NEET UG · 2,240 questions

NEET UG 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

2,240 questions.

Q1581.
The compound C7H8 undergoes the following reactions:
C7H8 →3Cl2/Δ A →Br2/Fe B →Zn/HCl C
The product 'C' is
यौगिक C7H8 निम्नलिखित अभिक्रियाएँ करता है:
C7H8 →3Cl2/Δ A →Br2/Fe B →Zn/HCl C
उत्पाद 'C' है
  1. A3-bromo-2,4,6-trichlorotoluene3-ब्रोमो-2,4,6-ट्राइक्लोरोटॉलूईन
  2. Bo-bromotolueneo-ब्रोमोटॉलूईन
  3. Cm-bromotoluenem-ब्रोमोटॉलूईन
  4. Dp-bromotoluenep-ब्रोमोटॉलूईन
Show answer

Concept: Cl2 with heat/light substitutes the side chain (free radical); –CCl3 is strongly electron-withdrawing, so it is a meta director; Zn/HCl reduces –CCl3 back to –CH3.

  1. C7H8 = toluene. 3Cl2/Δ → C6H5CCl3 (A, benzotrichloride).
  2. Br2/Fe: –CCl3 directs Br to meta ⇒ m-BrC6H4CCl3 (B).
  3. Zn/HCl: –CCl3 → –CH3 ⇒ m-bromotoluene (C).
  4. Direct bromination of toluene would give o/p products – the trick here is the temporary –CCl3 group.

Short trick: Convert an o/p director (–CH3) into a meta director (–CCl3), substitute, then convert back – a classic route to meta products.

Answer: (C)

अवधारणा: ऊष्मा/प्रकाश में Cl2 पार्श्व-श्रृंखला में प्रतिस्थापन करता है (मुक्त मूलक); –CCl3 प्रबल इलेक्ट्रॉन-आकर्षी है, अतः मेटा-निर्देशक है; Zn/HCl, –CCl3 को पुनः –CH3 में अपचयित करता है।

  1. C7H8 = टॉलूईन। 3Cl2/Δ → C6H5CCl3 (A, बेन्ज़ोट्राइक्लोराइड)।
  2. Br2/Fe: –CCl3, Br को मेटा स्थिति पर भेजता है ⇒ m-BrC6H4CCl3 (B)।
  3. Zn/HCl: –CCl3 → –CH3 ⇒ m-ब्रोमोटॉलूईन (C)।
  4. टॉलूईन का सीधा ब्रोमीनन o/p उत्पाद देता — यहाँ युक्ति अस्थायी –CCl3 समूह है।

शॉर्ट ट्रिक: o/p-निर्देशक (–CH3) को मेटा-निर्देशक (–CCl3) में बदलें, प्रतिस्थापन करें, फिर वापस बदलें – मेटा उत्पाद पाने का प्रसिद्ध तरीका।

उत्तर: (C)

NEET UGChemistryHaloarenes – side-chain chlorination and orientationNEET UG 2018 · 6 May Shift 1
Q1582.
Hydrocarbon (A) reacts with bromine by substitution to form an alkyl bromide which by Wurtz reaction is converted to gaseous hydrocarbon containing less than four carbon atoms. (A) is
हाइड्रोकार्बन (A) ब्रोमीन से प्रतिस्थापन द्वारा अभिक्रिया करके एक ऐल्किल ब्रोमाइड बनाता है, जो वुर्ट्ज़ अभिक्रिया द्वारा चार से कम कार्बन परमाणुओं वाले गैसीय हाइड्रोकार्बन में बदल जाता है। (A) है
  1. ACH3 – CH3
  2. BCH2 = CH2
  3. CCH ≡ CH
  4. DCH4
Show answer

Concept: Wurtz reaction doubles the carbon number: 2R–X + 2Na → R–R + 2NaX. Substitution by Br2 needs an alkane.

  1. CH4 + Br2 (hν) → CH3Br + HBr.
  2. 2CH3Br + 2Na (dry ether) → CH3–CH3 (2 C, gas) – fewer than four C ✔.
  3. Ethane → C2H5Br → butane (4 C, not "less than four") ✘.
  4. Ethene and ethyne react with Br2 by addition, not substitution ✘.

Short trick: Product carbons = 2 × carbons of A; "less than 4" ⇒ A has 1 C ⇒ CH4.

Answer: (D)

अवधारणा: वुर्ट्ज़ अभिक्रिया कार्बन संख्या दोगुनी करती है: 2R–X + 2Na → R–R + 2NaX। Br2 द्वारा प्रतिस्थापन के लिए ऐल्केन चाहिए।

  1. CH4 + Br2 (hν) → CH3Br + HBr।
  2. 2CH3Br + 2Na (शुष्क ईथर) → CH3–CH3 (2 C, गैस) – चार से कम C ✔।
  3. एथेन → C2H5Br → ब्यूटेन (4 C, "चार से कम" नहीं) ✘।
  4. एथीन और एथाइन, Br2 से योगज अभिक्रिया करते हैं, प्रतिस्थापन नहीं ✘।

शॉर्ट ट्रिक: उत्पाद के कार्बन = 2 × A के कार्बन; "4 से कम" ⇒ A में 1 C ⇒ CH4।

उत्तर: (D)

NEET UGChemistryHydrocarbons – Wurtz reactionNEET UG 2018 · 6 May Shift 1
Q1583.
Which of the following molecules represents the order of hybridisation sp2, sp2, sp, sp from left to right atoms?
निम्नलिखित में से कौन-सा अणु बाएँ से दाएँ परमाणुओं के संकरण का क्रम sp2, sp2, sp, sp दर्शाता है?
  1. ACH2 = CH – CH = CH2
  2. BCH2 = CH – C ≡ CH
  3. CHC ≡ C – C ≡ CH
  4. DCH3 – CH = CH – CH3
Show answer

Concept: Carbon in a double bond (C=C) is sp2; in a triple bond (C≡C) sp; with only single bonds sp3.

