JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) · 675 questions

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

675 questions.

Q201.

An oxide of iron contains 69.9% iron, its empirical formula, is:

(Given : Molar mass of Fe and O are 56 and 16 g mol−1 respectively.)

आयरन के एक ऑक्साइड में 69.9% आयरन है, इसका मूलानुपाती सूत्र (empirical formula) है:

(दिया है : Fe तथा O के मोलर द्रव्यमान क्रमशः 56 तथा 16 g mol−1 हैं।)

  1. AFeO
  2. BFe2O3
  3. CFe3O4
  4. DFeO3
Show answer

Concept: Convert mass % to moles and take the simplest whole-number ratio.

  1. In 100 g: Fe = 69.9 g, O = 30.1 g.
  2. mol Fe = 69.956=1.248; mol O = 30.116=1.881.
  3. Ratio O : Fe = 1.8811.248=1.51≈1.5, so Fe : O = 2 : 3 → Fe2O3.
  4. Check: %Fe in Fe2O3 = 112160×100=70%; FeO gives 77.8%, Fe3O4 72.4%, FeO3 53.8%.

Short trick: Remember %Fe: FeO 78, Fe3O4 72, Fe2O3 70.

Answer: (B) Fe2O3

अवधारणा: द्रव्यमान % को मोल में बदलकर सरलतम पूर्णांक अनुपात लीजिए।

  1. 100 g में: Fe = 69.9 g, O = 30.1 g।
  2. Fe के मोल = 69.956=1.248; O के मोल = 30.116=1.881।
  3. अनुपात O : Fe = 1.8811.248=1.51≈1.5, अतः Fe : O = 2 : 3 → Fe2O3।
  4. जाँच: Fe2O3 में %Fe = 112160×100=70%; FeO में 77.8%, Fe3O4 में 72.4%, FeO3 में 53.8%।

शॉर्ट ट्रिक: %Fe याद रखें: FeO 78, Fe3O4 72, Fe2O3 70।

उत्तर: (B) Fe2O3

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryMole Concept – empirical formulaJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q202.

If shortest wavelength of hydrogen atom in Lyman series is x, then longest wavelength in Balmer series of He+ is:

यदि हाइड्रोजन परमाणु की लाइमन श्रेणी (Lyman series) में लघुतम तरंगदैर्ध्य x है, तो He+ की बामर श्रेणी (Balmer series) में दीर्घतम तरंगदैर्ध्य है:

  1. A9x5
  2. B36x5
  3. Cx4
  4. D5x9
Show answer

Concept: 1λ=RZ2(1n12−1n22).

  1. Shortest Lyman line of H: n1=1, n2=∞ → 1x=R.
  2. Longest Balmer line of He+ (Z = 2): n1=2, n2=3 → 1λ=4R(14−19)=5R9.
  3. λ=95R=9x5.

Short trick: Balmer longest for H is 36/(5R); dividing by Z2 = 4 gives 9/(5R).

Answer: (A) 9x5

अवधारणा: 1λ=RZ2(1n12−1n22)।

  1. H की लाइमन श्रेणी की लघुतम रेखा: n1=1, n2=∞ → 1x=R।
  2. He+ (Z = 2) की बामर श्रेणी की दीर्घतम रेखा: n1=2, n2=3 → 1λ=4R(14−19)=5R9।
  3. λ=95R=9x5।

शॉर्ट ट्रिक: H के लिए बामर दीर्घतम 36/(5R) है; Z2 = 4 से भाग देने पर 9/(5R)।

उत्तर: (A) 9x5

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAtomic Structure – hydrogen spectrumJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q203.

Match the LIST-I with LIST-II

List-I
Orbital
List-II
Radial nodes and nodal plane
A.2sI.1 Radial node + two nodal planes
B.3sII.1 Radial node + one nodal plane
C.3pIII.2 Radial nodes + No nodal plane
D.4dIV.1 Radial node + No nodal plane

Choose the correct answer from the options given below:

सूची-I का सूची-II से मिलान कीजिए

सूची-I
कक्षक
सूची-II
त्रिज्य नोड (radial node) तथा नोडल तल
A.2sI.1 त्रिज्य नोड + दो नोडल तल
B.3sII.1 त्रिज्य नोड + एक नोडल तल
C.3pIII.2 त्रिज्य नोड + कोई नोडल तल नहीं
D.4dIV.1 त्रिज्य नोड + कोई नोडल तल नहीं

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA-IV, B-I, C-III, D-II
  2. BA-IV, B-II, C-III, D-I
  3. CA-III, B-I, C-IV, D-II
  4. DA-IV, B-III, C-II, D-I
Show answer

Concept: Radial nodes = n − l − 1; nodal planes (angular nodes) = l.

  1. 2s: 2 − 0 − 1 = 1 radial, 0 planes → IV.
  2. 3s: 3 − 0 − 1 = 2 radial, 0 planes → III.
  3. 3p: 3 − 1 − 1 = 1 radial, 1 plane → II.
  4. 4d: 4 − 2 − 1 = 1 radial, 2 planes → I.
  5. (A), (B) and (C) wrongly pair 3s or 3p (e.g. B-I gives 3s two planes, impossible for l = 0).

Short trick: s-orbitals never have nodal planes, so B must be III and A must be IV – only (D) fits.

Answer: (D) A-IV, B-III, C-II, D-I

अवधारणा: त्रिज्य नोड = n − l − 1; नोडल तल (कोणीय नोड) = l।

  1. 2s: 2 − 0 − 1 = 1 त्रिज्य, 0 तल → IV।
  2. 3s: 3 − 0 − 1 = 2 त्रिज्य, 0 तल → III।
  3. 3p: 3 − 1 − 1 = 1 त्रिज्य, 1 तल → II।
  4. 4d: 4 − 2 − 1 = 1 त्रिज्य, 2 तल → I।
  5. (A), (B) तथा (C) में 3s या 3p का गलत मिलान है (जैसे B-I में 3s के दो तल, जो l = 0 के लिए असंभव है)।

शॉर्ट ट्रिक: s-कक्षकों में कभी नोडल तल नहीं होता, अतः B = III तथा A = IV – केवल (D) उपयुक्त है।

उत्तर: (D) A-IV, B-III, C-II, D-I

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAtomic Structure – nodes of orbitalsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q204.

The pairs among

A = [SO32−, CO32−], B = [O22−, F2], C = [CN−, CO], D = [NH3, H3O+] and E = [MnO42−, CrO42−] that do not have similar Lewis dot structure are

युग्मों

A = [SO32−, CO32−], B = [O22−, F2], C = [CN−, CO], D = [NH3, H3O+] तथा E = [MnO42−, CrO42−] में से वे युग्म जिनकी लुईस बिंदु संरचना (Lewis dot structure) समान नहीं है, हैं

  1. AA, B and EA, B तथा E
  2. BA and EA तथा E
  3. CB, C and DB, C तथा D
  4. DC and DC तथा D
Show answer

Concept: Isoelectronic species with the same number of atoms have similar Lewis structures; differing electron count or lone pairs give different structures.

