Q81.Which of the following methods is commonly used to extract metals low in the activity series, such as mercury and copper, from their ores?
सक्रियता श्रेणी में निचले स्थान पर स्थित धातुओं, जैसे पारा और ताँबा, को उनके अयस्कों से निष्कर्षित करने के लिए सामान्यतः निम्नलिखित में से कौन-सी विधि उपयोग की जाती है?
- ADisplacement by carbon monoxide gasकार्बन मोनोऑक्साइड गैस द्वारा विस्थापन
- BReduction with aluminium powderऐलुमिनियम चूर्ण द्वारा अपचयन
- CRoastingभर्जन (Roasting)
- DElectrolysis of molten oreगलित अयस्क का विद्युत-अपघटन
Show answer
Concept: Metals low in the activity series are obtained just by heating (roasting) their sulphide ores in air.
- Cinnabar: 2HgS + 3O₂ → 2HgO + 2SO₂ (roasting); 2HgO → 2Hg + O₂ on further heating
- Copper: 2Cu₂S + 3O₂ → 2Cu₂O + 2SO₂; then Cu₂S + 2Cu₂O → 6Cu + SO₂
- Electrolysis is needed only for highly reactive metals like Na, Al
Yaad rakhein: Low reactivity → heat alone; middle (Zn, Fe) → reduction with C; top (Na, K, Al) → electrolysis.
Answer: (C) Roasting
अवधारणा: कम सक्रिय धातुएँ उनके सल्फाइड अयस्क को हवा में गर्म (भर्जन) करने से ही मिल जाती हैं।
- सिनेबार: 2HgS + 3O₂ → 2HgO + 2SO₂; गर्म करने पर 2HgO → 2Hg + O₂
- कॉपर: Cu₂S का भर्जन → Cu₂O; फिर Cu₂S + 2Cu₂O → 6Cu + SO₂
- विद्युत-अपघटन केवल Na, Al जैसी अधिक सक्रिय धातुओं के लिए
याद रखें: कम सक्रिय → केवल ताप; मध्यम (Zn, Fe) → कार्बन से अपचयन; अधिक सक्रिय → विद्युत-अपघटन।
उत्तर: (C) भर्जन (Roasting)
RRB Technician Grade IIIGeneral ScienceExtraction of metals low in reactivity seriesRRB Technician Grade III 2025 · 10 Mar Shift 1
Q82.Which characteristic best describes parenchyma?
मृदूतक (parenchyma) का सबसे उपयुक्त वर्णन कौन-सा लक्षण करता है?
- ACells arranged in a single layer with guarding function.रक्षात्मक कार्य वाली एकल परत में व्यवस्थित कोशिकाएँ।
- BLiving cells with thin walls, capable of division in young tissues.पतली भित्ति वाली सजीव कोशिकाएँ, जो नए ऊतकों में विभाजन में सक्षम होती हैं।
- CRigid cells that withstand bending.दृढ़ कोशिकाएँ जो मुड़ने का प्रतिरोध करती हैं।
- DDead at maturity with thick secondary walls.परिपक्व होने पर मृत, मोटी द्वितीयक भित्ति वाली कोशिकाएँ।
Show answer
Concept: Parenchyma is the simple permanent tissue made of living, thin-walled cells.
- Cells are living, thin-walled, loosely packed with intercellular spaces
- Young parenchyma cells can divide; they store food and help in repair
- Rigid bending-resistant cells = collenchyma; dead thick-walled = sclerenchyma; single protective layer = epidermis
Yaad rakhein: P-C-S: Parenchyma (thin, living) → Collenchyma (corner thickening, flexible) → Sclerenchyma (dead, lignified).
Answer: (B) Living cells with thin walls, capable of division in young tissues.
