक्विनोन NCERT की मानक अभिक्रिया है।

उत्तर: (B)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryAlcohols, Phenols & Ethers – preparation and oxidation of phenolJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q152.
Consider the following reactions
K2Cr2O7 →−H2OKOH [A] →−H2OH2SO4 [B] + K2SO4
The products [A] and [B], respectively are :
निम्नलिखित अभिक्रियाओं पर विचार कीजिए
K2Cr2O7 →−H2OKOH [A] →−H2OH2SO4 [B] + K2SO4
उत्पाद [A] तथा [B] क्रमशः हैं :
  1. AK2CrO4 and CrOK2CrO4 तथा CrO
  2. BK2CrO4 and Cr2O3K2CrO4 तथा Cr2O3
  3. CK2CrO4 and K2Cr2O7K2CrO4 तथा K2Cr2O7
  4. DK2Cr(OH)6 and Cr2O3K2Cr(OH)6 तथा Cr2O3
Show answer

Concept: Dichromate and chromate interconvert with pH: OH− gives yellow chromate, H+ gives orange dichromate; Cr stays in +6 state throughout.

  1. K2Cr2O7 + 2KOH → 2K2CrO4 + H2O, so [A] = K2CrO4 (yellow).
  2. 2K2CrO4 + H2SO4 → K2Cr2O7 + K2SO4 + H2O, so [B] = K2Cr2O7 (orange), matching the K2SO4 shown.
  3. CrO, Cr2O3 and K2Cr(OH)6 would need a change of oxidation state, which does not occur here – so the other sets are wrong.

Short trick: Base → chromate (yellow); acid → dichromate (orange). No redox, only condensation/hydrolysis.

Answer: (C)

अवधारणा: डाइक्रोमेट और क्रोमेट pH के साथ परस्पर परिवर्तित होते हैं: OH− से पीला क्रोमेट, H+ से नारंगी डाइक्रोमेट; Cr पूरे समय +6 अवस्था में रहता है।

  1. K2Cr2O7 + 2KOH → 2K2CrO4 + H2O, अतः [A] = K2CrO4 (पीला)।
  2. 2K2CrO4 + H2SO4 → K2Cr2O7 + K2SO4 + H2O, अतः [B] = K2Cr2O7 (नारंगी), जो दिए गए K2SO4 से मेल खाता है।
  3. CrO, Cr2O3 तथा K2Cr(OH)6 के लिए ऑक्सीकरण अवस्था बदलनी पड़ती, जो यहाँ नहीं होता – अतः शेष विकल्प गलत हैं।

शॉर्ट ट्रिक: क्षार → क्रोमेट (पीला); अम्ल → डाइक्रोमेट (नारंगी)। कोई अपचयोपचय नहीं।

उत्तर: (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)Chemistryd- and f-Block – chromate–dichromate interconversionJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q153.
The effect of temperature on spontaneity of reactions are represented as :
ΔHΔSTemperatureSpontaneity
(A)+−any TNon spontaneous
(B)++low Tspontaneous
(C)−−low TNon spontaneous
(D)−+any Tspontaneous
The incorrect combinations are :
अभिक्रियाओं की स्वतःप्रवर्तिता पर ताप के प्रभाव को इस प्रकार दर्शाया गया है :
ΔHΔSतापस्वतःप्रवर्तिता
(A)+−कोई भी Tस्वतःप्रवर्ती नहीं
(B)++निम्न Tस्वतःप्रवर्ती
(C)−−निम्न Tस्वतःप्रवर्ती नहीं
(D)−+कोई भी Tस्वतःप्रवर्ती
गलत संयोजन हैं :
  1. A(B) and (C) onlyकेवल (B) तथा (C)
  2. B(B) and (D) onlyकेवल (B) तथा (D)
  3. C(A) and (D) onlyकेवल (A) तथा (D)
  4. D(A) and (C) onlyकेवल (A) तथा (C)
Show answer

Concept: ΔG=ΔH−TΔS; a process is spontaneous when ΔG<0.