  1. CH2=CH–C≡CH: C1, C2 (double bond) sp2, sp2; C3, C4 (triple bond) sp, sp ✔.
  2. (A) sp2, sp2, sp2, sp2.
  3. (C) sp, sp, sp, sp.
  4. (D) sp3, sp2, sp2, sp3.

Short trick: Number of σ-bonds around a C = number of hybrid orbitals: 4 → sp3, 3 → sp2, 2 → sp. "ene then yne" = sp2, sp2, sp, sp (vinylacetylene).

Answer: (B)

अवधारणा: द्वि-आबंध (C=C) वाला कार्बन sp2; त्रि-आबंध (C≡C) वाला sp; केवल एकल आबंधों वाला sp3 होता है।

  1. CH2=CH–C≡CH: C1, C2 (द्वि-आबंध) sp2, sp2; C3, C4 (त्रि-आबंध) sp, sp ✔।
  2. (A) sp2, sp2, sp2, sp2।
  3. (C) sp, sp, sp, sp।
  4. (D) sp3, sp2, sp2, sp3।

शॉर्ट ट्रिक: C के चारों ओर σ-आबंधों की संख्या = संकर कक्षकों की संख्या: 4 → sp3, 3 → sp2, 2 → sp। "पहले ईन फिर आइन" = sp2, sp2, sp, sp (वाइनिलऐसीटिलीन)।

उत्तर: (B)

NEET UGChemistryOrganic chemistry basics – hybridisationNEET UG 2018 · 6 May Shift 1
Q1584.
Which of the following carbocations is expected to be most stable?
निम्नलिखित में से कौन-सा कार्बधनायन सर्वाधिक स्थायी होने की संभावना है?
  1. A
  2. B
  3. C
  4. D
Show answer

Concept: In an arenium (σ-complex) ion the positive charge is delocalised over the three ring carbons that are ortho and para to the sp3 carbon. –NO2 (strong –I, –R) destabilises the ion most when + sits on the carbon carrying NO2.

  1. (A): sp3 carbon is meta to C–NO2 ⇒ + is spread over the carbons ortho/para to the sp3 C, never on C–NO2 ⇒ least destabilised, most stable.
  2. (B): sp3 C is para to C–NO2 ⇒ + lies directly on C–NO2 (as drawn) – highly destabilised.
  3. (C): sp3 C is para to C–NO2 ⇒ one resonance form puts + on C–NO2 – destabilised.
  4. (D): sp3 C is ortho to C–NO2 ⇒ + directly on C–NO2 – highly destabilised.

Short trick: This is why –NO2 is a meta director: only attack meta to NO2 keeps + away from the carbon bearing NO2.

Answer: (A)

अवधारणा: ऐरीनियम (σ-संकुल) आयन में धनावेश sp3 कार्बन के ऑर्थो और पैरा स्थित तीन वलय-कार्बनों पर विस्थानित रहता है। –NO2 (प्रबल –I, –R) आयन को सबसे अधिक अस्थायी तब करता है जब + उसी कार्बन पर हो जिस पर NO2 जुड़ा है।

  1. (A): sp3 कार्बन, C–NO2 के मेटा पर है ⇒ + केवल sp3 C के ऑर्थो/पैरा कार्बनों पर फैलता है, C–NO2 पर कभी नहीं ⇒ सबसे कम अस्थायीकरण, सर्वाधिक स्थायी।
  2. (B): sp3 C, C–NO2 के पैरा पर ⇒ + सीधे C–NO2 पर (जैसा दर्शाया गया है) – अत्यधिक अस्थायी।
  3. (C): sp3 C, C–NO2 के पैरा पर ⇒ एक अनुनादी रूप में + C–NO2 पर आता है – अस्थायी।
  4. (D): sp3 C, C–NO2 के ऑर्थो पर ⇒ + सीधे C–NO2 पर – अत्यधिक अस्थायी।

शॉर्ट ट्रिक: इसी कारण –NO2 मेटा-निर्देशक है: केवल NO2 के मेटा पर आक्रमण ही + को NO2 वाले कार्बन से दूर रखता है।

उत्तर: (A)

NEET UGChemistryOrganic chemistry basics – stability of arenium carbocationsNEET UG 2018 · 6 May Shift 1
Q1585.
Which of the following is correct with respect to – I effect of the substituents? (R = alkyl)
प्रतिस्थापियों के – I प्रभाव के संबंध में निम्नलिखित में से कौन-सा सही है? (R = ऐल्किल)
  1. A– NH2 > – OR > – F
  2. B– NR2 < – OR < – F
  3. C– NH2 < – OR < – F
  4. D– NR2 > – OR > – F
Show answer

Concept: The –I effect of a group depends mainly on the electronegativity of the atom attached to carbon: N (3.0) < O (3.5) < F (4.0). Hence –I: –NH2 < –OR < –F.

  1. (C) –NH2 < –OR < –F is the standard textbook order (–NH2 < –OH/–OR < –F) ✔.
  2. (A) and (D) reverse the order – F, the most electronegative, must have the strongest –I ✘.
  3. (B) also places N-groups lowest, but –NR2 is not the group used in the standard –I series; the alkyl groups on N push electrons (+I) and blur the comparison, so the clean, expected answer is (C).

Short trick: –I follows electronegativity of the first atom: F > O > N. Pick the option ending in '< –F' with the simple –NH2 group.

