JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

675 questions.

Q261.
A metal rod of length L rotates about one end at origin with a uniform angular velocity ω. The magnetic field radially falls off as B(r)=B0e−λr; λ being a positive constant. The emf induced (neglecting the centripetal force on electrons in the rod) is :
L लम्बाई की एक धातु की छड़ मूल बिन्दु पर स्थित अपने एक सिरे के परितः एकसमान कोणीय वेग ω से घूमती है। चुम्बकीय क्षेत्र त्रिज्यतः B(r)=B0e−λr के अनुसार घटता है; λ एक धनात्मक नियतांक है। प्रेरित विद्युत वाहक बल (छड़ में इलेक्ट्रॉनों पर अभिकेन्द्र बल की उपेक्षा करते हुए) है :
  1. AB0ω[1λ2−e−λL(1λ2+Lλ)]
  2. BB0ω[1λ2+e−λL(1λ2+Lλ)]
  3. CB0ω[4λ2−e−2λL(1λ2+2Lλ)]
  4. DB0ω[3λ2−e−3λL(3λ2+Lλ)]
Show answer

Concept: An element dr at distance r moves with speed ωr, so dε=B(r)ωrdr; integrate from 0 to L.

  1. ε=B0ω∫0Lre−λrdr.
  2. By parts: ∫re−λrdr=−e−λr(rλ+1λ2).
  3. ε=B0ω[1λ2−e−λL(1λ2+Lλ)].
  4. Check: λ→0 must give 12B0ωL2; (A) does, (B) blows up, (C) and (D) do not reduce correctly.

Short trick: At L=0 the emf must be zero — only (A) gives 1λ2−1λ2=0.

Answer: (A) B0ω[1λ2−e−λL(1λ2+Lλ)]

अवधारणा: दूरी r पर अल्पांश dr की चाल ωr है, अतः dε=B(r)ωrdr; 0 से L तक समाकलन कीजिए।

  1. ε=B0ω∫0Lre−λrdr।
  2. खण्डशः समाकलन: ∫re−λrdr=−e−λr(rλ+1λ2)।
  3. ε=B0ω[1λ2−e−λL(1λ2+Lλ)]।
  4. जाँच: λ→0 पर 12B0ωL2 आना चाहिए; (A) से आता है, (B) अनन्त हो जाता है, (C) तथा (D) सही रूप में नहीं घटते।

शॉर्ट ट्रिक: L=0 पर विद्युत वाहक बल शून्य होना चाहिए — केवल (A) में 1λ2−1λ2=0 आता है।

उत्तर: (A) B0ω[1λ2−e−λL(1λ2+Lλ)]

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – motional emf in rotating rodJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q262.
Under steady state condition the potential difference across the capacitor in the circuit is ________ V.
स्थायी अवस्था में परिपथ में संधारित्र के सिरों पर विभवान्तर ________ V है।
  1. A0.5
  2. B1.5
  3. C0
  4. D2
Show answer

Concept: In steady state no current flows through the capacitor branch, so the 4 Ω carries no current and the capacitor has the full potential difference between the two vertical (junction) wires.

  1. Current flows only in the loop: 2 V cell → 6 Ω → 2 Ω. I=26+2=0.25 A.
  2. P.d. between the junctions = p.d. across 2 Ω =0.25×2=0.5 V.
  3. No drop across 4 Ω ⇒ VC=0.5 V.

Short trick: Remove the capacitor branch; the 2 Ω and 6 Ω form a divider: V=2×28=0.5 V.

Answer: (A) 0.5

अवधारणा: स्थायी अवस्था में संधारित्र वाली शाखा में धारा नहीं बहती, अतः 4 Ω में धारा शून्य है और संधारित्र पर दोनों ऊर्ध्वाधर (संधि) तारों के बीच का पूरा विभवान्तर होता है।

  1. धारा केवल लूप में बहती है: 2 V सेल → 6 Ω → 2 Ω। I=26+2=0.25 A।
  2. संधियों के बीच विभवान्तर = 2 Ω पर विभवान्तर =0.25×2=0.5 V।
  3. 4 Ω पर कोई विभव पतन नहीं ⇒ VC=0.5 V।

शॉर्ट ट्रिक: संधारित्र शाखा हटा दीजिए; 2 Ω तथा 6 Ω विभव विभाजक बनाते हैं: V=2×28=0.5 V।

उत्तर: (A) 0.5

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsCapacitance – RC circuit in steady stateJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q263.
A particle of charge q and mass m is projected from origin with an initial velocity v→=(v02x^+v02y^). There exists a uniform magnetic field B→=B0z^ and a space varying electric field E→=E0e−λxx^ within the region 0≤x≤L. After travelling a distance such that x-coordinate has changed from x=0 to x=L, the change in the kinetic energy is ________.
आवेश q तथा द्रव्यमान m का एक कण मूल बिन्दु से प्रारम्भिक वेग v→=(v02x^+v02y^) से प्रक्षेपित किया जाता है। क्षेत्र 0≤x≤L में एकसमान चुम्बकीय क्षेत्र B→=B0z^ तथा स्थान के साथ परिवर्ती विद्युत क्षेत्र E→=E0e−λxx^ विद्यमान है। इतनी दूरी तय करने के बाद कि x-निर्देशांक x=0 से x=L तक बदल जाए, गतिज ऊर्जा में परिवर्तन ________ है।
  1. AqE0λ[1−e−λL]
  2. B(v0qB02λ)[2−e−2λL]
  3. CqE0λ[1+e−λL]
  4. Dq(E0+v0B0λ)[1−e−λL/2]
Show answer

Concept: The magnetic force qv→×B→ is always perpendicular to velocity and does no work; only the electric field changes KE (work-energy theorem).

