Q481.A refrigerator works between C and C. It is required to remove 600 calories of heat every second in order to keep the temperature of the refrigerated space constant. The power required is: (Take 1 cal = 4.2 Joules)
एक प्रशीतित्र C तथा C के बीच कार्य करता है। प्रशीतित स्थान का ताप नियत बनाए रखने के लिए प्रति सेकंड 600 कैलोरी ऊष्मा निकालना आवश्यक है। आवश्यक शक्ति है: (1 cal = 4.2 जूल लीजिए)
- A2.365 W
- B23.65 W
- C236.5 W
- D2365 W
Show answer
Concept: Ideal (Carnot) refrigerator: .
- K, K → .
- per second J/s.
- W.
Short trick: W.
Answer: (C) 236.5 W
अवधारणा: आदर्श (कार्नो) प्रशीतित्र: ।
- K, K → ।
- प्रति सेकंड J/s।
- W।
शॉर्ट ट्रिक: W।
उत्तर: (C) 236.5 W
NEET UGPhysicsThermodynamics – refrigerator (coefficient of performance)NEET UG 2016 · 1 May Shift 1
Q482.An air column, closed at one end and open at the other, resonates with a tuning fork when the smallest length of the column is 50 cm. The next larger length of the column resonating with the same tuning fork is:
एक सिरे पर बंद तथा दूसरे सिरे पर खुला एक वायु स्तंभ, स्तंभ की न्यूनतम लंबाई 50 cm होने पर एक स्वरित्र के साथ अनुनाद करता है। उसी स्वरित्र के साथ अनुनाद करने वाली स्तंभ की अगली बड़ी लंबाई है:
- A66.7 cm
- B100 cm
- C150 cm
- D200 cm
Show answer
Concept: Closed pipe resonance lengths: (odd multiples).
- cm → cm.
- Next: cm.
Short trick: Closed pipe → lengths in ratio 1 : 3 : 5 → 50 × 3 = 150 cm.
Answer: (C) 150 cm
अवधारणा: बंद नली की अनुनाद लंबाइयाँ: (विषम गुणज)।
- cm → cm।
- अगली: cm।
शॉर्ट ट्रिक: बंद नली → लंबाइयाँ 1 : 3 : 5 के अनुपात में → 50 × 3 = 150 cm।
उत्तर: (C) 150 cm
NEET UGPhysicsWaves – resonance in closed pipeNEET UG 2016 · 1 May Shift 1
Q483.Consider the junction diode as ideal. The value of current flowing through AB is:

संधि डायोड को आदर्श मानिए। AB से प्रवाहित धारा का मान है:

- A0 A
- B A
- C A
- D A
Show answer
Concept: An ideal diode has zero resistance when forward biased (p-side at higher potential).
- Diode arrow points from A (+4 V) towards B (−6 V) → p-side at higher potential → forward biased, acts as a plain wire.
- V across 1 kΩ.
- A.
Short trick: Arrow of the diode points "downhill" in potential → conducts; I = ΔV/R = 10 V / 1 kΩ = 10 mA.
Answer: (B) A
अवधारणा: अग्र अभिनत (p-सिरा उच्च विभव पर) होने पर आदर्श डायोड का प्रतिरोध शून्य होता है।
- डायोड का तीर A (+4 V) से B (−6 V) की ओर है → p-सिरा उच्च विभव पर → अग्र अभिनत, साधारण तार की तरह कार्य करता है।
- 1 kΩ के सिरों पर V।
- A।
शॉर्ट ट्रिक: डायोड का तीर विभव के "ढलान" की ओर → चालन; I = ΔV/R = 10 V / 1 kΩ = 10 mA।
उत्तर: (B) A
NEET UGPhysicsSemiconductors – ideal diode in a circuitNEET UG 2016 · 1 May Shift 1
Q484.The charge flowing through a resistance R varies with time t as where a and b are positive constants. The total heat produced in R is :
एक प्रतिरोध R से प्रवाहित आवेश समय t के साथ के अनुसार परिवर्तित होता है, जहाँ a तथा b धनात्मक नियतांक हैं। R में उत्पन्न कुल ऊष्मा है :
- A
- B
- C
- D
Show answer
Concept: and heat . Charge flows only while Q keeps increasing, i.e. until .
