NEET UG · 2,240 questions

NEET UG 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

560 questions in Physics.

Q461.
Two blocks A and B of masses 3m and m respectively are connected by a massless and inextensible string. The whole system is suspended by a massless spring as shown in figure. The magnitudes of acceleration of A and B immediately after the string is cut, are respectively
द्रव्यमान क्रमशः 3m तथा m के दो गुटके A तथा B एक द्रव्यमानरहित तथा अवितान्य डोरी से जुड़े हैं। पूरा निकाय चित्रानुसार एक द्रव्यमानरहित स्प्रिंग से लटकाया गया है। डोरी काटने के ठीक बाद A तथा B के त्वरणों के परिमाण क्रमशः हैं
  1. Ag,g3
  2. Bg3,g
  3. Cg, g
  4. Dg3,g3
Show answer

Concept: A spring cannot change its extension instantly, so its force stays the same just after the cut; the string tension drops to zero at once.

  1. Before the cut (equilibrium of whole system): kx=(3m+m)g=4mg.
  2. After the cut, A: kx−3mg=3maA⇒aA=4mg−3mg3m=g3 (upward).
  3. B: only gravity acts → aB=g (downward, free fall).

Short trick: Spring force = "memory" of the old load (4mg); A feels the extra mg upward → g/3; B just falls freely.

Answer: (B) g3,g

अवधारणा: स्प्रिंग अपना विस्तार तुरन्त नहीं बदल सकती, अतः काटने के ठीक बाद उसका बल वही रहता है; डोरी का तनाव तुरन्त शून्य हो जाता है।

  1. काटने से पहले (पूरे निकाय का साम्य): kx=(3m+m)g=4mg।
  2. काटने के बाद, A: kx−3mg=3maA⇒aA=4mg−3mg3m=g3 (ऊपर की ओर)।
  3. B: केवल गुरुत्व कार्य करता है → aB=g (नीचे की ओर, मुक्त पतन)।

शॉर्ट ट्रिक: स्प्रिंग बल = पुराने भार (4mg) की "स्मृति"; A पर अतिरिक्त mg ऊपर → g/3; B मुक्त रूप से गिरता है।

उत्तर: (B) g3,g

NEET UGPhysicsLaws of motion – spring force just after cutting stringNEET UG 2017 · 7 May Shift 1
Q462.
Two Polaroids P1 and P2 are placed with their axis perpendicular to each other. Unpolarised light I0 is incident on P1. A third polaroid P3 is kept in between P1 and P2 such that its axis makes an angle 45° with that of P1. The intensity of transmitted light through P2 is
दो पोलेरॉइड P1 तथा P2 इस प्रकार रखे हैं कि उनके अक्ष परस्पर लम्बवत् हैं। P1 पर अध्रुवित प्रकाश I0 आपतित है। एक तीसरा पोलेरॉइड P3, P1 तथा P2 के बीच इस प्रकार रखा है कि इसका अक्ष P1 के अक्ष से 45° का कोण बनाता है। P2 से पारगमित प्रकाश की तीव्रता है
  1. AI02
  2. BI04
  3. CI08
  4. DI016
Show answer

Concept: First polaroid halves unpolarised light; after that Malus' law I=I′cos2⁡θ applies at each polaroid.

  1. After P1: I02
  2. After P3 (45° to P1): I02cos2⁡45∘=I04
  3. After P2 (45° to P3): I04cos2⁡45∘=I08

Short trick: ½ × ½ × ½ = ⅛. (Without P₃ the crossed pair would give zero.)

Answer: (C) I08

अवधारणा: पहला पोलेरॉइड अध्रुवित प्रकाश को आधा कर देता है; उसके बाद प्रत्येक पोलेरॉइड पर मैलस का नियम I=I′cos2⁡θ लगता है।

  1. P1 के बाद: I02
  2. P3 के बाद (P1 से 45°): I02cos2⁡45∘=I04
  3. P2 के बाद (P3 से 45°): I04cos2⁡45∘=I08

शॉर्ट ट्रिक: ½ × ½ × ½ = ⅛। (P₃ के बिना क्रॉस युग्म शून्य देता।)

उत्तर: (C) I08

NEET UGPhysicsWave optics – polarisation, Malus' lawNEET UG 2017 · 7 May Shift 1
Q463.
A long solenoid of diameter 0.1 m has 2 × 104 turns per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0 A from 4 A in 0.05 s. If the resistance of the coil is 10π2 Ω, the total charge flowing through the coil during this time is
0.1 m व्यास की एक लम्बी परिनालिका में प्रति मीटर 2 × 104 फेरे हैं। परिनालिका के केन्द्र पर 100 फेरों तथा 0.01 m त्रिज्या की एक कुण्डली इस प्रकार रखी है कि उसका अक्ष परिनालिका के अक्ष के संपाती है। परिनालिका में धारा 0.05 s में 4 A से नियत दर से घटकर 0 A हो जाती है। यदि कुण्डली का प्रतिरोध 10π2 Ω है, तो इस समय में कुण्डली से प्रवाहित कुल आवेश है
  1. A32π μC
  2. B16 μC
  3. C32 μC
  4. D16π μC
Show answer

Concept: Induced charge depends only on the total flux change: Q=NΔϕR (time 0.05 s is not needed).

