JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) · 750 questions

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

750 questions.

Q401.
During the transition of electron from state A to state C of a Bohr atom, the wavelength of emitted radiation is 2000 Å and it becomes 6000 Å when the electron jumps from state B to state C. Then the wavelength of the radiation emitted during the transition of electrons from state A to state B is
बोर परमाणु में इलेक्ट्रॉन के अवस्था A से अवस्था C में संक्रमण के दौरान उत्सर्जित विकिरण की तरंगदैर्घ्य 2000 Å है तथा इलेक्ट्रॉन के अवस्था B से अवस्था C में कूदने पर यह 6000 Å हो जाती है। तब इलेक्ट्रॉनों के अवस्था A से अवस्था B में संक्रमण के दौरान उत्सर्जित विकिरण की तरंगदैर्घ्य है
  1. A4000 Å
  2. B2000 Å
  3. C3000 Å
  4. D6000 Å
Show answer

Concept: Energy conservation in transitions: EAC=EAB+EBC, and E=hcλ, so 1λAC=1λAB+1λBC.

  1. 1λAB=12000−16000=3−16000=26000 (in Å−1)
  2. λAB=3000 Å

Short trick: λAB=λACλBCλBC−λAC=2000×60004000=3000 Å.

Answer: (C) 3000 Å

अवधारणा: संक्रमणों में ऊर्जा संरक्षण: EAC=EAB+EBC तथा E=hcλ, अतः 1λAC=1λAB+1λBC।

  1. 1λAB=12000−16000=3−16000=26000 (Å−1 में)
  2. λAB=3000 Å

शॉर्ट ट्रिक: λAB=λACλBCλBC−λAC=2000×60004000=3000 Å।

उत्तर: (C) 3000 Å

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsAtomic Physics – Bohr modelJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q402.
Consider the following statements:
A. The junction area of solar cell is made very narrow compared to a photo diode.
B. Solar cells are not connected with any external bias.
C. LED is made of lightly doped p-n junction.
D. Increase of forward current results in continuous increase of LED light intensity.
E. LEDs have to be connected in forward bias for emission of light.
Choose the correct answer from the options given below:
निम्नलिखित कथनों पर विचार कीजिए:
A. सौर सेल (solar cell) का संधि क्षेत्रफल, फोटो डायोड की तुलना में बहुत संकीर्ण बनाया जाता है।
B. सौर सेलों को किसी बाह्य बायस (bias) से नहीं जोड़ा जाता है।
C. LED हल्के अपमिश्रित (lightly doped) p-n संधि से बनाई जाती है।
D. अग्र धारा बढ़ाने से LED के प्रकाश की तीव्रता में निरंतर वृद्धि होती है।
E. प्रकाश उत्सर्जन के लिए LED को अग्र बायस में जोड़ना होता है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AB, E Onlyकेवल B, E
  2. BB, D, E Onlyकेवल B, D, E
  3. CA, C Onlyकेवल A, C
  4. DA, C, E Onlyकेवल A, C, E
Show answer

Concept: Working features of solar cells and LEDs.

  1. A is wrong: a solar cell is given a large junction area so that it can intercept more light – not a narrow one.
  2. B is correct: a solar cell generates its own emf from incident light; no external bias is applied.
  3. C is wrong: an LED uses a heavily doped p-n junction so that recombination of injected carriers gives light.
  4. D is wrong: the intensity first increases with forward current, reaches a maximum and then decreases – it does not increase continuously.
  5. E is correct: light is emitted only in forward bias, when carriers are injected across the junction and recombine.

Answer: (A) B, E Only

अवधारणा: सौर सेल तथा LED की कार्यप्रणाली।

  1. A गलत है: सौर सेल का संधि क्षेत्रफल बड़ा रखा जाता है ताकि अधिक प्रकाश ग्रहण हो – संकीर्ण नहीं।
  2. B सही है: सौर सेल आपतित प्रकाश से स्वयं विद्युत वाहक बल उत्पन्न करता है; कोई बाह्य बायस नहीं लगाया जाता।
  3. C गलत है: LED में अत्यधिक अपमिश्रित p-n संधि प्रयुक्त होती है जिससे अंतःक्षेपित वाहकों के पुनर्योजन से प्रकाश मिले।
  4. D गलत है: अग्र धारा बढ़ाने पर तीव्रता पहले बढ़ती है, अधिकतम होकर फिर घटती है – निरंतर नहीं बढ़ती।
  5. E सही है: प्रकाश केवल अग्र बायस में उत्सर्जित होता है, जब वाहक संधि पार कर पुनर्योजित होते हैं।