  1. A: SO32− (26 valence e−) has a lone pair on S (pyramidal); CO32− (24 e−) has none (planar) → different.
  2. B: O22− and F2 both 14 valence e−, single bond with three lone pairs on each atom → similar.
  3. C: CN− and CO both 10 e−, triple bond with one lone pair on each atom → similar.
  4. D: NH3 and H3O+ both 8 e−, three bond pairs + one lone pair → similar.
  5. E: MnO42− has one extra (unpaired, Mn d1) electron compared to CrO42− (Cr d0) → different.
  6. Hence A and E; options with B, C or D are wrong.

Short trick: Count valence electrons – equal counts (B, C, D) mean similar Lewis structures.

Answer: (B) A and E

अवधारणा: समान परमाणुओं की संख्या वाली समइलेक्ट्रॉनिक (isoelectronic) स्पीशीज़ की लुईस संरचनाएँ समान होती हैं; इलेक्ट्रॉन संख्या या एकाकी युग्मों में अंतर होने पर संरचना भिन्न होती है।

  1. A: SO32− (26 संयोजी e−) में S पर एक एकाकी युग्म है (पिरैमिडी); CO32− (24 e−) में नहीं (समतलीय) → भिन्न।
  2. B: O22− तथा F2 दोनों में 14 संयोजी e−, एकल आबंध तथा प्रत्येक परमाणु पर तीन एकाकी युग्म → समान।
  3. C: CN− तथा CO दोनों में 10 e−, त्रिआबंध तथा प्रत्येक परमाणु पर एक एकाकी युग्म → समान।
  4. D: NH3 तथा H3O+ दोनों में 8 e−, तीन आबंधी युग्म + एक एकाकी युग्म → समान।
  5. E: MnO42− में CrO42− (Cr d0) की तुलना में एक अतिरिक्त (अयुग्मित, Mn d1) इलेक्ट्रॉन है → भिन्न।
  6. अतः A तथा E; B, C या D वाले विकल्प गलत हैं।

शॉर्ट ट्रिक: संयोजी इलेक्ट्रॉन गिनिए – बराबर संख्या (B, C, D) का अर्थ समान लुईस संरचना।

उत्तर: (B) A तथा E

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryChemical Bonding – Lewis structuresJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q205.

Arrange the following isothermal processes in order of the magnitude of the work (p − V) involved between states 1 and 2.

A. Expansion in single stage wA
B. Expansion in multi stages wB
C. Compression in single stage wC
D. Compression in multi stages wD

Choose the correct option.

अवस्थाओं 1 तथा 2 के बीच निहित कार्य (p − V) के परिमाण के क्रम में निम्नलिखित समतापीय प्रक्रमों को व्यवस्थित कीजिए।

A. एकल चरण में प्रसार wA
B. बहु-चरणों में प्रसार wB
C. एकल चरण में संपीडन wC
D. बहु-चरणों में संपीडन wD

सही विकल्प चुनिए।

  1. A|wB| > |wA| > |wC| > |wD|
  2. B|wC| > |wD| > |wA| > |wB|
  3. C|wC| > |wD| > |wB| > |wA|
  4. D|wB| > |wA| > |wD| > |wC|
Show answer

Concept: On a p–V diagram the work is the area under the external-pressure path. The reversible area lies between the expansion and compression areas: |wexp| ≤ |wrev| ≤ |wcomp|.

  1. Single-stage compression is done against the final (highest) pressure → largest area → |wC| is maximum.
  2. Multi-stage compression approaches the reversible path from above → |wD| < |wC| but still > |wrev|.
  3. Multi-stage expansion approaches the reversible path from below → |wB| < |wrev|.
  4. Single-stage expansion against the final (lowest) pressure → smallest area → |wA| is minimum.
  5. Order: |wC| > |wD| > |wB| > |wA|. (A), (D) put expansion above compression; (B) puts single-stage expansion above multi-stage expansion – wrong.

Short trick: Compression always costs more than expansion gives; more stages push both towards the reversible value.

Answer: (C) |wC| > |wD| > |wB| > |wA|

अवधारणा: p–V आरेख पर कार्य बाह्य दाब पथ के नीचे का क्षेत्रफल है। उत्क्रमणीय क्षेत्रफल प्रसार तथा संपीडन क्षेत्रफलों के बीच होता है: |wप्रसार| ≤ |wउत्क्र.| ≤ |wसंपीडन|।

  1. एकल चरण संपीडन अंतिम (उच्चतम) दाब के विरुद्ध होता है → सबसे बड़ा क्षेत्रफल → |wC| अधिकतम।
  2. बहु-चरण संपीडन ऊपर से उत्क्रमणीय पथ के निकट पहुँचता है → |wD| < |wC| परन्तु फिर भी > |wउत्क्र.|।
  3. बहु-चरण प्रसार नीचे से उत्क्रमणीय पथ के निकट पहुँचता है → |wB| < |wउत्क्र.|।
  4. एकल चरण प्रसार अंतिम (न्यूनतम) दाब के विरुद्ध → सबसे छोटा क्षेत्रफल → |wA| न्यूनतम।
  5. क्रम: |wC| > |wD| > |wB| > |wA|। (A), (D) में प्रसार को संपीडन से अधिक रखा गया है; (B) में एकल चरण प्रसार को बहु-चरण प्रसार से अधिक रखा गया है – गलत।

शॉर्ट ट्रिक: संपीडन में लगने वाला कार्य हमेशा प्रसार से प्राप्त कार्य से अधिक होता है; अधिक चरण दोनों को उत्क्रमणीय मान की ओर ले जाते हैं।

उत्तर: (C) |wC| > |wD| > |wB| > |wA|

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryThermodynamics – p–V work in isothermal processesJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q206.

When 0.25 moles of a non-volatile, non-ionizable solute was dissolved in 1 mole of a solvent the vapor pressure of solution was x % of vapor pressure of pure solvent. What is x %?

जब एक अवाष्पशील, अनआयनीकरणीय विलेय के 0.25 मोल को एक विलायक के 1 मोल में घोला गया, तो विलयन का वाष्प दाब शुद्ध विलायक के वाष्प दाब का x % था। x % क्या है?

  1. A50%
  2. B60%
  3. C70%
  4. D80%
Show answer

Concept: For a non-volatile solute, Raoult's law: ps = xsolvent · p°.

  1. xsolvent = 11+0.25=11.25=0.8.
  2. ps = 0.8 p° → 80% of the pure-solvent vapour pressure.

Short trick: ps/p° = nsolvent/(nsolvent + nsolute) = 1/1.25.

