JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) · 750 questions

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

750 questions.

Q181.
A uniform magnetic field of 0.4 T acts perpendicular to a circular copper disc 20 cm in radius. The disc is having a uniform angular velocity of 10π rad s−1 about an axis through its centre and perpendicular to the disc. What is the potential difference developed between the axis of the disc and the rim? (π=3.14)
0.4 T का एकसमान चुम्बकीय क्षेत्र 20 cm त्रिज्या की वृत्ताकार ताँबे की चकती के लम्बवत कार्य करता है। चकती अपने केंद्र से गुजरने वाली तथा चकती के लम्बवत अक्ष के परितः 10π rad s−1 के एकसमान कोणीय वेग से घूम रही है। चकती की अक्ष और रिम (परिधि) के बीच उत्पन्न विभवान्तर क्या है? (π=3.14)
  1. A0.5024 V
  2. B0.0628 V
  3. C0.2512 V
  4. D0.1256 V
Show answer

Concept: For a disc rotating in a perpendicular field, the EMF between centre and rim is ε=12BωR2.

  1. B=0.4 T, ω=10π rad/s, R=0.2 m.
  2. ε=12×0.4×10π×(0.2)2=0.08π V.
  3. ε=0.08×3.14=0.2512 V.

Short trick: Average of rim speed field sweep: ε=12BωR2 — plug and multiply.

Answer: (C) 0.2512 V

अवधारणा: लम्बवत क्षेत्र में घूमती चकती के केंद्र और रिम के बीच विद्युत वाहक बल ε=12BωR2 होता है।

  1. B=0.4 T, ω=10π rad/s, R=0.2 m।
  2. ε=12×0.4×10π×(0.2)2=0.08π V।
  3. ε=0.08×3.14=0.2512 V।

शॉर्ट ट्रिक: सीधे ε=12BωR2 में मान रखकर गुणा कीजिए।

उत्तर: (C) 0.2512 V

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – rotating discJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q182.

An infinite wire has a circular bend of radius a, and carrying a current I as shown in figure. The magnitude of magnetic field at the origin O of the arc is given by :

एक अनंत तार में a त्रिज्या का वृत्ताकार मोड़ है और इसमें चित्रानुसार धारा I प्रवाहित है। चाप के मूल बिंदु O पर चुम्बकीय क्षेत्र का परिमाण है :
  1. Aμ04πIa[π2+1]
  2. Bμ04πIa[3π2+2]
  3. Cμ02πIa[π2+2]
  4. Dμ04πIa[3π2+1]
Show answer

Concept: Arc of angle θ: B=μ0I4πaθ. Semi-infinite straight wire whose end lies at the foot of the perpendicular from the point: B=μ0I4πa. A wire along a line through the point gives zero field.

  1. The circular bend subtends 3π2 at O (a quarter is replaced by the two straight leads): B1=μ0I4πa⋅3π2, into the page.
  2. The lower straight wire runs from the point directly below O (distance a) to infinity: B2=μ0I4πa(sin⁡0∘+sin⁡90∘)=μ0I4πa, also into the page.
  3. The upper straight wire lies along a line passing through O, so it contributes zero.
  4. B=B1+B2=μ04πIa[3π2+1].

Short trick: Memorise: full loop →2π, each semi-infinite end-on wire →1, wire through the point →0 (all in units of μ0I/4πa).

Answer: (D) μ04πIa[3π2+1]

अवधारणा: θ कोण के चाप के लिए: B=μ0I4πaθ। ऐसा अर्ध-अनंत सीधा तार जिसका सिरा बिंदु से डाले गए लम्ब के पाद पर हो: B=μ0I4πa। बिंदु से होकर जाने वाली रेखा पर स्थित तार का क्षेत्र शून्य होता है।

  1. वृत्ताकार मोड़ O पर 3π2 कोण बनाता है (एक चौथाई भाग के स्थान पर दो सीधे तार हैं): B1=μ0I4πa⋅3π2, कागज के भीतर की ओर।
  2. नीचे वाला सीधा तार O के ठीक नीचे (a दूरी पर) स्थित बिंदु से अनंत तक जाता है: B2=μ0I4πa(sin⁡0∘+sin⁡90∘)=μ0I4πa, यह भी भीतर की ओर।
  3. ऊपर वाला सीधा तार O से गुजरने वाली रेखा पर है, अतः उसका योगदान शून्य है।
  4. B=B1+B2=μ04πIa[3π2+1]।

शॉर्ट ट्रिक: याद रखिए: पूर्ण लूप →2π, लम्ब-पाद पर सिरे वाला अर्ध-अनंत तार →1, बिंदु से गुजरता तार →0 (सभी μ0I/4πa के मात्रक में)।

उत्तर: (D) μ04πIa[3π2+1]

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsMoving Charges & Magnetism – field of wire and arcJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q183.
In a long glass tube, mixture of two liquids A and B with refractive indices 1.3 and 1.4 respectively, forms a convex refractive meniscus towards A. If an object placed at 13 cm from the vertex of the meniscus in A forms an image with a magnification of '−2' then the radius of curvature of meniscus is :
एक लम्बी काँच की नली में क्रमशः 1.3 तथा 1.4 अपवर्तनांक वाले दो द्रवों A और B का मिश्रण, A की ओर उत्तल अपवर्तक नवचंद्रक (मेनिस्कस) बनाता है। यदि द्रव A में नवचंद्रक के शीर्ष से 13 cm दूरी पर रखी वस्तु '−2' आवर्धन वाला प्रतिबिम्ब बनाती है, तो नवचंद्रक की वक्रता त्रिज्या है :
  1. A13 cm
  2. B43 cm
  3. C1 cm
  4. D23 cm
Show answer

Concept: Refraction at a single spherical surface: n2v−n1u=n2−n1R, with magnification m=n1vn2u. Light travels from A (n1=1.3) into B (n2=1.4).