  1. Field inside solenoid: B=μ0nI; flux through one turn of the small coil: ϕ=μ0nIπr2.
  2. Δϕ=4π×10−7×2×104×4×π(0.01)2=3.2π2×10−6 Wb
  3. Q=NΔϕR=100×3.2π2×10−610π2=32×10−6 C =32 μC

Short trick: The π² in R is there to cancel π (from μ₀) × π (from area) → answer has no π: only 16 μC or 32 μC can survive.

Answer: (C) 32 μC

अवधारणा: प्रेरित आवेश केवल कुल फ्लक्स परिवर्तन पर निर्भर करता है: Q=NΔϕR (समय 0.05 s की आवश्यकता नहीं)।

  1. परिनालिका के भीतर क्षेत्र: B=μ0nI; छोटी कुण्डली के एक फेरे से फ्लक्स: ϕ=μ0nIπr2।
  2. Δϕ=4π×10−7×2×104×4×π(0.01)2=3.2π2×10−6 Wb
  3. Q=NΔϕR=100×3.2π2×10−610π2=32×10−6 C =32 μC

शॉर्ट ट्रिक: R में π², π (μ₀ से) × π (क्षेत्रफल से) को काटने के लिए है → उत्तर में π नहीं: केवल 16 μC या 32 μC बच सकते हैं।

उत्तर: (C) 32 μC

NEET UGPhysicsElectromagnetic induction – charge flow due to flux changeNEET UG 2017 · 7 May Shift 1
Q464.
Two discs of same moment of inertia rotating about their regular axis passing through centre and perpendicular to the plane of disc with angular velocities ω1 and ω2. They are brought into contact face to face coinciding the axis of rotation. The expression for loss of energy during this process is
समान जड़त्व आघूर्ण वाली दो डिस्क, केन्द्र से गुजरने वाले तथा डिस्क के तल के लम्बवत् अपने नियमित अक्ष के परितः कोणीय वेगों ω1 तथा ω2 से घूर्णन कर रही हैं। इन्हें घूर्णन अक्ष संपाती रखते हुए आमने-सामने संपर्क में लाया जाता है। इस प्रक्रम में ऊर्जा ह्रास का व्यंजक है
  1. A12I(ω1+ω2)2
  2. B14I(ω1−ω2)2
  3. CI(ω1−ω2)2
  4. DI8(ω1−ω2)2
Show answer

Concept: No external torque → angular momentum conserved; the discs end with a common ω (like a perfectly inelastic collision).

  1. Iω1+Iω2=2Iω⇒ω=ω1+ω22
  2. Ki=12I(ω12+ω22), Kf=12(2I)ω2=I4(ω1+ω2)2
  3. ΔK=Ki−Kf=I4(ω1−ω2)2

Short trick: Loss = ½ · (I₁I₂/(I₁+I₂)) · (ω₁ – ω₂)²; with I₁ = I₂ = I, reduced inertia = I/2 → ¼ I(ω₁ – ω₂)². Loss must vanish when ω₁ = ω₂, which rules out (A).

Answer: (B) 14I(ω1−ω2)2

अवधारणा: कोई बाह्य बल-आघूर्ण नहीं → कोणीय संवेग संरक्षित; डिस्कें अंत में एक उभयनिष्ठ ω से घूमती हैं (पूर्णतः अप्रत्यास्थ संघट्ट की तरह)।

  1. Iω1+Iω2=2Iω⇒ω=ω1+ω22
  2. Ki=12I(ω12+ω22), Kf=12(2I)ω2=I4(ω1+ω2)2
  3. ΔK=Ki−Kf=I4(ω1−ω2)2

शॉर्ट ट्रिक: ह्रास = ½ · (I₁I₂/(I₁+I₂)) · (ω₁ – ω₂)²; I₁ = I₂ = I पर समानीत जड़त्व = I/2 → ¼ I(ω₁ – ω₂)²। ω₁ = ω₂ होने पर ह्रास शून्य होना चाहिए, इससे (A) बाहर।

उत्तर: (B) 14I(ω1−ω2)2

NEET UGPhysicsRotational motion – energy loss when discs coupleNEET UG 2017 · 7 May Shift 1
Q465.
Preeti reached the metro station and found that the escalator was not working. She walked up the stationary escalator in time t1. On other days, if she remains stationary on the moving escalator, then the escalator takes her up in time t2. The time taken by her to walk up on the moving escalator will be
प्रीति मेट्रो स्टेशन पहुँची तथा उसने पाया कि एस्केलेटर कार्य नहीं कर रहा था। वह स्थिर एस्केलेटर पर समय t1 में चलकर ऊपर पहुँची। अन्य दिनों में, यदि वह गतिमान एस्केलेटर पर स्थिर खड़ी रहती है, तो एस्केलेटर उसे समय t2 में ऊपर ले जाता है। गतिमान एस्केलेटर पर चलकर ऊपर जाने में उसके द्वारा लिया गया समय होगा
  1. At1+t22
  2. Bt1t2t2−t1
  3. Ct1t2t2+t1
  4. Dt1−t2
Show answer

Concept: Velocities add: v=vwalk+vesc, with vwalk=dt1, vesc=dt2.

