NEET UG · 2,240 questions

NEET UG 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

2,240 questions.

Q1701.
A potentiometer is an accurate and versatile device to make electrical measurements of E.M.F, because the method involves :
विभवमापी (potentiometer) विद्युत वाहक बल (E.M.F) के विद्युत मापन के लिए एक यथार्थ तथा बहुउपयोगी युक्ति है, क्योंकि इस विधि में निहित है :
  1. ACellsसेल
  2. BPotential gradientsविभव प्रवणता
  3. CA condition of no current flow through the galvanometerगैल्वेनोमीटर से कोई धारा प्रवाहित न होने की स्थिति
  4. DA combination of cells, galvanometer and resistancesसेलों, गैल्वेनोमीटर तथा प्रतिरोधों का संयोजन
Show answer

Concept: A potentiometer is a null-deflection method: at the balance point no current is drawn from the cell being measured.

  1. At balance, the galvanometer shows zero deflection, so the test cell supplies no current.
  2. With zero current there is no drop across the internal resistance, so the reading equals the true emf (not the terminal voltage).
  3. (A), (B) and (D) are parts/ingredients of every such circuit (a voltmeter set-up also has them); they are not the reason for its accuracy.

Short trick: Accuracy of potentiometer = "null method" = zero current through galvanometer at balance.

Answer: (C) A condition of no current flow through the galvanometer

अवधारणा: विभवमापी एक शून्य-विक्षेप (null) विधि है: संतुलन बिंदु पर मापे जाने वाले सेल से कोई धारा नहीं ली जाती।

  1. संतुलन पर गैल्वेनोमीटर में शून्य विक्षेप होता है, अतः परीक्षण सेल कोई धारा नहीं देता।
  2. धारा शून्य होने से आंतरिक प्रतिरोध पर कोई विभवपात नहीं होता, अतः पाठ्यांक वास्तविक emf के बराबर होता है (टर्मिनल वोल्टता नहीं)।
  3. (A), (B) व (D) तो हर ऐसे परिपथ के भाग हैं (वोल्टमीटर व्यवस्था में भी होते हैं); ये इसकी यथार्थता का कारण नहीं हैं।

शॉर्ट ट्रिक: विभवमापी की यथार्थता = "शून्य विधि" = संतुलन पर गैल्वेनोमीटर से शून्य धारा।

उत्तर: (C) गैल्वेनोमीटर से कोई धारा प्रवाहित न होने की स्थिति

NEET UGPhysicsCurrent electricity – potentiometerNEET UG 2017 · 7 May Shift 1
Q1702.
A gas mixture consists of 2 moles of O2 and 4 moles of Ar at temperature T. Neglecting all vibrational modes, the total internal energy of the system is
एक गैस मिश्रण में ताप T पर O2 के 2 मोल तथा Ar के 4 मोल हैं। सभी कम्पन विधाओं (vibrational modes) की उपेक्षा करते हुए, निकाय की कुल आंतरिक ऊर्जा है
  1. A4 RT
  2. B15 RT
  3. C9 RT
  4. D11 RT
Show answer

Concept: U=∑nf2RT; diatomic O2 (no vibration) has f = 5, monatomic Ar has f = 3.

  1. O2: U1=2×52RT=5RT
  2. Ar: U2=4×32RT=6RT
  3. U=5RT+6RT=11RT

Short trick: Internal energy = (sum of n·f)/2 × RT = (2×5 + 4×3)/2 RT = 22/2 RT.

Answer: (D) 11 RT

अवधारणा: U=∑nf2RT; द्विपरमाणुक O2 (कम्पन रहित) के लिए f = 5, एकपरमाणुक Ar के लिए f = 3।

  1. O2: U1=2×52RT=5RT
  2. Ar: U2=4×32RT=6RT
  3. U=5RT+6RT=11RT

शॉर्ट ट्रिक: आंतरिक ऊर्जा = (n·f का योग)/2 × RT = (2×5 + 4×3)/2 RT = 22/2 RT।

उत्तर: (D) 11 RT

NEET UGPhysicsKinetic theory – internal energy of gas mixtureNEET UG 2017 · 7 May Shift 1
Q1703.
Radioactive material 'A' has decay constant '8λ' and material 'B' has decay constant 'λ'. Initially they have same number of nuclei. After what time, the ratio of number of nuclei of material 'B' to that 'A' will be 1e ?
रेडियोऐक्टिव पदार्थ 'A' का क्षय नियतांक '8λ' तथा पदार्थ 'B' का क्षय नियतांक 'λ' है। प्रारम्भ में दोनों में नाभिकों की संख्या समान है। कितने समय पश्चात् पदार्थ 'B' के नाभिकों की संख्या का 'A' के नाभिकों की संख्या से अनुपात 1e होगा?
  1. A1λ
  2. B17λ
  3. C18λ
  4. D19λ
Show answer

Concept: N=N0e−λt. With equal N0, the ratio of the two samples depends only on the difference of decay constants.