  1. u=−13 cm. m=−2=1.3v1.4×(−13)⇒v=−2×1.4×(−13)1.3=+28 cm.
  2. 1.428−1.3−13=0.1R.
  3. 0.05+0.1=0.15=0.1R⇒R=0.10.15=23 cm.

Short trick: 1.313=0.1 and 1.428=0.05 — the arithmetic is designed to be clean.

Answer: (D) 23 cm

अवधारणा: एकल गोलीय पृष्ठ पर अपवर्तन: n2v−n1u=n2−n1R, तथा आवर्धन m=n1vn2u। प्रकाश A (n1=1.3) से B (n2=1.4) में जाता है।

  1. u=−13 cm। m=−2=1.3v1.4×(−13)⇒v=−2×1.4×(−13)1.3=+28 cm।
  2. 1.428−1.3−13=0.1R।
  3. 0.05+0.1=0.15=0.1R⇒R=0.10.15=23 cm।

शॉर्ट ट्रिक: 1.313=0.1 तथा 1.428=0.05 — गणना जान-बूझकर सरल रखी गई है।

उत्तर: (D) 23 cm

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRay Optics – refraction at spherical surfaceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q184.
A 400 g solid cube having an edge of length 10 cm floats in water. How much volume of the cube is outside the water? (Given : density of water =1000 kg m−3)
10 cm भुजा वाला 400 g का एक ठोस घन जल में तैरता है। घन का कितना आयतन जल के बाहर है? (दिया है : जल का घनत्व =1000 kg m−3)
  1. A1400 cm3
  2. B600 cm3
  3. C4000 cm3
  4. D400 cm3
Show answer

Concept: Floating equilibrium: weight = buoyant force, so the submerged volume satisfies Vsubρw=m.

  1. Total volume of cube =103=1000 cm3.
  2. Vsub=mρw=400 g1 g/cm3=400 cm3.
  3. Volume outside water =1000−400=600 cm3.

Short trick: In water (density 1 g/cm³), submerged volume in cm³ = mass in grams.

Answer: (B) 600 cm3

अवधारणा: प्लवन साम्य: भार = उत्प्लावन बल, अतः डूबा हुआ आयतन Vsubρw=m को संतुष्ट करता है।

  1. घन का कुल आयतन =103=1000 cm3।
  2. Vsub=mρw=400 g1 g/cm3=400 cm3।
  3. जल के बाहर आयतन =1000−400=600 cm3।

शॉर्ट ट्रिक: जल (घनत्व 1 g/cm³) में डूबा आयतन (cm³ में) = द्रव्यमान (ग्राम में)।

उत्तर: (B) 600 cm3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsFluid Mechanics – flotationJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q185.
Given below are two statements. One is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : Knowing initial position x0 and initial momentum p0 is enough to determine the position and momentum at any time t for a simple harmonic motion with a given angular frequency ω.
Reason (R) : The amplitude and phase can be expressed in terms of x0 and p0.
In the light of the above statements, choose the correct answer from the options given below :
नीचे दो कथन दिए गए हैं। एक को अभिकथन (A) तथा दूसरे को कारण (R) कहा गया है।
अभिकथन (A) : दिए गए कोणीय आवृत्ति ω वाली सरल आवर्त गति के लिए प्रारंभिक स्थिति x0 तथा प्रारंभिक संवेग p0 का ज्ञान, किसी भी समय t पर स्थिति और संवेग ज्ञात करने के लिए पर्याप्त है।
कारण (R) : आयाम तथा कला को x0 तथा p0 के पदों में व्यक्त किया जा सकता है।
उपर्युक्त कथनों के आलोक में, नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :
  1. A(A) is false but (R) is true(A) असत्य है परन्तु (R) सत्य है
  2. B(A) is true but (R) is false(A) सत्य है परन्तु (R) असत्य है
  3. CBoth (A) and (R) are true but (R) is NOT the correct explanation of (A)(A) और (R) दोनों सत्य हैं परन्तु (R), (A) की सही व्याख्या नहीं है
  4. DBoth (A) and (R) are true and (R) is the correct explanation of (A)(A) और (R) दोनों सत्य हैं तथा (R), (A) की सही व्याख्या है
Show answer

Concept: SHM is fully specified by amplitude A, phase ϕ and ω: x(t)=Asin⁡(ωt+ϕ).