- ; current becomes zero at (Q is then maximum and the flow stops).
- .
Short trick: i falls linearly from a to 0 in time : of a straight line = → .
Answer: (A)
अवधारणा: तथा ऊष्मा । आवेश तभी तक प्रवाहित होता है जब तक Q बढ़ता रहता है, अर्थात् होने तक।
- ; पर धारा शून्य हो जाती है (तब Q अधिकतम होता है और प्रवाह रुक जाता है)।
- ।
शॉर्ट ट्रिक: i, समय में a से 0 तक रैखिक घटती है: सरल रेखा का → ।
उत्तर: (A)
NEET UGPhysicsCurrent electricity – Joule heating with time-varying chargeNEET UG 2016 · 1 May Shift 1
Q485.A black body is at a temperature of 5760 K. The energy of radiation emitted by the body at wavelength 250 nm is , at wavelength 500 nm is and that at 1000 nm is . Wien’s constant, nmK. Which of the following is correct?
एक कृष्णिका 5760 K ताप पर है। कृष्णिका द्वारा 250 nm तरंगदैर्ध्य पर उत्सर्जित विकिरण की ऊर्जा , 500 nm पर तथा 1000 nm पर है। वीन नियतांक nmK है। निम्नलिखित में से कौन-सा सही है?
- A
- B
- C
- D
Show answer
Concept: Wien's law: ; emitted energy is maximum at and smaller on both sides (never zero).

- nm → is the peak.
- 250 nm and 1000 nm lie on either side of the peak → and → (D) correct, (C) wrong.
- A black body emits at all wavelengths, so , → (A), (B) wrong.
Short trick: Compute first: it equals one of the given wavelengths (500 nm) → that U is the largest.
Answer: (D)
अवधारणा: वीन नियम: ; उत्सर्जित ऊर्जा पर अधिकतम तथा दोनों ओर कम होती है (कभी शून्य नहीं)।

- nm → शिखर है।
- 250 nm तथा 1000 nm शिखर के दोनों ओर हैं → तथा → (D) सही, (C) गलत।
- कृष्णिका सभी तरंगदैर्ध्यों पर उत्सर्जन करती है, अतः , → (A), (B) गलत।
शॉर्ट ट्रिक: पहले निकालें: यह दी गई तरंगदैर्ध्यों में से एक (500 nm) है → वही U सबसे बड़ा।
उत्तर: (D)
NEET UGPhysicsThermal radiation – Wien's displacement lawNEET UG 2016 · 1 May Shift 1
Q486.Coefficient of linear expansion of brass and steel rods are and . Lengths of brass and steel rods are and respectively. If is maintained same at all temperatures, which one of the following relations holds good?
पीतल तथा इस्पात की छड़ों के रैखिक प्रसार गुणांक तथा हैं। पीतल तथा इस्पात की छड़ों की लंबाइयाँ क्रमशः तथा हैं। यदि सभी तापों पर समान बना रहता है, तो निम्नलिखित में से कौन-सा संबंध सही है?
- A
- B
- C
- D
Show answer
Concept: . A constant difference means both rods expand by the same amount.
- → .
- → .
Short trick: Equal expansion ⇒ product same for both rods (each α with its own l).