अवधारणा: मृदूतक जीवित, पतली भित्ति वाली कोशिकाओं से बना सरल स्थायी ऊतक है।
- कोशिकाएँ जीवित, पतली भित्ति, ढीली व्यवस्था, अंतरकोशिकीय स्थान
- नई कोशिकाएँ विभाजन कर सकती हैं; भोजन संग्रह करती हैं
- लचीलापन = स्थूलकोण ऊतक; मृत मोटी भित्ति = दृढ़ ऊतक; एक परत सुरक्षा = एपिडर्मिस
याद रखें: P-C-S: पैरेनकाइमा (पतली, जीवित) → कॉलेनकाइमा (कोनों पर मोटी) → स्क्लेरेनकाइमा (मृत)।
उत्तर: (B) पतली भित्ति वाली सजीव कोशिकाएँ, जो नए ऊतकों में विभाजन में सक्षम होती हैं।
RRB Technician Grade IIIGeneral SciencePlant tissues – parenchymaRRB Technician Grade III 2025 · 10 Mar Shift 1
Q83.Which of the following is NOT a factor responsible for grain storage losses?
निम्नलिखित में से कौन-सा, अनाज भंडारण में होने वाली हानि के लिए उत्तरदायी कारक नहीं है?
- AHigh-quality packagingउच्च-गुणवत्ता वाली पैकेजिंग
- BInadequate moisture and temperatureअनुपयुक्त नमी और तापमान
- CFungi and bacteriaकवक और जीवाणु
- DRodentsकृंतक (Rodents)
Show answer
Concept: Storage losses come from biotic (pests, rodents, microbes) and abiotic (moisture, temperature) factors.
- Rodents, insects, fungi and bacteria spoil stored grain
- Wrong moisture and temperature encourage these pests
- High-quality packaging actually prevents loss – so it is NOT a cause
Trick: In 'NOT a cause' questions, pick the option that sounds like a solution.
Answer: (A) High-quality packaging
अवधारणा: भंडारण हानि जैविक (कीट, चूहे, सूक्ष्मजीव) और अजैविक (नमी, तापमान) कारकों से होती है।
- चूहे, कीट, कवक, जीवाणु अनाज खराब करते हैं
- अनुचित नमी और तापमान इन्हें बढ़ाते हैं
- अच्छी पैकेजिंग हानि रोकती है – यह कारण नहीं है
ट्रिक: 'कारण नहीं' वाले प्रश्न में जो विकल्प समाधान जैसा लगे वही उत्तर।
उत्तर: (A) उच्च-गुणवत्ता वाली पैकेजिंग
RRB Technician Grade IIIGeneral ScienceStorage of grains – causes of lossRRB Technician Grade III 2025 · 10 Mar Shift 1
Q84.A farmer walks along the boundary of a square field with side 11 m, completing one round in 20 seconds. After walking for 3 minutes and 20 seconds, what is the magnitude of the displacement from his starting point?
एक किसान 11 m भुजा वाले एक वर्गाकार खेत की सीमा के अनुदिश चलता है और 20 सेकंड में एक चक्कर पूरा करता है। 3 मिनट 20 सेकंड तक चलने के बाद, उसके आरंभिक बिंदु से विस्थापन का परिमाण कितना है?
- A11 m
- B15.56 m
- C22 m
- D0 m
Show answer
Concept: Displacement after complete rounds of a closed path is zero.
- Time = 3 min 20 s = 200 s
- Rounds = complete rounds
- He is back at the start → displacement = 0 m
Trick: If time ÷ time-per-round is a whole number, displacement is 0 – no need to use the side length.
Answer: (D) 0 m
अवधारणा: बंद पथ के पूरे चक्कर लगाने पर विस्थापन शून्य होता है।
- समय = 3 मिनट 20 s = 200 s
- चक्कर = पूरे चक्कर
- किसान प्रारंभिक बिंदु पर → विस्थापन = 0 m
ट्रिक: समय ÷ एक चक्कर का समय पूर्ण संख्या हो तो विस्थापन 0 – भुजा की ज़रूरत नहीं।
उत्तर: (D) 0 m
RRB Technician Grade IIIGeneral ScienceDistance vs displacement – closed pathRRB Technician Grade III 2025 · 10 Mar Shift 1
Q85.Why is regular and controlled irrigation important for crop production?
फसल उत्पादन के लिए नियमित और नियंत्रित सिंचाई क्यों महत्वपूर्ण है?