  1. dt=dt1+dt2
  2. 1t=1t1+1t2⇒t=t1t2t1+t2

Short trick: Like resistors in parallel: t must be less than both t₁ and t₂ – only (C) always is.

Answer: (C) t1t2t2+t1

अवधारणा: वेग जुड़ते हैं: v=vwalk+vesc, जहाँ vwalk=dt1, vesc=dt2।

  1. dt=dt1+dt2
  2. 1t=1t1+1t2⇒t=t1t2t1+t2

शॉर्ट ट्रिक: समांतर प्रतिरोधों की तरह: t, t₁ तथा t₂ दोनों से कम होना चाहिए – केवल (C) सदैव ऐसा है।

उत्तर: (C) t1t2t2+t1

NEET UGPhysicsMotion in a straight line – relative velocity (escalator)NEET UG 2017 · 7 May Shift 1
Q466.
A rope is wound around a hollow cylinder of mass 3 kg and radius 40 cm. What is the angular acceleration of the cylinder if the rope is pulled with a force of 30 N?
3 kg द्रव्यमान तथा 40 cm त्रिज्या के एक खोखले बेलन पर एक रस्सी लिपटी है। यदि रस्सी को 30 N बल से खींचा जाए, तो बेलन का कोणीय त्वरण क्या है?
  1. A25 m/s2
  2. B0.25 rad/s2
  3. C25 rad/s2
  4. D5 m/s2
Show answer

Concept: τ=Iα with τ=FR and, for a hollow cylinder about its axis, I=MR2.

  1. τ=30×0.4=12 N m
  2. I=3×(0.4)2=0.48 kg m²
  3. α=120.48=25 rad/s²

Short trick: α = F/(MR) = 30/(3 × 0.4) = 25; and angular acceleration must be in rad/s² – (A), (D) have wrong units.

Answer: (C) 25 rad/s2

अवधारणा: τ=Iα जहाँ τ=FR तथा खोखले बेलन के लिए उसके अक्ष के परितः I=MR2।

  1. τ=30×0.4=12 N m
  2. I=3×(0.4)2=0.48 kg m²
  3. α=120.48=25 rad/s²

शॉर्ट ट्रिक: α = F/(MR) = 30/(3 × 0.4) = 25; तथा कोणीय त्वरण rad/s² में होना चाहिए – (A), (D) के मात्रक गलत हैं।

उत्तर: (C) 25 rad/s2

NEET UGPhysicsRotational motion – torque on a hollow cylinderNEET UG 2017 · 7 May Shift 1
Q467.
A beam of light from a source L is incident normally on a plane mirror fixed at a certain distance x from the source. The beam is reflected back as a spot on a scale placed just above the source L. When the mirror is rotated through a small angle θ, the spot of the light is found to move through a distance y on the scale. The angle θ is given by
एक स्रोत L से प्रकाश का एक पुंज, स्रोत से एक निश्चित दूरी x पर स्थिर एक समतल दर्पण पर अभिलम्बवत् आपतित होता है। पुंज परावर्तित होकर स्रोत L के ठीक ऊपर रखे एक पैमाने पर एक धब्बे (spot) के रूप में लौटता है। जब दर्पण को एक छोटे कोण θ से घुमाया जाता है, तो प्रकाश का धब्बा पैमाने पर दूरी y से विस्थापित होता पाया जाता है। कोण θ दिया जाता है
  1. Ay2x
  2. Byx
  3. Cx2y
  4. Dxy
Show answer

Concept: Rotating a mirror by θ (fixed incident ray) rotates the reflected ray by 2θ.

  1. Reflected ray turns by 2θ and travels distance x back to the scale.
  2. Small angle: 2θ≈yx
  3. θ=y2x

Short trick: Mirror θ → ray 2θ; spot shift y = x·2θ.

Answer: (A) y2x

अवधारणा: आपतित किरण स्थिर रहते हुए दर्पण को θ घुमाने पर परावर्तित किरण 2θ घूम जाती है।

  1. परावर्तित किरण 2θ घूमती है तथा पैमाने तक x दूरी तय करती है।
  2. छोटे कोण के लिए: 2θ≈yx
  3. θ=y2x

शॉर्ट ट्रिक: दर्पण θ → किरण 2θ; धब्बे का विस्थापन y = x·2θ।

उत्तर: (A) y2x

NEET UGPhysicsRay optics – rotation of plane mirrorNEET UG 2017 · 7 May Shift 1
Q468.
The two nearest harmonics of a tube closed at one end and open at other end are 220 Hz and 260 Hz. What is the fundamental frequency of the system?
एक सिरे पर बंद तथा दूसरे सिरे पर खुली एक नली के दो निकटतम संनादी 220 Hz तथा 260 Hz हैं। निकाय की मूल आवृत्ति क्या है?
  1. A10 Hz
  2. B20 Hz
  3. C30 Hz
  4. D40 Hz
Show answer

Concept: A closed pipe has only odd harmonics f0,3f0,5f0,…; neighbouring ones differ by 2f0.