  1. ΔK=∫0LqExdx=qE0∫0Le−λxdx.
  2. =qE0[−e−λxλ]0L=qE0λ(1−e−λL).
  3. (B) and (D) contain B0, but the magnetic field cannot change KE; (C) has the wrong sign (it does not vanish at L=0).

Short trick: Ignore B completely; ΔK=q×(potential drop) =q∫Edx.

Answer: (A) qE0λ[1−e−λL]

अवधारणा: चुम्बकीय बल qv→×B→ सदैव वेग के लम्बवत् होता है और कोई कार्य नहीं करता; केवल विद्युत क्षेत्र गतिज ऊर्जा बदलता है (कार्य-ऊर्जा प्रमेय)।

  1. ΔK=∫0LqExdx=qE0∫0Le−λxdx।
  2. =qE0[−e−λxλ]0L=qE0λ(1−e−λL)।
  3. (B) तथा (D) में B0 है, परन्तु चुम्बकीय क्षेत्र गतिज ऊर्जा नहीं बदल सकता; (C) में चिह्न गलत है (L=0 पर यह शून्य नहीं होता)।

शॉर्ट ट्रिक: B को पूरी तरह छोड़ दीजिए; ΔK=q×(विभव पतन) =q∫Edx।

उत्तर: (A) qE0λ[1−e−λL]

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMoving Charges – work-energy in E and B fieldsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q264.
Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The electromagnetic wave exerts pressure on the surface on which they are allowed to fall.
Reason (R) : There is no mass associated with the electromagnetic waves.
In the light of the above statements, choose the correct answer from the options given below :
नीचे दो कथन दिए गए हैं : एक को अभिकथन (A) तथा दूसरे को कारण (R) के रूप में चिह्नित किया गया है।
अभिकथन (A) : विद्युत चुम्बकीय तरंगें जिस पृष्ठ पर आपतित होती हैं, उस पर दाब आरोपित करती हैं।
कारण (R) : विद्युत चुम्बकीय तरंगों के साथ कोई द्रव्यमान सम्बद्ध नहीं होता।
उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :
  1. ABoth (A) and (R) are true and (R) is the correct explanation of (A)(A) तथा (R) दोनों सत्य हैं और (R), (A) की सही व्याख्या है
  2. BBoth (A) and (R) are true but (R) is not the correct explanation of (A)(A) तथा (R) दोनों सत्य हैं परन्तु (R), (A) की सही व्याख्या नहीं है
  3. C(A) is true but (R) is false(A) सत्य है परन्तु (R) असत्य है
  4. D(A) is false but (R) is true(A) असत्य है परन्तु (R) सत्य है
Show answer

Concept: EM waves carry energy U and momentum p=U/c; transfer of this momentum to a surface gives radiation pressure.

  1. (A) is true: intensity I falling normally on an absorbing surface exerts pressure I/c (and 2I/c on a perfect reflector).
  2. (R) is true: EM waves (photons) have zero rest mass.
  3. But the pressure arises from the momentum carried by the wave, not from the absence of mass — so (R) does not explain (A). Hence option (A) is wrong (wrong explanation), and options (C), (D) are wrong because both statements are true.

Short trick: Pressure ⇐ momentum; "no mass" is a true fact but not the cause.

Answer: (B) Both (A) and (R) are true but (R) is not the correct explanation of (A)

अवधारणा: विद्युत चुम्बकीय तरंगें ऊर्जा U तथा संवेग p=U/c ले जाती हैं; पृष्ठ को यह संवेग स्थानान्तरित होने से विकिरण दाब उत्पन्न होता है।

  1. (A) सत्य है: अवशोषक पृष्ठ पर लम्बवत् आपतित तीव्रता I, I/c दाब लगाती है (पूर्ण परावर्तक पर 2I/c)।
  2. (R) सत्य है: विद्युत चुम्बकीय तरंगों (फोटॉन) का विराम द्रव्यमान शून्य होता है।
  3. परन्तु दाब तरंग द्वारा ले जाए गए संवेग के कारण होता है, द्रव्यमान न होने के कारण नहीं — अतः (R), (A) की व्याख्या नहीं करता। इसलिए (A) विकल्प गलत (गलत व्याख्या), तथा (C), (D) गलत क्योंकि दोनों कथन सत्य हैं।

शॉर्ट ट्रिक: दाब ⇐ संवेग; "कोई द्रव्यमान नहीं" सत्य तथ्य है, परन्तु कारण नहीं।

उत्तर: (B) (A) तथा (R) दोनों सत्य हैं परन्तु (R), (A) की सही व्याख्या नहीं है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Waves – radiation pressureJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q265.
A thin convex lens and a thin concave lens are kept in contact and are co-axial. Which of the following statements is correct for this combination of two lenses ?
एक पतला उत्तल लेंस तथा एक पतला अवतल लेंस सम्पर्क में तथा समाक्षीय रखे गए हैं। दो लेंसों के इस संयोजन के लिए निम्नलिखित में से कौन-सा कथन सही है ?
  1. Abehaves as concave lens if |fconvex|>|fconcave|अवतल लेंस की भाँति व्यवहार करता है यदि |fconvex|>|fconcave|
  2. Bbehaves as concave lens if |fconvex|<|fconcave|अवतल लेंस की भाँति व्यवहार करता है यदि |fconvex|<|fconcave|
  3. Cbehaves as convex lens if |fconvex|>|fconcave|उत्तल लेंस की भाँति व्यवहार करता है यदि |fconvex|>|fconcave|
  4. DFocal length of the lens system will change if the positions of two lenses are interchangedयदि दोनों लेंसों की स्थितियाँ आपस में बदल दी जाएँ तो लेंस निकाय की फोकस दूरी बदल जाएगी
Show answer

Concept: For thin lenses in contact, P=P1+P2, i.e. 1F=1|fconvex|−1|fconcave|.