Answer: (C)

अवधारणा: किसी समूह का –I प्रभाव मुख्यतः कार्बन से जुड़े परमाणु की विद्युत-ऋणात्मकता पर निर्भर करता है: N (3.0) < O (3.5) < F (4.0)। अतः –I: –NH2 < –OR < –F।

  1. (C) –NH2 < –OR < –F पाठ्यपुस्तक का मानक क्रम है (–NH2 < –OH/–OR < –F) ✔।
  2. (A) और (D) क्रम को उलट देते हैं – सबसे अधिक विद्युत-ऋणात्मक F का –I प्रभाव सबसे प्रबल होना चाहिए ✘।
  3. (B) में भी N-समूह सबसे नीचे है, परंतु –NR2 मानक –I श्रेणी का समूह नहीं है; N पर लगे ऐल्किल समूह इलेक्ट्रॉन देते हैं (+I) और तुलना को अस्पष्ट कर देते हैं, अतः स्पष्ट अपेक्षित उत्तर (C) है।

शॉर्ट ट्रिक: –I प्रभाव पहले परमाणु की विद्युत-ऋणात्मकता के अनुसार: F > O > N। '< –F' पर समाप्त होने वाला वह विकल्प चुनें जिसमें सरल –NH2 समूह है।

उत्तर: (C)

NEET UGChemistryOrganic chemistry basics – inductive effectNEET UG 2018 · 6 May Shift 1
Q1586.
In the reaction

The electrophile involved is
अभिक्रिया

में सम्मिलित इलेक्ट्रॉनरागी है
  1. ADichloromethyl anion (C⊖HCl2)डाइक्लोरोमेथिल ऋणायन (C⊖HCl2)
  2. BFormyl cation (C⊕HO)फॉर्मिल धनायन (C⊕HO)
  3. CDichloromethyl cation (C⊕HCl2)डाइक्लोरोमेथिल धनायन (C⊕HCl2)
  4. DDichlorocarbene (:CCl2)डाइक्लोरोकार्बीन (:CCl2)
Show answer

Concept: Reimer–Tiemann reaction: phenol + CHCl3 + aq. NaOH → salicylaldehyde (after acidification). The electrophile is the electron-deficient (6-electron) dichlorocarbene.

  1. CHCl3 + OH– ⇌ –:CCl3 + H2O
  2. –:CCl3 → :CCl2 + Cl– (α-elimination)
  3. :CCl2 attacks the o-position of the phenoxide ion; the –CHCl2 group formed is hydrolysed to –CHO.
  4. An anion (A) cannot be an electrophile; CHO+ (B) and CHCl2+ (C) are not formed in alkaline medium.

Short trick: Reimer–Tiemann ↔ carbene; the same :CCl2 appears in the carbylamine test (CHCl3 + KOH).

Answer: (D)

अवधारणा: राइमर-टीमान अभिक्रिया: फीनॉल + CHCl3 + जलीय NaOH → सैलिसिलैल्डिहाइड (अम्लीकरण के बाद)। इलेक्ट्रॉनरागी इलेक्ट्रॉन-न्यून (6-इलेक्ट्रॉन) डाइक्लोरोकार्बीन है।

  1. CHCl3 + OH– ⇌ –:CCl3 + H2O
  2. –:CCl3 → :CCl2 + Cl– (α-विलोपन)
  3. :CCl2 फीनॉक्साइड आयन की o-स्थिति पर आक्रमण करता है; बना हुआ –CHCl2 समूह जल-अपघटित होकर –CHO बनता है।
  4. ऋणायन (A) इलेक्ट्रॉनरागी नहीं हो सकता; CHO+ (B) और CHCl2+ (C) क्षारीय माध्यम में नहीं बनते।

शॉर्ट ट्रिक: राइमर-टीमान ↔ कार्बीन; यही :CCl2 कार्बिलऐमीन परीक्षण (CHCl3 + KOH) में भी बनता है।

उत्तर: (D)

NEET UGChemistryPhenols – Reimer–Tiemann reactionNEET UG 2018 · 6 May Shift 1
Q1587.
Carboxylic acids have higher boiling points than aldehydes, ketones and even alcohols of comparable molecular mass. It is due to their
कार्बोक्सिलिक अम्लों के क्वथनांक तुलनीय आण्विक द्रव्यमान वाले ऐल्डिहाइडों, कीटोनों और यहाँ तक कि ऐल्कोहॉलों से भी अधिक होते हैं। इसका कारण है इनका
  1. AMore extensive association of carboxylic acid via van der Waals force of attractionवान्डरवाल्स आकर्षण बलों द्वारा कार्बोक्सिलिक अम्ल का अधिक व्यापक संगुणन
  2. BFormation of carboxylate ionकार्बोक्सिलेट आयन का बनना
  3. CFormation of intramolecular H-bondingअंतःअणुक (intramolecular) H-आबंधन का बनना
  4. DFormation of intermolecular H-bondingअंतराअणुक (intermolecular) H-आबंधन का बनना
Show answer

Concept: Carboxylic acids form strong intermolecular H-bonds; two molecules pair up as a cyclic dimer (each –COOH gives and accepts an H-bond), which persists even in the vapour phase.

  1. More extensive intermolecular H-bonding than in alcohols ⇒ more energy needed to separate molecules ⇒ higher b.p.
  2. (A) – van der Waals forces are similar for compounds of comparable mass; they do not explain the difference.
  3. (B) – carboxylate ions are not formed in the pure acid.
  4. (C) – intramolecular H-bonding would lower the b.p. (e.g. o-nitrophenol).

Short trick: High b.p. ⇒ INTER-molecular H-bonds; intramolecular H-bonds lower b.p. and volatility.

Answer: (D)

अवधारणा: कार्बोक्सिलिक अम्ल प्रबल अंतराअणुक H-आबंध बनाते हैं; दो अणु चक्रीय द्वितय (dimer) बनाते हैं (प्रत्येक –COOH एक H-आबंध देता और लेता है), जो वाष्प अवस्था में भी बना रहता है।

  1. ऐल्कोहॉल से अधिक व्यापक अंतराअणुक H-आबंधन ⇒ अणुओं को अलग करने में अधिक ऊर्जा ⇒ उच्च क्वथनांक।
  2. (A) – तुलनीय द्रव्यमान वाले यौगिकों में वान्डरवाल्स बल लगभग समान होते हैं; ये अंतर की व्याख्या नहीं करते।
  3. (B) – शुद्ध अम्ल में कार्बोक्सिलेट आयन नहीं बनते।
  4. (C) – अंतःअणुक H-आबंधन क्वथनांक को कम करता है (जैसे o-नाइट्रोफीनॉल)।

शॉर्ट ट्रिक: उच्च क्वथनांक ⇒ अंतराअणुक H-आबंध; अंतःअणुक H-आबंध क्वथनांक और वाष्पशीलता घटाते हैं।

उत्तर: (D)

NEET UGChemistryCarboxylic acids – boiling point and H-bondingNEET UG 2018 · 6 May Shift 1
Q1588.
Compound A, C8H10O, is found to react with NaOI (produced by reacting Y with NaOH) and yields a yellow precipitate with characteristic smell.
A and Y are respectively
यौगिक A, C8H10O, NaOI (जो Y की NaOH से अभिक्रिया द्वारा बनता है) से अभिक्रिया करके विशिष्ट गंध वाला पीला अवक्षेप देता है।
A और Y क्रमशः हैं
  1. A and I2 तथा I2
  2. B and I2 तथा I2
  3. C and I2 तथा I2
  4. D and I2 तथा I2
Show answer

Concept: Iodoform test (yellow CHI3, antiseptic smell) is given by compounds with CH3CO– or CH3CH(OH)– group. NaOI is made from I2 + NaOH, so Y = I2.