  1. 260−220=40=2f0⇒f0=20 Hz
  2. Check: 220 = 11 × 20 and 260 = 13 × 20 – consecutive odd multiples ✓

Short trick: Closed pipe: f₀ = (difference of successive harmonics)/2. 40 Hz (D) would be the open-pipe answer.

Answer: (B) 20 Hz

अवधारणा: बंद पाइप में केवल विषम संनादी f0,3f0,5f0,… होते हैं; निकटवर्ती संनादियों में 2f0 का अंतर होता है।

  1. 260−220=40=2f0⇒f0=20 Hz
  2. जाँच: 220 = 11 × 20 तथा 260 = 13 × 20 – क्रमागत विषम गुणज ✓

शॉर्ट ट्रिक: बंद पाइप: f₀ = (क्रमागत संनादियों का अंतर)/2। 40 Hz (D) खुले पाइप का उत्तर होता।

उत्तर: (B) 20 Hz

NEET UGPhysicsWaves – closed organ pipe harmonicsNEET UG 2017 · 7 May Shift 1
Q469.
A thin prism having refracting angle 10° is made of glass of refractive index 1.42. This prism is combined with another thin prism of glass of refractive index 1.7. This combination produces dispersion without deviation. The refracting angle of second prism should be
10° अपवर्तक कोण वाला एक पतला प्रिज़्म 1.42 अपवर्तनांक वाले काँच से बना है। इस प्रिज़्म को 1.7 अपवर्तनांक वाले काँच के एक अन्य पतले प्रिज़्म के साथ संयोजित किया जाता है। यह संयोजन विचलन रहित वर्ण-विक्षेपण उत्पन्न करता है। दूसरे प्रिज़्म का अपवर्तक कोण होना चाहिए
  1. A4°
  2. B6°
  3. C8°
  4. D10°
Show answer

Concept: Thin prism deviation δ=(μ−1)A; no net deviation → the two deviations are equal and opposite.

  1. (μ1−1)A1=(μ2−1)A2
  2. (1.42−1)×10∘=(1.7−1)A2⇒4.2=0.7A2
  3. A2=6∘

Short trick: Higher-μ prism needs a smaller angle: 10° × 0.42/0.70 = 6°.

Answer: (B) 6°

अवधारणा: पतले प्रिज़्म का विचलन δ=(μ−1)A; कुल विचलन शून्य → दोनों विचलन बराबर तथा विपरीत।

  1. (μ1−1)A1=(μ2−1)A2
  2. (1.42−1)×10∘=(1.7−1)A2⇒4.2=0.7A2
  3. A2=6∘

शॉर्ट ट्रिक: अधिक μ वाले प्रिज़्म को छोटा कोण चाहिए: 10° × 0.42/0.70 = 6°।

उत्तर: (B) 6°

NEET UGPhysicsRay optics – dispersion without deviationNEET UG 2017 · 7 May Shift 1
Q470.
The resistance of a wire is 'R' ohm. If it is melted and stretched to 'n' times its original length, its new resistance will be
एक तार का प्रतिरोध 'R' ओम है। यदि इसे पिघलाकर इसकी मूल लम्बाई के 'n' गुना तक खींचा जाए, तो इसका नया प्रतिरोध होगा
  1. AnR
  2. BRn
  3. Cn2R
  4. DRn2
Show answer

Concept: Volume is constant on recasting: Al = constant, so R=ρlA=ρl2V∝l2.

  1. Length becomes nl, area becomes A/n.
  2. R′=ρ(nl)A/n=n2ρlA=n2R

Short trick: Stretch n times → R × n² (length ×n and area ÷n).

Answer: (C) n2R

अवधारणा: पुनः ढालने पर आयतन नियत रहता है: Al = नियत, अतः R=ρlA=ρl2V∝l2।

  1. लम्बाई nl हो जाती है, क्षेत्रफल A/n।
  2. R′=ρ(nl)A/n=n2ρlA=n2R

शॉर्ट ट्रिक: n गुना खींचने पर → R × n² (लम्बाई ×n तथा क्षेत्रफल ÷n)।

उत्तर: (C) n2R

NEET UGPhysicsCurrent electricity – resistance on stretchingNEET UG 2017 · 7 May Shift 1
Q471.
From a disc of radius R and mass M, a circular hole of diameter R, whose rim passes through the centre is cut. What is the moment of inertia of the remaining part of the disc about a perpendicular axis, passing through the centre?
त्रिज्या R तथा द्रव्यमान M की एक चकती में से R व्यास का एक वृत्ताकार छिद्र काटा जाता है, जिसकी परिधि (रिम) चकती के केंद्र से होकर गुजरती है। केंद्र से गुजरने वाले लंबवत अक्ष के परितः चकती के शेष भाग का जड़त्व आघूर्ण क्या है?
  1. A15MR2/32
  2. B13MR2/32
  3. C11MR2/32
  4. D9MR2/32
Show answer

Concept: Remaining I = I(full disc) − I(removed disc) about the same axis; use the parallel-axis theorem for the removed part.