Answer: (D)
अवधारणा: । नियत अंतर का अर्थ है कि दोनों छड़ें समान मात्रा में फैलती हैं।
- → ।
- → ।
शॉर्ट ट्रिक: समान प्रसार ⇒ दोनों छड़ों के लिए गुणनफल समान (प्रत्येक α अपनी l के साथ)।
उत्तर: (D)
NEET UGPhysicsThermal expansion – constant length differenceNEET UG 2016 · 1 May Shift 1
Q487.A npn transistor is connected in common emitter configuration in a given amplifier. A load resistance of 800 Ω is connected in the collector circuit and the voltage drop across it is 0.8 V. If the current amplification factor is 0.96 and the input resistance of the circuit is 192 Ω, the voltage gain and the power gain of the amplifier will respectively be:
एक प्रवर्धक में एक npn ट्रांजिस्टर उभयनिष्ठ उत्सर्जक विन्यास में जुड़ा है। संग्राहक परिपथ में 800 Ω का एक लोड प्रतिरोध जुड़ा है तथा इसके सिरों पर वोल्टता पात 0.8 V है। यदि धारा प्रवर्धन गुणांक 0.96 है तथा परिपथ का निवेश प्रतिरोध 192 Ω है, तो प्रवर्धक की वोल्टता लब्धि तथा शक्ति लब्धि क्रमशः होंगी:
- A4, 3.84
- B3.69, 3.84
- C4, 4
- D4, 3.69
Show answer
Concept: Voltage gain ; power gain (using the given current gain 0.96).
- .
- Power gain .
Short trick: 800/192 = 25/6; × 0.96 = 4 exactly; power gain = current gain × voltage gain.
Answer: (A) 4, 3.84
अवधारणा: वोल्टता लब्धि ; शक्ति लब्धि (दी गई धारा लब्धि 0.96 लेकर)।
- ।
- शक्ति लब्धि ।
शॉर्ट ट्रिक: 800/192 = 25/6; × 0.96 = ठीक 4; शक्ति लब्धि = धारा लब्धि × वोल्टता लब्धि।
उत्तर: (A) 4, 3.84
NEET UGPhysicsSemiconductors – CE transistor amplifier gainsNEET UG 2016 · 1 May Shift 1
Q488.The intensity at the maximum in a Young’s double slit experiment is . Distance between two slits is , where λ is the wavelength of light used in the experiment. What will be the intensity in front of one of the slits on the screen placed at a distance ?
यंग के द्वि-झिरी प्रयोग में उच्चिष्ठ पर तीव्रता है। दोनों झिरियों के बीच की दूरी है, जहाँ λ प्रयोग में प्रयुक्त प्रकाश की तरंगदैर्ध्य है। दूरी पर रखे पर्दे पर किसी एक झिरी के ठीक सामने तीव्रता क्या होगी?
- A
- B
- C
- D
Show answer
Concept: Path difference at height y: ; intensity with .
- In front of a slit: → .
- .
- .
Short trick: Path difference λ/4 ↔ phase π/2 ↔ intensity exactly half of maximum.
Answer: (D)
अवधारणा: ऊँचाई y पर पथांतर: ; तीव्रता , जहाँ ।
- झिरी के सामने: → ।
- ।
- ।
शॉर्ट ट्रिक: पथांतर λ/4 ↔ कलांतर π/2 ↔ तीव्रता ठीक अधिकतम की आधी।
उत्तर: (D)
NEET UGPhysicsWave optics – Young's double slit intensityNEET UG 2016 · 1 May Shift 1
Q489.A uniform circular disc of radius 50 cm at rest is free to turn about an axis which is perpendicular to its plane and passes through its centre. It is subjected to a torque which produces a constant angular acceleration of 2.0 . Its net acceleration in at the end of 2.0 s is approximately:
50 cm त्रिज्या की एक विरामावस्था में स्थित एकसमान वृत्ताकार चकती, अपने तल के लंबवत तथा केंद्र से गुजरने वाले अक्ष के परितः घूमने के लिए स्वतंत्र है। इस पर एक बल-आघूर्ण लगाया जाता है जो 2.0 का नियत कोणीय त्वरण उत्पन्न करता है। 2.0 s के अंत में इसका कुल त्वरण में लगभग है:
- A8.0
- B7.0
- C6.0
- D3.0
Show answer
Concept: A rim point has tangential and centripetal ; net .
- rad/s.
- ; .
- .
Short trick: Centripetal part dominates (8 vs 1), so net ≈ 8.