- AIt makes plants dependent on artificial watering.यह पौधों को कृत्रिम सिंचाई पर निर्भर बना देती है।
- BIt reduces fertilizer use by supplying nutrients through water.यह जल के माध्यम से पोषक तत्व प्रदान करके उर्वरक के उपयोग को कम करती है।
- CIt ensures optimal water supply at critical growth stages.यह वृद्धि की महत्वपूर्ण अवस्थाओं में जल की इष्टतम आपूर्ति सुनिश्चित करती है।
- DIt increases soil salinity and prevents root growth.यह मृदा की लवणता बढ़ाती है और जड़ों की वृद्धि को रोकती है।
Show answer
Concept: Irrigation is supplying water to crops at proper intervals.
- Crops need water most at critical stages like germination, flowering and grain filling
- Timely, controlled irrigation gives optimum moisture and better yield
- Excess irrigation causes salinity and waterlogging – the opposite of the goal
Yaad rakhein: Drip and sprinkler irrigation save water and supply it right at the roots.
Answer: (C) It ensures optimal water supply at critical growth stages.
अवधारणा: सिंचाई = फसलों को उचित अंतराल पर पानी देना।
- अंकुरण, फूल आने और दाना भरने जैसी अवस्थाओं में पानी सबसे ज़रूरी
- नियंत्रित सिंचाई से उचित नमी और अधिक उपज
- अधिक सिंचाई से लवणता और जलभराव होता है
याद रखें: ड्रिप और स्प्रिंकलर सिंचाई पानी बचाती हैं।
उत्तर: (C) यह वृद्धि की महत्वपूर्ण अवस्थाओं में जल की इष्टतम आपूर्ति सुनिश्चित करती है।
RRB Technician Grade IIIGeneral ScienceIrrigation in crop productionRRB Technician Grade III 2025 · 10 Mar Shift 1
Q86.An object with a mass of 15 kg is placed 8 m above the ground. How much potential energy does the object have? (Using g = 9.8 m/s2)
15 kg द्रव्यमान की एक वस्तु भूमि से 8 m ऊपर रखी गई है। वस्तु में कितनी स्थितिज ऊर्जा है? (g = 9.8 m/s2 का उपयोग करें)
- A1500 J
- B784 J
- C1176 J
- D980 J
Show answer
Concept: .
- J
Trick: ; .
Answer: (C) 1176 J
अवधारणा: स्थितिज ऊर्जा = ।
- J
ट्रिक: ; ।
उत्तर: (C) 1176 J
RRB Technician Grade IIIGeneral ScienceGravitational potential energyRRB Technician Grade III 2025 · 10 Mar Shift 1
Q87.A scientist observed that an iron railing near the sea corroded faster than the same type of railing in a dry city. What could the main reason be?
एक वैज्ञानिक ने देखा कि समुद्र के पास लगी लोहे की रेलिंग, किसी शुष्क शहर में लगी उसी प्रकार की रेलिंग की तुलना में अधिक तेज़ी से संक्षारित हुई। इसका मुख्य कारण क्या हो सकता है?
- ASea air contains salt and moisture, which accelerates rusting.समुद्री वायु में लवण और नमी होती है, जो जंग लगने की प्रक्रिया को तीव्र करती है।
- BThe sea air is more humid, diluting the rusting process.समुद्री वायु अधिक आर्द्र होती है, जो जंग लगने की प्रक्रिया को तनु कर देती है।
- CThe iron near the sea is exposed to more sunlight.समुद्र के पास का लोहा अधिक सूर्य के प्रकाश के संपर्क में रहता है।
- DThe city air has less oxygen, preventing rust.शहर की वायु में ऑक्सीजन कम होती है, जिससे जंग नहीं लगता।
Show answer
Concept: Rusting needs both oxygen and water; dissolved salts speed it up.
- Sea air has high moisture and salt (NaCl)
- Salt water is a good electrolyte → faster electrochemical rusting
- Dry city air has little moisture, so rusting is slow
Yaad rakhein: Rust = hydrated iron(III) oxide, Fe₂O₃·xH₂O.
Answer: (A) Sea air contains salt and moisture, which accelerates rusting.