  1. Mass per area σ=MπR2; removed disc radius R2 → mass m=σπR24=M4.
  2. Its centre is R2 from O: Irem=12m(R2)2+m(R2)2=32⋅M4⋅R24=3MR232.
  3. I=MR22−3MR232=16MR2−3MR232=13MR232.

Short trick: Hole of radius R/2 touching the centre always removes 332MR2 → 16−332=1332.

Answer: (B) 13MR2/32

अवधारणा: शेष I = पूरी चकती का I − हटाई गई चकती का I (उसी अक्ष के परितः); हटाए गए भाग के लिए समांतर अक्ष प्रमेय लगाएँ।

  1. प्रति क्षेत्रफल द्रव्यमान σ=MπR2; हटाई गई चकती की त्रिज्या R2 → द्रव्यमान m=σπR24=M4।
  2. इसका केंद्र O से R2 दूर है: Irem=12m(R2)2+m(R2)2=32⋅M4⋅R24=3MR232।
  3. I=MR22−3MR232=16MR2−3MR232=13MR232।

शॉर्ट ट्रिक: केंद्र को छूने वाला R/2 त्रिज्या का छिद्र सदैव 332MR2 घटाता है → 16−332=1332।

उत्तर: (B) 13MR2/32

NEET UGPhysicsRotational motion – moment of inertia (cut disc)NEET UG 2016 · 1 May Shift 1
Q472.
A square loop ABCD carrying a current i, is placed near and coplanar with a long straight conductor XY carrying a current I, the net force on the loop will be:
धारा i वाहित एक वर्गाकार लूप ABCD को धारा I वाहित एक लंबे सीधे चालक XY के निकट तथा उसी तल में रखा गया है। लूप पर नेट बल होगा:
  1. A2μ0Ii3π
  2. Bμ0Ii2π
  3. C2μ0IiL3π
  4. Dμ0IiL2π
Show answer

Concept: Force on a length L of wire parallel to a long wire: F=μ0IiL2πr (like currents attract). Forces on BC and DA are equal and opposite.

  1. AB at r=L2, current along I → attraction: F1=μ0IiL2π(L/2)=μ0Iiπ (towards XY).
  2. CD at r=3L2, current opposite → repulsion: F2=μ0IiL2π(3L/2)=μ0Ii3π (away).
  3. Fnet=F1−F2=μ0Iiπ(1−13)=2μ0Ii3π, towards the wire.

Short trick: L cancels (force ∝ L/r), so options (C), (D) with extra L are dimensionally wrong; then 1−13=23 → (A).

Answer: (A) 2μ0Ii3π

अवधारणा: लंबे तार के समांतर L लंबाई के तार पर बल: F=μ0IiL2πr (समान दिशा की धाराएँ आकर्षित करती हैं)। BC तथा DA पर बल बराबर व विपरीत होते हैं।

  1. AB दूरी r=L2 पर, धारा I की दिशा में → आकर्षण: F1=μ0IiL2π(L/2)=μ0Iiπ (XY की ओर)।
  2. CD दूरी r=3L2 पर, विपरीत धारा → प्रतिकर्षण: F2=μ0IiL2π(3L/2)=μ0Ii3π (दूर की ओर)।
  3. Fnet=F1−F2=μ0Iiπ(1−13)=2μ0Ii3π, तार की ओर।

शॉर्ट ट्रिक: L कट जाता है (बल ∝ L/r), इसलिए अतिरिक्त L वाले विकल्प (C), (D) विमीय रूप से गलत हैं; फिर 1−13=23 → (A)।

उत्तर: (A) 2μ0Ii3π

NEET UGPhysicsMoving charges – force between current-carrying conductorsNEET UG 2016 · 1 May Shift 1
Q473.
The magnetic susceptibility is negative for:
चुंबकीय प्रवृत्ति (susceptibility) ऋणात्मक होती है:
  1. Adiamagnetic material onlyकेवल प्रतिचुंबकीय पदार्थ के लिए
  2. Bparamagnetic material onlyकेवल अनुचुंबकीय पदार्थ के लिए
  3. Cferromagnetic material onlyकेवल लौहचुंबकीय पदार्थ के लिए
  4. Dparamagnetic and ferromagnetic materialsअनुचुंबकीय तथा लौहचुंबकीय पदार्थों के लिए
Show answer

Concept: χm=MH. Diamagnets get magnetised opposite to the field, so χm is small and negative.

  1. Diamagnetic: −1≤χm<0 (e.g. Bi, Cu, water) → negative.
  2. Paramagnetic: small positive χm → (B) wrong.
  3. Ferromagnetic: large positive χm → (C), (D) wrong.