Answer: (D) 80%

अवधारणा: अवाष्पशील विलेय के लिए राउल्ट का नियम: ps = xविलायक · p°।

  1. xविलायक = 11+0.25=11.25=0.8।
  2. ps = 0.8 p° → शुद्ध विलायक के वाष्प दाब का 80%।

शॉर्ट ट्रिक: ps/p° = nविलायक/(nविलायक + nविलेय) = 1/1.25।

उत्तर: (D) 80%

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistrySolutions – Raoult's lawJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q207.

One mole each of He and A(g) are taken in a 10 L closed flask and heated to 400 K to establish the following equilibrium.

A(g) ⇌ B (g)

Kc for this reaction at 400 K is 4.0. The partial pressures (in atm) of He and B(g) are respectively (at equilibrium)

(Assume He, A(g) and B(g) behave as ideal gases)

(Given : R = 0.082 L atm K−1 mol−1)

He तथा A(g) प्रत्येक का एक मोल 10 L के बंद फ्लास्क में लिया जाता है तथा निम्नलिखित साम्य स्थापित करने के लिए 400 K तक गर्म किया जाता है।

A(g) ⇌ B (g)

400 K पर इस अभिक्रिया के लिए Kc 4.0 है। (साम्य पर) He तथा B(g) के आंशिक दाब (atm में) क्रमशः हैं

(मान लीजिए He, A(g) तथा B(g) आदर्श गैसों की भाँति व्यवहार करती हैं)

(दिया है : R = 0.082 L atm K−1 mol−1)

  1. A3.28, 2.624
  2. B2.624, 3.28
  3. C3.28, 0.656
  4. D0.656, 6.56
Show answer

Concept: He is inert; it does not take part but has its own partial pressure p = nRT/V. For A ⇌ B (Δn = 0), Kc = nB/nA.

  1. Let y mol A convert: y1−y=4 → y = 0.8 mol B, 0.2 mol A left.
  2. pHe = 1×0.082×40010=3.28 atm.
  3. pB = 0.8×0.082×40010=2.624 atm.

Short trick: RT/V = 3.28 atm per mole; multiply by 1 (He) and 0.8 (B).

Answer: (A) 3.28, 2.624

अवधारणा: He अक्रिय है; यह अभिक्रिया में भाग नहीं लेती परन्तु इसका अपना आंशिक दाब p = nRT/V होता है। A ⇌ B (Δn = 0) के लिए Kc = nB/nA।

  1. माना y मोल A परिवर्तित होता है: y1−y=4 → y = 0.8 मोल B, 0.2 मोल A शेष।
  2. pHe = 1×0.082×40010=3.28 atm।
  3. pB = 0.8×0.082×40010=2.624 atm।

शॉर्ट ट्रिक: RT/V = 3.28 atm प्रति मोल; इसे 1 (He) तथा 0.8 (B) से गुणा कीजिए।

उत्तर: (A) 3.28, 2.624

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryChemical Equilibrium – partial pressuresJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q208.

Consider the following data.

ElectrolyteΛ°m (S cm2 mol−1)
BaCl2x1
H2SO4x2
HClx3

BaSO4 is sparingly soluble in water. If the conductivity of the saturated BaSO4 solution is x S cm−1 then the solubility product of BaSO4 can be given as

(Here Λm = Λ°m)

निम्नलिखित आँकड़ों पर विचार कीजिए।

वैद्युतअपघट्यΛ°m (S cm2 mol−1)
BaCl2x1
H2SO4x2
HClx3

BaSO4 जल में अल्प विलेय है। यदि संतृप्त BaSO4 विलयन की चालकता x S cm−1 है, तो BaSO4 का विलेयता गुणनफल दिया जा सकता है

(यहाँ Λm = Λ°m)

  1. A106x2α2(x1+x2−2x3)2
  2. Bx2(x1+x2−2x3)2
  3. Cα2(x1+x2−2x3)2106x2
  4. Dx2(x1+x2+2x3)2
Show answer

Concept: Kohlrausch's law gives Λ°m(BaSO4); solubility s (mol L−1) = 1000κΛm; Ksp = s2.

  1. Λ°m(BaSO4) = Λ°(BaCl2) + Λ°(H2SO4) − 2Λ°(HCl) = x1 + x2 − 2x3.
  2. s = 1000xx1+x2−2x3 mol L−1.
  3. Ksp = s2 = 106x2(x1+x2−2x3)2.
  4. The degree of dissociation α = Λm/Λ°m = 1 here, so this equals 106x2α2(x1+x2−2x3)2 → (A). (B) misses the factor 106 (cm3 → L), (C) is the reciprocal, (D) has the wrong sign of 2x3.

Short trick: Ksp = (1000κ/Λ°)2 – look for 106κ2 in the numerator.

Answer: (A) 106x2α2(x1+x2−2x3)2

अवधारणा: कोलराउश नियम से Λ°m(BaSO4) प्राप्त होता है; विलेयता s (mol L−1) = 1000κΛm; Ksp = s2।

  1. Λ°m(BaSO4) = Λ°(BaCl2) + Λ°(H2SO4) − 2Λ°(HCl) = x1 + x2 − 2x3।
  2. s = 1000xx1+x2−2x3 mol L−1।
  3. Ksp = s2 = 106x2(x1+x2−2x3)2।
  4. यहाँ वियोजन की मात्रा α = Λm/Λ°m = 1 है, अतः यह 106x2α2(x1+x2−2x3)2 के बराबर है → (A)। (B) में 106 गुणांक (cm3 → L) छूटा है, (C) व्युत्क्रम है, (D) में 2x3 का चिह्न गलत है।

शॉर्ट ट्रिक: Ksp = (1000κ/Λ°)2 – अंश में 106κ2 देखिए।

उत्तर: (A) 106x2α2(x1+x2−2x3)2

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryElectrochemistry – Kohlrausch law and K<sub>sp</sub>JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q209.

Given below are two statements:

Statement I: Aluminium is more electropositive than thallium as the standard electrode potential value of E°Al3+/Al is negative and E°Tl3+/Tl is positive.

Statement II: The sum of first three ionization enthalpies of boron is very high when compared to that of aluminium. Due to this reason boron forms covalent compounds only and aluminium forms Al3+ ion.

In the light of the above statements, choose the correct answer from the options given below

नीचे दो कथन दिए गए हैं:

कथन I: ऐलुमिनियम, थैलियम की तुलना में अधिक विद्युतधनी है क्योंकि E°Al3+/Al का मानक इलेक्ट्रोड विभव मान ऋणात्मक है तथा E°Tl3+/Tl धनात्मक है।

कथन II: बोरॉन की प्रथम तीन आयनन एन्थैल्पियों का योग ऐलुमिनियम की तुलना में बहुत अधिक है। इस कारण बोरॉन केवल सहसंयोजी यौगिक बनाता है तथा ऐलुमिनियम Al3+ आयन बनाता है।

उपरोक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: Group-13 trends: E° values and ionisation enthalpies.