अवधारणा: जंग लगने के लिए ऑक्सीजन और जल दोनों चाहिए; घुले लवण इसे तेज़ करते हैं।
- समुद्री हवा में अधिक नमी और नमक (NaCl)
- खारा पानी अच्छा विद्युत-अपघट्य → जंग तेज़
- शुष्क शहर में नमी कम, जंग धीमी
याद रखें: जंग = जलयोजित आयरन(III) ऑक्साइड, Fe₂O₃·xH₂O।
उत्तर: (A) समुद्री वायु में लवण और नमी होती है, जो जंग लगने की प्रक्रिया को तीव्र करती है।
RRB Technician Grade IIIGeneral ScienceCorrosion (rusting) of ironRRB Technician Grade III 2025 · 10 Mar Shift 1
Q88.After fertilisation in humans, where does the growth and development of the embryo mainly occur?
मनुष्यों में निषेचन के बाद, भ्रूण की वृद्धि और विकास मुख्य रूप से कहाँ होता है?
- AFallopian tubeअंडवाहिनी (Fallopian tube)
- BVaginaयोनि
- CUterusगर्भाशय
- DOvaryअंडाशय
Show answer
Concept: Fertilisation occurs in the fallopian tube; the embryo grows in the uterus.
- Zygote divides and moves down to the uterus
- It implants in the uterine wall; placenta supplies nutrition
- The foetus develops there for about 9 months
Trick: Fertilisation = fallopian tube (oviduct); development = uterus (womb).
Answer: (C) Uterus
अवधारणा: निषेचन अंडवाहिनी (फैलोपियन ट्यूब) में होता है; भ्रूण का विकास गर्भाशय में।
- युग्मनज विभाजित होकर गर्भाशय में पहुँचता है
- गर्भाशय की भित्ति में आरोपित; प्लेसेंटा से पोषण
- लगभग 9 माह तक वहीं विकास
ट्रिक: निषेचन = अंडवाहिनी; विकास = गर्भाशय।
उत्तर: (C) गर्भाशय
RRB Technician Grade IIIGeneral ScienceHuman reproduction – implantationRRB Technician Grade III 2025 · 10 Mar Shift 1
Q89.A wire has a resistance of 10 Ω. If it is stretched to three times its original length (volume remaining constant), its new resistance will be _______.
एक तार का प्रतिरोध (resistance) 10 Ω है। यदि इसे खींचकर इसकी मूल लंबाई का तीन गुना कर दिया जाए (आयतन स्थिर रहता है), तो इसका नया प्रतिरोध _______ होगा।
- A90 Ω
- B3.33 Ω
- C10 Ω
- D30 Ω
Show answer
Concept: ; with volume constant, stretching n times makes .
- Length ×3 → area ÷3 (volume constant)
Trick: Stretch n times → resistance times.
Answer: (A) 90 Ω
अवधारणा: ; आयतन स्थिर रहने पर n गुना खींचने से ।
- लंबाई ×3 → क्षेत्रफल ÷3
ट्रिक: n गुना खींचें → प्रतिरोध गुना।
उत्तर: (A) 90 Ω
RRB Technician Grade IIIGeneral ScienceResistance of a stretched wireRRB Technician Grade III 2025 · 10 Mar Shift 1
Q90.Which of the following tissues is responsible for limb and body movement?
निम्नलिखित में से कौन-सा ऊतक अंगों और शरीर की गति के लिए उत्तरदायी है?
- AEpithelial tissueउपकला ऊतक
- BCardiac muscleहृदय पेशी
- CSmooth muscleचिकनी पेशी
- DSkeletal muscleकंकाल पेशी
Show answer
Concept: Skeletal (striated, voluntary) muscles are attached to bones and move limbs.
- Skeletal muscle: striated, voluntary, multinucleate
- Smooth muscle: involuntary (gut, blood vessels)
- Cardiac muscle: only in heart
Yaad rakhein: Voluntary movement = skeletal muscle; it is also called striated muscle.
Answer: (D) Skeletal muscle
अवधारणा: कंकाल (रेखित, ऐच्छिक) पेशियाँ हड्डियों से जुड़ी होती हैं और अंगों को गति देती हैं।
- कंकाल पेशी: रेखित, ऐच्छिक, बहुकेंद्रकीय
- चिकनी पेशी: अनैच्छिक (आहारनाल, रक्त वाहिकाएँ)
- हृदय पेशी: केवल हृदय में
याद रखें: ऐच्छिक गति = कंकाल पेशी (रेखित पेशी)।
उत्तर: (D) कंकाल पेशी
RRB Technician Grade IIIGeneral ScienceMuscle tissue – skeletal muscleRRB Technician Grade III 2025 · 10 Mar Shift 1
Q91.Which of the following statements best explains the functional advantage of the pollen tube formation in the process of fertilisation in flowering plants?