  1. At t=0: x0=Asin⁡ϕ and p0=mωAcos⁡ϕ.
  2. These give A=x02+(p0mω)2 and tan⁡ϕ=mωx0p0 — so (R) is true.
  3. Once A and ϕ are known (with given ω), x(t) and p(t)=mωAcos⁡(ωt+ϕ) are known at every t — so (A) is true.
  4. (R) is exactly why (A) holds: the initial data fix the two unknown constants of the motion. Hence (A) and (B) are wrong since both statements are true, and (C) is wrong because (R) does explain (A).

Short trick: SHM has two arbitrary constants; two initial conditions determine them completely.

Answer: (D) Both (A) and (R) are true and (R) is the correct explanation of (A)

अवधारणा: सरल आवर्त गति आयाम A, कला ϕ तथा ω से पूर्णतः निर्धारित होती है: x(t)=Asin⁡(ωt+ϕ)।

  1. t=0 पर: x0=Asin⁡ϕ तथा p0=mωAcos⁡ϕ।
  2. इनसे A=x02+(p0mω)2 तथा tan⁡ϕ=mωx0p0 प्राप्त होते हैं — अतः (R) सत्य है।
  3. A और ϕ ज्ञात होने पर (दिए गए ω के साथ) प्रत्येक t पर x(t) तथा p(t)=mωAcos⁡(ωt+ϕ) ज्ञात हो जाते हैं — अतः (A) सत्य है।
  4. (R) ही (A) के सत्य होने का कारण है: प्रारंभिक मान गति के दोनों अज्ञात स्थिरांकों को निश्चित कर देते हैं। इसलिए (A) और (B) गलत हैं क्योंकि दोनों कथन सत्य हैं, और (C) गलत है क्योंकि (R), (A) की व्याख्या करता है।

शॉर्ट ट्रिक: सरल आवर्त गति में दो स्वेच्छ स्थिरांक होते हैं; दो प्रारंभिक शर्तें उन्हें पूर्णतः निर्धारित कर देती हैं।

उत्तर: (D) (A) और (R) दोनों सत्य हैं तथा (R), (A) की सही व्याख्या है

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsOscillations – SHMJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q186.
A uniform rod of mass 250 g having length 100 cm is balanced on a sharp edge at 40 cm mark. A mass of 400 g is suspended at 10 cm mark. To maintain the balance of the rod, the mass to be suspended at 90 cm mark, is
250 g द्रव्यमान तथा 100 cm लम्बाई की एक एकसमान छड़ 40 cm चिह्न पर एक तीक्ष्ण किनारे पर संतुलित है। 10 cm चिह्न पर 400 g का द्रव्यमान लटकाया गया है। छड़ का संतुलन बनाए रखने के लिए 90 cm चिह्न पर लटकाया जाने वाला द्रव्यमान है
  1. A190 g
  2. B200 g
  3. C300 g
  4. D290 g
Show answer

Concept: For rotational equilibrium about the edge, net torque = 0. The rod's weight acts at its centre (50 cm mark).

  1. Anticlockwise torque (about 40 cm): 400g×(40−10)=400g×30.
  2. Clockwise torques: rod's weight 250g×(50−40)=250g×10, and mg×(90−40)=mg×50.
  3. Balance: 400×30=250×10+50m⇒12000−2500=50m.
  4. m=950050=190 g.

Short trick: Work in gram-cm; g cancels throughout.

Answer: (A) 190 g

अवधारणा: किनारे के परितः घूर्णी साम्य के लिए कुल बल आघूर्ण = 0। छड़ का भार उसके केंद्र (50 cm चिह्न) पर कार्य करता है।

  1. वामावर्त बल आघूर्ण (40 cm के परितः): 400g×(40−10)=400g×30।
  2. दक्षिणावर्त बल आघूर्ण: छड़ का भार 250g×(50−40)=250g×10, तथा mg×(90−40)=mg×50।
  3. संतुलन: 400×30=250×10+50m⇒12000−2500=50m।
  4. m=950050=190 g।

शॉर्ट ट्रिक: ग्राम-सेमी में गणना कीजिए; g हर जगह निरस्त हो जाता है।

उत्तर: (A) 190 g

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsRotational Motion – torque and equilibriumJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q187.
Earth has mass 8 times and radius 2 times that of a planet. If the escape velocity from the earth is 11.2 km/s, the escape velocity in km/s from the planet will be :
पृथ्वी का द्रव्यमान किसी ग्रह के द्रव्यमान का 8 गुना तथा त्रिज्या 2 गुनी है। यदि पृथ्वी से पलायन वेग 11.2 km/s है, तो उस ग्रह से पलायन वेग km/s में होगा :
  1. A2.8
  2. B11.2
  3. C5.6
  4. D8.4
Show answer

Concept: Escape velocity ve=2GMR, so ve∝M/R.

  1. ve,earthve,planet=MEMP⋅RPRE=8×12=4=2.
  2. ve,planet=11.22=5.6 km/s.

Short trick: 8/2=2 — just halve 11.2.