  1. NBNA=e−λte−8λt=e7λt
  2. For every t≥0, e7λt≥1 (A decays faster, so B is always the larger sample).
  3. Setting e7λt=1e gives t=−17λ – a negative time, which is impossible.
  4. Only the reversed ratio NANB=1e gives t=17λ (option (B)), but that is not what the question asks.

Short trick: Faster-decaying sample (A) is always smaller, so B : A can never fall below 1 – a ratio of 1/e is impossible for B : A.

Answer: Bonus – as printed (B : A = 1/e) no positive time exists; none of the options is correct. (Reading it as A : B = 1/e would give (B) 17λ.)

अवधारणा: N=N0e−λt। समान N0 होने पर दोनों नमूनों का अनुपात केवल क्षय नियतांकों के अंतर पर निर्भर करता है।

  1. NBNA=e−λte−8λt=e7λt
  2. प्रत्येक t≥0 के लिए e7λt≥1 (A तेजी से क्षयित होता है, अतः B सदैव बड़ा नमूना रहता है)।
  3. e7λt=1e रखने पर t=−17λ मिलता है – ऋणात्मक समय, जो असंभव है।
  4. केवल उल्टा अनुपात NANB=1e लेने पर t=17λ (विकल्प (B)) आता है, परन्तु प्रश्न यह नहीं पूछता।

शॉर्ट ट्रिक: तेजी से क्षयित होने वाला नमूना (A) सदैव छोटा रहता है, अतः B : A कभी 1 से कम नहीं हो सकता – 1/e अनुपात असंभव है।

उत्तर: बोनस – जैसा छपा है (B : A = 1/e) उसके लिए कोई धनात्मक समय संभव नहीं; कोई भी विकल्प सही नहीं है। (A : B पढ़ने पर (B) 17λ आता।)

NEET UGPhysicsNuclei – radioactive decay lawNEET UG 2017 · 7 May Shift 1
Q1704.
A U tube with both ends open to the atmosphere, is partially filled with water. Oil, which is immiscible with water, is poured into one side until it stands at a distance of 10 mm above the water level on the other side. Meanwhile the water rises by 65 mm from its original level (see diagram). The density of the oil is
दोनों सिरों पर वायुमण्डल के लिए खुली एक U-नली में आंशिक रूप से जल भरा है। जल में अमिश्रणीय तेल को एक ओर तब तक डाला जाता है जब तक कि वह दूसरी ओर के जल तल से 10 mm ऊपर तक न आ जाए। इस बीच जल अपने मूल तल से 65 mm ऊपर उठ जाता है (आरेख देखिए)। तेल का घनत्व है
  1. A650 kg m–3
  2. B425 kg m–3
  3. C800 kg m–3
  4. D928 kg m–3
Show answer

Concept: Pressures at the same horizontal level in the same continuous liquid (water) are equal: p(B) = p(C).

  1. Water rises 65 mm on the right, so it falls 65 mm on the left: oil–water interface B is 65 + 65 = 130 mm below the final water level E.
  2. Oil column height = 130 + 10 = 140 mm; water column above C = 130 mm.
  3. pa+hoilρoilg=pa+hwρwg⇒140ρoil=130×1000
  4. ρoil=1314×1000≈928 kg m−3

Short trick: ρ_oil/ρ_water = (water column)/(oil column) = 130/140 – just under 1000, so only 928 fits.

Answer: (D) 928 kg m–3

अवधारणा: एक ही सतत द्रव (जल) में समान क्षैतिज तल पर दाब बराबर होते हैं: p(B) = p(C)।

  1. दाईं ओर जल 65 mm ऊपर उठता है, अतः बाईं ओर 65 mm नीचे जाता है: तेल–जल अंतरापृष्ठ B अंतिम जल तल E से 65 + 65 = 130 mm नीचे है।
  2. तेल स्तम्भ की ऊँचाई = 130 + 10 = 140 mm; C के ऊपर जल स्तम्भ = 130 mm।
  3. pa+hoilρoilg=pa+hwρwg⇒140ρoil=130×1000
  4. ρoil=1314×1000≈928 kg m−3

शॉर्ट ट्रिक: ρ_तेल/ρ_जल = (जल स्तम्भ)/(तेल स्तम्भ) = 130/140 – 1000 से थोड़ा कम, अतः केवल 928 उपयुक्त है।