उत्तर: (A) केवल B, E

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsSemiconductor Devices – solar cell and LEDJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q403.
An alternating current is given by I=IAsin⁡ωt+IBcos⁡ωt. The r.m.s current will be
एक प्रत्यावर्ती धारा I=IAsin⁡ωt+IBcos⁡ωt द्वारा दी जाती है। वर्ग माध्य मूल (r.m.s) धारा होगी
  1. A|IA+IB|2
  2. BIA2+IB22
  3. CIA2+IB2
  4. DIA2+IB22
Show answer

Concept: The sum of a sine and a cosine of the same frequency is a single sinusoid of amplitude I0=IA2+IB2; for any sinusoid Irms=I02.

  1. I=IAsin⁡ωt+IBcos⁡ωt=IA2+IB2sin⁡(ωt+ϕ), where tan⁡ϕ=IBIA.
  2. Irms=IA2+IB22=IA2+IB22

Answer: (B) IA2+IB22

अवधारणा: समान आवृत्ति की sine और cosine का योग, आयाम I0=IA2+IB2 वाली एकल ज्यावक्रीय धारा होती है; किसी भी ज्यावक्रीय धारा के लिए Irms=I02।

  1. I=IAsin⁡ωt+IBcos⁡ωt=IA2+IB2sin⁡(ωt+ϕ), जहाँ tan⁡ϕ=IBIA।
  2. Irms=IA2+IB22=IA2+IB22

उत्तर: (B) IA2+IB22

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsAlternating Current – rms valueJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q404.
A car of mass 'm' moves on a banked road having radius 'r' and banking angle θ. To avoid slipping from banked road, the maximum permissible speed of the car is v0. The coefficient of friction μ between the wheels of the car and the banked road is
'm' द्रव्यमान की एक कार, 'r' त्रिज्या तथा θ बंकन कोण वाली ढालू (बंकित) सड़क पर चलती है। बंकित सड़क से फिसलने से बचने के लिए कार की अधिकतम अनुमेय चाल v0 है। कार के पहियों और बंकित सड़क के बीच घर्षण गुणांक μ है
  1. Aμ=v02+rgtan⁡θrg+v02tan⁡θ
  2. Bμ=v02−rgtan⁡θrg−v02tan⁡θ
  3. Cμ=v02−rgtan⁡θrg+v02tan⁡θ
  4. Dμ=v02+rgtan⁡θrg−v02tan⁡θ
Show answer

Concept: At the maximum speed on a banked road, friction acts down the incline and vmax2=rgtan⁡θ+μ1−μtan⁡θ.

  1. Put vmax=v0: v02(1−μtan⁡θ)=rg(tan⁡θ+μ)
  2. v02−rgtan⁡θ=μ(rg+v02tan⁡θ)
  3. μ=v02−rgtan⁡θrg+v02tan⁡θ

Short trick: With μ=0 the formula must reduce to v02=rgtan⁡θ – only option (C) does.

Answer: (C) μ=v02−rgtan⁡θrg+v02tan⁡θ

अवधारणा: बंकित सड़क पर अधिकतम चाल पर घर्षण ढाल के अनुदिश नीचे की ओर लगता है और vmax2=rgtan⁡θ+μ1−μtan⁡θ।

  1. vmax=v0 रखने पर: v02(1−μtan⁡θ)=rg(tan⁡θ+μ)
  2. v02−rgtan⁡θ=μ(rg+v02tan⁡θ)
  3. μ=v02−rgtan⁡θrg+v02tan⁡θ

शॉर्ट ट्रिक: μ=0 रखने पर सूत्र v02=rgtan⁡θ पर आना चाहिए – केवल विकल्प (C) में ऐसा होता है।

उत्तर: (C) μ=v02−rgtan⁡θrg+v02tan⁡θ

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsLaws of Motion – banking of roadsJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q405.
A satellite is launched into a circular orbit of radius 'R' around the earth. A second satellite is launched into an orbit of radius 1.03R. The time period of revolution of the second satellite is larger than the first one approximately by
एक उपग्रह पृथ्वी के चारों ओर 'R' त्रिज्या की वृत्तीय कक्षा में प्रक्षेपित किया जाता है। दूसरा उपग्रह 1.03R त्रिज्या की कक्षा में प्रक्षेपित किया जाता है। दूसरे उपग्रह का परिक्रमण काल, पहले उपग्रह से लगभग जितना अधिक है, वह है
  1. A9%
  2. B3%
  3. C4.5%
  4. D2.5%
Show answer

Concept: Kepler's third law: T2∝R3, so for small changes ΔTT=32ΔRR.