  1. If |fconvex|>|fconcave|, then 1|fconvex|<1|fconcave| ⇒ P<0 ⇒ the combination is diverging (concave). (A) is correct.
  2. (B): |fconvex|<|fconcave| gives P>0 ⇒ convex, not concave — wrong.
  3. (C): same condition as (A) gives a concave lens, not convex — wrong.
  4. (D): P1+P2 is symmetric, so interchanging the thin lenses in contact does not change F — wrong.

Short trick: The lens with the shorter focal length (stronger power) wins.

Answer: (A) behaves as concave lens if |fconvex|>|fconcave|

अवधारणा: सम्पर्क में रखे पतले लेंसों के लिए P=P1+P2, अर्थात् 1F=1|fconvex|−1|fconcave|।

  1. यदि |fconvex|>|fconcave|, तो 1|fconvex|<1|fconcave| ⇒ P<0 ⇒ संयोजन अपसारी (अवतल) है। (A) सही है।
  2. (B): |fconvex|<|fconcave| से P>0 ⇒ उत्तल, अवतल नहीं — गलत।
  3. (C): (A) वाली ही शर्त से अवतल लेंस बनता है, उत्तल नहीं — गलत।
  4. (D): P1+P2 सममित है, अतः सम्पर्क में रखे पतले लेंसों को आपस में बदलने से F नहीं बदलती — गलत।

शॉर्ट ट्रिक: छोटी फोकस दूरी (अधिक क्षमता) वाला लेंस "जीतता" है।

उत्तर: (A) अवतल लेंस की भाँति व्यवहार करता है यदि |fconvex|>|fconcave|

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – lenses in contactJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q266.
An object AB is placed 15 cm on the left of a convex lens P of focal length 10 cm. Another convex lens Q is now placed 15 cm right of lens P. If the focal length of lens Q is 15 cm, the final image is ________.
एक वस्तु AB, 10 cm फोकस दूरी वाले एक उत्तल लेंस P के बाईं ओर 15 cm पर रखी है। अब एक अन्य उत्तल लेंस Q को लेंस P के 15 cm दाईं ओर रखा जाता है। यदि लेंस Q की फोकस दूरी 15 cm है, तो अन्तिम प्रतिबिम्ब ________ है।
  1. Avirtual, formed at 7.5 cm right of lens Q, with a size bigger than that of ABआभासी, लेंस Q के 7.5 cm दाईं ओर बनता है, आकार AB से बड़ा
  2. Breal, formed at 7.5 cm right of lens Q, with a size same as that of ABवास्तविक, लेंस Q के 7.5 cm दाईं ओर बनता है, आकार AB के समान
  3. Cformed at infinity.अनन्त पर बनता है।
  4. Dreal, formed at 7 cm right of lens Q, with a size smaller than that of ABवास्तविक, लेंस Q के 7 cm दाईं ओर बनता है, आकार AB से छोटा
Show answer

Concept: Apply 1v−1u=1f lens by lens; the image of P acts as the object for Q; total magnification m=m1m2.

  1. Lens P: u=−15, f=+10 ⇒ 1v=110−115=130 ⇒ v=+30 cm; m1=30−15=−2.
  2. This image lies 30 − 15 = 15 cm to the right of Q ⇒ virtual object for Q: u=+15 cm.
  3. Lens Q: 1v=115+115=215 ⇒ v=+7.5 cm (real, right of Q); m2=7.515=0.5.
  4. m=(−2)(0.5)=−1 ⇒ real, inverted, same size as AB. (A) says virtual, (C) says infinity, (D) has wrong distance and size.

Short trick: Converging rays meeting a convex lens at its focal distance beyond it: v=f/2=7.5 cm, m2=12, cancelling m1=−2.

Answer: (B) real, formed at 7.5 cm right of lens Q, with a size same as that of AB

अवधारणा: प्रत्येक लेंस पर क्रमशः 1v−1u=1f लगाइए; P का प्रतिबिम्ब Q के लिए वस्तु है; कुल आवर्धन m=m1m2।

  1. लेंस P: u=−15, f=+10 ⇒ 1v=110−115=130 ⇒ v=+30 cm; m1=30−15=−2।
  2. यह प्रतिबिम्ब Q के 30 − 15 = 15 cm दाईं ओर है ⇒ Q के लिए आभासी वस्तु: u=+15 cm।
  3. लेंस Q: 1v=115+115=215 ⇒ v=+7.5 cm (Q के दाईं ओर, वास्तविक); m2=7.515=0.5।
  4. m=(−2)(0.5)=−1 ⇒ वास्तविक, उल्टा, AB के समान आकार। (A) आभासी कहता है, (C) अनन्त, (D) में दूरी व आकार गलत हैं।

शॉर्ट ट्रिक: उत्तल लेंस पर अभिसारी किरणें जो उसके आगे फोकस दूरी पर मिलतीं: v=f/2=7.5 cm, m2=12, जो m1=−2 को निरस्त करता है।

उत्तर: (B) वास्तविक, लेंस Q के 7.5 cm दाईं ओर बनता है, आकार AB के समान

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – two-lens systemJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q267.
The maximum intensity in a Young's double slit experiment is I0. Distance between the slits (d) is 5λ, where λ is the wavelength of light used. The intensity of the fringe, exactly opposite to one of the slits on the screen, placed at D=10d is ________.
यंग के द्विझिरी प्रयोग में अधिकतम तीव्रता I0 है। झिरियों के बीच की दूरी (d), 5λ है, जहाँ λ प्रयुक्त प्रकाश की तरंगदैर्ध्य है। D=10d पर रखे पर्दे पर किसी एक झिरी के ठीक सामने स्थित फ्रिंज की तीव्रता ________ है।
  1. AI04
  2. BI02
  3. CI0
  4. D3I04
Show answer

Concept: Path difference Δx=ydD; I=I0cos2⁡ϕ2 with ϕ=2πλΔx.