Answer: (A) 8.0
अवधारणा: परिधि के बिंदु का स्पर्शरेखीय त्वरण तथा अभिकेंद्र त्वरण ; कुल ।
- rad/s।
- ; ।
- ।
शॉर्ट ट्रिक: अभिकेंद्र भाग प्रभावी है (8 बनाम 1), अतः कुल ≈ 8।
उत्तर: (A) 8.0
NEET UGPhysicsRotational motion – net acceleration of a point on a discNEET UG 2016 · 1 May Shift 1
Q490.An electron of mass m and a photon have same energy E. The ratio of de-Broglie wavelengths associated with them is: (c being velocity of light)
द्रव्यमान m के एक इलेक्ट्रॉन तथा एक फोटॉन की ऊर्जा समान E है। इनसे संबद्ध दे-ब्रॉग्ली तरंगदैर्ध्यों का अनुपात है: (c प्रकाश का वेग है)
- A
- B
- C
- D
Show answer
Concept: . Electron: . Photon: .
- ; .
- .
Short trick: Ratio must be dimensionless: is a speed, so divide by c → only (A) works.
Answer: (A)
अवधारणा: । इलेक्ट्रॉन: । फोटॉन: ।
- ; ।
- ।
शॉर्ट ट्रिक: अनुपात विमाहीन होना चाहिए: एक चाल है, अतः c से भाग → केवल (A) सही बैठता है।
उत्तर: (A)
NEET UGPhysicsDual nature – de Broglie wavelength of electron and photonNEET UG 2016 · 1 May Shift 1
Q491.A disk and a sphere of same radius but different masses roll off on two inclined planes of the same altitude and length. Which one of the two objects gets to the bottom of the plane first?
समान त्रिज्या परंतु भिन्न द्रव्यमानों की एक चकती तथा एक गोला, समान ऊँचाई तथा लंबाई के दो आनत तलों पर लुढ़कते हैं। दोनों में से कौन-सी वस्तु तल के निचले सिरे पर पहले पहुँचती है?
- ADiskचकती
- BSphereगोला
- CBoth reach at the same timeदोनों एक साथ पहुँचते हैं
- DDepends on their massesउनके द्रव्यमानों पर निर्भर करता है
Show answer
Concept: Rolling without slipping: – independent of mass and radius.
- Solid sphere: → .
- Disc: → .
- Larger acceleration on the same length → sphere reaches first; mass does not matter, so (C), (D) are wrong.
Short trick: Smaller k²/R² wins the race: sphere (0.4) < disc (0.5) < ring (1).
Answer: (B) Sphere
अवधारणा: बिना फिसले लोटनिक गति: – द्रव्यमान तथा त्रिज्या पर निर्भर नहीं।
- ठोस गोला: → ।
- चकती: → ।
- समान लंबाई पर अधिक त्वरण → गोला पहले पहुँचता है; द्रव्यमान का कोई प्रभाव नहीं, अतः (C), (D) गलत।
शॉर्ट ट्रिक: जिसका k²/R² कम, वही दौड़ जीतता है: गोला (0.4) < चकती (0.5) < वलय (1)।
उत्तर: (B) गोला
NEET UGPhysicsRotational motion – rolling on an inclineNEET UG 2016 · 1 May Shift 1
Q492.The angle of incidence for a ray of light at a refracting surface of a prism is . The angle of prism is . If the ray suffers minimum deviation through the prism, the angle of minimum deviation and refractive index of the material of the prism respectively, are:
किसी प्रिज़्म के एक अपवर्तक पृष्ठ पर प्रकाश किरण का आपतन कोण है। प्रिज़्म कोण है। यदि किरण प्रिज़्म से न्यूनतम विचलन प्राप्त करती है, तो न्यूनतम विचलन कोण तथा प्रिज़्म के पदार्थ का अपवर्तनांक क्रमशः हैं:
- A;
- B;
- C;
- D;
Show answer
Concept: At minimum deviation , so and .
- .
- .
Short trick: μ of a real prism must exceed 1 → (A), (D) out; → (B).