  1. 2NaOH + I2 → NaOI + NaI + H2O.
  2. (A) 1-phenylethanol C6H5CH(OH)CH3 (C8H10O) has CH3CH(OH)– ⇒ oxidised to acetophenone, then gives CHI3 + C6H5COONa ✔.
  3. (B) 2-phenylethanol, (C) 4-methylbenzyl alcohol – primary alcohols without CH3CH(OH)– ✘.
  4. (D) 2,4-dimethylphenol – a phenol, no CH3CH(OH)– unit ✘.

Short trick: Look for "CH3 on the carbon that carries OH" – only (A) has it.

Answer: (A)

अवधारणा: आयोडोफॉर्म परीक्षण (पीला CHI3, पूतिरोधी गंध) उन यौगिकों द्वारा दिया जाता है जिनमें CH3CO– या CH3CH(OH)– समूह हो। NaOI, I2 + NaOH से बनता है, अतः Y = I2।

  1. 2NaOH + I2 → NaOI + NaI + H2O।
  2. (A) 1-फेनिलएथेनॉल C6H5CH(OH)CH3 (C8H10O) में CH3CH(OH)– है ⇒ ऐसीटोफ़ीनोन में ऑक्सीकृत होकर CHI3 + C6H5COONa देता है ✔।
  3. (B) 2-फेनिलएथेनॉल, (C) 4-मेथिलबेन्ज़िल ऐल्कोहॉल – प्राथमिक ऐल्कोहॉल, CH3CH(OH)– नहीं ✘।
  4. (D) 2,4-डाइमेथिलफीनॉल – फीनॉल है, CH3CH(OH)– इकाई नहीं ✘।

शॉर्ट ट्रिक: "OH वाले कार्बन पर CH3" खोजें – यह केवल (A) में है।

उत्तर: (A)

NEET UGChemistryAlcohols – iodoform testNEET UG 2018 · 6 May Shift 1
Q1589.
Match the metal ions given in Column I with the spin magnetic moments of the ions given in Column II and assign the correct code :
Column IColumn II
a. Co3+i. 8 BM
b. Cr3+ii. 35 BM
c. Fe3+iii. 3 BM
d. Ni2+iv. 24 BM
v. 15 BM
स्तंभ I में दिए गए धातु आयनों का स्तंभ II में दिए गए आयनों के प्रचक्रण चुंबकीय आघूर्णों से मिलान कीजिए और सही कूट चुनिए :
स्तंभ Iस्तंभ II
a. Co3+i. 8 BM
b. Cr3+ii. 35 BM
c. Fe3+iii. 3 BM
d. Ni2+iv. 24 BM
v. 15 BM
  1. Aa-iv, b-i, c-ii, d-iii
  2. Ba-i, b-ii, c-iii, d-iv
  3. Ca-iv, b-v, c-ii, d-i
  4. Da-iii, b-v, c-i, d-ii
Show answer

Concept: Spin-only moment μ = n(n+2) BM, n = number of unpaired electrons.

  1. Co3+: [Ar]3d6, n = 4 ⇒ μ = 4×6=24 BM (iv)
  2. Cr3+: [Ar]3d3, n = 3 ⇒ μ = 3×5=15 BM (v)
  3. Fe3+: [Ar]3d5, n = 5 ⇒ μ = 5×7=35 BM (ii)
  4. Ni2+: [Ar]3d8, n = 2 ⇒ μ = 2×4=8 BM (i)
  5. Code: a-iv, b-v, c-ii, d-i.

Short trick: n(n+2) values to remember: n = 1→3, 2→8, 3→15, 4→24, 5→35. Fe3+ (d5) = √35 alone fixes c-ii; with a-iv only (A) and (C) remain, and Cr3+ = √15 picks (C).

Answer: (C)

अवधारणा: प्रचक्रण-मात्र आघूर्ण μ = n(n+2) BM, n = अयुग्मित इलेक्ट्रॉनों की संख्या।

  1. Co3+: [Ar]3d6, n = 4 ⇒ μ = 4×6=24 BM (iv)
  2. Cr3+: [Ar]3d3, n = 3 ⇒ μ = 3×5=15 BM (v)
  3. Fe3+: [Ar]3d5, n = 5 ⇒ μ = 5×7=35 BM (ii)
  4. Ni2+: [Ar]3d8, n = 2 ⇒ μ = 2×4=8 BM (i)
  5. कूट: a-iv, b-v, c-ii, d-i।

शॉर्ट ट्रिक: n(n+2) के मान याद रखें: n = 1→3, 2→8, 3→15, 4→24, 5→35। Fe3+ (d5) = √35 से c-ii तय; a-iv के साथ केवल (A) और (C) बचते हैं, और Cr3+ = √15 से (C)।

उत्तर: (C)

NEET UGChemistryd-Block – spin-only magnetic momentNEET UG 2018 · 6 May Shift 1
Q1590.
Which one of the following ions exhibits d-d transition and paramagnetism as well?
निम्नलिखित में से कौन-सा आयन d-d संक्रमण और अनुचुंबकत्व दोनों दर्शाता है?
  1. AMnO4–
  2. BCr2O72–
  3. CCrO42–
  4. DMnO42–
Show answer

Concept: Both d-d transition and paramagnetism need at least one unpaired d-electron (d1–d9). d0 ions are diamagnetic; their colour comes from charge transfer (LMCT), not d-d.