  1. (A) ΔH = +, ΔS = −: ΔG = (+) − T(−) is positive at every temperature → non-spontaneous at any T. Row (A) is correct.
  2. (B) ΔH = +, ΔS = +: ΔG becomes negative only at high T; at low T it is positive (non-spontaneous) → row (B) is incorrect.
  3. (C) ΔH = −, ΔS = −: ΔG is negative at low T, i.e. the reaction is spontaneous at low T → row (C) is incorrect.
  4. (D) ΔH = −, ΔS = +: both terms make ΔG negative at every temperature → spontaneous at any T. Row (D) is correct.
  5. Hence the incorrect combinations are (B) and (C). (B), (C) and (D) each include a correct row ((A) or (D)), so they are wrong.

Short trick: Signs (−, +) → always spontaneous; (+, −) → never; mixed signs → temperature decides (ΔH +, ΔS + needs high T; ΔH −, ΔS − needs low T).

Answer: (A) (B) and (C) only

अवधारणा: ΔG=ΔH−TΔS; प्रक्रम स्वतःप्रवर्ती होता है जब ΔG<0।

  1. (A) ΔH = +, ΔS = −: ΔG = (+) − T(−) प्रत्येक ताप पर धनात्मक → किसी भी T पर स्वतःप्रवर्ती नहीं। पंक्ति (A) सही है।
  2. (B) ΔH = +, ΔS = +: ΔG केवल उच्च T पर ऋणात्मक होता है; निम्न T पर धनात्मक (स्वतःप्रवर्ती नहीं) → पंक्ति (B) गलत है।
  3. (C) ΔH = −, ΔS = −: निम्न T पर ΔG ऋणात्मक है, अर्थात् अभिक्रिया निम्न T पर स्वतःप्रवर्ती है → पंक्ति (C) गलत है।
  4. (D) ΔH = −, ΔS = +: दोनों पद प्रत्येक ताप पर ΔG को ऋणात्मक बनाते हैं → किसी भी T पर स्वतःप्रवर्ती। पंक्ति (D) सही है।
  5. अतः गलत संयोजन (B) तथा (C) हैं। (B), (C) तथा (D) विकल्पों में प्रत्येक में एक सही पंक्ति ((A) या (D)) शामिल है, अतः वे गलत हैं।

शॉर्ट ट्रिक: चिह्न (−, +) → सदैव स्वतःप्रवर्ती; (+, −) → कभी नहीं; मिश्रित चिह्न → ताप निर्णय करता है (ΔH +, ΔS + को उच्च T चाहिए; ΔH −, ΔS − को निम्न T)।

उत्तर: (A) केवल (B) तथा (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – spontaneity and Gibbs energyJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q154.
Which of the following graphs most appropriately represents a zero order reaction ?
निम्नलिखित में से कौन-सा ग्राफ शून्य कोटि अभिक्रिया को सबसे उपयुक्त रूप से दर्शाता है ?
  1. A
  2. B
  3. C
  4. D
Show answer

Concept: For a zero order reaction, rate =k[A]0=k, so [A]=[A]0−kt: the reactant concentration falls linearly with time while the rate stays constant.

  1. (A) shows reactant concentration decreasing as a straight line with time – exactly [A]=[A]0−kt. Correct.
  2. (B) shows the rate decreasing linearly with time – but a zero order rate is constant, so this is wrong.
  3. (C) shows the concentration constant with time – that would mean no reaction at all.
  4. (D) shows rate decaying exponentially – typical of a first order reaction, not zero order.

Short trick: Zero order → [A] vs t is a straight line of slope −k; rate vs t is a horizontal line.