निम्नलिखित में से कौन-सा कथन पुष्पी पौधों में निषेचन की प्रक्रिया में पराग नलिका बनने के कार्यात्मक लाभ की सबसे अच्छी व्याख्या करता है?
- AIt allows the pollen grain to attach firmly to the stigma for self-pollination to occur efficientlyयह परागकण को वर्तिकाग्र से मज़बूती से जुड़ने देती है ताकि स्व-परागण कुशलतापूर्वक हो सके
- BIt helps the pollen grain to release its stored nutrients for the ovule to develop into a seedयह परागकण को अपने संचित पोषक तत्व मुक्त करने में सहायता करती है ताकि बीजांड बीज में विकसित हो सके
- CIt ensures direct transfer of the male germ-cell to the ovary, preventing wastage of pollen grainsयह नर जनन-कोशिका का अंडाशय तक सीधा स्थानांतरण सुनिश्चित करती है, जिससे परागकणों की बर्बादी रुकती है
- DIt enables the ovary to release egg cells toward the pollen grain for fusion to take placeयह अंडाशय को संलयन के लिए परागकण की ओर अंड कोशिकाएँ मुक्त करने में सक्षम बनाती है
Show answer
Concept: The pollen tube carries the male germ-cell from stigma through style to the ovule.
- Pollen lands on stigma and grows a tube through the style
- Tube enters the ovule and releases the male gamete near the egg
- Male gamete need not travel by water – direct, efficient delivery
Yaad rakhein: After fertilisation, ovule → seed and ovary → fruit.
Answer: (C) It ensures direct transfer of the male germ-cell to the ovary, preventing wastage of pollen grains
अवधारणा: पराग नलिका नर युग्मक को वर्तिकाग्र से वर्तिका होते हुए बीजांड तक ले जाती है।
- पराग वर्तिकाग्र पर गिरकर नलिका बनाता है
- नलिका बीजांड में पहुँचकर नर युग्मक छोड़ती है
- नर युग्मक सीधे पहुँचता है – पानी की ज़रूरत नहीं
याद रखें: निषेचन के बाद बीजांड → बीज, अंडाशय → फल।
उत्तर: (C) यह नर जनन-कोशिका का अंडाशय तक सीधा स्थानांतरण सुनिश्चित करती है, जिससे परागकणों की बर्बादी रुकती है
RRB Technician Grade IIIGeneral SciencePollen tube and fertilisationRRB Technician Grade III 2025 · 10 Mar Shift 1
Q92.The far point of a myopic person is 80 cm in front of the eye. Assuming the far point for normal vision is infinity, what is the required power (P) of the corrective lens?
एक निकट-दृष्टि दोष (myopia) से ग्रसित व्यक्ति का दूर बिंदु आँख के सामने 80 cm पर है। यह मानते हुए कि सामान्य दृष्टि के लिए दूर बिंदु अनंत पर होता है, संशोधक लेंस की आवश्यक क्षमता (P) कितनी है?
- A+0.80 D
- B+1.25 D
- C-0.80 D
- D-1.25 D
Show answer
Concept: Myopia is corrected by a concave lens with f = −(far point).
- D
Trick: Myopia → minus power; .
Answer: (D) -1.25 D
अवधारणा: निकट-दृष्टि दोष अवतल लेंस से ठीक होता है, f = −(दूर बिंदु)।
- D
ट्रिक: निकट-दृष्टि → ऋणात्मक क्षमता; ।
उत्तर: (D) -1.25 D
RRB Technician Grade IIIGeneral ScienceMyopia correction – lens powerRRB Technician Grade III 2025 · 10 Mar Shift 1
Q93.Which of the following statements is/are true regarding the speed of sound?
(i) The speed of sound decreases with an increase in the temperature of the medium. (ii) The speed of sound in solid state is greater than the speed of sound in gaseous state under the same external conditions.