  1. Point opposite one slit: y=d2.
  2. Δx=(d/2)d10d=d20=5λ20=λ4.
  3. ϕ=2πλ⋅λ4=π2.
  4. I=I0cos2⁡π4=I02.

Short trick: Δx=d22D=d20=λ4 ⇒ quarter-wave ⇒ half intensity.

Answer: (B) I02

अवधारणा: पथान्तर Δx=ydD; I=I0cos2⁡ϕ2, जहाँ ϕ=2πλΔx।

  1. एक झिरी के सामने का बिन्दु: y=d2।
  2. Δx=(d/2)d10d=d20=5λ20=λ4।
  3. ϕ=2πλ⋅λ4=π2।
  4. I=I0cos2⁡π4=I02।

शॉर्ट ट्रिक: Δx=d22D=d20=λ4 ⇒ चौथाई तरंग ⇒ आधी तीव्रता।

उत्तर: (B) I02

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – Young's double slitJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q268.
An electron is travelling with a velocity v in free space and when it enters a medium, its velocity is reduced by 20%. The de Broglie wavelength of electron in the medium is αλ0, where λ0 is its de Broglie wavelength in free space. The value of α is ________.
एक इलेक्ट्रॉन मुक्त आकाश में वेग v से गतिमान है तथा किसी माध्यम में प्रवेश करने पर उसका वेग 20% कम हो जाता है। माध्यम में इलेक्ट्रॉन की दे ब्रॉग्ली तरंगदैर्ध्य αλ0 है, जहाँ λ0 मुक्त आकाश में उसकी दे ब्रॉग्ली तरंगदैर्ध्य है। α का मान ________ है।
  1. A1.20
  2. B1.0
  3. C1.25
  4. D0.75
Show answer

Concept: λ=hmv, so λ∝1v.

  1. New velocity =0.8v.
  2. λ=hm(0.8v)=λ00.8=1.25λ0.
  3. α=1.25.

Short trick: 20% less speed ⇒ wavelength × 5/4.

Answer: (C) 1.25

अवधारणा: λ=hmv, अतः λ∝1v।

  1. नया वेग =0.8v।
  2. λ=hm(0.8v)=λ00.8=1.25λ0।
  3. α=1.25।

शॉर्ट ट्रिक: चाल 20% कम ⇒ तरंगदैर्ध्य × 5/4।

उत्तर: (C) 1.25

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsDual Nature – de Broglie wavelengthJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q269.
Assuming the experimental mass of 612C as 12 u, the mass defect of 612C atom is ________ MeV/c2.
(Mass of proton = 1.00727 u, mass of neutron = 1.00866 u, 1 u = 931.5 MeV/c2 and c is the speed of the light in vacuum).
612C का प्रायोगिक द्रव्यमान 12 u मानते हुए, 612C परमाणु की द्रव्यमान क्षति ________ MeV/c2 है।
(प्रोटॉन का द्रव्यमान = 1.00727 u, न्यूट्रॉन का द्रव्यमान = 1.00866 u, 1 u = 931.5 MeV/c2 तथा c निर्वात में प्रकाश की चाल है)।
  1. A127.5
  2. B89.03
  3. C272.0
  4. D92.0
Show answer

Concept: Δm=Zmp+(A−Z)mn−M, converted with 1 u = 931.5 MeV/c2.

  1. 6mp=6×1.00727=6.04362 u; 6mn=6×1.00866=6.05196 u.
  2. Δm=6.04362+6.05196−12=0.09558 u.
  3. Δm=0.09558×931.5=89.03 MeV/c2.

Short trick: 6(mp+mn)=6×2.01593=12.09558 ⇒ excess 0.0956 u ≈ 89 MeV.

Answer: (B) 89.03

अवधारणा: Δm=Zmp+(A−Z)mn−M, तथा 1 u = 931.5 MeV/c2 से रूपान्तरण।

  1. 6mp=6×1.00727=6.04362 u; 6mn=6×1.00866=6.05196 u।
  2. Δm=6.04362+6.05196−12=0.09558 u।
  3. Δm=0.09558×931.5=89.03 MeV/c2।

शॉर्ट ट्रिक: 6(mp+mn)=6×2.01593=12.09558 ⇒ आधिक्य 0.0956 u ≈ 89 MeV।

उत्तर: (B) 89.03

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsNuclei – mass defectJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q270.
In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 1015 atoms/cm3 and 1018 atoms/cm3, respectively. Which one of the following statements is true ?
एक अर्धचालक p-n डायोड में p-पक्ष तथा n-पक्ष पर अपमिश्रण (doping) सान्द्रताएँ क्रमशः 1015 परमाणु/cm3 तथा 1018 परमाणु/cm3 हैं। निम्नलिखित में से कौन-सा एक कथन सत्य है ?
  1. AWidths of depletion region on either side of the interface are equalअन्तरापृष्ठ के दोनों ओर अवक्षय क्षेत्र की चौड़ाइयाँ बराबर होती हैं
  2. BThe depletion region width is more on p-side compared to that in n-siden-पक्ष की तुलना में p-पक्ष में अवक्षय क्षेत्र की चौड़ाई अधिक होती है
  3. CThe depletion region width is more on n-side compared to that in p-sidep-पक्ष की तुलना में n-पक्ष में अवक्षय क्षेत्र की चौड़ाई अधिक होती है
  4. DNo depletion region forms because of unequal doping concentrations on p and n-sidesp तथा n-पक्षों पर असमान अपमिश्रण सान्द्रताओं के कारण कोई अवक्षय क्षेत्र नहीं बनता
Show answer

Concept: Charge neutrality of the depletion layer: NAxp=NDxn, so the depletion width is inversely proportional to doping.