  1. MnO4–: Mn(+7) = 3d0 – diamagnetic; purple colour is charge transfer.
  2. Cr2O72–, CrO42–: Cr(+6) = 3d0 – diamagnetic.
  3. MnO42–: Mn(+6) = 3d1, n = 1 ⇒ paramagnetic and shows d-d transition ✔.

Short trick: Count d-electrons = group number − oxidation state: Mn(7−6) = 1 ⇒ only manganate has a d-electron.

Answer: (D)

अवधारणा: d-d संक्रमण और अनुचुंबकत्व दोनों के लिए कम से कम एक अयुग्मित d-इलेक्ट्रॉन (d1–d9) चाहिए। d0 आयन प्रतिचुंबकीय होते हैं; इनका रंग आवेश-स्थानांतरण (LMCT) से होता है, d-d से नहीं।

  1. MnO4–: Mn(+7) = 3d0 – प्रतिचुंबकीय; बैंगनी रंग आवेश-स्थानांतरण के कारण।
  2. Cr2O72–, CrO42–: Cr(+6) = 3d0 – प्रतिचुंबकीय।
  3. MnO42–: Mn(+6) = 3d1, n = 1 ⇒ अनुचुंबकीय और d-d संक्रमण दर्शाता है ✔।

शॉर्ट ट्रिक: d-इलेक्ट्रॉन = वर्ग संख्या − ऑक्सीकरण अवस्था: Mn(7−6) = 1 ⇒ केवल मैंगनेट में d-इलेक्ट्रॉन है।

उत्तर: (D)

NEET UGChemistryd-Block – colour and magnetism of oxoanionsNEET UG 2018 · 6 May Shift 1
Q1591.
Iron carbonyl, Fe(CO)5 is
आयरन कार्बोनिल, Fe(CO)5 है
  1. ATrinuclearत्रिनाभिकीय (Trinuclear)
  2. BMononuclearएकनाभिकीय (Mononuclear)
  3. CTetranuclearचतुर्नाभिकीय (Tetranuclear)
  4. DDinuclearद्विनाभिकीय (Dinuclear)
Show answer

Concept: Nuclearity = number of metal atoms in one complex unit.

  1. Fe(CO)5 has one Fe atom ⇒ mononuclear (trigonal bipyramidal, dsp3).
  2. Compare: Co2(CO)8, Mn2(CO)10 – dinuclear; Fe3(CO)12 – trinuclear.

Short trick: Just read the subscript on the metal: Fe1 ⇒ mono.

Answer: (B)

अवधारणा: नाभिकता = एक संकुल इकाई में धातु परमाणुओं की संख्या।

  1. Fe(CO)5 में एक Fe परमाणु है ⇒ एकनाभिकीय (त्रिकोणीय द्विपिरैमिडी, dsp3)।
  2. तुलना: Co2(CO)8, Mn2(CO)10 – द्विनाभिकीय; Fe3(CO)12 – त्रिनाभिकीय।

शॉर्ट ट्रिक: धातु पर लिखा अधोलेख देखें: Fe1 ⇒ एक।

उत्तर: (B)

NEET UGChemistryCoordination compounds – metal carbonylsNEET UG 2018 · 6 May Shift 1
Q1592.
The type of isomerism shown by the complex [CoCl2(en)2] is
संकुल [CoCl2(en)2] द्वारा दर्शाई जाने वाली समावयवता का प्रकार है
  1. AIonization isomerismआयनन समावयवता
  2. BCoordination isomerismउपसहसंयोजन समावयवता
  3. CGeometrical isomerismज्यामितीय समावयवता
  4. DLinkage isomerismबंधनी (linkage) समावयवता
Show answer

Concept: An octahedral complex of type [M(AA)2B2] shows geometrical (cis–trans) isomerism; the cis form is also optically active.

  1. Co has CN 6 (2 Cl + 2 bidentate en) ⇒ octahedral [M(AA)2B2].
  2. Two Cl can be opposite (trans) or adjacent (cis) ⇒ geometrical isomers.
  3. Ionization isomerism needs a counter-ion to exchange; coordination isomerism needs both cation and anion to be complexes; linkage isomerism needs an ambidentate ligand (NO2–, SCN–) – none present.

Short trick: [M(AA)2B2] ⇒ cis + trans, and cis exists as d and l ⇒ 3 stereoisomers in total.

Answer: (C)

अवधारणा: [M(AA)2B2] प्रकार का अष्टफलकीय संकुल ज्यामितीय (समपक्ष–विपक्ष) समावयवता दर्शाता है; समपक्ष (cis) रूप प्रकाशिक सक्रिय भी होता है।

  1. Co की उपसहसंयोजन संख्या 6 है (2 Cl + 2 द्विदंतुर en) ⇒ अष्टफलकीय [M(AA)2B2]।
  2. दोनों Cl आमने-सामने (विपक्ष/trans) या पास-पास (समपक्ष/cis) हो सकते हैं ⇒ ज्यामितीय समावयवी।
  3. आयनन समावयवता के लिए बदलने योग्य प्रति-आयन चाहिए; उपसहसंयोजन समावयवता के लिए धनायन और ऋणायन दोनों संकुल होने चाहिए; बंधनी समावयवता के लिए उभयदंती लिगन्ड (NO2–, SCN–) चाहिए – इनमें से कोई उपस्थित नहीं।

शॉर्ट ट्रिक: [M(AA)2B2] ⇒ cis + trans, और cis के d तथा l रूप ⇒ कुल 3 त्रिविम समावयवी।

उत्तर: (C)

NEET UGChemistryCoordination compounds – isomerismNEET UG 2018 · 6 May Shift 1
Q1593.
The geometry and magnetic behaviour of the complex [Ni(CO)4] are
संकुल [Ni(CO)4] की ज्यामिति और चुंबकीय व्यवहार हैं
  1. ASquare planar geometry and paramagneticवर्ग समतली ज्यामिति और अनुचुंबकीय
  2. BTetrahedral geometry and diamagneticचतुष्फलकीय ज्यामिति और प्रतिचुंबकीय
  3. CSquare planar geometry and diamagneticवर्ग समतली ज्यामिति और प्रतिचुंबकीय
  4. DTetrahedral geometry and paramagneticचतुष्फलकीय ज्यामिति और अनुचुंबकीय
Show answer

Concept: In [Ni(CO)4] nickel is in the zero oxidation state; CO is a strong-field ligand.