(iii) The speed of sound is independent of the properties of the medium through which it travels.
ध्वनि की चाल के संबंध में निम्नलिखित में से कौन-सा/से कथन सत्य है/हैं?
(i) माध्यम के तापमान में वृद्धि के साथ ध्वनि की चाल घटती है। (ii) समान बाह्य परिस्थितियों में, ठोस अवस्था में ध्वनि की चाल गैसीय अवस्था में ध्वनि की चाल से अधिक होती है।
(iii) ध्वनि की चाल उस माध्यम के गुणों से स्वतंत्र होती है जिसमें से होकर वह गमन करती है।
- ABoth (i) and (ii)(i) और (ii) दोनों
- BBoth (i) and (iii)(i) और (iii) दोनों
- COnly (iii)केवल (iii)
- DOnly (ii)केवल (ii)
Show answer
Concept: Speed of sound depends on the medium and its temperature.
- (i) False – speed increases with temperature
- (ii) True – solids > liquids > gases
- (iii) False – it depends on elasticity and density of the medium
Yaad rakhein: Speed of sound in air at 25 °C ≈ 346 m/s; in steel ≈ 5960 m/s.
Answer: (D) Only (ii)
अवधारणा: ध्वनि की चाल माध्यम और उसके ताप पर निर्भर करती है।
- (i) गलत – ताप बढ़ने पर चाल बढ़ती है
- (ii) सही – ठोस > द्रव > गैस
- (iii) गलत – माध्यम की प्रत्यास्थता और घनत्व पर निर्भर
याद रखें: 25 °C पर वायु में चाल ≈ 346 m/s; स्टील में ≈ 5960 m/s।
उत्तर: (D) केवल (ii)
RRB Technician Grade IIIGeneral ScienceSpeed of sound – factorsRRB Technician Grade III 2025 · 10 Mar Shift 1
Q94.Why is electrolysis used for the extraction of metals high up in the reactivity series, such as sodium and aluminum?
सक्रियता श्रेणी में ऊपर स्थित धातुओं, जैसे सोडियम और ऐलुमिनियम, के निष्कर्षण के लिए विद्युत-अपघटन (electrolysis) का उपयोग क्यों किया जाता है?
- ABecause these metals exist in native stateक्योंकि ये धातुएँ मुक्त अवस्था में पाई जाती हैं
- BBecause these metals have low melting pointsक्योंकि इन धातुओं के गलनांक कम होते हैं
- CBecause these metals cannot be reduced by carbon or hydrogenक्योंकि इन धातुओं को कार्बन या हाइड्रोजन द्वारा अपचयित नहीं किया जा सकता
- DBecause these metals form volatile oxidesक्योंकि ये धातुएँ वाष्पशील ऑक्साइड बनाती हैं
Show answer
Concept: Very reactive metals hold oxygen more strongly than carbon does.
- Na, K, Ca, Mg, Al have more affinity for oxygen than carbon
- So carbon/hydrogen cannot reduce their oxides
- They are obtained by electrolysis of molten chlorides/oxides (metal deposits at cathode)
Yaad rakhein: Aluminium is extracted by electrolysis of molten alumina (Al₂O₃).
Answer: (C) Because these metals cannot be reduced by carbon or hydrogen
अवधारणा: अत्यधिक सक्रिय धातुएँ ऑक्सीजन को कार्बन से अधिक मज़बूती से पकड़ती हैं।
- Na, K, Ca, Mg, Al की ऑक्सीजन से बंधुता कार्बन से अधिक
- इसलिए कार्बन/हाइड्रोजन इनके ऑक्साइड का अपचयन नहीं कर सकते
- इन्हें गलित क्लोराइड/ऑक्साइड के विद्युत-अपघटन से प्राप्त करते हैं (धातु कैथोड पर)
याद रखें: एल्युमिनियम गलित एल्यूमिना (Al₂O₃) के विद्युत-अपघटन से मिलता है।
उत्तर: (C) क्योंकि इन धातुओं को कार्बन या हाइड्रोजन द्वारा अपचयित नहीं किया जा सकता
RRB Technician Grade IIIGeneral ScienceElectrolytic reduction of reactive metalsRRB Technician Grade III 2025 · 10 Mar Shift 1
Q95.Two resistors of 5Ω and 15 Ω are connected in series to a battery of 10 V. How much will flow through the circuit?