Answer: (B) ;
अवधारणा: न्यूनतम विचलन पर , अतः तथा ।
- ।
- ।
शॉर्ट ट्रिक: वास्तविक प्रिज़्म का μ, 1 से अधिक होना चाहिए → (A), (D) बाहर; → (B)।
उत्तर: (B) ;
NEET UGPhysicsRay optics – prism at minimum deviationNEET UG 2016 · 1 May Shift 1
Q493.When an α-particle of mass ‘m’ moving with velocity ‘v’ bombards on a heavy nucleus of charge ‘Ze’, its distance of closest approach from the nucleus depends on m as:
जब वेग ‘v’ से गतिमान द्रव्यमान ‘m’ का एक α-कण आवेश ‘Ze’ के एक भारी नाभिक पर बमबारी करता है, तो नाभिक से इसकी निकटतम पहुँच की दूरी m पर किस प्रकार निर्भर करती है?
- A
- B
- C
- D
Show answer
Concept: At closest approach (head-on) all KE becomes electrostatic PE.
- .
- → (v fixed).
Short trick: and KE ∝ m at fixed v → .
Answer: (A)
अवधारणा: निकटतम पहुँच (सीधी टक्कर) पर संपूर्ण गतिज ऊर्जा स्थिरवैद्युत स्थितिज ऊर्जा में बदल जाती है।
- ।
- → (v नियत)।
शॉर्ट ट्रिक: तथा नियत v पर KE ∝ m → ।
उत्तर: (A)
NEET UGPhysicsAtoms – distance of closest approachNEET UG 2016 · 1 May Shift 1
Q494.A particle of mass 10 g moves along a circle of radius 6.4 cm with a constant tangential acceleration. What is the magnitude of this acceleration if the kinetic energy of the particle becomes equal to J by the end of the second revolution after the beginning of the motion?
10 g द्रव्यमान का एक कण 6.4 cm त्रिज्या के वृत्त पर नियत स्पर्शरेखीय त्वरण से गति करता है। यदि गति प्रारंभ होने के बाद दूसरे परिक्रमण के अंत तक कण की गतिज ऊर्जा J हो जाती है, तो इस त्वरण का परिमाण क्या है?
- A
- B
- C
- D
Show answer
Concept: Along the path, constant tangential acceleration gives ; KE .
- Distance in two revolutions: m.
- .
Short trick: KE = work done by tangential force = → .
Answer: (A)
अवधारणा: पथ के अनुदिश नियत स्पर्शरेखीय त्वरण से ; गतिज ऊर्जा ।
- दो परिक्रमणों में दूरी: m।
- ।
शॉर्ट ट्रिक: गतिज ऊर्जा = स्पर्शरेखीय बल द्वारा किया गया कार्य = → ।
उत्तर: (A)
NEET UGPhysicsCircular motion – tangential acceleration from kinetic energyNEET UG 2016 · 1 May Shift 1
Q495.The molecules of a given mass of a gas have r.m.s velocity of 200 at C and pressure. When the temperature and pressure of the gas are respectively, C and , the r.m.s. velocity of its molecules in is:
किसी गैस के दिए गए द्रव्यमान के अणुओं का C तथा दाब पर वर्ग-माध्य-मूल वेग 200 है। जब गैस का ताप तथा दाब क्रमशः C तथा हों, तो इसके अणुओं का वर्ग-माध्य-मूल वेग ( में) है:
- A
- B
- C
- D
Show answer
Concept: depends only on temperature (for a given gas), not on pressure.
- .
- .
Short trick: Ignore the pressure data – it is a distractor; only T (in kelvin) matters.
Answer: (B)
अवधारणा: (दी गई गैस के लिए) केवल ताप पर निर्भर करता है, दाब पर नहीं।
- ।
- ।
शॉर्ट ट्रिक: दाब के आँकड़े भ्रमित करने के लिए हैं – केवल T (केल्विन में) मायने रखता है।
उत्तर: (B)
NEET UGPhysicsKinetic theory – rms speedNEET UG 2016 · 1 May Shift 1
Q496.A long straight wire of radius a carries a steady current I. The current is uniformly distributed over its cross-section. The ratio of the magnetic fields B and B′, at radial distances and 2a respectively, from the axis of the wire is:
त्रिज्या a का एक लंबा सीधा तार स्थायी धारा I वहन करता है। धारा इसके अनुप्रस्थ काट पर एकसमान रूप से वितरित है। तार के अक्ष से क्रमशः तथा 2a त्रिज्यीय दूरियों पर चुंबकीय क्षेत्रों B तथा B′ का अनुपात है:
- A
- B
- C1
- D4
Show answer
Concept: Inside: (∝ r). Outside: (∝ 1/r).