  1. xpxn=NDNA=10181015=1000.
  2. So the depletion region extends much more into the lightly doped p-side.
  3. (A) wrong — widths equal only for equal doping; (C) is the reverse; (D) wrong — a depletion region always forms at a p-n junction.

Short trick: Depletion region "leans" into the lightly doped side.

Answer: (B) The depletion region width is more on p-side compared to that in n-side

अवधारणा: अवक्षय परत की आवेश उदासीनता: NAxp=NDxn, अतः अवक्षय चौड़ाई अपमिश्रण के व्युत्क्रमानुपाती है।

  1. xpxn=NDNA=10181015=1000।
  2. अतः अवक्षय क्षेत्र कम अपमिश्रित p-पक्ष में कहीं अधिक फैलता है।
  3. (A) गलत — चौड़ाइयाँ केवल समान अपमिश्रण पर बराबर होती हैं; (C) उल्टा है; (D) गलत — p-n सन्धि पर अवक्षय क्षेत्र सदैव बनता है।

शॉर्ट ट्रिक: अवक्षय क्षेत्र कम अपमिश्रित पक्ष की ओर "झुकता" है।

उत्तर: (B) n-पक्ष की तुलना में p-पक्ष में अवक्षय क्षेत्र की चौड़ाई अधिक होती है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsSemiconductors – depletion regionJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q271.
A copper wire of length 3 m is stretched by 3 mm by applying an external force. The volume of the wire is 600×10−6 m3. The elastic potential energy stored in the wire in stretched condition would be ________ J.
(Given Young modulus of copper =1.1×1011 N/m2)
3 m लम्बाई के एक ताँबे के तार को बाह्य बल लगाकर 3 mm खींचा जाता है। तार का आयतन 600×10−6 m3 है। खिंची हुई अवस्था में तार में संचित प्रत्यास्थ स्थितिज ऊर्जा ________ J होगी।
(दिया है ताँबे का यंग प्रत्यास्थता गुणांक =1.1×1011 N/m2)
Show answer

Concept: Energy stored U=12×stress×strain×volume=12Y(strain)2V.

  1. Strain =3×10−33=10−3.
  2. U=12×1.1×1011×(10−3)2×600×10−6.
  3. U=0.55×1011×10−6×6×10−4=33 J.

Short trick: 12Yε2=5.5×104 J/m3; × 6×10−4 m3 = 33 J.

Answer: 33

अवधारणा: संचित ऊर्जा U=12×प्रतिबल×विकृति×आयतन=12Y(विकृति)2V।

  1. विकृति =3×10−33=10−3।
  2. U=12×1.1×1011×(10−3)2×600×10−6।
  3. U=0.55×1011×10−6×6×10−4=33 J।

शॉर्ट ट्रिक: 12Yε2=5.5×104 J/m3; × 6×10−4 m3 = 33 J।

उत्तर: 33

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsMechanical Properties of Solids – elastic energyJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q272.
The heat extracted out of x gram of water initially at 50 °C to cool it down to 0 °C is sufficient to evaporate (1000−x) gram of water also initially at 50 °C. The value of x (closest integer) is ________.
(Take latent heat of water 2256 kJ/kg. K, specific heat capacity of water 4200 J/kg. K)
प्रारम्भ में 50 °C पर स्थित x ग्राम जल को 0 °C तक ठण्डा करने के लिए निकाली गई ऊष्मा, प्रारम्भ में 50 °C पर ही स्थित (1000−x) ग्राम जल को वाष्पित करने के लिए पर्याप्त है। x का मान (निकटतम पूर्णांक) ________ है।
(जल की गुप्त ऊष्मा 2256 kJ/kg. K, जल की विशिष्ट ऊष्मा धारिता 4200 J/kg. K लीजिए)
Show answer

Concept: Heat lost by x g (50 °C → 0 °C) = heat to warm (1000−x) g from 50 °C to 100 °C and then vaporise it.

  1. Heat released =x×10−3×4200×50=210x J.
  2. Heat needed per gram =10−3(4200×50+2256×103)=210+2256=2466 J, so total =2466(1000−x) J.
  3. 210x=2466(1000−x) ⇒ 2676x=2466000 ⇒ x=921.52.
  4. Closest integer: x=922.

Short trick: x=1000×24662466+210=1000×24662676≈922.

Answer: 922

अवधारणा: x g द्वारा दी गई ऊष्मा (50 °C → 0 °C) = (1000−x) g को 50 °C से 100 °C तक गर्म करने तथा फिर वाष्पित करने में लगी ऊष्मा।

  1. दी गई ऊष्मा =x×10−3×4200×50=210x J।
  2. प्रति ग्राम आवश्यक ऊष्मा =10−3(4200×50+2256×103)=210+2256=2466 J, अतः कुल =2466(1000−x) J।
  3. 210x=2466(1000−x) ⇒ 2676x=2466000 ⇒ x=921.52।
  4. निकटतम पूर्णांक: x=922।

शॉर्ट ट्रिक: x=1000×24662466+210=1000×24662676≈922।

उत्तर: 922

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsThermal Properties – calorimetryJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q273.
A series LCR circuit with R=20 Ω, L=1.6 H and C=40 μF is connected to a variable frequency a.c. source. The inductive reactance at resonant frequency is ________ Ω.
R=20 Ω, L=1.6 H तथा C=40 μF वाला एक श्रेणी LCR परिपथ एक परिवर्ती आवृत्ति a.c. स्रोत से जुड़ा है। अनुनादी आवृत्ति पर प्रेरणिक प्रतिघात ________ Ω है।
Show answer

Concept: At resonance ω0=1LC and XL=ω0L=L/C.