Answer: (A)

अवधारणा: शून्य कोटि अभिक्रिया के लिए दर =k[A]0=k, अतः [A]=[A]0−kt: अभिकारक की सांद्रता समय के साथ रैखिक रूप से घटती है जबकि दर नियत रहती है।

  1. (A) में अभिकारक सांद्रता समय के साथ सरल रेखा में घटती दिखाई गई है – यही [A]=[A]0−kt है। सही।
  2. (B) में दर समय के साथ रैखिक घट रही है – परन्तु शून्य कोटि की दर नियत होती है, अतः गलत।
  3. (C) में सांद्रता समय के साथ नियत है – इसका अर्थ होता कि अभिक्रिया हो ही नहीं रही।
  4. (D) में दर चरघातांकी रूप से घट रही है – यह प्रथम कोटि का लक्षण है, शून्य कोटि का नहीं।

शॉर्ट ट्रिक: शून्य कोटि → [A] बनाम t ढाल −k की सरल रेखा; दर बनाम t क्षैतिज रेखा।

उत्तर: (A)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryChemical Kinetics – zero order reactionJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q155.
Consider the reaction X2Y(g)=X2(g)+12Y2(g) The equation representing correct relationship between the degree of dissociation (x) of X2Y(g) with its equilibrium constant Kp is ______ . Assume x to be very very small.
अभिक्रिया X2Y(g)=X2(g)+12Y2(g) पर विचार कीजिए। X2Y(g) के वियोजन की मात्रा (x) तथा इसके साम्य स्थिरांक Kp के बीच सही संबंध दर्शाने वाला समीकरण ______ है। मान लीजिए x अत्यंत सूक्ष्म है।
  1. Ax=2Kpp3
  2. Bx=2Kp2p3
  3. Cx=Kpp3
  4. Dx=Kp2p3
Show answer

Concept: Write equilibrium moles, convert to partial pressures, apply Kp and use x≪1.

  1. Start with 1 mol X2Y: at equilibrium, moles are (1−x), x, x2; total =1+x2≈1.
  2. Partial pressures (total pressure p): pX2Y≈(1−x)p≈p, pX2≈xp, pY2≈x2p.
  3. Kp=pX2pY21/2pX2Y=xp(xp2)1/2p=x3/2p2.
  4. Squaring: Kp2=x3⋅p2 ⇒ x3=2Kp2p ⇒ x=2Kp2p3.

Short trick: Total Δn of products is 32, so x appears as x3/2 in Kp – squaring must give Kp2 in the final answer.

Answer: (B)

अवधारणा: साम्य पर मोल लिखिए, आंशिक दाबों में बदलिए, Kp लगाइए और x≪1 का उपयोग कीजिए।

  1. 1 मोल X2Y से प्रारम्भ: साम्य पर मोल (1−x), x, x2; कुल =1+x2≈1।
  2. आंशिक दाब (कुल दाब p): pX2Y≈(1−x)p≈p, pX2≈xp, pY2≈x2p।
  3. Kp=pX2pY21/2pX2Y=xp(xp2)1/2p=x3/2p2।
  4. वर्ग करने पर: Kp2=x3⋅p2 ⇒ x3=2Kp2p ⇒ x=2Kp2p3।

शॉर्ट ट्रिक: उत्पादों का कुल Δn 32 है, अतः Kp में x घात 32 में आता है – वर्ग करने पर उत्तर में Kp2 आना ही चाहिए।

उत्तर: (B)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryChemical Equilibrium – Kp and degree of dissociationJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q156.
Given below are two statements : Consider the following reaction

Statement (I) : In the case of formaldehyde (HCHO), K is about 2280, due to small substituents, hydration is faster.
Statement (II) : In the case of trichloro acetaldehyde (CCl3CHO), K is about 2000 due to −I effect of −Cl.
In the light of the above statements, choose the correct answer from the options given below :
नीचे दो कथन दिए गए हैं : निम्नलिखित अभिक्रिया पर विचार कीजिए

कथन (I) : फॉर्मैल्डिहाइड (HCHO) की स्थिति में K लगभग 2280 है, छोटे प्रतिस्थापियों के कारण जलयोजन (hydration) तीव्र होता है।
कथन (II) : ट्राइक्लोरोऐसीटैल्डिहाइड (CCl3CHO) की स्थिति में −Cl के −I प्रभाव के कारण K लगभग 2000 है।
उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :
  1. ABoth Statement I and Statement II are falseकथन I तथा कथन II दोनों असत्य हैं
  2. BStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  3. CStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
  4. DBoth Statement I and Statement II are trueकथन I तथा कथन II दोनों सत्य हैं
Show answer

Concept: The hydration equilibrium constant of a carbonyl compound increases when the carbonyl carbon is more electrophilic and less crowded.