उत्तर: (D) 928 kg m–3

NEET UGPhysicsMechanical properties of fluids – U-tube manometerNEET UG 2017 · 7 May Shift 1
Q1705.
A 250-Turn rectangular coil of length 2.1 cm and width 1.25 cm carries a current of 85 μA and subjected to a magnetic field of strength 0.85 T. Work done for rotating the coil by 180° against the torque is
लम्बाई 2.1 cm तथा चौड़ाई 1.25 cm की 250 फेरों वाली एक आयताकार कुण्डली में 85 μA धारा प्रवाहित हो रही है तथा इस पर 0.85 T तीव्रता का चुंबकीय क्षेत्र आरोपित है। बल-आघूर्ण के विरुद्ध कुण्डली को 180° घुमाने में किया गया कार्य है
  1. A9.1 μJ
  2. B4.55 μJ
  3. C2.3 μJ
  4. D1.15 μJ
Show answer

Concept: W=MB(cos⁡θ1−cos⁡θ2); from the stable position (θ=0∘) to 180∘, W=2MB with M=NIA.

  1. A=2.1×10−2×1.25×10−2=2.625×10−4 m2
  2. M=NIA=250×85×10−6×2.625×10−4=5.58×10−6 A m2
  3. W=2MB=2×5.58×10−6×0.85≈9.5×10−6 J
  4. The nearest option is 9.1 μJ; (B), (C), (D) are 1/2, 1/4, 1/8 of it (missing the factor 2 and more).

Short trick: Rotating by 180° against the torque always costs 2MB – twice MB, never MB/2.

Answer: (A) 9.1 μJ

अवधारणा: W=MB(cos⁡θ1−cos⁡θ2); स्थायी स्थिति (θ=0∘) से 180∘ तक, W=2MB जहाँ M=NIA।

  1. A=2.1×10−2×1.25×10−2=2.625×10−4 m2
  2. M=NIA=250×85×10−6×2.625×10−4=5.58×10−6 A m2
  3. W=2MB=2×5.58×10−6×0.85≈9.5×10−6 J
  4. निकटतम विकल्प 9.1 μJ है; (B), (C), (D) इसके 1/2, 1/4, 1/8 हैं (गुणक 2 आदि छूट जाने पर)।

शॉर्ट ट्रिक: बल-आघूर्ण के विरुद्ध 180° घुमाने में सदैव 2MB कार्य लगता है – MB का दोगुना, कभी MB/2 नहीं।

उत्तर: (A) 9.1 μJ

NEET UGPhysicsMoving charges and magnetism – work done on a current loopNEET UG 2017 · 7 May Shift 1
Q1706.
The de-Broglie wavelength of a neutron in thermal equilibrium with heavy water at a temperature T (Kelvin) and mass m, is
ताप T (केल्विन) पर भारी जल के साथ तापीय साम्य में स्थित द्रव्यमान m वाले एक न्यूट्रॉन का दे-ब्रॉग्ली तरंगदैर्ध्य है
  1. AhmkT
  2. Bh3mkT
  3. C2h3mkT
  4. D2hmkT
Show answer

Concept: λ=hp=h2mK and a thermal particle has average KE K=32kT.

  1. p=2mK=2m⋅32kT=3mkT
  2. λ=h3mkT

Short trick: Thermal particle: λ = h/√(3mkT) – the "3" comes from 3/2 kT; no factor 2 survives in the numerator.

Answer: (B) h3mkT

अवधारणा: λ=hp=h2mK तथा तापीय कण की औसत गतिज ऊर्जा K=32kT।

  1. p=2mK=2m⋅32kT=3mkT
  2. λ=h3mkT

शॉर्ट ट्रिक: तापीय कण: λ = h/√(3mkT) – "3", 3/2 kT से आता है; अंश में कोई गुणक 2 नहीं बचता।

उत्तर: (B) h3mkT

NEET UGPhysicsDual nature of matter – de Broglie wavelength of thermal neutronNEET UG 2017 · 7 May Shift 1
Q1707.
One end of string of length l is connected to a particle of mass 'm' and the other end is connected to a small peg on a smooth horizontal table. If the particle moves in circle with speed 'v', the net force on the particle (directed towards center) will be (T represents the tension in the string)
लम्बाई l की एक डोरी का एक सिरा द्रव्यमान 'm' के एक कण से तथा दूसरा सिरा एक चिकनी क्षैतिज मेज़ पर लगी एक छोटी खूँटी से जुड़ा है। यदि कण 'v' चाल से वृत्त में गति करता है, तो कण पर (केन्द्र की ओर निर्देशित) नेट बल होगा (T डोरी में तनाव दर्शाता है)
  1. AT
  2. BT+mv2l
  3. CT−mv2l
  4. DZeroशून्य
Show answer

Concept: On a smooth horizontal table, weight and normal reaction cancel; the only horizontal force is the tension, which itself provides the centripetal force.