- At : .
- At : .
- .
Short trick: Field at surface : at a/2 it is (linear), at 2a it is (inverse) → equal.
Answer: (C) 1
अवधारणा: अंदर: (∝ r)। बाहर: (∝ 1/r)।
- पर: ।
- पर: ।
- ।
शॉर्ट ट्रिक: सतह पर क्षेत्र : a/2 पर (रैखिक), 2a पर (व्युत्क्रम) → बराबर।
उत्तर: (C) 1
NEET UGPhysicsMoving charges – Ampere's law for a thick wireNEET UG 2016 · 1 May Shift 1
Q497.A particle moves so that its position vector is given by . Where ω is a constant. Which of the following is true?
एक कण इस प्रकार गति करता है कि इसका स्थिति सदिश है, जहाँ ω एक नियतांक है। निम्नलिखित में से कौन-सा सत्य है?
- AVelocity and acceleration both are perpendicular to .वेग तथा त्वरण दोनों के लंबवत हैं।
- BVelocity and acceleration both are parallel to .वेग तथा त्वरण दोनों के समांतर हैं।
- CVelocity is perpendicular to and acceleration is directed towards the origin.वेग के लंबवत है तथा त्वरण मूलबिंदु की ओर निर्दिष्ट है।
- DVelocity is perpendicular to and acceleration is directed away from the origin.वेग के लंबवत है तथा त्वरण मूलबिंदु से दूर की ओर निर्दिष्ट है।
Show answer
Concept: always → uniform circular motion about the origin.
- ; → .
- → towards the origin.
- So (A), (B) fail (a is antiparallel to r), (D) fails (a is not away from O).
Short trick: Uniform circular motion: v tangential, a centripetal ().
Answer: (C) Velocity ⊥ r, acceleration towards origin
अवधारणा: सदैव → मूलबिंदु के परितः एकसमान वृत्तीय गति।
- ; → ।
- → मूलबिंदु की ओर।
- अतः (A), (B) गलत (a, r के प्रतिसमांतर है), (D) गलत (a, O से दूर नहीं है)।
शॉर्ट ट्रिक: एकसमान वृत्तीय गति: v स्पर्शरेखीय, a अभिकेंद्र ()।
उत्तर: (C) वेग ⊥ r, त्वरण मूलबिंदु की ओर
NEET UGPhysicsMotion in a plane – uniform circular motion vectorsNEET UG 2016 · 1 May Shift 1
Q498.What is the minimum velocity with which a body of mass m must enter a vertical loop of radius R so that it can complete the loop?
द्रव्यमान m की एक वस्तु को त्रिज्या R के एक ऊर्ध्वाधर लूप में किस न्यूनतम वेग से प्रवेश करना चाहिए ताकि वह लूप पूरा कर सके?
- A
- B
- C
- D
Show answer
Concept: At the top the minimum speed is (gravity alone gives the centripetal force); energy conservation links top and bottom.
- Top: → .
- → .
- .
Short trick: Remember the pair: top , bottom (string/loop).
Answer: (D)
अवधारणा: शीर्ष पर न्यूनतम चाल है (केवल गुरुत्व अभिकेंद्र बल देता है); ऊर्जा संरक्षण शीर्ष व तली को जोड़ता है।
- शीर्ष: → ।
- → ।
- ।
शॉर्ट ट्रिक: जोड़ी याद रखें: शीर्ष , तली (डोरी/लूप)।
उत्तर: (D)
NEET UGPhysicsWork, energy – vertical loopNEET UG 2016 · 1 May Shift 1
Q499.When a metallic surface is illuminated with radiation of wavelength λ, the stopping potential is V. If the same surface is illuminated with radiation of wavelength 2λ, the stopping potential is . The threshold wavelength for the metallic surface is:
जब किसी धात्विक पृष्ठ को तरंगदैर्ध्य λ के विकिरण से प्रदीप्त किया जाता है, तो निरोधी विभव V है। यदि उसी पृष्ठ को तरंगदैर्ध्य 2λ के विकिरण से प्रदीप्त किया जाए, तो निरोधी विभव है। धात्विक पृष्ठ की देहली तरंगदैर्ध्य है:
- A
- B
- C
- D
Show answer
Concept: Einstein: , with .