Answer: (C) 5.6

अवधारणा: पलायन वेग ve=2GMR, अतः ve∝M/R।

  1. ve,पृथ्वीve,ग्रह=MEMP⋅RPRE=8×12=4=2।
  2. ve,ग्रह=11.22=5.6 km/s।

शॉर्ट ट्रिक: 8/2=2 — 11.2 का आधा कर दीजिए।

उत्तर: (C) 5.6

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsGravitation – escape velocityJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q188.
The magnetic field of an E.M. wave is given by B→=(32i^+12j^)30sin⁡[ω(t−zc)] (S.I. Units). The corresponding electric field in S.I. units is :
किसी विद्युत चुम्बकीय तरंग का चुम्बकीय क्षेत्र B→=(32i^+12j^)30sin⁡[ω(t−zc)] (S.I. मात्रक) है। संगत विद्युत क्षेत्र S.I. मात्रकों में है :
  1. AE→=(12i^−32j^)30csin⁡[ω(t−zc)]
  2. BE→=(34i^+14j^)30ccos⁡[ω(t−zc)]
  3. CE→=(12i^+32j^)30csin⁡[ω(t+zc)]
  4. DE→=(32i^−12j^)30csin⁡[ω(t+zc)]
Show answer

Concept: In an EM wave, |E→|=c|B→|, E→⊥B→, and E→×B→ points along propagation. Phase of E→ and B→ is the same.

  1. The wave moves along +z^ (phase t−z/c), so E^×B^=z^, i.e. E^=B^×z^.
  2. B^=32i^+12j^, so E^=(32i^+12j^)×z^=12i^−32j^ (check: E^×B^=(14+34)z^=z^ ✓).
  3. Magnitude =30c, same sine phase ω(t−z/c).
  4. So E→=(12i^−32j^)30csin⁡[ω(t−zc)]. (B) has wrong (non-unit) direction and cosine phase; (C) and (D) carry phase t+z/c of a wave moving along −z.

Short trick: Rotate B^ by 90∘ clockwise (for +z propagation) and multiply by c.

Answer: (A) E→=(12i^−32j^)30csin⁡[ω(t−zc)]

अवधारणा: विद्युत चुम्बकीय तरंग में |E→|=c|B→|, E→⊥B→, तथा E→×B→ संचरण की दिशा में होता है। E→ और B→ की कला समान रहती है।

  1. तरंग +z^ दिशा में चलती है (कला t−z/c), अतः E^×B^=z^, अर्थात E^=B^×z^।
  2. B^=32i^+12j^ से E^=12i^−32j^ (जाँच: E^×B^=(14+34)z^=z^ ✓)।
  3. परिमाण =30c, वही sine कला ω(t−z/c)।
  4. अतः E→=(12i^−32j^)30csin⁡[ω(t−zc)]। विकल्प (B) में दिशा गलत (एकांक सदिश नहीं) तथा cosine कला है; (C) और (D) में कला t+z/c है, जो −z दिशा में चलती तरंग की होती है।

शॉर्ट ट्रिक: +z संचरण के लिए B^ को 90∘ दक्षिणावर्त घुमाइए और c से गुणा कीजिए।

उत्तर: (A) E→=(12i^−32j^)30csin⁡[ω(t−zc)]

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic WavesJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q189.
The kinetic energy of translation of the molecules in 50 g of CO2 gas at 17∘C is
17∘C पर 50 g CO2 गैस के अणुओं की स्थानान्तरीय गतिज ऊर्जा है
  1. A4205.5 J
  2. B4102.8 J
  3. C3582.7 J
  4. D3986.3 J
Show answer

Concept: Translational kinetic energy of n moles of any gas: KEtrans=32nRT (independent of the gas being polyatomic).

  1. n=5044 mol (molar mass of CO2 = 44 g/mol); T=17+273=290 K.
  2. KE=32×5044×8.3×290.
  3. =32×1.136×2407≈4102.8 J.

Short trick: Only the translational part counts: always 32nRT, never 52 or 62, whatever the molecule.

Answer: (B) 4102.8 J

अवधारणा: किसी भी गैस के n मोल की स्थानान्तरीय गतिज ऊर्जा: KEtrans=32nRT (गैस बहुपरमाणुक हो तब भी यही)।

  1. n=5044 mol (CO2 का मोलर द्रव्यमान = 44 g/mol); T=17+273=290 K।
  2. KE=32×5044×8.3×290।
  3. =32×1.136×2407≈4102.8 J।

शॉर्ट ट्रिक: केवल स्थानान्तरीय भाग लेना है: अणु चाहे जैसा हो, सदैव 32nRT, कभी 52 या 62 नहीं।

उत्तर: (B) 4102.8 J

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsKinetic Theory of GasesJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q190.
Which of the following phenomena can not be explained by wave theory of light?
निम्नलिखित में से कौन-सी परिघटना प्रकाश के तरंग सिद्धांत से स्पष्ट नहीं की जा सकती?
  1. ACompton effectकॉम्पटन प्रभाव (Compton effect)
  2. BRefraction of lightप्रकाश का अपवर्तन
  3. CReflection of lightप्रकाश का परावर्तन
  4. DDiffraction of lightप्रकाश का विवर्तन
Show answer

Concept: Wave theory explains propagation phenomena; particle (photon) nature is needed for energy-quantum phenomena.