  1. In HCHO the substituents are only two small H atoms: no steric hindrance and no electron-donating alkyl group, so hydration is fast and extensive; K ≈ 2280. Statement I is true.
  2. In CCl3CHO the strong −I effect of the three Cl atoms pulls electron density away, making the carbonyl carbon highly electrophilic; K ≈ 2000 and the stable hydrate (chloral hydrate) is formed. Statement II is true.
  3. Hence both statements are correct.

Short trick: Small substituents (HCHO) or strong −I groups (CCl3) → large hydration K.

Answer: (D)

अवधारणा: कार्बोनिल यौगिक का जलयोजन साम्य स्थिरांक तब बढ़ता है जब कार्बोनिल कार्बन अधिक इलेक्ट्रॉनरागी तथा कम संकुलित हो।

  1. HCHO में प्रतिस्थापी केवल दो छोटे H परमाणु हैं: न त्रिविम बाधा, न इलेक्ट्रॉनदाता ऐल्किल समूह, अतः जलयोजन तीव्र व व्यापक होता है; K ≈ 2280। कथन I सत्य है।
  2. CCl3CHO में तीन Cl परमाणुओं का प्रबल −I प्रभाव इलेक्ट्रॉन घनत्व खींच लेता है, जिससे कार्बोनिल कार्बन अत्यधिक इलेक्ट्रॉनरागी हो जाता है; K ≈ 2000 तथा स्थायी हाइड्रेट (क्लोरल हाइड्रेट) बनता है। कथन II सत्य है।
  3. अतः दोनों कथन सही हैं।

शॉर्ट ट्रिक: छोटे प्रतिस्थापी (HCHO) या प्रबल −I समूह (CCl3) → बड़ा जलयोजन K।

उत्तर: (D)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryAldehydes & Ketones – hydration of carbonyl compoundsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q157.
Given below are two statements :
Statement (I) : For a given shell, the total number of allowed orbitals is given by n2.
Statement (II) : For any subshell, the spatial orientation of the orbitals is given by −l to +l values including zero.
In the light of the above statements, choose the correct answer from the options given below :
नीचे दो कथन दिए गए हैं :
कथन (I) : किसी दिए गए कोश के लिए अनुमत कक्षकों की कुल संख्या n2 द्वारा दी जाती है।
कथन (II) : किसी भी उपकोश के लिए कक्षकों का त्रिविम अभिविन्यास (spatial orientation) शून्य सहित −l से +l मानों द्वारा दिया जाता है।
उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :
  1. ABoth Statement I and Statement II are falseकथन I तथा कथन II दोनों असत्य हैं
  2. BStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  3. CBoth Statement I and Statement II are trueकथन I तथा कथन II दोनों सत्य हैं
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: For shell n, l runs 0 … (n−1) and each subshell has (2l+1) orbitals given by the magnetic quantum number ml.

  1. Total orbitals in a shell =∑l=0n−1(2l+1)=n2 (e.g. n = 2: one s + three p = 4 = 22). Statement I is true.
  2. For a subshell of azimuthal quantum number l, ml takes the values −l, …, 0, …, +l, and ml describes the spatial orientation of the orbitals. Statement II is true.
  3. So both statements are correct.

Short trick: Orbitals per shell = n2; electrons per shell = 2n2; orientations per subshell = 2l+1.

Answer: (C)

अवधारणा: कोश n के लिए l के मान 0 … (n−1) होते हैं तथा प्रत्येक उपकोश में चुंबकीय क्वांटम संख्या ml द्वारा निर्धारित (2l+1) कक्षक होते हैं।

  1. किसी कोश में कुल कक्षक =∑l=0n−1(2l+1)=n2 (जैसे n = 2: एक s + तीन p = 4 = 22)। कथन I सत्य है।
  2. दिगंशी क्वांटम संख्या l वाले उपकोश के लिए ml के मान −l, …, 0, …, +l होते हैं, और ml ही कक्षकों का त्रिविम अभिविन्यास बताता है। कथन II सत्य है।
  3. अतः दोनों कथन सही हैं।