  1. LC=1.6×40×10−6=6.4×10−5 s2 ⇒ LC=8×10−3 s.
  2. ω0=18×10−3=125 rad/s.
  3. XL=125×1.6=200 Ω (R plays no role).

Short trick: XL=L/C=1.6/(4×10−5)=40000=200 Ω.

Answer: 200

अवधारणा: अनुनाद पर ω0=1LC तथा XL=ω0L=L/C।

  1. LC=1.6×40×10−6=6.4×10−5 s2 ⇒ LC=8×10−3 s।
  2. ω0=18×10−3=125 rad/s।
  3. XL=125×1.6=200 Ω (R की कोई भूमिका नहीं)।

शॉर्ट ट्रिक: XL=L/C=1.6/(4×10−5)=40000=200 Ω।

उत्तर: 200

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsAlternating Current – resonanceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q274.
When an external resistance of 5 Ω is connected across terminals of a cell, a current of 0.25 A flows through it. When the 5 Ω resistor is replaced by a 2 Ω resistor, a current of 0.5 A flows through it. The internal resistance of the cell is ________ Ω.
जब किसी सेल के टर्मिनलों के बीच 5 Ω का बाह्य प्रतिरोध जोड़ा जाता है, तो उसमें 0.25 A धारा बहती है। जब 5 Ω प्रतिरोधक को 2 Ω प्रतिरोधक से प्रतिस्थापित किया जाता है, तो उसमें 0.5 A धारा बहती है। सेल का आन्तरिक प्रतिरोध ________ Ω है।
Show answer

Concept: E=I(R+r) is the same in both cases.

  1. E=0.25(5+r) and E=0.5(2+r).
  2. 1.25+0.25r=1+0.5r ⇒ 0.25r=0.25 ⇒ r=1 Ω.
  3. (Check: E=0.25×6=1.5 V =0.5×3 ✓)

Short trick: r=I1R1−I2R2I2−I1=1.25−10.25=1 Ω.

Answer: 1

अवधारणा: दोनों स्थितियों में E=I(R+r) समान है।

  1. E=0.25(5+r) तथा E=0.5(2+r)।
  2. 1.25+0.25r=1+0.5r ⇒ 0.25r=0.25 ⇒ r=1 Ω।
  3. (जाँच: E=0.25×6=1.5 V =0.5×3 ✓)

शॉर्ट ट्रिक: r=I1R1−I2R2I2−I1=1.25−10.25=1 Ω।

उत्तर: 1

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsCurrent Electricity – internal resistanceJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q275.
A circular loop of radius 20 cm and resistance 2 Ω is placed in a time varying magnetic field B→=(2t2+2t+3) T. At t=0, for the plane of the loop being perpendicular to the magnetic field and, the induced current in the loop at t=3 s is α50 A. The value of α is ________.
(Take π=22/7)
20 cm त्रिज्या तथा 2 Ω प्रतिरोध वाला एक वृत्ताकार लूप समय के साथ परिवर्ती चुम्बकीय क्षेत्र B→=(2t2+2t+3) T में रखा है। t=0 पर लूप का तल चुम्बकीय क्षेत्र के लम्बवत् है, तथा t=3 s पर लूप में प्रेरित धारा α50 A है। α का मान ________ है।
(π=22/7 लीजिए)
Show answer

Concept: ε=AdBdt (field perpendicular to the plane), I=ε/R.

  1. dBdt=4t+2; at t=3 s: 14 T/s.
  2. A=πr2=227×(0.2)2=227×0.04 m2.
  3. ε=227×0.04×14=1.76 V.
  4. I=1.762=0.88 A =α50 ⇒ α=0.88×50=44.

Short trick: 227×14=44; ε=44×0.04, I=44×0.02=4450 ⇒ α=44.

Answer: 44

अवधारणा: ε=AdBdt (क्षेत्र तल के लम्बवत्), I=ε/R।

  1. dBdt=4t+2; t=3 s पर: 14 T/s।
  2. A=πr2=227×(0.2)2=227×0.04 m2।
  3. ε=227×0.04×14=1.76 V।
  4. I=1.762=0.88 A =α50 ⇒ α=0.88×50=44।

शॉर्ट ट्रिक: 227×14=44; ε=44×0.04, I=44×0.02=4450 ⇒ α=44।

उत्तर: 44

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – Faraday's lawJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q276.

What volume of hydrogen gas at STP would be liberated by action of 50 mL of H2SO4 of 50% purity (density = 1.3 g mL−1) on 20 g of zinc ?

Given : Molar mass of H, O, S, Zn are 1, 16, 32, 65 g mol−1 respectively.

50% शुद्धता (घनत्व = 1.3 g mL−1) वाले 50 mL H2SO4 की 20 g जिंक पर क्रिया द्वारा STP पर कितने आयतन की हाइड्रोजन गैस मुक्त होगी ?

दिया है : H, O, S, Zn के मोलर द्रव्यमान क्रमशः 1, 16, 32, 65 g mol−1 हैं।

  1. A5.824 L
  2. B7.428 L
  3. C6.892 L
  4. D8.375 L
Show answer

Concept: Zn + H2SO4 → ZnSO4 + H2 (1 : 1 : 1). Find the limiting reagent; 1 mol gas at STP = 22.4 L.

  1. Mass of acid solution = 50 × 1.3 = 65 g; pure H2SO4 = 50% of 65 = 32.5 g = 32.598=0.332 mol.
  2. Moles of Zn = 2065=0.3077 mol → Zn is the limiting reagent.
  3. Moles of H2 = 0.3077 mol; volume = 0.3077×22.4=6.892 L.