  1. Reflection and refraction follow directly from wave fronts (Huygens' principle) — so (C) and (B) are explained by waves.
  2. Diffraction is a hallmark of waves — (D) is explained by wave theory.
  3. The Compton effect — the increase in wavelength of X-rays scattered by electrons — requires photons carrying momentum hλ colliding like particles; wave theory cannot account for the wavelength shift.

Short trick: Photoelectric and Compton effects = photon physics; interference, diffraction, polarisation = wave physics.

Answer: (A) Compton effect

अवधारणा: तरंग सिद्धांत संचरण संबंधी परिघटनाएँ समझाता है; ऊर्जा-क्वांटम वाली परिघटनाओं के लिए कण (फोटॉन) प्रकृति चाहिए।

  1. परावर्तन और अपवर्तन तरंगाग्रों (हाइगेन्स के सिद्धांत) से सीधे प्राप्त होते हैं — अतः (C) और (B) तरंगों से स्पष्ट हो जाते हैं।
  2. विवर्तन तरंगों की पहचान है — (D) तरंग सिद्धांत से स्पष्ट है।
  3. कॉम्पटन प्रभाव — इलेक्ट्रॉनों से प्रकीर्णित X-किरणों की तरंगदैर्घ्य में वृद्धि — के लिए संवेग hλ वाले फोटॉनों का कणों की तरह टकराना आवश्यक है; तरंग सिद्धांत इस तरंगदैर्घ्य परिवर्तन की व्याख्या नहीं कर सकता।

शॉर्ट ट्रिक: प्रकाश-विद्युत व कॉम्पटन प्रभाव = फोटॉन भौतिकी; व्यतिकरण, विवर्तन, ध्रुवण = तरंग भौतिकी।

उत्तर: (A) कॉम्पटन प्रभाव

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsDual Nature of Radiation – wave vs photonJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q191.
A balloon and its content having mass M is moving up with an acceleration 'a'. The mass that must be released from the content so that the balloon starts moving up with an acceleration '3a' will be (Take 'g' as acceleration due to gravity)
M द्रव्यमान का एक गुब्बारा अपनी सामग्री सहित 'a' त्वरण से ऊपर की ओर गतिमान है। सामग्री में से कितना द्रव्यमान छोड़ना होगा कि गुब्बारा '3a' त्वरण से ऊपर की ओर चलने लगे? ('g' को गुरुत्वीय त्वरण लीजिए)
  1. A2Ma3a+g
  2. B3Ma2a−g
  3. C3Ma2a+g
  4. D2Ma3a−g
Show answer

Concept: The upthrust (buoyant force) F on the balloon stays the same; only the weight changes when mass m is released.

  1. Initially: F−Mg=Ma⇒F=M(g+a).
  2. After releasing mass m: F−(M−m)g=(M−m)3a.
  3. Substitute F: M(g+a)−(M−m)g=3a(M−m).
  4. Ma+mg=3aM−3am⇒m(g+3a)=2aM.
  5. m=2Ma3a+g.

Short trick: Subtract the two equations of motion directly: mg+3am=2Ma.

Answer: (A) 2Ma3a+g

अवधारणा: गुब्बारे पर उत्प्लावन बल F अपरिवर्तित रहता है; द्रव्यमान m छोड़ने पर केवल भार बदलता है।

  1. प्रारम्भ में: F−Mg=Ma⇒F=M(g+a)।
  2. द्रव्यमान m छोड़ने के बाद: F−(M−m)g=(M−m)3a।
  3. F रखने पर: M(g+a)−(M−m)g=3a(M−m)।
  4. Ma+mg=3aM−3am⇒m(g+3a)=2aM।
  5. m=2Ma3a+g।

शॉर्ट ट्रिक: गति के दोनों समीकरण सीधे घटाइए: mg+3am=2Ma।

उत्तर: (A) 2Ma3a+g

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsLaws of Motion – variable mass systemJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q192.
The ratio of vapour densities of two gases at the same temperature is 425, then the ratio of r.m.s. velocities will be :
समान ताप पर दो गैसों के वाष्प घनत्वों का अनुपात 425 है, तो उनकी वर्ग माध्य मूल (r.m.s.) चालों का अनुपात होगा :
  1. A254
  2. B25
  3. C52
  4. D425
Show answer

Concept: vrms=3RTM, and vapour density is proportional to molar mass M. At the same temperature vrms∝1M.

  1. M1M2=ρ1ρ2=425.
  2. v1v2=M2M1=254=52.

Short trick: Lighter gas is faster: invert the density ratio and take the square root.