  1. Ni(0): [Ar]3d84s2; CO pushes the 4s electrons into 3d ⇒ 3d104s0.
  2. Four CO use the empty 4s + three 4p orbitals ⇒ sp3 ⇒ tetrahedral.
  3. All electrons paired (3d10) ⇒ diamagnetic.
  4. Square planar needs dsp2 (a vacant 3d orbital) – not possible with d10.

Short trick: d10 + 4 ligands ⇒ always tetrahedral and diamagnetic (e.g. [Ni(CO)4], [Zn(NH3)4]2+).

Answer: (B)

अवधारणा: [Ni(CO)4] में निकैल शून्य ऑक्सीकरण अवस्था में है; CO प्रबल क्षेत्र लिगन्ड है।

  1. Ni(0): [Ar]3d84s2; CO, 4s इलेक्ट्रॉनों को 3d में धकेल देता है ⇒ 3d104s0।
  2. चार CO रिक्त 4s + तीन 4p कक्षकों का उपयोग करते हैं ⇒ sp3 ⇒ चतुष्फलकीय।
  3. सभी इलेक्ट्रॉन युग्मित (3d10) ⇒ प्रतिचुंबकीय।
  4. वर्ग समतली के लिए dsp2 (एक रिक्त 3d कक्षक) चाहिए – d10 में संभव नहीं।

शॉर्ट ट्रिक: d10 + 4 लिगन्ड ⇒ सदैव चतुष्फलकीय और प्रतिचुंबकीय (जैसे [Ni(CO)4], [Zn(NH3)4]2+)।

उत्तर: (B)

NEET UGChemistryCoordination compounds – VBT of [Ni(CO)<sub>4</sub>]NEET UG 2018 · 6 May Shift 1
Q1594.
Following solutions were prepared by mixing different volumes of NaOH and HCl of different concentrations :
a. 60 mL M10 HCl + 40 mL M10 NaOH
b. 55 mL M10 HCl + 45 mL M10 NaOH
c. 75 mL M5 HCl + 25 mL M5 NaOH
d. 100 mL M10 HCl + 100 mL M10 NaOH
pH of which one of them will be equal to 1?
विभिन्न सांद्रताओं वाले NaOH और HCl के विभिन्न आयतनों को मिलाकर निम्नलिखित विलयन बनाए गए :
a. 60 mL M10 HCl + 40 mL M10 NaOH
b. 55 mL M10 HCl + 45 mL M10 NaOH
c. 75 mL M5 HCl + 25 mL M5 NaOH
d. 100 mL M10 HCl + 100 mL M10 NaOH
इनमें से किसका pH 1 के बराबर होगा?
  1. Ad
  2. Ba
  3. Cb
  4. Dc
Show answer

Concept: For a strong acid–strong base mixture: excess mmol of H+ ÷ total volume (mL) = [H+]; pH = −log[H+].

  1. a: HCl 60 × 0.1 = 6 mmol, NaOH 4 mmol ⇒ excess H+ = 2 mmol in 100 mL ⇒ 0.02 M ⇒ pH ≈ 1.7
  2. b: 5.5 − 4.5 = 1 mmol in 100 mL ⇒ 0.01 M ⇒ pH = 2
  3. c: HCl 75 × 0.2 = 15 mmol, NaOH 25 × 0.2 = 5 mmol ⇒ excess 10 mmol in 100 mL ⇒ [H+] = 0.1 M ⇒ pH = 1 ✔
  4. d: 10 mmol each ⇒ neutral ⇒ pH = 7

Short trick: pH 1 ⇒ [H+] = 0.1 M ⇒ in 100 mL you need 10 mmol excess acid: only c gives 15 − 5 = 10.

Answer: (D)

अवधारणा: प्रबल अम्ल–प्रबल क्षार मिश्रण में: H+ के आधिक्य mmol ÷ कुल आयतन (mL) = [H+]; pH = −log[H+]।

  1. a: HCl 60 × 0.1 = 6 mmol, NaOH 4 mmol ⇒ आधिक्य H+ = 2 mmol, 100 mL में ⇒ 0.02 M ⇒ pH ≈ 1.7
  2. b: 5.5 − 4.5 = 1 mmol, 100 mL में ⇒ 0.01 M ⇒ pH = 2
  3. c: HCl 75 × 0.2 = 15 mmol, NaOH 25 × 0.2 = 5 mmol ⇒ आधिक्य 10 mmol, 100 mL में ⇒ [H+] = 0.1 M ⇒ pH = 1 ✔
  4. d: दोनों 10 mmol ⇒ उदासीन ⇒ pH = 7

शॉर्ट ट्रिक: pH 1 ⇒ [H+] = 0.1 M ⇒ 100 mL में 10 mmol आधिक्य अम्ल चाहिए: केवल c में 15 − 5 = 10।

उत्तर: (D)

NEET UGChemistryIonic equilibrium – pH of acid–base mixturesNEET UG 2018 · 6 May Shift 1
Q1595.
On which of the following properties does the coagulating power of an ion depend?
किसी आयन की स्कंदन क्षमता निम्नलिखित में से किस गुण पर निर्भर करती है?
  1. ABoth magnitude and sign of the charge on the ionआयन पर आवेश के परिमाण और चिह्न दोनों पर
  2. BSize of the ion aloneकेवल आयन के आकार पर
  3. CThe magnitude of the charge on the ion aloneकेवल आयन पर आवेश के परिमाण पर
  4. DThe sign of charge on the ion aloneकेवल आयन पर आवेश के चिह्न पर
Show answer

Concept: Hardy–Schulze rule: the ion that coagulates a sol is the one carrying charge opposite to the colloidal particles (sign), and its coagulating power increases with its valency (magnitude).