  1. Statement I: E°(Al3+/Al) = −1.66 V while E°(Tl3+/Tl) = +1.26 V. Al is readily oxidised to Al3+ (electropositive), whereas Tl3+ is a strong oxidant (inert-pair effect) → true.
  2. Statement II: ΣIE1–3 of B (≈ 6887 kJ mol−1) is far higher than that of Al (≈ 5137 kJ mol−1); hence B cannot form B3+ and forms only covalent compounds, while Al forms Al3+ → true.
  3. So (B), (C), (D) are wrong.

Short trick: Negative E° = good reducing metal = electropositive; Tl3+ is unstable due to the inert-pair effect.

Answer: (A) Both Statement I and Statement II are true

अवधारणा: वर्ग-13 की प्रवृत्तियाँ: E° मान तथा आयनन एन्थैल्पी।

  1. कथन I: E°(Al3+/Al) = −1.66 V जबकि E°(Tl3+/Tl) = +1.26 V। Al सरलता से Al3+ में ऑक्सीकृत होता है (विद्युतधनी), जबकि Tl3+ एक प्रबल ऑक्सीकारक है (अक्रिय युग्म प्रभाव) → सत्य।
  2. कथन II: B की ΣIE1–3 (≈ 6887 kJ mol−1) Al (≈ 5137 kJ mol−1) से बहुत अधिक है; अतः B, B3+ नहीं बना पाता तथा केवल सहसंयोजी यौगिक बनाता है, जबकि Al, Al3+ बनाता है → सत्य।
  3. अतः (B), (C), (D) गलत हैं।

शॉर्ट ट्रिक: ऋणात्मक E° = अच्छा अपचायक धातु = विद्युतधनी; अक्रिय युग्म प्रभाव के कारण Tl3+ अस्थायी है।

उत्तर: (A) कथन I और कथन II दोनों सत्य हैं

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)Chemistryp-Block Elements – Group 13JEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q210.

The correct statements among the following are.

A. Basic vanadium oxide is used in the manufacture of H2SO4.
B. The spin-only magnetic moment value of the transition metal halide employed in Ziegler-Natta polymerization is 2.84 BM.
C. The p-block metal compound employed in Ziegler-Natta polymerization has the metal in +3 oxidation state.
D. The number of electrons present in the outer most 'd' orbital of metal halide employed in Wacker process is 8.

Choose the correct answer from the options given below:

निम्नलिखित में से सही कथन हैं।

A. क्षारकीय वैनेडियम ऑक्साइड का उपयोग H2SO4 के निर्माण में किया जाता है।
B. ज़ीग्लर-नाटा बहुलकन (Ziegler-Natta polymerization) में प्रयुक्त संक्रमण धातु हैलाइड का प्रचक्रण-मात्र (spin-only) चुंबकीय आघूर्ण मान 2.84 BM है।
C. ज़ीग्लर-नाटा बहुलकन में प्रयुक्त p-ब्लॉक धातु यौगिक में धातु +3 ऑक्सीकरण अवस्था में है।
D. वाकर प्रक्रम (Wacker process) में प्रयुक्त धातु हैलाइड के सबसे बाहरी 'd' कक्षक में उपस्थित इलेक्ट्रॉनों की संख्या 8 है।

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA and B Onlyकेवल A तथा B
  2. BA, C and D Onlyकेवल A, C तथा D
  3. CC and D Onlyकेवल C तथा D
  4. DB, C and D Onlyकेवल B, C तथा D
Show answer

Concept: Catalysts – Contact process (V2O5), Ziegler–Natta (TiCl4 + Al(C2H5)3), Wacker process (PdCl2).

  1. A: The oxide used in the contact process is V2O5, which is amphoteric (not basic) → false.
  2. B: TiCl4 has Ti4+ (3d0), μ = 0 BM (2.84 BM would need 2 unpaired electrons) → false.
  3. C: Al(C2H5)3 – Al is in +3 state → true.
  4. D: PdCl2 – Pd2+ is 4d8 → 8 d-electrons → true.
  5. Correct: C and D only; (A), (B), (D) each include A or B, which are false.

Short trick: Ti4+ = d0 (diamagnetic), Pd2+ = d8.

Answer: (C) C and D Only

अवधारणा: उत्प्रेरक – संपर्क प्रक्रम (V2O5), ज़ीग्लर–नाटा (TiCl4 + Al(C2H5)3), वाकर प्रक्रम (PdCl2)।

  1. A: संपर्क प्रक्रम में प्रयुक्त ऑक्साइड V2O5 है, जो उभयधर्मी (amphoteric) है (क्षारकीय नहीं) → असत्य।
  2. B: TiCl4 में Ti4+ (3d0) है, μ = 0 BM (2.84 BM के लिए 2 अयुग्मित इलेक्ट्रॉन चाहिए) → असत्य।
  3. C: Al(C2H5)3 – Al, +3 अवस्था में है → सत्य।
  4. D: PdCl2 – Pd2+ 4d8 है → 8 d-इलेक्ट्रॉन → सत्य।
  5. सही: केवल C तथा D; (A), (B), (D) प्रत्येक में A या B शामिल है, जो असत्य हैं।

शॉर्ट ट्रिक: Ti4+ = d0 (प्रतिचुंबकीय), Pd2+ = d8।

उत्तर: (C) केवल C तथा D

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)Chemistryd-Block Elements – industrial catalystsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q211.

Match the LIST-I with LIST-II

List-I
Electronic configuration of tetrahedral metal ion
List-II
Crystal Field Stabilization Energy (Δt)
A.d2I.− 0.6
B.d4II.− 0.8
C.d6III.− 1.2
D.d8IV.− 0.4

Choose the correct answer from the options given below:

सूची-I का सूची-II से मिलान कीजिए

सूची-I
चतुष्फलकीय धातु आयन का इलेक्ट्रॉनिक विन्यास
सूची-II
क्रिस्टल क्षेत्र स्थायीकरण ऊर्जा (Δt)
A.d2I.− 0.6
B.d4II.− 0.8
C.d6III.− 1.2
D.d8IV.− 0.4

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA-III, B-IV, C-II, D-I
  2. BA-III, B-I, C-IV, D-II
  3. CA-III, B-IV, C-I, D-II
  4. DA-II, B-I, C-IV, D-III
Show answer

Concept: In a tetrahedral field e orbitals lie at −0.6Δt and t2 at +0.4Δt; Δt is small, so complexes are always high spin.