  1. ΔRR=0.03=3%
  2. ΔTT=32×3%=4.5%

Answer: (C) 4.5%

अवधारणा: केप्लर का तृतीय नियम: T2∝R3, अतः छोटे परिवर्तनों के लिए ΔTT=32ΔRR।

  1. ΔRR=0.03=3%
  2. ΔTT=32×3%=4.5%

उत्तर: (C) 4.5%

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsGravitation – Kepler's third lawJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q406.
An ideal gas goes from an initial state to final state. During the process, the pressure of gas increases linearly with temperature.
A. The work done by gas during the process is zero.
B. The heat added to gas is different from change in its internal energy.
C. The volume of the gas is increased.
D. The internal energy of the gas is increased.
E. The process is isochoric (constant volume process)
Choose the correct answer from the options given below:
एक आदर्श गैस प्रारंभिक अवस्था से अंतिम अवस्था में जाती है। इस प्रक्रम के दौरान गैस का दाब, ताप के साथ रैखिकतः (एकघाततः) बढ़ता है।
A. प्रक्रम के दौरान गैस द्वारा किया गया कार्य शून्य है।
B. गैस को दी गई ऊष्मा, इसकी आंतरिक ऊर्जा में परिवर्तन से भिन्न है।
C. गैस का आयतन बढ़ जाता है।
D. गैस की आंतरिक ऊर्जा बढ़ जाती है।
E. यह प्रक्रम समआयतनिक (नियत आयतन प्रक्रम) है।
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AE Onlyकेवल E
  2. BA, B, C, D Onlyकेवल A, B, C, D
  3. CA, D, E Onlyकेवल A, D, E
  4. DA, C Onlyकेवल A, C
Show answer

Concept: For an ideal gas PV=nRT. If P∝T throughout, then V=nRTP stays constant – the process is isochoric.

  1. E correct: P∝T with PV=nRT gives constant V.
  2. A correct: W=∫PdV=0 since dV=0.
  3. B wrong: with W=0, first law gives Q=ΔU – heat added equals the change in internal energy.
  4. C wrong: the volume does not change.
  5. D correct: pressure (hence temperature) increases, so ΔU=nCVΔT>0.

Answer: (C) A, D, E Only

अवधारणा: आदर्श गैस के लिए PV=nRT। यदि पूरे प्रक्रम में P∝T है, तो V=nRTP नियत रहता है – प्रक्रम समआयतनिक है।

  1. E सही: P∝T तथा PV=nRT से V नियत।
  2. A सही: dV=0 होने से W=∫PdV=0।
  3. B गलत: W=0 होने पर ऊष्मागतिकी के प्रथम नियम से Q=ΔU – दी गई ऊष्मा आंतरिक ऊर्जा के परिवर्तन के बराबर है।
  4. C गलत: आयतन नहीं बदलता।
  5. D सही: दाब (अतः ताप) बढ़ता है, इसलिए ΔU=nCVΔT>0।

उत्तर: (C) केवल A, D, E

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsThermodynamics – isochoric processJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q407.
An electron of mass 'm' with an initial velocity v→=v0i^(v0>0) enters an electric field E→=−E0k^. If the initial de Broglie wavelength is λ0, the value after time t would be
'm' द्रव्यमान का एक इलेक्ट्रॉन, प्रारंभिक वेग v→=v0i^(v0>0) से विद्युत क्षेत्र E→=−E0k^ में प्रवेश करता है। यदि प्रारंभिक डी-ब्रॉग्ली तरंगदैर्घ्य λ0 है, तो समय t के पश्चात् इसका मान होगा
  1. Aλ01+e2E02t2m2v02
  2. Bλ01+e2E02t2m2v02
  3. Cλ01−e2E02t2m2v02
  4. Dλ0
Show answer

Concept: λ=hmv; a field perpendicular to the motion adds a velocity component, increasing speed and decreasing λ.