  1. Negative sol (As2S3): Al3+ > Ba2+ > Na+.
  2. Positive sol (Fe(OH)3): [Fe(CN)6]4– > PO43– > SO42– > Cl–.
  3. So both the sign (must be opposite) and the magnitude (higher = stronger) matter; (B), (C), (D) each give only part of the rule.

Short trick: Hardy–Schulze = "opposite sign, higher charge, faster coagulation".

Answer: (A)

अवधारणा: हार्डी-शुल्ज़े नियम: सॉल का स्कंदन वह आयन करता है जिसका आवेश कोलॉइडी कणों के विपरीत हो (चिह्न), और उसकी स्कंदन क्षमता उसकी संयोजकता (परिमाण) के साथ बढ़ती है।

  1. ऋणात्मक सॉल (As2S3): Al3+ > Ba2+ > Na+।
  2. धनात्मक सॉल (Fe(OH)3): [Fe(CN)6]4– > PO43– > SO42– > Cl–।
  3. अतः चिह्न (विपरीत होना चाहिए) और परिमाण (अधिक = प्रबल) दोनों महत्त्वपूर्ण हैं; (B), (C), (D) प्रत्येक नियम का केवल एक भाग बताते हैं।

शॉर्ट ट्रिक: हार्डी-शुल्ज़े = "विपरीत चिह्न, अधिक आवेश, तीव्र स्कंदन"।

उत्तर: (A)

NEET UGChemistrySurface chemistry – coagulation (Hardy–Schulze rule)NEET UG 2018 · 6 May Shift 1
Q1596.
Given van der Waals constant for NH3, H2, O2 and CO2 are respectively 4.17, 0.244, 1.36 and 3.59, which one of the following gases is most easily liquefied?
NH3, H2, O2 और CO2 के वान्डरवाल्स स्थिरांक क्रमशः 4.17, 0.244, 1.36 और 3.59 दिए गए हैं, निम्नलिखित में से कौन-सी गैस सबसे आसानी से द्रवित होगी?
  1. AO2
  2. BH2
  3. CNH3
  4. DCO2
Show answer

Concept: van der Waals constant a measures intermolecular attraction; larger a ⇒ stronger attraction ⇒ higher critical temperature (Tc = 8a/27Rb) ⇒ easier liquefaction.

  1. a values: NH3 4.17 > CO2 3.59 > O2 1.36 > H2 0.244.
  2. Largest a ⇒ NH3 (also H-bonded) is most easily liquefied; H2 is the hardest.

Short trick: Liquefaction ease ∝ a (∝ Tc). Pick the biggest a.

Answer: (C)

अवधारणा: वान्डरवाल्स स्थिरांक a अंतराअणुक आकर्षण का माप है; अधिक a ⇒ प्रबल आकर्षण ⇒ उच्च क्रांतिक ताप (Tc = 8a/27Rb) ⇒ आसान द्रवण।

  1. a के मान: NH3 4.17 > CO2 3.59 > O2 1.36 > H2 0.244।
  2. सबसे अधिक a ⇒ NH3 (H-आबंधित भी) सबसे आसानी से द्रवित होती है; H2 सबसे कठिन।

शॉर्ट ट्रिक: द्रवण की सरलता ∝ a (∝ Tc)। सबसे बड़ा a चुनें।

उत्तर: (C)

NEET UGChemistryStates of matter – van der Waals constant aNEET UG 2018 · 6 May Shift 1
Q1597.
The solubility of BaSO4 in water is 2.42 × 10–3 gL–1 at 298 K. The value of its solubility product (Ksp) will be
(Given molar mass of BaSO4 = 233 g mol–1)
298 K पर जल में BaSO4 की विलेयता 2.42 × 10–3 gL–1 है। इसके विलेयता गुणनफल (Ksp) का मान होगा
(दिया है BaSO4 का मोलर द्रव्यमान = 233 g mol–1)
  1. A1.08 × 10–14 mol2L–2
  2. B1.08 × 10–12 mol2L–2
  3. C1.08 × 10–10 mol2L–2
  4. D1.08 × 10–8 mol2L–2
Show answer

Concept: For an AB-type salt, BaSO4(s) ⇌ Ba2+ + SO42–; Ksp = s2 (s in mol L–1).

  1. s = (2.42 × 10–3 g L–1) / (233 g mol–1) = 1.04 × 10–5 mol L–1
  2. Ksp = s2 = (1.04 × 10–5)2 = 1.08 × 10–10 mol2 L–2

Short trick: s ≈ 10–5 ⇒ Ksp ≈ 10–10; the mantissa 1.08 is common to all options, so only the power matters.

Answer: (C) 1.08 × 10–10 mol2 L–2

अवधारणा: AB प्रकार के लवण के लिए, BaSO4(s) ⇌ Ba2+ + SO42–; Ksp = s2 (s, mol L–1 में)।

  1. s = (2.42 × 10–3 g L–1) / (233 g mol–1) = 1.04 × 10–5 mol L–1
  2. Ksp = s2 = (1.04 × 10–5)2 = 1.08 × 10–10 mol2 L–2

शॉर्ट ट्रिक: s ≈ 10–5 ⇒ Ksp ≈ 10–10; 1.08 सभी विकल्पों में समान है, अतः केवल घातांक देखें।

उत्तर: (C) 1.08 × 10–10 mol2 L–2

NEET UGChemistryIonic equilibrium – solubility productNEET UG 2018 · 6 May Shift 1
Q1598.
In which case is number of molecules of water maximum?
किस स्थिति में जल के अणुओं की संख्या अधिकतम है?
  1. A0.00224 L of water vapours at 1 atm and 273 K1 atm और 273 K पर 0.00224 L जलवाष्प
  2. B0.18 g of water0.18 g जल
  3. C18 mL of water18 mL जल
  4. D10–3 mol of water10–3 mol जल
Show answer

Concept: Number of molecules = moles × NA; compare moles.