  1. d2: e2 → 2(−0.6) = −1.2Δt → III.
  2. d4: e2t22 → −1.2 + 0.8 = −0.4Δt → IV.
  3. d6: e3t23 → −1.8 + 1.2 = −0.6Δt → I.
  4. d8: e4t24 → −2.4 + 1.6 = −0.8Δt → II.
  5. (A) swaps d6/d8, (B) swaps d4/d6, (D) is wrong for d2.

Short trick: Simply use CFSE = (−0.6 ne + 0.4 nt2)Δt.

Answer: (C) A-III, B-IV, C-I, D-II

अवधारणा: चतुष्फलकीय क्षेत्र में e कक्षक −0.6Δt पर तथा t2 कक्षक +0.4Δt पर होते हैं; Δt छोटा होता है, अतः संकुल सदैव उच्च प्रचक्रण होते हैं।

  1. d2: e2 → 2(−0.6) = −1.2Δt → III।
  2. d4: e2t22 → −1.2 + 0.8 = −0.4Δt → IV।
  3. d6: e3t23 → −1.8 + 1.2 = −0.6Δt → I।
  4. d8: e4t24 → −2.4 + 1.6 = −0.8Δt → II।
  5. (A) में d6/d8 की अदला-बदली है, (B) में d4/d6 की, (D) में d2 गलत है।

शॉर्ट ट्रिक: सीधे CFSE = (−0.6 ne + 0.4 nt2)Δt का प्रयोग कीजिए।

उत्तर: (C) A-III, B-IV, C-I, D-II

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryCoordination Compounds – CFSE in tetrahedral fieldJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q212.

Which of the following are true about the energy of the given d-orbitals of a tetrahedral complex?

A. dxy = dxz > dx2−y2
B. dxy = dyz > dz2
C. dx2−y2 > dz2 > dxz
D. dx2−y2 = dz2 < dxz

Choose the correct answer from the given below:

एक चतुष्फलकीय संकुल के दिए गए d-कक्षकों की ऊर्जा के संबंध में निम्नलिखित में से कौन-से सत्य हैं?

A. dxy = dxz > dx2−y2
B. dxy = dyz > dz2
C. dx2−y2 > dz2 > dxz
D. dx2−y2 = dz2 < dxz

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA, B and D onlyकेवल A, B तथा D
  2. BA and B onlyकेवल A तथा B
  3. CB and D onlyकेवल B तथा D
  4. DB, C and D onlyकेवल B, C तथा D
Show answer

Concept: In a tetrahedral field the d-orbitals split into a higher t2 set (dxy, dyz, dxz, degenerate) and a lower e set (dx2−y2, dz2, degenerate).

  1. A: t2 = t2 > e → true.
  2. B: t2 = t2 > e → true.
  3. C: dx2−y2 and dz2 are degenerate and both lie below dxz → false.
  4. D: e = e < t2 → true.
  5. So A, B and D; (B), (C) miss a true statement and (D) includes false C.

Short trick: Tetrahedral is the inverse of octahedral: the 'between-axes' orbitals go up.

Answer: (A) A, B and D only

अवधारणा: चतुष्फलकीय क्षेत्र में d-कक्षक उच्च t2 समुच्चय (dxy, dyz, dxz, समभ्रंश) तथा निम्न e समुच्चय (dx2−y2, dz2, समभ्रंश) में विपाटित होते हैं।

  1. A: t2 = t2 > e → सत्य।
  2. B: t2 = t2 > e → सत्य।
  3. C: dx2−y2 तथा dz2 समभ्रंश हैं तथा दोनों dxz से नीचे हैं → असत्य।
  4. D: e = e < t2 → सत्य।
  5. अतः A, B तथा D; (B), (C) में एक सत्य कथन छूटा है तथा (D) में असत्य C शामिल है।

शॉर्ट ट्रिक: चतुष्फलकीय, अष्टफलकीय का उलटा है: 'अक्षों के बीच' वाले कक्षक ऊपर जाते हैं।

उत्तर: (A) केवल A, B तथा D

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryCoordination Compounds – crystal field splittingJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q213.

Rf value for 2-methylpropene in a solvent system (Ethyl acetate + ether) is 0.42.

2-methylpropene is treated with dilute H2SO4 to give major organic product (X).

Rf value for (X) in the same solvent system under identical condition will be:

एक विलायक तंत्र (एथिल ऐसीटेट + ईथर) में 2-मेथिलप्रोपीन का Rf मान 0.42 है।

2-मेथिलप्रोपीन को तनु H2SO4 के साथ उपचारित करने पर मुख्य कार्बनिक उत्पाद (X) प्राप्त होता है।

समान परिस्थितियों में उसी विलायक तंत्र में (X) का Rf मान होगा:

  1. A0.42
  2. B0.82
  3. C0.62
  4. D0.12
Show answer

Concept: In TLC on polar silica, more polar compounds are adsorbed more strongly and move less → lower Rf.

  1. (CH3)2C=CH2 + H2O (dil. H2SO4) → (CH3)3C–OH (Markovnikov, via 3° carbocation); X = tert-butyl alcohol.
  2. X has an –OH group (H-bonding with silica), so it is much more polar than the alkene → Rf < 0.42.
  3. Only 0.12 is lower than 0.42; 0.42, 0.62 and 0.82 imply equal or lower polarity – wrong.

Short trick: More polar → sticks to the plate → smaller Rf.

Answer: (D) 0.12

अवधारणा: ध्रुवीय सिलिका पर TLC में अधिक ध्रुवीय यौगिक अधिक प्रबलता से अधिशोषित होते हैं तथा कम चलते हैं → कम Rf।

  1. (CH3)2C=CH2 + H2O (तनु H2SO4) → (CH3)3C–OH (मार्कोनीकॉफ, 3° कार्बधनायन द्वारा); X = tert-ब्यूटिल ऐल्कोहॉल।
  2. X में –OH समूह है (सिलिका के साथ H-आबंधन), अतः यह ऐल्कीन से बहुत अधिक ध्रुवीय है → Rf < 0.42।
  3. केवल 0.12 ही 0.42 से कम है; 0.42, 0.62 तथा 0.82 समान या कम ध्रुवता दर्शाते हैं – गलत।

शॉर्ट ट्रिक: अधिक ध्रुवीय → प्लेट से चिपकता है → छोटा Rf।

उत्तर: (D) 0.12

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryPurification – TLC R<sub>f</sub> and hydration of alkeneJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q214.

Given below are two statements:

Statement I: 2,6-diethylcyclohexanone and 6-methyl-2-n-propylcyclohexanone are metamers.

Statement II: 2,2,6,6 - tetramethylcyclohexanone exhibits keto-enol tautomerism.