  1. Force on the electron: F→=(−e)(−E0k^)=eE0k^, so vz=eE0tm while vx=v0 is unchanged.
  2. Speed: v=v02+e2E02t2m2=v01+e2E02t2m2v02
  3. λ=hmv=λ01+e2E02t2m2v02

Answer: (A) λ01+e2E02t2m2v02

अवधारणा: λ=hmv; गति के लंबवत क्षेत्र वेग का एक घटक जोड़ता है, जिससे चाल बढ़ती है और λ घटती है।

  1. इलेक्ट्रॉन पर बल: F→=(−e)(−E0k^)=eE0k^, अतः vz=eE0tm जबकि vx=v0 अपरिवर्तित रहता है।
  2. चाल: v=v02+e2E02t2m2=v01+e2E02t2m2v02
  3. λ=hmv=λ01+e2E02t2m2v02

उत्तर: (A) λ01+e2E02t2m2v02

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsDual Nature of Matter – de Broglie wavelengthJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q408.
What is the relative decrease in focal length of a lens for an increase in optical power by 0.1 D from 2.5 D? ['D' stands for dioptre]
किसी लेंस की प्रकाशिक क्षमता (optical power) के 2.5 D से 0.1 D बढ़ने पर उसकी फोकस दूरी में आपेक्षिक कमी क्या है? ['D' डायोप्टर के लिए है]
  1. A0.01
  2. B0.04
  3. C0.40
  4. D0.1
Show answer

Concept: f=1P, so Δff=−ΔPP for small changes.

  1. Relative decrease in focal length =ΔPP=0.12.5=0.04
  2. Check: f1=12.5=0.4 m, f2=12.6≈0.3846 m; 0.4−0.38460.4≈0.04.

Answer: (B) 0.04

अवधारणा: f=1P, अतः छोटे परिवर्तनों के लिए Δff=−ΔPP।

  1. फोकस दूरी में आपेक्षिक कमी =ΔPP=0.12.5=0.04
  2. जाँच: f1=12.5=0.4 m, f2=12.6≈0.3846 m; 0.4−0.38460.4≈0.04।

उत्तर: (B) 0.04

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – power of a lensJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q409.
A force F=α+βx2 acts on an object in the x-direction. The work done by the force is 5 J when the object is displaced by 1 m. If the constant α=1 N then β will be
किसी वस्तु पर x-दिशा में एक बल F=α+βx2 कार्य करता है। वस्तु के 1 m विस्थापित होने पर बल द्वारा किया गया कार्य 5 J है। यदि नियतांक α=1 N हो, तो β होगा
  1. A15 N/m2
  2. B12 N/m2
  3. C8 N/m2
  4. D10 N/m2
Show answer

Concept: Work by a variable force: W=∫0xFdx.

  1. W=∫01(α+βx2)dx=α+β3
  2. 5=1+β3⇒β=12 N/m2

Answer: (B) 12 N/m2

अवधारणा: परिवर्ती बल द्वारा कार्य: W=∫0xFdx।

  1. W=∫01(α+βx2)dx=α+β3
  2. 5=1+β3⇒β=12 N/m2

उत्तर: (B) 12 N/m2

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsWork, Energy and Power – work by a variable forceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q410.
A thin plano convex lens made of glass of refractive index 1.5 is immersed in a liquid of refractive index 1.2. When the plane side of the lens is silver coated for complete reflection, the lens immersed in the liquid behaves like a concave mirror of focal length 0.2 m. The radius of curvature of the curved surface of the lens is
1.5 अपवर्तनांक के काँच से बना एक पतला समतल-उत्तल लेंस, 1.2 अपवर्तनांक के द्रव में डुबोया गया है। लेंस के समतल पृष्ठ पर पूर्ण परावर्तन हेतु चाँदी की परत (silver coating) चढ़ाने पर, द्रव में डूबा यह लेंस 0.2 m फोकस दूरी के अवतल दर्पण की भाँति व्यवहार करता है। लेंस के वक्र पृष्ठ की वक्रता त्रिज्या है
  1. A0.20 m
  2. B0.25 m
  3. C0.15 m
  4. D0.10 m
Show answer

Concept: A silvered lens acts as a mirror with 1feq=2flens+1fmirror; for a silvered plane surface fmirror=∞.