  1. (A) At STP 22.4 L = 1 mol ⇒ 0.00224/22.4 = 10–4 mol.
  2. (B) 0.18/18 = 10–2 mol.
  3. (C) 18 mL water (density 1 g mL–1) = 18 g = 1 mol ⇒ NA molecules (maximum).
  4. (D) 10–3 mol.

Short trick: Liquid water is ~1000 times denser than vapour – 18 mL of liquid is a full mole.

Answer: (C)

अवधारणा: अणुओं की संख्या = मोल × NA; मोलों की तुलना करें।

  1. (A) STP पर 22.4 L = 1 mol ⇒ 0.00224/22.4 = 10–4 mol।
  2. (B) 0.18/18 = 10–2 mol।
  3. (C) 18 mL जल (घनत्व 1 g mL–1) = 18 g = 1 mol ⇒ NA अणु (अधिकतम)।
  4. (D) 10–3 mol।

शॉर्ट ट्रिक: द्रव जल, वाष्प से लगभग 1000 गुना सघन है – 18 mL द्रव पूरा एक मोल है।

उत्तर: (C)

NEET UGChemistrySome basic concepts – mole conceptNEET UG 2018 · 6 May Shift 1
Q1599.
The correct difference between first and second order reactions is that
प्रथम और द्वितीय कोटि की अभिक्रियाओं के बीच सही अंतर यह है कि
  1. AA first-order reaction can catalyzed; a second-order reaction cannot be catalyzedप्रथम कोटि की अभिक्रिया उत्प्रेरित हो सकती है; द्वितीय कोटि की अभिक्रिया उत्प्रेरित नहीं हो सकती
  2. BThe half-life of a first-order reaction does not depend on [A]0; the half-life of a second-order reaction does depend on [A]0प्रथम कोटि की अभिक्रिया का अर्धायु काल [A]0 पर निर्भर नहीं करता; द्वितीय कोटि की अभिक्रिया का अर्धायु काल [A]0 पर निर्भर करता है
  3. CThe rate of a first-order reaction does not depend on reactant concentrations; the rate of a second-order reaction does depend on reactant concentrationsप्रथम कोटि की अभिक्रिया का वेग अभिकारक सांद्रताओं पर निर्भर नहीं करता; द्वितीय कोटि की अभिक्रिया का वेग अभिकारक सांद्रताओं पर निर्भर करता है
  4. DThe rate of a first-order reaction does depend on reactant concentrations; the rate of a second-order reaction does not depend on reactant concentrationsप्रथम कोटि की अभिक्रिया का वेग अभिकारक सांद्रताओं पर निर्भर करता है; द्वितीय कोटि की अभिक्रिया का वेग अभिकारक सांद्रताओं पर निर्भर नहीं करता
Show answer

Concept: Half-life: first order t1/2=0.693k (independent of [A]0); second order t1/2=1k[A]0 (depends on [A]0).

  1. (B) is exactly this difference ✔.
  2. (A) – reactions of any order can be catalysed ✘.
  3. (C), (D) – rates of both first-order (r = k[A]) and second-order (r = k[A]2) reactions depend on concentration ✘; only zero-order rate is concentration-independent.

Short trick: General rule: t1/2 ∝ [A]01−n ⇒ n = 1 gives no dependence; n = 2 gives t1/2 ∝ 1/[A]0.

Answer: (B)

अवधारणा: अर्धायु: प्रथम कोटि t1/2=0.693k ([A]0 से स्वतंत्र); द्वितीय कोटि t1/2=1k[A]0 ([A]0 पर निर्भर)।

  1. (B) ठीक यही अंतर है ✔।
  2. (A) – किसी भी कोटि की अभिक्रिया उत्प्रेरित हो सकती है ✘।
  3. (C), (D) – प्रथम कोटि (r = k[A]) और द्वितीय कोटि (r = k[A]2) दोनों के वेग सांद्रता पर निर्भर करते हैं ✘; केवल शून्य कोटि का वेग सांद्रता से स्वतंत्र होता है।

शॉर्ट ट्रिक: सामान्य नियम: t1/2 ∝ [A]01−n ⇒ n = 1 पर कोई निर्भरता नहीं; n = 2 पर t1/2 ∝ 1/[A]0।

उत्तर: (B)

NEET UGChemistryChemical kinetics – first vs second orderNEET UG 2018 · 6 May Shift 1
Q1600.
Among CaH2, BeH2, BaH2, the order of ionic character is
CaH2, BeH2, BaH2 में आयनिक गुण का क्रम है
  1. ABeH2 < BaH2 < CaH2
  2. BCaH2 < BeH2 < BaH2
  3. CBeH2 < CaH2 < BaH2
  4. DBaH2 < BeH2 < CaH2
Show answer

Concept: Down group 2, the cation gets larger and more electropositive (less polarising, Fajans rule) ⇒ hydrides become more ionic.

  1. BeH2: tiny Be2+, covalent polymeric hydride – least ionic.
  2. CaH2 is ionic (saline); BaH2, with the largest, most electropositive Ba, is the most ionic.
  3. Order: BeH2 < CaH2 < BaH2.

Short trick: Same anion, bigger cation ⇒ more ionic. Follow the group order Be → Ca → Ba.

Answer: (C)

अवधारणा: वर्ग 2 में नीचे जाने पर धनायन बड़ा और अधिक विद्युत-धनात्मक (कम ध्रुवणकारी, फ़ायान्स नियम) होता है ⇒ हाइड्राइड अधिक आयनिक होते जाते हैं।

  1. BeH2: अत्यंत छोटा Be2+, सहसंयोजी बहुलकी हाइड्राइड – न्यूनतम आयनिक।
  2. CaH2 आयनिक (लवणीय) है; BaH2 सबसे बड़े, सबसे विद्युत-धनात्मक Ba के कारण सर्वाधिक आयनिक है।
  3. क्रम: BeH2 < CaH2 < BaH2।

शॉर्ट ट्रिक: ऋणायन समान, धनायन बड़ा ⇒ अधिक आयनिक। वर्ग का क्रम Be → Ca → Ba अपनाएँ।

उत्तर: (C)

NEET UGChemistrys-Block – ionic character of hydridesNEET UG 2018 · 6 May Shift 1