In the light of the above statements, choose the correct answer from the options given below

नीचे दो कथन दिए गए हैं:

कथन I: 2,6-डाइएथिलसाइक्लोहेक्सेनोन तथा 6-मेथिल-2-n-प्रोपिलसाइक्लोहेक्सेनोन मध्यावयवी (metamers) हैं।

कथन II: 2,2,6,6-टेट्रामेथिलसाइक्लोहेक्सेनोन कीटो-ईनॉल चलावयवता (keto-enol tautomerism) प्रदर्शित करता है।

उपरोक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: Metamers have the same formula and functional group but different alkyl groups on either side of the functional group; keto-enol tautomerism needs an α-hydrogen.

  1. Statement I: both compounds are C10H18O cyclohexanones. Around the C=O, one has ethyl/ethyl on the two α-carbons, the other methyl/n-propyl – same functional group, different distribution of alkyl groups on the two sides → metamers → true.
  2. Statement II: in 2,2,6,6-tetramethylcyclohexanone both α-carbons (C-2 and C-6) are quaternary, so there is no α-H → no enolisation → false.
  3. Hence (A), (B), (D) are wrong.

Short trick: No α-H, no enol.

Answer: (C) Statement I is true but Statement II is false

अवधारणा: मध्यावयवियों का सूत्र तथा क्रियात्मक समूह समान होता है परन्तु क्रियात्मक समूह के दोनों ओर भिन्न ऐल्किल समूह होते हैं; कीटो-ईनॉल चलावयवता के लिए α-हाइड्रोजन आवश्यक है।

  1. कथन I: दोनों यौगिक C10H18O साइक्लोहेक्सेनोन हैं। C=O के चारों ओर, एक में दोनों α-कार्बनों पर एथिल/एथिल है, दूसरे में मेथिल/n-प्रोपिल – क्रियात्मक समूह समान, दोनों ओर ऐल्किल समूहों का वितरण भिन्न → मध्यावयवी → सत्य।
  2. कथन II: 2,2,6,6-टेट्रामेथिलसाइक्लोहेक्सेनोन में दोनों α-कार्बन (C-2 तथा C-6) चतुष्क (quaternary) हैं, अतः कोई α-H नहीं → ईनॉलन नहीं → असत्य।
  3. अतः (A), (B), (D) गलत हैं।

शॉर्ट ट्रिक: α-H नहीं, तो ईनॉल नहीं।

उत्तर: (C) कथन I सत्य है परन्तु कथन II असत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryOrganic Chemistry – isomerism and tautomerismJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q215.

Given below are two statements:

Statement I: Methane can be prepared by decarboxylation of sodium ethanoate, Kolbe's electrolysis of sodium acetate and reaction of CH3MgBr with water.

Statement II: Methane cannot be prepared from unsaturated hydrocarbons and by Wurtz reaction.

In the light of the above statements, choose the correct answer from the options given below

नीचे दो कथन दिए गए हैं:

कथन I: मेथेन को सोडियम एथेनोएट के विकार्बोक्सिलन, सोडियम ऐसीटेट के कोल्बे वैद्युतअपघटन तथा CH3MgBr की जल के साथ अभिक्रिया द्वारा बनाया जा सकता है।

कथन II: मेथेन को असंतृप्त हाइड्रोकार्बनों से तथा वुर्ट्ज़ अभिक्रिया (Wurtz reaction) द्वारा नहीं बनाया जा सकता।

उपरोक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: Methods that build C–C bonds or add H2 to a C=C cannot give a one-carbon alkane.

  1. CH3COONa + NaOH (CaO) → CH4 + Na2CO3 ✓; CH3MgBr + H2O → CH4 ✓.
  2. But Kolbe's electrolysis of CH3COONa gives CH3–CH3 (ethane), not methane → Statement I is false.
  3. Statement II: the simplest unsaturated hydrocarbon has two carbons (hydrogenation gives ≥ C2), and Wurtz coupling joins two alkyl groups (≥ C2) → methane cannot be made by either → true.
  4. Hence (A), (B), (C) are wrong.

Short trick: Kolbe and Wurtz both double the carbon count – never CH4.

Answer: (D) Statement I is false but Statement II is true

अवधारणा: वे विधियाँ जो C–C आबंध बनाती हैं या C=C पर H2 जोड़ती हैं, एक-कार्बन ऐल्केन नहीं दे सकतीं।

  1. CH3COONa + NaOH (CaO) → CH4 + Na2CO3 ✓; CH3MgBr + H2O → CH4 ✓।
  2. परन्तु CH3COONa का कोल्बे वैद्युतअपघटन CH3–CH3 (एथेन) देता है, मेथेन नहीं → कथन I असत्य है।
  3. कथन II: सबसे सरल असंतृप्त हाइड्रोकार्बन में दो कार्बन होते हैं (हाइड्रोजनन से ≥ C2), तथा वुर्ट्ज़ युग्मन दो ऐल्किल समूहों को जोड़ता है (≥ C2) → किसी से भी मेथेन नहीं बन सकती → सत्य।
  4. अतः (A), (B), (C) गलत हैं।

शॉर्ट ट्रिक: कोल्बे तथा वुर्ट्ज़ दोनों कार्बन संख्या को दोगुना करते हैं – कभी CH4 नहीं।

उत्तर: (D) कथन I असत्य है परन्तु कथन II सत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryHydrocarbons – preparation of methaneJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q216.

Given below are two statements:

Statement I: 3-phenylpropene reacts with HBr and gives secondary alkyl bromide having a chiral carbon atom as the major product.

Statement II: Aryl chlorides and aryl cyanides can be prepared by Sandmeyer reaction as well as Gattermann reaction.

In the light of the above statements, choose the correct answer from the options given below

नीचे दो कथन दिए गए हैं:

कथन I: 3-फेनिलप्रोपीन HBr से अभिक्रिया करके मुख्य उत्पाद के रूप में किरैल कार्बन परमाणु युक्त द्वितीयक ऐल्किल ब्रोमाइड देता है।

कथन II: ऐरिल क्लोराइड तथा ऐरिल सायनाइड, सैन्डमायर अभिक्रिया (Sandmeyer reaction) तथा गाटरमान अभिक्रिया (Gattermann reaction) दोनों द्वारा बनाए जा सकते हैं।

उपरोक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए

  1. ABoth Statement I and Statement II are trueकथन I और कथन II दोनों सत्य हैं
  2. BBoth Statement I and Statement II are falseकथन I और कथन II दोनों असत्य हैं
  3. CStatement I is true but Statement II is falseकथन I सत्य है परन्तु कथन II असत्य है
  4. DStatement I is false but Statement II is trueकथन I असत्य है परन्तु कथन II सत्य है
Show answer

Concept: Electrophilic addition of HBr (Markovnikov) and replacement reactions of diazonium salts.