  1. In the liquid, relative refractive index =1.51.2=1.25, so 1flens=(1.25−1)1R=0.25R.
  2. 1feq=2×0.25R=0.5R, i.e. feq=2R.
  3. 2R=0.2 m⇒R=0.10 m

Answer: (D) 0.10 m

अवधारणा: रजतित लेंस एक दर्पण की तरह कार्य करता है: 1feq=2flens+1fmirror; रजतित समतल पृष्ठ के लिए fmirror=∞।

  1. द्रव में आपेक्षिक अपवर्तनांक =1.51.2=1.25, अतः 1flens=(1.25−1)1R=0.25R।
  2. 1feq=2×0.25R=0.5R, अर्थात् feq=2R।
  3. 2R=0.2 m⇒R=0.10 m

उत्तर: (D) 0.10 m

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – silvered lensJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q411.
A particle is executing simple harmonic motion with time period 2 s and amplitude 1 cm. If D and d are the total distance and displacement covered by the particle in 12.5 s, then Dd is
एक कण 2 s आवर्तकाल तथा 1 cm आयाम से सरल आवर्त गति कर रहा है। यदि कण द्वारा 12.5 s में तय की गई कुल दूरी D तथा विस्थापन d है, तो Dd है
  1. A165
  2. B10
  3. C154
  4. D25
Show answer

Concept: In one full period the particle covers distance 4A with zero displacement; in a quarter period starting from the mean position it covers distance A with displacement A.

  1. 12.5 s=6T+T4 (as T=2 s).
  2. Distance: D=6(4A)+A=25A=25 cm.
  3. Displacement: after 6T the particle is back at the start; in the next T4 it moves from mean to extreme, so d=A=1 cm.
  4. Dd=25

Answer: (D) 25

अवधारणा: एक पूर्ण आवर्तकाल में कण 4A दूरी तय करता है और विस्थापन शून्य होता है; माध्य स्थिति से प्रारंभ कर चौथाई आवर्तकाल में दूरी A तथा विस्थापन A होता है।

  1. 12.5 s=6T+T4 (क्योंकि T=2 s)।
  2. दूरी: D=6(4A)+A=25A=25 cm।
  3. विस्थापन: 6T के बाद कण प्रारंभिक बिंदु पर लौट आता है; अगले T4 में वह माध्य से चरम स्थिति तक जाता है, अतः d=A=1 cm।
  4. Dd=25

उत्तर: (D) 25

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsOscillations – distance and displacement in SHMJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q412.
The amount of work done to break a big water drop of radius 'R' into 27 small drops of equal radius is 10 J. The work done required to break the same big drop into 64 small drops of equal radius will be
'R' त्रिज्या की एक बड़ी जल की बूँद को समान त्रिज्या की 27 छोटी बूँदों में तोड़ने में किया गया कार्य 10 J है। उसी बड़ी बूँद को समान त्रिज्या की 64 छोटी बूँदों में तोड़ने के लिए आवश्यक कार्य होगा
  1. A15 J
  2. B5 J
  3. C20 J
  4. D10 J
Show answer

Concept: Work done = surface tension × increase in surface area. Breaking into n equal drops: W=4πR2T(n1/3−1).

  1. For n=27: W1=4πR2T(3−1)=8πR2T=10 J, so 4πR2T=5 J.
  2. For n=64: W2=4πR2T(4−1)=3×5=15 J.

Short trick: W2W1=641/3−1271/3−1=32⇒W2=15 J.

Answer: (A) 15 J

अवधारणा: किया गया कार्य = पृष्ठ तनाव × पृष्ठीय क्षेत्रफल में वृद्धि। n समान बूँदों में तोड़ने पर: W=4πR2T(n1/3−1)।

  1. n=27 के लिए: W1=4πR2T(3−1)=8πR2T=10 J, अतः 4πR2T=5 J।
  2. n=64 के लिए: W2=4πR2T(4−1)=3×5=15 J।

शॉर्ट ट्रिक: W2W1=641/3−1271/3−1=32⇒W2=15 J।

उत्तर: (A) 15 J

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsMechanical Properties of Fluids – surface energyJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q413.
A plano-convex lens having radius of curvature of first surface 2 cm exhibits focal length of f1 in air. Another plano-convex lens with first surface radius of curvature 3 cm has focal length of f2 when it is immersed in a liquid of refractive index 1.2. If both the lenses are made of same glass of refractive index 1.5, the ratio of f1 and f2 will be
प्रथम पृष्ठ की वक्रता त्रिज्या 2 cm वाले एक समतल-उत्तल लेंस की वायु में फोकस दूरी f1 है। प्रथम पृष्ठ की वक्रता त्रिज्या 3 cm वाले एक अन्य समतल-उत्तल लेंस की, 1.2 अपवर्तनांक के द्रव में डुबोने पर, फोकस दूरी f2 है। यदि दोनों लेंस 1.5 अपवर्तनांक के एक ही काँच के बने हों, तो f1 तथा f2 का अनुपात होगा
  1. A1 : 2
  2. B1 : 3
  3. C3 : 5
  4. D2 : 3
Show answer

Concept: Lens maker's formula: 1f=(μlensμmedium−1)(1R1−1R2); for a plano-convex lens 1R1−1R2=1R.