शॉर्ट ट्रिक: प्रति कोश कक्षक = n2; प्रति कोश इलेक्ट्रॉन = 2n2; प्रति उपकोश अभिविन्यास = 2l+1।

उत्तर: (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryAtomic Structure – quantum numbers and orbitalsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q158.
Standard electrode potentials for a few half cells are mentioned below :
ECu2+/Cu∘=0.34 V, EZn2+/Zn∘=−0.76 V
EAg+/Ag∘=0.80 V, EMg2+/Mg∘=−2.37 V
Which one of the following cells gives the most negative value of ΔG∘ ?
कुछ अर्ध-सेलों के मानक इलेक्ट्रोड विभव नीचे दिए गए हैं :
ECu2+/Cu∘=0.34 V, EZn2+/Zn∘=−0.76 V
EAg+/Ag∘=0.80 V, EMg2+/Mg∘=−2.37 V
निम्नलिखित में से कौन-सा सेल ΔG∘ का सबसे अधिक ऋणात्मक मान देता है ?
  1. AZn | Zn2+(1M) || Ag+(1M) | Ag
  2. BZn | Zn2+(1M) || Mg2+(1M) | Mg
  3. CAg | Ag+(1M) || Mg2+(1M) | Mg
  4. DCu | Cu2+(1M) || Ag+(1M) | Ag
Show answer

Concept: ΔG∘=−nFEcell∘ with Ecell∘=Ecathode∘−Eanode∘; the most negative ΔG° corresponds to the largest positive E°cell.

  1. (A) Zn | Zn2+ || Ag+ | Ag: E∘=0.80−(−0.76)=+1.56 V.
  2. (B) Zn | Zn2+ || Mg2+ | Mg: E∘=−2.37−(−0.76)=−1.61 V.
  3. (C) Ag | Ag+ || Mg2+ | Mg: E∘=−2.37−0.80=−3.17 V.
  4. (D) Cu | Cu2+ || Ag+ | Ag: E∘=0.80−0.34=+0.46 V.
  5. The largest positive EMF (+1.56 V) is for the Zn–Ag cell, so it has the most negative ΔG° (for n = 2, ΔG° = −2 × 96500 × 1.56 ≈ −301 kJ).

Short trick: Pick the pair with the greatest gap: lowest E° as anode (Zn among those used as anode) and highest E° as cathode (Ag).

Answer: (A)

अवधारणा: ΔG∘=−nFEcell∘ तथा Ecell∘=Eकैथोड∘−Eऐनोड∘; सबसे ऋणात्मक ΔG° सबसे बड़े धनात्मक E°cell से मिलता है।

  1. (A) Zn | Zn2+ || Ag+ | Ag: E∘=0.80−(−0.76)=+1.56 V।
  2. (B) Zn | Zn2+ || Mg2+ | Mg: E∘=−2.37−(−0.76)=−1.61 V।
  3. (C) Ag | Ag+ || Mg2+ | Mg: E∘=−2.37−0.80=−3.17 V।
  4. (D) Cu | Cu2+ || Ag+ | Ag: E∘=0.80−0.34=+0.46 V।
  5. सबसे बड़ा धनात्मक EMF (+1.56 V) Zn–Ag सेल का है, अतः उसका ΔG° सबसे ऋणात्मक है (n = 2 के लिए ΔG° = −2 × 96500 × 1.56 ≈ −301 kJ)।

शॉर्ट ट्रिक: सबसे बड़ा अंतर चुनिए: न्यूनतम E° ऐनोड (Zn) और अधिकतम E° कैथोड (Ag)।

उत्तर: (A)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryElectrochemistry – cell EMF and ΔG°JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q159.
The α-Helix and β - Pleated sheet structures of protein are associated with its :
प्रोटीन की α-हेलिक्स तथा β-प्लीटेड शीट संरचनाएँ इसकी किस संरचना से संबंधित हैं :
  1. Atertiary structureतृतीयक संरचना
  2. Bquaternary structureचतुर्थक संरचना
  3. Csecondary structureद्वितीयक संरचना
  4. Dprimary structureप्राथमिक संरचना
Show answer

Concept: The secondary structure of a protein is the regular local folding of the polypeptide backbone held by hydrogen bonds between C=O and N–H groups.