Short trick: Zn (0.308 mol) < acid (0.332 mol), so V = (20/65) × 22.4.

Answer: (C) 6.892 L

अवधारणा: Zn + H2SO4 → ZnSO4 + H2 (1 : 1 : 1)। सीमांत अभिकर्मक ज्ञात कीजिए; STP पर 1 मोल गैस = 22.4 L।

  1. अम्ल विलयन का द्रव्यमान = 50 × 1.3 = 65 g; शुद्ध H2SO4 = 65 का 50% = 32.5 g = 32.598=0.332 मोल।
  2. Zn के मोल = 2065=0.3077 मोल → Zn सीमांत अभिकर्मक है।
  3. H2 के मोल = 0.3077 मोल; आयतन = 0.3077×22.4=6.892 L।

शॉर्ट ट्रिक: Zn (0.308 मोल) < अम्ल (0.332 मोल), अतः V = (20/65) × 22.4।

उत्तर: (C) 6.892 L

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryMole Concept – limiting reagentJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q277.

Which of the following statement(s) is/are true ?

A. If two orbitals have the same value of (n + l), the orbital with lower value of n will have lower energy.
B. Energies of the orbitals in the same subshell increase with increase in atomic number.
C. The size of 2px orbital is less than the size of 3px orbital.
D. Among 5f, 6s, 4d, 5p and 5d orbitals, none of the orbitals have 2 radial nodes.

Choose the correct answer from the options given below :

निम्नलिखित में से कौन-सा/से कथन सत्य है/हैं ?

A. यदि दो कक्षकों के लिए (n + l) का मान समान हो, तो n के कम मान वाले कक्षक की ऊर्जा कम होगी।
B. समान उपकोश (subshell) के कक्षकों की ऊर्जा परमाणु क्रमांक बढ़ने के साथ बढ़ती है।
C. 2px कक्षक का आकार 3px कक्षक के आकार से कम है।
D. 5f, 6s, 4d, 5p तथा 5d कक्षकों में से किसी भी कक्षक में 2 त्रिज्य नोड (radial nodes) नहीं हैं।

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

  1. AA, B and C onlyकेवल A, B तथा C
  2. BA and C onlyकेवल A तथा C
  3. CC and D onlyकेवल C तथा D
  4. DA onlyकेवल A
Show answer

Concept: (n + l) rule; effective nuclear charge; radial nodes = n − l − 1.

  1. A – true: for equal (n + l), the orbital with lower n is filled first (lower energy), e.g. 3d < 4p.
  2. B – false: as atomic number increases, Zeff increases, so energies of orbitals of the same subshell decrease.
  3. C – true: size increases with n, so 2px < 3px.
  4. D – false: radial nodes = n − l − 1 → 5f: 1, 6s: 5, 4d: 1, 5p: 3, 5d: 2. The 5d orbital has 2 radial nodes.
  5. True statements: A and C only. (A) includes false B; (C) includes false D; (D) misses C.

Short trick: n − l − 1 = 2 for 5d (5 − 2 − 1) kills D at once.

Answer: (B) A and C only

अवधारणा: (n + l) नियम; प्रभावी नाभिकीय आवेश; त्रिज्य नोड = n − l − 1।

  1. A – सत्य: समान (n + l) होने पर कम n वाला कक्षक पहले भरता है (कम ऊर्जा), जैसे 3d < 4p।
  2. B – असत्य: परमाणु क्रमांक बढ़ने पर Zeff बढ़ता है, अतः समान उपकोश के कक्षकों की ऊर्जा घटती है।
  3. C – सत्य: n बढ़ने पर आकार बढ़ता है, अतः 2px < 3px।
  4. D – असत्य: त्रिज्य नोड = n − l − 1 → 5f: 1, 6s: 5, 4d: 1, 5p: 3, 5d: 2। 5d कक्षक में 2 त्रिज्य नोड हैं।
  5. सत्य कथन: केवल A तथा C। (A) में असत्य B है; (C) में असत्य D है; (D) में C छूट गया है।

शॉर्ट ट्रिक: 5d के लिए n − l − 1 = 5 − 2 − 1 = 2, इससे D तुरंत असत्य।

उत्तर: (B) केवल A तथा C

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAtomic Structure – orbitals and nodesJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q278.

The covalent radii of atoms A and B are rA and rB, respectively. The covalent bond length and total length of AB molecule are respectively

परमाणुओं A तथा B की सहसंयोजक त्रिज्याएँ क्रमशः rA तथा rB हैं। AB अणु की सहसंयोजक आबंध लंबाई तथा कुल लंबाई क्रमशः हैं

  1. A(rA+rB), 2(rA+rB)
  2. B12(rA+rB), (rA+rB)
  3. C(rA+rB), (rA+rB)
  4. D2(rA+rB), 12(rA+rB)
Show answer

Concept: Covalent radius = distance from the nucleus to the middle of the bond; the bond length is nucleus-to-nucleus distance.

  1. Bond length of A–B = rA + rB (nucleus of A to nucleus of B).
  2. Total length of the molecule runs from the outer edge of A to the outer edge of B: rA (outer half of A) + rA + rB (bond) + rB (outer half of B) = 2(rA + rB).
  3. (B) halves the bond length, (C) ignores the outer radii, (D) reverses the two quantities.

Short trick: Picture two touching spheres: centre-to-centre = rA + rB, end-to-end = 2rA + 2rB.