  1. In air: 1f1=(1.5−1)12=14⇒f1=4 cm.
  2. In liquid: 1f2=(1.51.2−1)13=0.253=112⇒f2=12 cm.
  3. f1:f2=4:12=1:3

Answer: (B) 1 : 3

अवधारणा: लेंस-मेकर सूत्र: 1f=(μlensμmedium−1)(1R1−1R2); समतल-उत्तल लेंस के लिए 1R1−1R2=1R।

  1. वायु में: 1f1=(1.5−1)12=14⇒f1=4 cm।
  2. द्रव में: 1f2=(1.51.2−1)13=0.253=112⇒f2=12 cm।
  3. f1:f2=4:12=1:3

उत्तर: (B) 1 : 3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – lens maker's formulaJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q414.
An air bubble of radius 0.1 cm lies at a depth of 20 cm below the free surface of a liquid of density 1000 kg/m3. If the pressure inside the bubble is 2100 N/m2 greater than the atmospheric pressure, then the surface tension of the liquid in SI unit is (use g=10 m/s2)
1000 kg/m3 घनत्व के द्रव के मुक्त पृष्ठ से 20 cm गहराई पर 0.1 cm त्रिज्या का एक वायु का बुलबुला स्थित है। यदि बुलबुले के भीतर का दाब, वायुमंडलीय दाब से 2100 N/m2 अधिक है, तो SI मात्रक में द्रव का पृष्ठ तनाव है (g=10 m/s2 लीजिए)
  1. A0.1
  2. B0.05
  3. C0.02
  4. D0.25
Show answer

Concept: For an air bubble inside a liquid (one surface): Pin=P0+ρgh+2Tr.

  1. Pin−P0=2100 N/m2, ρgh=1000×10×0.20=2000 N/m2.
  2. 2Tr=2100−2000=100 N/m2
  3. T=100×0.0012=0.05 N/m

Answer: (B) 0.05

अवधारणा: द्रव के भीतर वायु के बुलबुले (एक ही पृष्ठ) के लिए: Pin=P0+ρgh+2Tr।

  1. Pin−P0=2100 N/m2, ρgh=1000×10×0.20=2000 N/m2।
  2. 2Tr=2100−2000=100 N/m2
  3. T=100×0.0012=0.05 N/m

उत्तर: (B) 0.05

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsMechanical Properties of Fluids – excess pressure in a bubbleJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q415.
A uniform solid cylinder of mass 'm' and radius 'r' rolls along an inclined rough plane of inclination 45∘. If it starts to roll from rest from the top of the plane then the linear acceleration of the cylinder's axis will be
'm' द्रव्यमान तथा 'r' त्रिज्या का एक समरूप ठोस बेलन 45∘ झुकाव वाले खुरदरे नत तल पर लुढ़कता है। यदि यह तल के शीर्ष से विरामावस्था से लुढ़कना प्रारंभ करता है, तो बेलन की अक्ष का रैखिक त्वरण होगा
  1. A12g
  2. B132g
  3. C2g3
  4. D2g
Show answer

Concept: For rolling without slipping down an incline: a=gsin⁡θ1+Imr2; for a solid cylinder I=12mr2.

  1. a=gsin⁡45∘1+12=g/23/2
  2. a=2g32=2g3

Answer: (C) 2g3

अवधारणा: नत तल पर बिना फिसले लुढ़कने के लिए: a=gsin⁡θ1+Imr2; ठोस बेलन के लिए I=12mr2।

  1. a=gsin⁡45∘1+12=g/23/2
  2. a=2g32=2g3

उत्तर: (C) 2g3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRotational Motion – rolling on an inclineJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q416.
The Young's double slit interference experiment is performed using light consisting of 480 nm and 600 nm wavelengths to form interference patterns. The least number of the bright fringes of 480 nm light that are required for the first coincidence with the bright fringes formed by 600 nm light is
यंग के द्विझिरी व्यतिकरण प्रयोग में व्यतिकरण पैटर्न बनाने के लिए 480 nm तथा 600 nm तरंगदैर्घ्यों वाले प्रकाश का उपयोग किया जाता है। 600 nm के प्रकाश द्वारा बनी दीप्त फ्रिंजों के साथ प्रथम संपाती होने के लिए 480 nm के प्रकाश की दीप्त फ्रिंजों की आवश्यक न्यूनतम संख्या है
  1. A5
  2. B4
  3. C6
  4. D8
Show answer

Concept: Bright fringes coincide where n1λ1=n2λ2.