Answer: (C) 52

अवधारणा: vrms=3RTM, तथा वाष्प घनत्व मोलर द्रव्यमान M के अनुक्रमानुपाती होता है। समान ताप पर vrms∝1M।

  1. M1M2=ρ1ρ2=425।
  2. v1v2=M2M1=254=52।

शॉर्ट ट्रिक: हल्की गैस तेज़ चलती है: घनत्व अनुपात को उलटकर वर्गमूल लीजिए।

उत्तर: (C) 52

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsKinetic Theory – r.m.s. speedJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q193.
A parallel plate capacitor of capacitance 1μF is charged to a potential difference of 20 V. The distance between plates is 1μm. The energy density between plates of capacitor is.
1μF धारिता के एक समांतर पट्टिका संधारित्र को 20 V विभवान्तर तक आवेशित किया गया है। पट्टिकाओं के बीच की दूरी 1μm है। संधारित्र की पट्टिकाओं के बीच ऊर्जा घनत्व है :
  1. A2×10−4 J/m3
  2. B1.8×105 J/m3
  3. C1.8×103 J/m3
  4. D2×102 J/m3
Show answer

Concept: Energy density of the electric field: u=12ε0E2, with E=Vd between the plates.

  1. E=2010−6=2×107 V/m.
  2. u=12×8.85×10−12×(2×107)2.
  3. =12×8.85×10−12×4×1014=1770≈1.8×103 J/m3.

Short trick: The capacitance value is a distractor — only V/d matters for energy density.

Answer: (C) 1.8×103 J/m3

अवधारणा: विद्युत क्षेत्र का ऊर्जा घनत्व: u=12ε0E2, जहाँ पट्टिकाओं के बीच E=Vd।

  1. E=2010−6=2×107 V/m।
  2. u=12×8.85×10−12×(2×107)2।
  3. =12×8.85×10−12×4×1014=1770≈1.8×103 J/m3।

शॉर्ट ट्रिक: धारिता का मान भटकाने के लिए है — ऊर्जा घनत्व के लिए केवल V/d चाहिए।

उत्तर: (C) 1.8×103 J/m3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsCapacitance – energy densityJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q194.
The frequency of revolution of the electron in Bohr's orbit varies with n, the principal quantum number as
बोर कक्षा में इलेक्ट्रॉन के परिक्रमण की आवृत्ति, मुख्य क्वांटम संख्या n के साथ किस प्रकार बदलती है?
  1. A1n4
  2. B1n2
  3. C1n
  4. D1n3
Show answer

Concept: In the Bohr model, orbital speed v∝1n and radius r∝n2.

  1. Frequency of revolution f=v2πr.
  2. f∝1/nn2=1n3.

Short trick: Remember the ladder: r∝n2, v∝n−1, f∝n−3, E∝n−2.

Answer: (D) 1n3

अवधारणा: बोर मॉडल में कक्षीय चाल v∝1n तथा त्रिज्या r∝n2।

  1. परिक्रमण आवृत्ति f=v2πr।
  2. f∝1/nn2=1n3।

शॉर्ट ट्रिक: क्रम याद रखिए: r∝n2, v∝n−1, f∝n−3, E∝n−2।

उत्तर: (D) 1n3

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsAtoms – Bohr modelJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q195.

In the circuit shown here, assuming threshold voltage of diode is negligibly small, then voltage VAB is correctly represented by :

यहाँ दिखाए गए परिपथ में, डायोड की देहली वोल्टता (threshold voltage) को नगण्य मानते हुए, वोल्टता VAB को सही रूप में निरूपित करता है :
  1. AVAB would be zero at all timesVAB सभी समयों पर शून्य रहेगी
  2. B
  3. C
  4. D
Show answer

Concept: The diode conducts only when forward biased; VAB equals the drop across R (A and B are the terminals of the R branch). With no current, the drop across R is zero.

  1. During the half cycle with the top source terminal positive, the required current direction through the bottom wire is from B towards the source — opposite to the diode arrow. The diode is reverse biased, no current flows, so VAB=0.
  2. During the other half cycle the diode is forward biased; current flows through R from B to A, making VA<VB, i.e. VAB=V0sin⁡ωt (negative).
  3. So VAB is zero for one half cycle and reproduces the negative half-sine in the other: negative half-wave pulses. (A) is wrong since current does flow half the time; (B) has the wrong polarity; (C) would need the diode to conduct both ways.

Short trick: A series diode passes only one half cycle — check its arrow to pick the sign of the surviving humps.

Answer: (D) negative half-cycle pulses

अवधारणा: डायोड केवल अग्र अभिनति (forward bias) में चालन करता है; VAB, R के सिरों का विभवान्तर है (A और B, R शाखा के सिरे हैं)। धारा न बहे तो R पर विभव पात शून्य होता है।

  1. जिस अर्ध चक्र में स्रोत का ऊपरी सिरा धनात्मक होता है, उसमें नीचे के तार में आवश्यक धारा की दिशा B से स्रोत की ओर होती — जो डायोड के तीर के विपरीत है। डायोड पश्च अभिनत रहता है, धारा नहीं बहती, अतः VAB=0।
  2. दूसरे अर्ध चक्र में डायोड अग्र अभिनत होता है; धारा R में B से A की ओर बहती है, जिससे VA<VB, अर्थात VAB=V0sin⁡ωt (ऋणात्मक)।
  3. अतः VAB एक अर्ध चक्र में शून्य और दूसरे में ऋणात्मक अर्ध-ज्या: ऋणात्मक अर्ध-तरंग स्पंद। (A) गलत है क्योंकि आधे समय धारा बहती है; (B) में ध्रुवता उलटी है; (C) के लिए डायोड को दोनों दिशाओं में चालन करना पड़ता।