  1. α-helix and β-pleated sheet are the two common regular arrangements stabilised by backbone H-bonding – they define the secondary structure.
  2. Primary structure (D) is only the amino-acid sequence; tertiary (A) is the overall 3-D folding of one chain; quaternary (B) is the assembly of more than one polypeptide chain – none of these describes α-helix/β-sheet.

Short trick: Sequence → 1°, helix/sheet → 2°, 3-D fold → 3°, multi-chain → 4°.

Answer: (C)

अवधारणा: प्रोटीन की द्वितीयक संरचना पॉलिपेप्टाइड शृंखला की वह नियमित स्थानीय वलन है जो C=O तथा N–H समूहों के बीच हाइड्रोजन बंधों से स्थायी होती है।

  1. α-हेलिक्स तथा β-प्लीटेड शीट मुख्य शृंखला के H-बंधन से स्थायी दो सामान्य नियमित विन्यास हैं – ये द्वितीयक संरचना को परिभाषित करते हैं।
  2. प्राथमिक संरचना (D) केवल ऐमीनो अम्ल अनुक्रम है; तृतीयक (A) एक शृंखला की समग्र त्रिविम वलन है; चतुर्थक (B) एक से अधिक पॉलिपेप्टाइड शृंखलाओं का संयोजन है – इनमें से कोई α-हेलिक्स/β-शीट का वर्णन नहीं करता।

शॉर्ट ट्रिक: अनुक्रम → 1°, हेलिक्स/शीट → 2°, त्रिविम वलन → 3°, बहु-शृंखला → 4°।

उत्तर: (C)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)ChemistryBiomolecules – structure of proteinsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2
Q160.
Given below are the atomic numbers of some group 14 elements. The atomic number of the element with lowest melting point is :
नीचे वर्ग 14 के कुछ तत्वों के परमाणु क्रमांक दिए गए हैं। न्यूनतम गलनांक वाले तत्व का परमाणु क्रमांक है :
  1. A6
  2. B82
  3. C14
  4. D50
Show answer

Concept: Melting points in group 14 fall from C to Sn as the strong covalent network weakens, but Pb melts higher than Sn because its metallic packing is more efficient.

  1. Approximate melting points: C (Z = 6) ≈ 4373 K, Si (Z = 14) ≈ 1693 K, Ge ≈ 1218 K, Sn (Z = 50) ≈ 505 K, Pb (Z = 82) ≈ 600 K.
  2. The lowest value belongs to tin, Sn, whose atomic number is 50.
  3. (A) C and (C) Si have giant covalent lattices (very high m.p.); (B) Pb melts at about 600 K, higher than Sn.

Short trick: In group 14 the melting-point order is C > Si > Ge > Pb > Sn – tin is the anomaly at the bottom.

Answer: (D)

अवधारणा: वर्ग 14 में गलनांक C से Sn तक घटते हैं क्योंकि प्रबल सहसंयोजक जालक दुर्बल होता जाता है, परन्तु Pb का गलनांक Sn से अधिक होता है क्योंकि इसकी धात्विक संकुलन दक्षता अधिक है।

  1. लगभग गलनांक: C (Z = 6) ≈ 4373 K, Si (Z = 14) ≈ 1693 K, Ge ≈ 1218 K, Sn (Z = 50) ≈ 505 K, Pb (Z = 82) ≈ 600 K।
  2. न्यूनतम मान टिन (Sn) का है, जिसका परमाणु क्रमांक 50 है।
  3. (A) C तथा (C) Si के विशाल सहसंयोजक जालक होते हैं (बहुत उच्च गलनांक); (B) Pb लगभग 600 K पर पिघलता है, जो Sn से अधिक है।

शॉर्ट ट्रिक: वर्ग 14 में गलनांक क्रम C > Si > Ge > Pb > Sn – सबसे नीचे टिन अपवाद है।

उत्तर: (D)

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)Chemistryp-Block – group 14 trends in melting pointJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 23 Jan Shift 2