  1. n1n2=λ2λ1=600480=54
  2. The first coincidence occurs at n1=5 (480 nm) and n2=4 (600 nm), since 5×480=4×600=2400 nm.

Answer: (A) 5

अवधारणा: दीप्त फ्रिंजें वहाँ संपाती होती हैं जहाँ n1λ1=n2λ2।

  1. n1n2=λ2λ1=600480=54
  2. प्रथम संपात n1=5 (480 nm) तथा n2=4 (600 nm) पर होता है, क्योंकि 5×480=4×600=2400 nm।

उत्तर: (A) 5

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – Young's double slit experimentJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q417.
A parallel plate capacitor was made with two rectangular plates, each with a length of l=3 cm and breath of b=1 cm. The distance between the plates is 3 μm. Out of the following, which are the ways to increase the capacitance by a factor of 10?
A. l=30 cm, b=1 cm, d=1μm
B. l=3 cm, b=1 cm, d=30μm
C. l=6 cm, b=5 cm, d=3μm
D. l=1 cm, b=1 cm, d=10μm
E. l=5 cm, b=2 cm, d=1μm
Choose the correct answer from the options given below:
दो आयताकार पट्टिकाओं, प्रत्येक की लंबाई l=3 cm तथा चौड़ाई b=1 cm, से एक समांतर पट्टिका संधारित्र बनाया गया। पट्टिकाओं के बीच की दूरी 3 μm है। निम्नलिखित में से धारिता को 10 गुना बढ़ाने के तरीके कौन-से हैं?
A. l=30 cm, b=1 cm, d=1μm
B. l=3 cm, b=1 cm, d=30μm
C. l=6 cm, b=5 cm, d=3μm
D. l=1 cm, b=1 cm, d=10μm
E. l=5 cm, b=2 cm, d=1μm
नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:
  1. AA onlyकेवल A
  2. BC onlyकेवल C
  3. CB and D onlyकेवल B और D
  4. DC and E onlyकेवल C और E
Show answer

Concept: C=ε0lbd, so C∝lbd. Original value of lbd=3×13=1 (cm2/μm); we need 10.

  1. A: 30×11=30 – capacitance becomes 30 times, not 10. Wrong.
  2. B: 3×130=0.1 – capacitance decreases. Wrong.
  3. C: 6×53=10 – exactly 10 times. Correct.
  4. D: 1×110=0.1 – decreases. Wrong.
  5. E: 5×21=10 – exactly 10 times. Correct.

Answer: (D) C and E only

अवधारणा: C=ε0lbd, अतः C∝lbd। मूल मान lbd=3×13=1 (cm2/μm); हमें 10 चाहिए।

  1. A: 30×11=30 – धारिता 30 गुना हो जाती है, 10 नहीं। गलत।
  2. B: 3×130=0.1 – धारिता घट जाती है। गलत।
  3. C: 6×53=10 – ठीक 10 गुना। सही।
  4. D: 1×110=0.1 – घट जाती है। गलत।
  5. E: 5×21=10 – ठीक 10 गुना। सही।

उत्तर: (D) केवल C और E

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectrostatic Potential and Capacitance – parallel plate capacitorJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q418.
Consider a parallel plate capacitor of area A (of each plate) and separation 'd' between the plates. If E is the electric field and ε0 is the permittivity of free space between the plates, then potential energy stored in the capacitor is
A क्षेत्रफल (प्रत्येक पट्टिका का) तथा पट्टिकाओं के बीच 'd' पृथकन वाले एक समांतर पट्टिका संधारित्र पर विचार कीजिए। यदि पट्टिकाओं के बीच विद्युत क्षेत्र E तथा मुक्त आकाश की विद्युतशीलता ε0 हो, तो संधारित्र में संचित स्थितिज ऊर्जा है
  1. Aε0E2Ad
  2. B12ε0E2Ad
  3. C14ε0E2Ad
  4. D34ε0E2Ad
Show answer

Concept: Energy density of the electric field: u=12ε0E2; total energy = energy density × volume between the plates.