Short trick: Dia = "against" → only diamagnets have negative susceptibility (and μr < 1).

Answer: (A) diamagnetic material only

अवधारणा: χm=MH। प्रतिचुंबकीय पदार्थ क्षेत्र के विपरीत चुंबकित होते हैं, अतः χm छोटा व ऋणात्मक होता है।

  1. प्रतिचुंबकीय: −1≤χm<0 (जैसे Bi, Cu, जल) → ऋणात्मक।
  2. अनुचुंबकीय: छोटा धनात्मक χm → (B) गलत।
  3. लौहचुंबकीय: बड़ा धनात्मक χm → (C), (D) गलत।

शॉर्ट ट्रिक: Dia = "विरुद्ध" → केवल प्रतिचुंबकीय पदार्थों की प्रवृत्ति ऋणात्मक होती है (और μr < 1)।

उत्तर: (A) केवल प्रतिचुंबकीय पदार्थ के लिए

NEET UGPhysicsMagnetism and matter – magnetic susceptibilityNEET UG 2016 · 1 May Shift 1
Q474.
A siren emitting a sound of frequency 800 Hz moves away from an observer towards a cliff at a speed of 15 m s−1. Then, the frequency of sound that the observer hears in the echo reflected from the cliff is : (Take velocity of sound in air = 330 m s−1)
800 Hz आवृत्ति की ध्वनि उत्सर्जित करने वाला एक सायरन एक प्रेक्षक से दूर, एक चट्टान की ओर 15 m s−1 की चाल से गतिमान है। चट्टान से परावर्तित प्रतिध्वनि में प्रेक्षक द्वारा सुनी गई ध्वनि की आवृत्ति है : (वायु में ध्वनि का वेग = 330 m s−1 लीजिए)
  1. A765 Hz
  2. B800 Hz
  3. C838 Hz
  4. D885 Hz
Show answer

Concept: The cliff receives sound from a source approaching it: f′=fvv−vs. The cliff (at rest) reflects this same frequency to the stationary observer.

  1. Source moves towards the cliff with vs=15 m/s.
  2. f′=800×330330−15=800×330315
  3. f′=838.1≈838 Hz (observer and cliff are at rest, so the echo keeps this frequency).

Short trick: Echo comes from the side the source approaches → frequency must be above 800 Hz; ratio 330/315 ≈ 1.048 → 838 Hz.

Answer: (C) 838 Hz

अवधारणा: चट्टान को निकट आते स्रोत से ध्वनि मिलती है: f′=fvv−vs। स्थिर चट्टान यही आवृत्ति स्थिर प्रेक्षक की ओर परावर्तित करती है।

  1. स्रोत चट्टान की ओर vs=15 m/s से गतिमान है।
  2. f′=800×330330−15=800×330315
  3. f′=838.1≈838 Hz (प्रेक्षक व चट्टान स्थिर हैं, अतः प्रतिध्वनि की आवृत्ति यही रहती है)।

शॉर्ट ट्रिक: प्रतिध्वनि उस ओर से आती है जिधर स्रोत बढ़ रहा है → आवृत्ति 800 Hz से अधिक; अनुपात 330/315 ≈ 1.048 → 838 Hz।

उत्तर: (C) 838 Hz

NEET UGPhysicsWaves – Doppler effect (echo from cliff)NEET UG 2016 · 1 May Shift 1
Q475.

A capacitor of 2 μF is charged as shown in the diagram. When the switch S is turned to position 2, the percentage of its stored energy dissipated is:

आरेख में दर्शाए अनुसार 2 μF के एक संधारित्र को आवेशित किया गया है। जब स्विच S को स्थिति 2 पर घुमाया जाता है, तो इसकी संचित ऊर्जा का कितना प्रतिशत क्षयित होता है?
  1. A0%
  2. B20%
  3. C75%
  4. D80%
Show answer

Concept: When a charged capacitor is joined to an uncharged one, charge is shared (common potential) and energy lost =C1C22(C1+C2)V2.

  1. Initially (position 1): Q=2V μC, Ui=12(2)V2=V2.
  2. Position 2: 2 μF and 8 μF in parallel, common potential Vc=2V2+8=V5.
  3. Uf=12(10)(V5)2=V25.
  4. Dissipated =V2−V25=4V25 → 4/51×100=80%.

Short trick: Fraction lost =C2C1+C2=810=80%.