  1. Statement I: PhCH2CH=CH2 + HBr → H+ adds to the terminal CH2, giving a 2° carbocation; Br− attack gives PhCH2CH(Br)CH3 (even if a hydride shift gives the benzylic ion, the product PhCH(Br)CH2CH3 is also 2°). In either case the C–Br carbon carries four different groups → chiral 2° bromide → true.
  2. Statement II: Sandmeyer (CuCl/HCl, CuCN/KCN) gives both ArCl and ArCN. Gattermann reaction (Cu powder + HCl/HBr) gives only ArCl/ArBr, not ArCN → false.
  3. Hence (A), (B), (D) are wrong.

Short trick: Gattermann = Cu + HX → only halides; cyanide needs Sandmeyer's CuCN.

Answer: (C) Statement I is true but Statement II is false

अवधारणा: HBr का इलेक्ट्रॉनरागी योगज (मार्कोनीकॉफ) तथा डाइऐज़ोनियम लवणों की प्रतिस्थापन अभिक्रियाएँ।

  1. कथन I: PhCH2CH=CH2 + HBr → H+ अंतस्थ CH2 पर जुड़ता है, जिससे 2° कार्बधनायन बनता है; Br− के आक्रमण से PhCH2CH(Br)CH3 बनता है (यदि हाइड्राइड विस्थापन से बेन्ज़िलिक आयन बने, तब भी उत्पाद PhCH(Br)CH2CH3 भी 2° है)। दोनों स्थितियों में C–Br कार्बन पर चार भिन्न समूह हैं → किरैल 2° ब्रोमाइड → सत्य।
  2. कथन II: सैन्डमायर (CuCl/HCl, CuCN/KCN) से ArCl तथा ArCN दोनों बनते हैं। गाटरमान अभिक्रिया (Cu चूर्ण + HCl/HBr) केवल ArCl/ArBr देती है, ArCN नहीं → असत्य।
  3. अतः (A), (B), (D) गलत हैं।

शॉर्ट ट्रिक: गाटरमान = Cu + HX → केवल हैलाइड; सायनाइड के लिए सैन्डमायर का CuCN चाहिए।

उत्तर: (C) कथन I सत्य है परन्तु कथन II असत्य है

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryHaloalkanes and Haloarenes – preparationJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q217.

Consider the following sequence of reactions

The major product P is:

अभिक्रियाओं के निम्नलिखित अनुक्रम पर विचार कीजिए

मुख्य उत्पाद P है:

  1. A
  2. B
  3. C
  4. D
Show answer

Concept: Tertiary alcohols are dehydrated (not dehydrogenated) by Cu at 573 K; the alkene then forms a stable 3° carbocation in acid, which is trapped by a nucleophile.

  1. (CH3)3C–OH has no α-H on the carbinol carbon, so Cu/573 K gives 2-methylpropene: (CH3)2C=CH2 + H2O.
  2. With H+: (CH3)2C=CH2 → (CH3)3C+ (Markovnikov, 3° cation).
  3. The carboxyl O of PhCOOH attacks the cation → PhCOO–C(CH3)3 (tert-butyl benzoate) after loss of H+.
  4. (A)/(B): ring tert-butylation is not favoured – –COOH strongly deactivates the ring; (D) is the methallyl ester, which needs addition at the wrong carbon.

Short trick: 3° alcohol + Cu → alkene; alkene + H+ + RCOOH → tert-butyl ester.

Answer: (C) tert-butyl benzoate

अवधारणा: 573 K पर Cu द्वारा तृतीयक ऐल्कोहॉल का निर्जलीकरण होता है (विहाइड्रोजनन नहीं); फिर ऐल्कीन अम्ल में स्थायी 3° कार्बधनायन बनाती है, जिसे नाभिकरागी पकड़ लेता है।

  1. (CH3)3C–OH में कार्बिनॉल कार्बन पर कोई H नहीं है, अतः Cu/573 K से 2-मेथिलप्रोपीन बनती है: (CH3)2C=CH2 + H2O।
  2. H+ के साथ: (CH3)2C=CH2 → (CH3)3C+ (मार्कोनीकॉफ, 3° धनायन)।
  3. PhCOOH का कार्बॉक्सिल O धनायन पर आक्रमण करता है → H+ के निष्कासन के बाद PhCOO–C(CH3)3 (tert-ब्यूटिल बेन्ज़ोएट)।
  4. (A)/(B): वलय का tert-ब्यूटिलन अनुकूल नहीं है – –COOH वलय को प्रबल रूप से निष्क्रिय करता है; (D) मेथैलिल एस्टर है, जिसके लिए गलत कार्बन पर योग आवश्यक होगा।

शॉर्ट ट्रिक: 3° ऐल्कोहॉल + Cu → ऐल्कीन; ऐल्कीन + H+ + RCOOH → tert-ब्यूटिल एस्टर।

उत्तर: (C) tert-ब्यूटिल बेन्ज़ोएट

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAlcohols – dehydration and esterificationJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q218.

Arrange the following compounds according to increasing order of boiling points.

n - C4H9OH (A), n - C4H9NH2 (B), n - C4H10 (C) and C2H5NHC2H5 (D).

निम्नलिखित यौगिकों को क्वथनांकों के बढ़ते क्रम में व्यवस्थित कीजिए।

n - C4H9OH (A), n - C4H9NH2 (B), n - C4H10 (C) तथा C2H5NHC2H5 (D)।

  1. AC < B < A < D
  2. BD < C < B < A
  3. CC < D < B < A
  4. DD < B < A < C
Show answer

Concept: For similar molar masses, boiling point rises with extent of intermolecular H-bonding: alcohol > 1° amine > 2° amine > alkane.

  1. n-Butane (C): only van der Waals forces, b.p. ≈ 273 K – lowest.
  2. Diethylamine (D): one N–H, weaker H-bonding, b.p. ≈ 329 K.
  3. n-Butylamine (B): two N–H, more H-bonding, b.p. ≈ 351 K.
  4. n-Butanol (A): O–H forms stronger H-bonds (O more electronegative), b.p. ≈ 391 K – highest.
  5. Order C < D < B < A; (A), (B), (D) misplace the alkane or the alcohol.

Short trick: More (and stronger) H-bond donors → higher b.p.: OH > NH2 > NH > none.

Answer: (C) C < D < B < A

अवधारणा: समान मोलर द्रव्यमान के लिए, अंतराअणुक H-आबंधन की मात्रा के साथ क्वथनांक बढ़ता है: ऐल्कोहॉल > 1° ऐमीन > 2° ऐमीन > ऐल्केन।

  1. n-ब्यूटेन (C): केवल वान्डरवाल्स बल, क्वथनांक ≈ 273 K – न्यूनतम।
  2. डाइएथिलऐमीन (D): एक N–H, दुर्बल H-आबंधन, क्वथनांक ≈ 329 K।
  3. n-ब्यूटिलऐमीन (B): दो N–H, अधिक H-आबंधन, क्वथनांक ≈ 351 K।
  4. n-ब्यूटेनॉल (A): O–H प्रबल H-आबंध बनाता है (O अधिक विद्युतऋणी), क्वथनांक ≈ 391 K – अधिकतम।
  5. क्रम C < D < B < A; (A), (B), (D) में ऐल्केन या ऐल्कोहॉल गलत स्थान पर है।

शॉर्ट ट्रिक: अधिक (तथा प्रबल) H-आबंध दाता → उच्च क्वथनांक: OH > NH2 > NH > कोई नहीं।

उत्तर: (C) C < D < B < A

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryAmines – boiling pointsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q219.