  1. Volume between plates =Ad.
  2. U=12ε0E2×Ad=12ε0E2Ad

Answer: (B) 12ε0E2Ad

अवधारणा: विद्युत क्षेत्र का ऊर्जा घनत्व: u=12ε0E2; कुल ऊर्जा = ऊर्जा घनत्व × पट्टिकाओं के बीच का आयतन।

  1. पट्टिकाओं के बीच का आयतन =Ad।
  2. U=12ε0E2×Ad=12ε0E2Ad

उत्तर: (B) 12ε0E2Ad

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectrostatic Potential and Capacitance – energy storedJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q419.
An object of mass 'm' is projected from origin in a vertical xy plane at an angle 45∘ with the x axis with an initial velocity v0. The magnitude and direction of the angular momentum of the object with respect to origin, when it reaches at the maximum height, will be [g is acceleration due to gravity]
'm' द्रव्यमान की एक वस्तु मूलबिंदु से ऊर्ध्वाधर xy तल में x अक्ष से 45∘ कोण पर प्रारंभिक वेग v0 से प्रक्षेपित की जाती है। अधिकतम ऊँचाई पर पहुँचने पर, मूलबिंदु के सापेक्ष वस्तु के कोणीय संवेग का परिमाण तथा दिशा होगी [g गुरुत्वीय त्वरण है]
  1. Amv0322g along negative z-axismv0322g ऋणात्मक z-अक्ष के अनुदिश
  2. Bmv0342g along positive z-axismv0342g धनात्मक z-अक्ष के अनुदिश
  3. Cmv0342g along negative z-axismv0342g ऋणात्मक z-अक्ष के अनुदिश
  4. Dmv0322g along positive z-axismv0322g धनात्मक z-अक्ष के अनुदिश
Show answer

Concept: L→=r→×mv→. At the top of the trajectory the velocity is horizontal: vx=v0cos⁡45∘, and the height is h=v02sin2⁡45∘2g.

  1. vx=v02, h=v024g.
  2. |L|=mvxh=m⋅v02⋅v024g=mv0342g
  3. Direction: Lz=xpy−ypx=0−h(mvx)<0, i.e. along the negative z-axis.

Answer: (C) mv0342g along negative z-axis

अवधारणा: L→=r→×mv→। प्रक्षेप-पथ के शीर्ष पर वेग क्षैतिज होता है: vx=v0cos⁡45∘, तथा ऊँचाई h=v02sin2⁡45∘2g।

  1. vx=v02, h=v024g।
  2. |L|=mvxh=m⋅v02⋅v024g=mv0342g
  3. दिशा: Lz=xpy−ypx=0−h(mvx)<0, अर्थात् ऋणात्मक z-अक्ष के अनुदिश।

उत्तर: (C) mv0342g ऋणात्मक z-अक्ष के अनुदिश

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRotational Motion – angular momentum of a projectileJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1
Q420.
For an experimental expression y=32.3×112527.4, where all the digits are significant. Then to report the value of y we should write
एक प्रायोगिक व्यंजक y=32.3×112527.4 के लिए, जहाँ सभी अंक सार्थक हैं। तब y का मान रिपोर्ट करने के लिए हमें लिखना चाहिए
  1. Ay=1326.19
  2. By=1330
  3. Cy=1326.186
  4. Dy=1326.2
Show answer

Concept: In multiplication and division the result must be reported with as many significant figures as the quantity having the least significant figures.

  1. 32.3 has 3 significant figures, 1125 has 4, 27.4 has 3 → result must have 3 significant figures.
  2. y=32.3×112527.4=1326.186…
  3. Rounded to 3 significant figures: y=1330.

Answer: (B) y=1330

अवधारणा: गुणा और भाग में परिणाम उतने ही सार्थक अंकों में रिपोर्ट किया जाता है जितने सबसे कम सार्थक अंकों वाली राशि में होते हैं।

  1. 32.3 में 3 सार्थक अंक, 1125 में 4, 27.4 में 3 → परिणाम में 3 सार्थक अंक होने चाहिए।
  2. y=32.3×112527.4=1326.186…
  3. 3 सार्थक अंकों तक पूर्णांकित: y=1330।

उत्तर: (B) y=1330

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsUnits and Measurements – significant figuresJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 24 Jan Shift 1