Answer: (D) 80%

अवधारणा: जब आवेशित संधारित्र को अनावेशित संधारित्र से जोड़ते हैं, तो आवेश बँटता है (उभयनिष्ठ विभव) तथा ऊर्जा हानि =C1C22(C1+C2)V2।

  1. प्रारंभ में (स्थिति 1): Q=2V μC, Ui=12(2)V2=V2।
  2. स्थिति 2: 2 μF तथा 8 μF समांतर में, उभयनिष्ठ विभव Vc=2V2+8=V5।
  3. Uf=12(10)(V5)2=V25।
  4. क्षयित ऊर्जा =V2−V25=4V25 → 4/51×100=80%।

शॉर्ट ट्रिक: हानि का अंश =C2C1+C2=810=80%।

उत्तर: (D) 80%

NEET UGPhysicsCapacitance – energy loss in charge sharingNEET UG 2016 · 1 May Shift 1
Q476.
In a diffraction pattern due to a single slit of width ‘a’, the first minimum is observed at an angle 30∘ when light of wavelength 5000 Å is incident on the slit. The first secondary maximum is observed at an angle of:
चौड़ाई ‘a’ की एकल झिरी के कारण बने विवर्तन पैटर्न में, जब झिरी पर 5000 Å तरंगदैर्ध्य का प्रकाश आपतित होता है, तो प्रथम निम्निष्ठ 30∘ कोण पर प्राप्त होता है। प्रथम द्वितीयक उच्चिष्ठ किस कोण पर प्राप्त होगा?
  1. Asin−1⁡(14)
  2. Bsin−1⁡(23)
  3. Csin−1⁡(12)
  4. Dsin−1⁡(34)
Show answer

Concept: Single slit: minima at asin⁡θ=nλ; secondary maxima approximately at asin⁡θ=(n+12)λ.

  1. First minimum: asin⁡30∘=λ → λa=12.
  2. First secondary maximum: asin⁡θ=3λ2.
  3. sin⁡θ=32⋅λa=32×12=34 → θ=sin−1⁡(34).

Short trick: sin⁡θmax1=1.5×sin⁡θmin1=1.5×0.5=0.75.

Answer: (D) sin−1⁡(34)

अवधारणा: एकल झिरी: निम्निष्ठ asin⁡θ=nλ पर; द्वितीयक उच्चिष्ठ लगभग asin⁡θ=(n+12)λ पर।

  1. प्रथम निम्निष्ठ: asin⁡30∘=λ → λa=12।
  2. प्रथम द्वितीयक उच्चिष्ठ: asin⁡θ=3λ2।
  3. sin⁡θ=32⋅λa=32×12=34 → θ=sin−1⁡(34)।

शॉर्ट ट्रिक: sin⁡θmax1=1.5×sin⁡θmin1=1.5×0.5=0.75।

उत्तर: (D) sin−1⁡(34)

NEET UGPhysicsWave optics – single slit diffractionNEET UG 2016 · 1 May Shift 1
Q477.
At what height from the surface of earth the gravitation potential and the value of g are −5.4×107 J kg−2 and 6.0 m s−2 respectively? Take the radius of earth as 6400 km:
पृथ्वी की सतह से किस ऊँचाई पर गुरुत्वीय विभव तथा g के मान क्रमशः −5.4×107 J kg−2 तथा 6.0 m s−2 हैं? पृथ्वी की त्रिज्या 6400 km लीजिए:
  1. A2600 km
  2. B1600 km
  3. C1400 km
  4. D2000 km
Show answer

Concept: At distance r=R+h from the centre: V=−GMr and g=GMr2, so |V|g=r.

  1. r=|V|g=5.4×1076.0=9×106 m = 9000 km.
  2. h=r−R=9000−6400=2600 km.

Short trick: Divide |V| by g directly → distance from centre; subtract R.

Answer: (A) 2600 km

अवधारणा: केंद्र से दूरी r=R+h पर: V=−GMr तथा g=GMr2, अतः |V|g=r।

  1. r=|V|g=5.4×1076.0=9×106 m = 9000 km।
  2. h=r−R=9000−6400=2600 km।

शॉर्ट ट्रिक: |V| को g से सीधे भाग दें → केंद्र से दूरी; उसमें से R घटाएँ।

उत्तर: (A) 2600 km

NEET UGPhysicsGravitation – potential and g at heightNEET UG 2016 · 1 May Shift 1
Q478.
Out of the following options which one can be used to produce a propagating electromagnetic wave?
निम्नलिखित विकल्पों में से किसका उपयोग संचरित होने वाली विद्युत-चुंबकीय तरंग उत्पन्न करने के लिए किया जा सकता है?
  1. AA charge moving at constant velocityनियत वेग से गतिमान आवेश
  2. BA stationary chargeएक स्थिर आवेश
  3. CA chargeless particleएक आवेशरहित कण
  4. DAn accelerating chargeएक त्वरित आवेश
Show answer

Concept: A changing (time-varying) electric and magnetic field that radiates away needs an accelerated charge.

  1. Stationary charge → only static electric field (B wrong).
  2. Uniform velocity → steady current-like fields, no radiation (A wrong).
  3. Chargeless particle → no field at all (C wrong).
  4. Accelerating / oscillating charge → radiates EM waves.

Short trick: NCERT line: "An accelerated charge produces electromagnetic waves" (e.g. oscillating charges in an antenna).