5Ω और 15 Ω के दो प्रतिरोधक 10 V की बैटरी से श्रेणीक्रम में जुड़े हैं। परिपथ से कितना प्रवाहित होगा?
- A0.5 A
- B200 A
- C2 A
- D0.4 A
Show answer
Concept: In series, ; then .
- A
Trick: Current can't exceed V/smallest R = A; series current is always less, so 0.5 A.
Answer: (A) 0.5 A
अवधारणा: श्रेणी में ; फिर ।
- A
ट्रिक: श्रेणी में धारा सबसे छोटे प्रतिरोध वाली धारा (2 A) से कम ही होगी।
उत्तर: (A) 0.5 A
RRB Technician Grade IIIGeneral ScienceOhm's law – series resistanceRRB Technician Grade III 2025 · 10 Mar Shift 1
Q96.Which of the following correctly differentiates ligament from tendon in human connective tissue?
मानव संयोजी ऊतक में स्नायुबंधन (ligament) और कंडरा (tendon) के बीच सही अंतर निम्नलिखित में से कौन-सा है?
- ALigament connects bone to bone; tendon connects muscle to boneस्नायुबंधन अस्थि को अस्थि से जोड़ता है; कंडरा पेशी को अस्थि से जोड़ता है
- BTendon is elastic, while ligament is completely non-elasticकंडरा प्रत्यास्थ होता है, जबकि स्नायुबंधन पूर्णतः अप्रत्यास्थ होता है
- CLigament connects muscle to bone, while tendon connects bone to boneस्नायुबंधन पेशी को अस्थि से जोड़ता है, जबकि कंडरा अस्थि को अस्थि से जोड़ता है
- DBoth ligament and tendon connect bones to bones but differ in colorस्नायुबंधन और कंडरा दोनों अस्थियों को अस्थियों से जोड़ते हैं परंतु रंग में भिन्न होते हैं
Show answer
Concept: Ligament joins bone to bone; tendon joins muscle to bone.
- Ligament: elastic, strong – holds bones together at joints
- Tendon: fibrous, very strong, limited flexibility – attaches muscle to bone
Trick: Ligament – 'L' for 'Link bones'; Tendon – 'T' for 'Tie muscle to bone'.
Answer: (A) Ligament connects bone to bone; tendon connects muscle to bone
अवधारणा: स्नायु (लिगामेंट) हड्डी को हड्डी से; कंडरा (टेंडन) पेशी को हड्डी से जोड़ता है।
- लिगामेंट: लचीला, मज़बूत – जोड़ों पर हड्डियाँ जोड़ता है
- टेंडन: रेशेदार, बहुत मज़बूत, कम लचीला – पेशी को हड्डी से जोड़ता है
ट्रिक: Ligament = 'L' for 'Link bones'; Tendon = 'T' for 'Tie muscle'।
उत्तर: (A) स्नायुबंधन अस्थि को अस्थि से जोड़ता है; कंडरा पेशी को अस्थि से जोड़ता है
RRB Technician Grade IIIGeneral ScienceConnective tissue – ligament and tendonRRB Technician Grade III 2025 · 10 Mar Shift 1
Q97.Why is vegetative propagation useful for agriculture purposes?
कृषि प्रयोजनों के लिए कायिक प्रवर्धन (vegetative propagation) क्यों उपयोगी है?
- AIt increases genetic variationयह आनुवंशिक विविधता बढ़ाता है
- BIt requires seeds for every generationइसमें प्रत्येक पीढ़ी के लिए बीजों की आवश्यकता होती है
- CIt produces identical plants rapidlyयह तेज़ी से एकसमान पौधे उत्पन्न करता है
- DIt prevents diseases naturallyयह प्राकृतिक रूप से रोगों को रोकता है
Show answer
Concept: Vegetative propagation produces new plants from stem, root or leaf without seeds.
- Offspring are genetically identical to the parent – desirable traits are kept
- Plants grow and bear fruits faster (e.g. banana, rose, sugarcane)
- It reduces variation, so option 'increases genetic variation' is wrong
Yaad rakhein: Seedless plants like banana and orange (some varieties) are grown only this way.