Answer: (A) (rA + rB), 2(rA + rB)

अवधारणा: सहसंयोजक त्रिज्या = नाभिक से आबंध के मध्य तक की दूरी; आबंध लंबाई = नाभिक से नाभिक की दूरी।

  1. A–B की आबंध लंबाई = rA + rB (A के नाभिक से B के नाभिक तक)।
  2. अणु की कुल लंबाई A के बाहरी सिरे से B के बाहरी सिरे तक होती है: rA (A का बाहरी भाग) + rA + rB (आबंध) + rB (B का बाहरी भाग) = 2(rA + rB)।
  3. (B) आबंध लंबाई को आधा कर देता है, (C) बाहरी त्रिज्याओं को छोड़ देता है, (D) दोनों राशियों को उलट देता है।

शॉर्ट ट्रिक: दो स्पर्श करते गोलों की कल्पना कीजिए: केंद्र से केंद्र = rA + rB, सिरे से सिरा = 2rA + 2rB।

उत्तर: (A) (rA + rB), 2(rA + rB)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryChemical Bonding – covalent radius and bond lengthJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q279.

Consider the following data for the reaction

X2(g) + Y2(g) ⇌ 2XY(g)

at 600 K. The ΔrG⊖ (in kJ mol−1) for the reaction is :

CompoundΔfH⊖600K (kJ mol−1)S⊖600K (J mol−1 K−1)
XY(g)42200
X2(g)8140
Y2(g)80250

अभिक्रिया

X2(g) + Y2(g) ⇌ 2XY(g)

के लिए 600 K पर निम्नलिखित आँकड़ों पर विचार कीजिए। अभिक्रिया के लिए ΔrG⊖ (kJ mol−1 में) है :

यौगिकΔfH⊖600K (kJ mol−1)S⊖600K (J mol−1 K−1)
XY(g)42200
X2(g)8140
Y2(g)80250
  1. A−21000
  2. B−10
  3. C−1000
  4. D−9.012
Show answer

Concept: ΔrG⊖ = ΔrH⊖ − TΔrS⊖, with ΔrX = ΣX(products) − ΣX(reactants).

  1. ΔrH⊖ = 2(42) − (8 + 80) = −4 kJ mol−1.
  2. ΔrS⊖ = 2(200) − (140 + 250) = +10 J mol−1 K−1 = 0.010 kJ mol−1 K−1.
  3. ΔrG⊖ = −4 − 600 × 0.010 = −4 − 6 = −10 kJ mol−1.

Short trick: Convert ΔS to kJ before multiplying by T; −1000 or −21000 come from forgetting this.

Answer: (B) −10

अवधारणा: ΔrG⊖ = ΔrH⊖ − TΔrS⊖, जहाँ ΔrX = ΣX(उत्पाद) − ΣX(अभिकारक)।

  1. ΔrH⊖ = 2(42) − (8 + 80) = −4 kJ mol−1।
  2. ΔrS⊖ = 2(200) − (140 + 250) = +10 J mol−1 K−1 = 0.010 kJ mol−1 K−1।
  3. ΔrG⊖ = −4 − 600 × 0.010 = −4 − 6 = −10 kJ mol−1।

शॉर्ट ट्रिक: T से गुणा करने से पहले ΔS को kJ में बदलिए; −1000 या −21000 इसी भूल से आते हैं।

उत्तर: (B) −10

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – Gibbs energyJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2
Q280.

The correct order of molar heat capacities measured at 298 K and 1 bar is :

298 K तथा 1 bar पर मापी गई मोलर ऊष्माधारिताओं का सही क्रम है :

  1. ACopper(s) > Bromine(l) > Helium(g)कॉपर(s) > ब्रोमीन(l) > हीलियम(g)
  2. BBromine(l) > Copper(s) > Helium(g)ब्रोमीन(l) > कॉपर(s) > हीलियम(g)
  3. CHelium(g) > Bromine(l) > Copper(s)हीलियम(g) > ब्रोमीन(l) > कॉपर(s)
  4. DHelium(g) > Bromine(l) = Copper(s)हीलियम(g) > ब्रोमीन(l) = कॉपर(s)
Show answer

Concept: Molar heat capacity grows with the number of ways a substance can store energy (translation, rotation, vibration, intermolecular interactions).

  1. He(g), monatomic: only translation → Cp,m = 52R≈20.8 J K−1 mol−1.
  2. Cu(s): lattice vibrations (Dulong–Petit) → about 3R ≈ 24.4 J K−1 mol−1.
  3. Br2(l): diatomic molecules with rotation, vibration and strong intermolecular forces in the liquid → about 75.7 J K−1 mol−1.
  4. Order: Br2(l) > Cu(s) > He(g).

Short trick: Liquid of a polyatomic molecule ≫ metal (~3R) > monatomic gas (2.5R).

Answer: (B) Bromine(l) > Copper(s) > Helium(g)

अवधारणा: मोलर ऊष्माधारिता, पदार्थ द्वारा ऊर्जा संचित करने के तरीकों (स्थानांतरण, घूर्णन, कंपन, अंतराणुक अन्योन्यक्रिया) की संख्या के साथ बढ़ती है।

  1. He(g), एकपरमाणुक: केवल स्थानांतरण → Cp,m = 52R≈20.8 J K−1 mol−1।
  2. Cu(s): जालक कंपन (ड्यूलॉन्ग–पेटिट) → लगभग 3R ≈ 24.4 J K−1 mol−1।
  3. Br2(l): घूर्णन, कंपन तथा द्रव में प्रबल अंतराणुक बलों वाले द्विपरमाणुक अणु → लगभग 75.7 J K−1 mol−1।
  4. क्रम: Br2(l) > Cu(s) > He(g)।

शॉर्ट ट्रिक: बहुपरमाणुक अणु का द्रव ≫ धातु (~3R) > एकपरमाणुक गैस (2.5R)।

उत्तर: (B) ब्रोमीन(l) > कॉपर(s) > हीलियम(g)

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – molar heat capacityJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 5 Apr Shift 2