Match the LIST-I with LIST-II

List-I
Deficiency Disease
List-II
Vitamin
A.ScurvyI.Pyridoxine
B.ConvulsionsII.Vitamin A
C.CheilosisIII.Ascorbic Acid
D.XerophthalmiaIV.Riboflavin

Choose the correct answer from the options given below:

सूची-I का सूची-II से मिलान कीजिए

सूची-I
अभावजन्य रोग
सूची-II
विटामिन
A.स्कर्वी (Scurvy)I.पिरिडॉक्सिन (Pyridoxine)
B.ऐंठन (Convulsions)II.विटामिन A
C.कीलोसिस (Cheilosis)III.ऐस्कॉर्बिक अम्ल (Ascorbic Acid)
D.जीरोफ्थैल्मिया (Xerophthalmia)IV.राइबोफ्लेविन (Riboflavin)

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA-I, B-III, C-II, D-IV
  2. BA-I, B-III, C-IV, D-II
  3. CA-III, B-I, C-IV, D-II
  4. DA-III, B-I, C-II, D-IV
Show answer

Concept: Vitamin deficiency diseases.

  1. Scurvy – vitamin C (ascorbic acid) → III.
  2. Convulsions – vitamin B6 (pyridoxine) → I.
  3. Cheilosis (fissuring at the corners of the mouth) – vitamin B2 (riboflavin) → IV.
  4. Xerophthalmia (hardening of cornea) – vitamin A → II.
  5. (A), (B) give scurvy to pyridoxine; (D) gives cheilosis to vitamin A – wrong.

Short trick: Scurvy–C is certain, so only (C) or (D); cheilosis is a B2 sign → (C).

Answer: (C) A-III, B-I, C-IV, D-II

अवधारणा: विटामिन अभावजन्य रोग।

  1. स्कर्वी – विटामिन C (ऐस्कॉर्बिक अम्ल) → III।
  2. ऐंठन – विटामिन B6 (पिरिडॉक्सिन) → I।
  3. कीलोसिस (मुँह के कोनों का फटना) – विटामिन B2 (राइबोफ्लेविन) → IV।
  4. जीरोफ्थैल्मिया (कॉर्निया का कठोर होना) – विटामिन A → II।
  5. (A), (B) में स्कर्वी को पिरिडॉक्सिन से जोड़ा गया है; (D) में कीलोसिस को विटामिन A से – गलत।

शॉर्ट ट्रिक: स्कर्वी–C निश्चित है, अतः केवल (C) या (D); कीलोसिस B2 का लक्षण है → (C)।

उत्तर: (C) A-III, B-I, C-IV, D-II

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryBiomolecules – vitamins and deficiency diseasesJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1
Q220.

Match the LIST-I with LIST-II

List-I
Amino acid
List-II
Positive reaction/Test for functional group present in side chain of amino acid
A.GlutamineI.Hinsberg's test
B.LysineII.Neutral FeCl3 test
C.TyrosineIII.Ceric ammonium nitrate test
D.SerineIV.Hoffman bromamide degradation

Choose the correct answer from the options given below:

सूची-I का सूची-II से मिलान कीजिए

सूची-I
ऐमीनो अम्ल
सूची-II
ऐमीनो अम्ल की पार्श्व शृंखला में उपस्थित क्रियात्मक समूह के लिए धनात्मक अभिक्रिया/परीक्षण
A.ग्लूटामीन (Glutamine)I.हिंसबर्ग परीक्षण
B.लाइसीन (Lysine)II.उदासीन FeCl3 परीक्षण
C.टाइरोसीन (Tyrosine)III.सेरिक अमोनियम नाइट्रेट परीक्षण
D.सेरीन (Serine)IV.हॉफमान ब्रोमैमाइड निम्नीकरण

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

  1. AA-IV, B-II, C-I, D-III
  2. BA-IV, B-I, C-II, D-III
  3. CA-III, B-II, C-I, D-IV
  4. DA-IV, B-I, C-III, D-II
Show answer

Concept: Identify the side-chain functional group of each amino acid and its characteristic test.

  1. Glutamine: –CH2CH2CONH2 (1° amide) → Hoffmann bromamide degradation → IV.
  2. Lysine: –(CH2)4NH2 (1° amine) → Hinsberg's test → I.
  3. Tyrosine: –CH2C6H4OH (phenol) → violet colour with neutral FeCl3 → II.
  4. Serine: –CH2OH (alcohol) → ceric ammonium nitrate test (red colour) → III.
  5. (A) and (D) swap tyrosine's test; (C) wrongly gives glutamine CAN.

Short trick: Phenol → FeCl3, alcohol → CAN, amine → Hinsberg, amide → Hoffmann.

Answer: (B) A-IV, B-I, C-II, D-III

अवधारणा: प्रत्येक ऐमीनो अम्ल के पार्श्व-शृंखला क्रियात्मक समूह तथा उसके अभिलाक्षणिक परीक्षण को पहचानिए।

  1. ग्लूटामीन: –CH2CH2CONH2 (1° ऐमाइड) → हॉफमान ब्रोमैमाइड निम्नीकरण → IV।
  2. लाइसीन: –(CH2)4NH2 (1° ऐमीन) → हिंसबर्ग परीक्षण → I।
  3. टाइरोसीन: –CH2C6H4OH (फीनॉल) → उदासीन FeCl3 से बैंगनी रंग → II।
  4. सेरीन: –CH2OH (ऐल्कोहॉल) → सेरिक अमोनियम नाइट्रेट परीक्षण (लाल रंग) → III।
  5. (A) तथा (D) में टाइरोसीन का परीक्षण गलत है; (C) में ग्लूटामीन को CAN दिया गया है – गलत।

शॉर्ट ट्रिक: फीनॉल → FeCl3, ऐल्कोहॉल → CAN, ऐमीन → हिंसबर्ग, ऐमाइड → हॉफमान।

उत्तर: (B) A-IV, B-I, C-II, D-III

JEE Main 2026 (April) – Paper 1 (B.E./B.Tech)ChemistryBiomolecules – amino acid side-chain testsJEE Main 2026 (April) – Paper 1 (B.E./B.Tech) 2026 · 6 Apr Shift 1