Answer: (C) It produces identical plants rapidly
अवधारणा: कायिक प्रवर्धन में तना, जड़ या पत्ती से बिना बीज नए पौधे बनते हैं।
- संतति आनुवंशिक रूप से जनक जैसी – अच्छे गुण बने रहते हैं
- पौधे जल्दी फल देते हैं (केला, गुलाब, गन्ना)
- विविधता नहीं बढ़ती – पहला विकल्प गलत
याद रखें: केले जैसे बीजरहित पौधे इसी से उगाए जाते हैं।
उत्तर: (C) यह तेज़ी से एकसमान पौधे उत्पन्न करता है
RRB Technician Grade IIIGeneral ScienceVegetative propagation – advantagesRRB Technician Grade III 2025 · 10 Mar Shift 1
Q98.Which of the following is the best example of uniform circular motion?
निम्नलिखित में से कौन-सा एकसमान वृत्तीय गति का सबसे अच्छा उदाहरण है?
- AA roller coaster on a loopलूप पर चलता रोलर कोस्टर
- BA racing car on a curved track slowing downवक्र पथ पर धीमी होती रेसिंग कार
- CMoon revolving around the Earth in a circular orbitवृत्ताकार कक्षा में पृथ्वी की परिक्रमा करता चंद्रमा
- DA yo-yo being swung in a vertical circle at changing speedबदलती चाल से ऊर्ध्वाधर वृत्त में घुमाया जा रहा यो-यो
Show answer
Concept: Uniform circular motion = constant speed on a circular path.
- Moon moves in a nearly circular orbit at almost constant speed
- Roller coaster, slowing racing car and changing-speed yo-yo all change speed → not uniform
Trick: Eliminate every option with 'slowing' or 'changing speed'.
Answer: (C) Moon revolving around the Earth in a circular orbit
अवधारणा: एकसमान वृत्तीय गति = वृत्ताकार पथ पर नियत चाल।
- चंद्रमा लगभग वृत्ताकार कक्षा में लगभग नियत चाल से घूमता है
- रोलर कोस्टर, धीमी होती कार, बदलती चाल वाला यो-यो – चाल बदलती है
ट्रिक: 'धीमा होना' या 'बदलती चाल' वाले विकल्प हटाएँ।
उत्तर: (C) वृत्ताकार कक्षा में पृथ्वी की परिक्रमा करता चंद्रमा
RRB Technician Grade IIIGeneral ScienceUniform circular motionRRB Technician Grade III 2025 · 10 Mar Shift 1
Q99.An object has a mass of 12 kg and moves with a constant speed of 8 m/s. How much kinetic energy does it have?
एक वस्तु का द्रव्यमान 12 kg है और वह 8 m/s की स्थिर चाल से गति करती है। उसमें कितनी गतिज ऊर्जा है?
- A256 J
- B768 J
- C512 J
- D384 J
Show answer
Concept: KE = .
- J
Trick: , so directly.
Answer: (D) 384 J
अवधारणा: गतिज ऊर्जा = ।
- J
ट्रिक: → ।
उत्तर: (D) 384 J
RRB Technician Grade IIIGeneral ScienceKinetic energyRRB Technician Grade III 2025 · 10 Mar Shift 1
Q100.Which of the following correctly represents the unit mass of a molecule of water (H₂O)?
निम्नलिखित में से कौन-सा जल (H₂O) के एक अणु के इकाई द्रव्यमान को सही रूप से दर्शाता है?
- A18 u
- B10 u
- C16 u
- D20 u
Show answer
Concept: Molecular mass = sum of atomic masses (H = 1 u, O = 16 u).
- u
Yaad rakhein: 1 mole of water = 18 g.
Answer: (A) 18 u
अवधारणा: आणविक द्रव्यमान = परमाणु द्रव्यमानों का योग (H = 1 u, O = 16 u)।
- u
याद रखें: 1 मोल जल = 18 g।
उत्तर: (A) 18 u
RRB Technician Grade IIIGeneral ScienceMolecular massRRB Technician Grade III 2025 · 10 Mar Shift 1