शॉर्ट ट्रिक: श्रेणी में लगा डायोड केवल एक अर्ध चक्र पारित करता है — बचे हुए स्पंदों का चिह्न डायोड के तीर से तय कीजिए।

उत्तर: (D) ऋणात्मक अर्ध-चक्र स्पंद

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsSemiconductors – diode circuitJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q196.
A thin transparent film with refractive index 1.4, is held on circular ring of radius 1.8 cm. The fluid in the film evaporates such that transmission through the film at wavelength 560 nm goes to a minimum every 12 seconds. Assuming that the film is flat on its two sides, the rate of evaporation is ____ π×10−13 m3/s.
1.4 अपवर्तनांक वाली एक पतली पारदर्शी फिल्म 1.8 cm त्रिज्या के वृत्ताकार छल्ले पर लगी है। फिल्म का द्रव इस प्रकार वाष्पित होता है कि 560 nm तरंगदैर्घ्य पर फिल्म से पारगमन (transmission) प्रत्येक 12 सेकंड में न्यूनतम हो जाता है। फिल्म को दोनों ओर से समतल मानते हुए, वाष्पन की दर ____ π×10−13 m3/s है।
Show answer

Concept: Successive transmission minima of a parallel film occur each time the optical path 2μt changes by one wavelength, i.e. the thickness changes by Δt=λ2μ.

  1. Δt=560×10−92×1.4=2×10−7 m, lost every 12 s.
  2. Film area =πr2=π(0.018)2=3.24×10−4π m2.
  3. Rate of evaporation =AΔt12=π×3.24×10−4×2×10−712.
  4. =π×6.48×10−1112=5.4×10−12π=54π×10−13 m3/s.

Short trick: Volume rate =πr2⋅λ2μT in one line.

Answer: 54

अवधारणा: समांतर फिल्म के क्रमागत पारगमन निम्निष्ठ तब आते हैं जब प्रकाशिक पथ 2μt एक तरंगदैर्घ्य से बदलता है, अर्थात मोटाई में परिवर्तन Δt=λ2μ हो।

  1. Δt=560×10−92×1.4=2×10−7 m, प्रत्येक 12 s में।
  2. फिल्म का क्षेत्रफल =πr2=π(0.018)2=3.24×10−4π m2।
  3. वाष्पन की दर =AΔt12=π×3.24×10−4×2×10−712।
  4. =π×6.48×10−1112=5.4×10−12π=54π×10−13 m3/s।

शॉर्ट ट्रिक: आयतन दर =πr2⋅λ2μT — एक ही पंक्ति में।

उत्तर: 54

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsWave Optics – thin film interferenceJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q197.
The value of current I in the electrical circuit as given below, when potential at A is equal to the potential at B,

will be ____ A.
नीचे दिए गए विद्युत परिपथ में, जब A का विभव B के विभव के बराबर है,

तब धारा I का मान ____ A होगा।
Show answer

Concept: With VA=VB no current flows through the 30 Ω branch (balanced-bridge condition), so the two horizontal branches carry independent currents from the same 40 V source.

  1. Let I1 flow in the top branch (10 Ω, 20 Ω) and I2 in the bottom branch (R, 40 Ω).
  2. VA=VB gives, from the left node: 10I1=RI2, and from the right node: 20I1=40I2⇒I1=2I2. Hence R=20 Ω.
  3. Branch resistances: top =30 Ω, bottom =60 Ω; parallel combination =30×6090=20 Ω.
  4. I=40 V20 Ω=2 A.

Short trick: Balanced bridge ⇒ delete the 30 Ω resistor; find R from the ratio condition, then it is one parallel combination.

Answer: 2

अवधारणा: VA=VB होने पर 30 Ω शाखा में धारा नहीं बहती (संतुलित सेतु की शर्त), अतः दोनों क्षैतिज शाखाएँ उसी 40 V स्रोत से स्वतंत्र धाराएँ लेती हैं।

  1. ऊपरी शाखा (10 Ω, 20 Ω) में I1 तथा निचली शाखा (R, 40 Ω) में I2 लीजिए।
  2. VA=VB से, बाएँ नोड से: 10I1=RI2, तथा दाएँ नोड से: 20I1=40I2⇒I1=2I2। अतः R=20 Ω।
  3. शाखा प्रतिरोध: ऊपरी =30 Ω, निचली =60 Ω; समांतर संयोजन =30×6090=20 Ω।
  4. I=40 V20 Ω=2 A।

शॉर्ट ट्रिक: संतुलित सेतु ⇒ 30 Ω प्रतिरोध हटा दीजिए; अनुपात शर्त से R निकालिए, फिर केवल एक समांतर संयोजन बचता है।

उत्तर: 2

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsCurrent Electricity – Wheatstone bridgeJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q198.
An electric dipole of dipole moment 6×10−6 Cm is placed in uniform electric field of magnitude 106 V/m. Initially, the dipole moment is parallel to electric field. The work that needs to be done on the dipole to make its dipole moment opposite to the field, will be ____ J.
6×10−6 Cm द्विध्रुव आघूर्ण का एक विद्युत द्विध्रुव 106 V/m परिमाण के एकसमान विद्युत क्षेत्र में रखा है। प्रारम्भ में द्विध्रुव आघूर्ण विद्युत क्षेत्र के समांतर है। द्विध्रुव आघूर्ण को क्षेत्र के विपरीत करने के लिए द्विध्रुव पर किया जाने वाला कार्य ____ J होगा।
Show answer

Concept: Potential energy of a dipole: U=−pEcos⁡θ. Work done by external agent =Uf−Ui.