Answer: (D) An accelerating charge

अवधारणा: दूर तक विकिरित होने वाले परिवर्ती विद्युत तथा चुंबकीय क्षेत्र के लिए त्वरित आवेश आवश्यक है।

  1. स्थिर आवेश → केवल स्थिर विद्युत क्षेत्र (B गलत)।
  2. नियत वेग → स्थायी क्षेत्र, विकिरण नहीं (A गलत)।
  3. आवेशरहित कण → कोई क्षेत्र नहीं (C गलत)।
  4. त्वरित / दोलनशील आवेश → EM तरंगें विकिरित करता है।

शॉर्ट ट्रिक: NCERT पंक्ति: "त्वरित आवेश विद्युत-चुंबकीय तरंगें उत्पन्न करता है" (जैसे ऐंटेना में दोलन करते आवेश)।

उत्तर: (D) एक त्वरित आवेश

NEET UGPhysicsElectromagnetic waves – source of EM wavesNEET UG 2016 · 1 May Shift 1
Q479.
Two identical charged spheres suspended from a common point by two massless strings of lengths l, are initially at a distance d (d<<l) apart because of their mutual repulsion. The charges begin to leak from both the spheres at a constant rate. As a result, the spheres approach each other with a velocity υ. Then υ varies as a function of the distance x between the spheres, as
दो सर्वसम आवेशित गोले एक उभयनिष्ठ बिंदु से l लंबाई की दो द्रव्यमानरहित डोरियों द्वारा लटके हैं तथा परस्पर प्रतिकर्षण के कारण प्रारंभ में d (d<<l) दूरी पर हैं। दोनों गोलों से आवेश एक नियत दर से क्षरित होने लगता है। परिणामस्वरूप गोले वेग υ से एक-दूसरे की ओर आते हैं। तब गोलों के बीच की दूरी x के फलन के रूप में υ किस प्रकार परिवर्तित होता है?
  1. Aυ∝x12
  2. Bυ∝x
  3. Cυ∝x−12
  4. Dυ∝x−1
Show answer

Concept: Equilibrium of each sphere: tan⁡θ=Fmg, and for small angle tan⁡θ≈x/2l. Leak rate dqdt = constant.

  1. kq2x2=mgx2l → q2=mg2lkx3 → q∝x3/2.
  2. Differentiate: dqdt∝32x1/2dxdt=32x1/2υ.
  3. dqdt constant → x1/2υ = constant → υ∝x−1/2.

Short trick: q∝x3/2; constant q˙ means υ∝x1−3/2=x−1/2.

Answer: (C) υ∝x−12

अवधारणा: प्रत्येक गोले का संतुलन: tan⁡θ=Fmg, तथा छोटे कोण के लिए tan⁡θ≈x/2l। क्षरण दर dqdt = नियत।

  1. kq2x2=mgx2l → q2=mg2lkx3 → q∝x3/2।
  2. अवकलन करने पर: dqdt∝32x1/2dxdt=32x1/2υ।
  3. dqdt नियत → x1/2υ = नियत → υ∝x−1/2।

शॉर्ट ट्रिक: q∝x3/2; नियत q˙ का अर्थ υ∝x1−3/2=x−1/2।

उत्तर: (C) υ∝x−12

NEET UGPhysicsElectrostatics – leaking charges on suspended spheresNEET UG 2016 · 1 May Shift 1
Q480.
A uniform rope of length L and mass m1, hangs vertically from a rigid support. A block of mass m2 is attached to the free end of the rope. A transverse pulse of wavelength λ1 is produced at the lower end of the rope. The wavelength of the pulse when it reaches the top of the rope is λ2. The ratio λ2/λ1 is:
लंबाई L तथा द्रव्यमान m1 की एक एकसमान रस्सी एक दृढ़ आधार से ऊर्ध्वाधर लटकी है। रस्सी के मुक्त सिरे से द्रव्यमान m2 का एक गुटका बँधा है। रस्सी के निचले सिरे पर तरंगदैर्ध्य λ1 का एक अनुप्रस्थ स्पंद उत्पन्न किया जाता है। रस्सी के ऊपरी सिरे पर पहुँचने पर स्पंद की तरंगदैर्ध्य λ2 है। अनुपात λ2/λ1 है:
  1. Am1m2
  2. Bm1+m2m2
  3. Cm2m1
  4. Dm1+m2m1
Show answer

Concept: v=Tμ; frequency stays the same along the rope, so λ∝v∝T.

  1. Bottom: tension T1=m2g.
  2. Top: tension T2=(m1+m2)g.
  3. λ2λ1=T2T1=m1+m2m2.

Short trick: Top supports everything → ratio must be > 1 with m2 in the denominator → (B).

Answer: (B) m1+m2m2

अवधारणा: v=Tμ; रस्सी में आवृत्ति समान रहती है, अतः λ∝v∝T।

  1. नीचे: तनाव T1=m2g।
  2. ऊपर: तनाव T2=(m1+m2)g।
  3. λ2λ1=T2T1=m1+m2m2।

शॉर्ट ट्रिक: ऊपरी सिरा सब कुछ सँभालता है → अनुपात > 1 तथा हर में m2 → (B)।

उत्तर: (B) m1+m2m2

NEET UGPhysicsWaves – speed of transverse wave in hanging ropeNEET UG 2016 · 1 May Shift 1