- … (i); … (ii).
- (i) = 4 × (ii): → .
- → .
Short trick: Write unit: → → .
Answer: (D)
अवधारणा: आइंस्टीन समीकरण: , जहाँ ।
- … (i); … (ii)।
- (i) = 4 × (ii): → ।
- → ।
शॉर्ट ट्रिक: इकाई लें: → → ।
उत्तर: (D)
NEET UGPhysicsDual nature – photoelectric effect, threshold wavelengthNEET UG 2016 · 1 May Shift 1
Q500.A gas is compressed isothermally to half its initial volume. The same gas is compressed separately through an adiabatic process until its volume is again reduced to half. Then:
एक गैस को समतापीय रूप से उसके प्रारंभिक आयतन के आधे तक संपीडित किया जाता है। उसी गैस को अलग से एक रुद्धोष्म प्रक्रम द्वारा तब तक संपीडित किया जाता है जब तक उसका आयतन पुनः आधा न हो जाए। तब:
- ACompressing the gas isothermally will require more work to be done.गैस को समतापीय रूप से संपीडित करने में अधिक कार्य करना होगा।
- BCompressing the gas through adiabatic process will require more work to be done.गैस को रुद्धोष्म प्रक्रम द्वारा संपीडित करने में अधिक कार्य करना होगा।
- CCompressing the gas isothermally or adiabatically will require the same amount of work.गैस को समतापीय या रुद्धोष्म रूप से संपीडित करने में समान कार्य करना होगा।
- DWhich of the case (whether compression through isothermal or through adiabatic process) requires more work will depend upon the atomicity of the gas.किस स्थिति में (समतापी या रुद्धोष्म संपीडन) अधिक कार्य करना होगा, यह गैस की परमाणुकता पर निर्भर करेगा।
Show answer
Concept: Work done on the gas = area under the P–V curve. On compression an adiabatic curve rises more steeply than an isothermal one from the same start.

- Isothermal: = const → at V/2, P doubles.
- Adiabatic: = const → at V/2, P becomes (γ > 1 for every gas).
- Adiabatic curve lies above the isothermal throughout → larger area → more work. Since γ > 1 for all gases, the result does not depend on atomicity (D wrong).
Short trick: In adiabatic compression the gas also heats up, so pressure climbs faster → more work.
Answer: (B) Adiabatic compression needs more work
अवधारणा: गैस पर किया गया कार्य = P–V वक्र के नीचे का क्षेत्रफल। संपीडन में, समान प्रारंभिक बिंदु से रुद्धोष्म वक्र समतापी वक्र से अधिक तीव्रता से ऊपर उठता है।

- समतापी: = नियत → V/2 पर P दुगुना।
- रुद्धोष्म: = नियत → V/2 पर P = (प्रत्येक गैस के लिए γ > 1)।
- रुद्धोष्म वक्र पूरे परास में समतापी से ऊपर है → अधिक क्षेत्रफल → अधिक कार्य। सभी गैसों के लिए γ > 1, अतः परिणाम परमाणुकता पर निर्भर नहीं (D गलत)।
शॉर्ट ट्रिक: रुद्धोष्म संपीडन में गैस गर्म भी होती है, अतः दाब तेज़ी से बढ़ता है → अधिक कार्य।
उत्तर: (B) रुद्धोष्म संपीडन में अधिक कार्य
NEET UGPhysicsThermodynamics – isothermal vs adiabatic compression workNEET UG 2016 · 1 May Shift 1