  1. Initial (θ=0∘): Ui=−pE. Final (θ=180∘): Uf=+pE.
  2. W=Uf−Ui=2pE.
  3. W=2×6×10−6×106=12 J.

Short trick: Parallel → antiparallel always costs 2pE.

Answer: 12

अवधारणा: द्विध्रुव की स्थितिज ऊर्जा: U=−pEcos⁡θ। बाह्य कर्ता द्वारा किया गया कार्य =Uf−Ui।

  1. प्रारम्भिक (θ=0∘): Ui=−pE। अंतिम (θ=180∘): Uf=+pE।
  2. W=Uf−Ui=2pE।
  3. W=2×6×10−6×106=12 J।

शॉर्ट ट्रिक: समांतर → प्रतिसमांतर में सदैव 2pE कार्य लगता है।

उत्तर: 12

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectrostatics – electric dipoleJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q199.

A conducting bar moves on two conducting rails as shown in the figure. A constant magnetic field B exists into the page. The bar starts to move from the vertex at time t=0 with a constant velocity. If the induced EMF is E ∝tn, then value of n is _.

एक चालक छड़ चित्रानुसार दो चालक पटरियों पर चलती है। एक नियत चुम्बकीय क्षेत्र B कागज के भीतर की ओर विद्यमान है। छड़ समय t=0 पर शीर्ष (vertex) से नियत वेग से चलना प्रारम्भ करती है। यदि प्रेरित विद्युत वाहक बल E ∝tn है, तो n का मान _ है।
Show answer

Concept: Motional EMF =Bℓv, where ℓ is the effective length of the bar between the rails.

  1. The rails form a 'V'. At time t the bar is at distance x=vt from the vertex.
  2. The separation between the rails there is ℓ=2xtan⁡θ=2vttan⁡θ (2θ = opening angle), so ℓ∝t.
  3. EMF =Bℓv=2Bv2tan⁡θt∝t1.
  4. Hence n=1.

Short trick: With constant v only ℓ grows, and it grows linearly with t on straight rails.

Answer: 1

अवधारणा: गतिक विद्युत वाहक बल =Bℓv, जहाँ ℓ पटरियों के बीच छड़ की प्रभावी लम्बाई है।

  1. पटरियाँ 'V' आकार बनाती हैं। समय t पर छड़ शीर्ष से x=vt दूरी पर है।
  2. वहाँ पटरियों के बीच दूरी ℓ=2xtan⁡θ=2vttan⁡θ (2θ = खुलने का कोण), अतः ℓ∝t।
  3. विद्युत वाहक बल =Bℓv=2Bv2tan⁡θt∝t1।
  4. अतः n=1।

शॉर्ट ट्रिक: नियत v पर केवल ℓ बढ़ती है, और सीधी पटरियों पर यह t के साथ रैखिक बढ़ती है।

उत्तर: 1

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsElectromagnetic Induction – motional EMFJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2
Q200.
The volume contraction of a solid copper cube of edge length 10 cm, when subjected to a hydraulic pressure of 7×106 Pa, would be ____ mm3. (Given bulk modulus of copper =1.4×1011 N m−2)
10 cm भुजा वाले ठोस ताँबे के घन पर 7×106 Pa का द्रवचालित दाब लगाने पर उसके आयतन में संकुचन ____ mm3 होगा। (दिया है : ताँबे का आयतन प्रत्यास्थता गुणांक =1.4×1011 N m−2)
Show answer

Concept: Bulk modulus B=PΔV/V, so ΔV=PVB.

  1. V=(0.1)3=10−3 m3.
  2. ΔV=7×106×10−31.4×1011=5×10−8 m3.
  3. 1 m3=109 mm3, so ΔV=5×10−8×109=50 mm3.

Short trick: 71.4=5; keep track of the 109 factor for mm3.

Answer: 50

अवधारणा: आयतन प्रत्यास्थता गुणांक B=PΔV/V, अतः ΔV=PVB।

  1. V=(0.1)3=10−3 m3।
  2. ΔV=7×106×10−31.4×1011=5×10−8 m3।
  3. 1 m3=109 mm3, अतः ΔV=5×10−8×109=50 mm3।

शॉर्ट ट्रिक: 71.4=5; mm3 के लिए 109 गुणक का ध्यान रखिए।

उत्तर: 50

JEE Main 2025 (January) – Paper 1 (B.E./B.Tech)PhysicsMechanical Properties of Solids – bulk modulusJEE Main 2025 (January) – Paper 1 (B.E./B.Tech) 2025 · 28 Jan Shift 2