  1. Net force toward centre = T (the only radial force).
  2. This net force equals mv2l; "centripetal force" is not an extra force to add or subtract, so (B) and (C) double-count it.
  3. It cannot be zero (D), since the velocity keeps changing direction.

Short trick: Centripetal force is a role, not a new force – here the tension plays that role.

Answer: (A) T

अवधारणा: चिकनी क्षैतिज मेज़ पर भार तथा अभिलम्ब प्रतिक्रिया संतुलित हो जाते हैं; केवल क्षैतिज बल तनाव है, जो स्वयं अभिकेन्द्र बल प्रदान करता है।

  1. केन्द्र की ओर नेट बल = T (एकमात्र त्रिज्य बल)।
  2. यही नेट बल mv2l के बराबर है; "अभिकेन्द्र बल" कोई अतिरिक्त बल नहीं जिसे जोड़ा या घटाया जाए, अतः (B) व (C) इसे दो बार गिनते हैं।
  3. यह शून्य (D) नहीं हो सकता, क्योंकि वेग की दिशा लगातार बदल रही है।

शॉर्ट ट्रिक: अभिकेन्द्र बल एक भूमिका है, नया बल नहीं – यहाँ तनाव यह भूमिका निभाता है।

उत्तर: (A) T

NEET UGPhysicsCircular motion – centripetal forceNEET UG 2017 · 7 May Shift 1
Q1708.
Figure shows a circuit contains three identical resistors with resistance R = 9.0 Ω each, two identical inductors with inductance L = 2.0 mH each, and an ideal battery with emf ε = 18 V. The current 'i' through the battery just after the switch closed is
चित्र में एक परिपथ दर्शाया गया है जिसमें प्रत्येक R = 9.0 Ω प्रतिरोध वाले तीन सर्वसम प्रतिरोधक, प्रत्येक L = 2.0 mH प्रेरकत्व वाले दो सर्वसम प्रेरक तथा emf ε = 18 V की एक आदर्श बैटरी है। स्विच बंद करने के ठीक बाद बैटरी से प्रवाहित धारा 'i' है
  1. A2 mA
  2. B0.2 A
  3. C2 A
  4. D0 ampere0 ऐम्पियर
Show answer

Concept: Just after closing: an inductor opposes any sudden change, so it carries zero current (open); an uncharged capacitor has zero voltage, so it acts as a short (plain wire).

  1. Branch 1 (L in series with R): the inductor is open → current 0.
  2. Branch 2 (R alone): i2=εR=189=2 A.
  3. Branch 3 (R in series with L ∥ C): the uncharged capacitor shorts the parallel L–C pair, so only R remains → i3=189=2 A.
  4. Battery current i=i2+i3=4 A – this value is not among the options. 2 A results only if the capacitor branch is (wrongly) treated as open.

Short trick: At t = 0⁺: L → open, uncharged C → wire; at t = ∞: L → wire, C → open.

Answer: Bonus – the circuit as drawn gives i = 4 A at t = 0⁺; none of the options is correct.

अवधारणा: स्विच बंद करने के ठीक बाद: प्रेरक धारा में अचानक परिवर्तन का विरोध करता है, अतः उसमें शून्य धारा होती है (खुला परिपथ); अनावेशित संधारित्र पर शून्य वोल्टता होती है, अतः वह लघुपथ (सामान्य तार) की तरह कार्य करता है।

  1. शाखा 1 (L, R के श्रेणी में): प्रेरक खुला → धारा 0।
  2. शाखा 2 (केवल R): i2=εR=189=2 A।
  3. शाखा 3 (R के श्रेणी में L ∥ C): अनावेशित संधारित्र समांतर L–C युग्म को लघुपथित कर देता है, केवल R बचता है → i3=189=2 A।
  4. बैटरी धारा i=i2+i3=4 A – यह मान विकल्पों में नहीं है। 2 A तभी आता है जब संधारित्र शाखा को (गलत रूप से) खुला माना जाए।

शॉर्ट ट्रिक: t = 0⁺ पर: L → खुला, अनावेशित C → तार; t = ∞ पर: L → तार, C → खुला।

उत्तर: बोनस – दर्शाए गए परिपथ से t = 0⁺ पर i = 4 A आता है; कोई भी विकल्प सही नहीं है।

NEET UGPhysicsElectromagnetic induction – LR/LC circuit just after switchingNEET UG 2017 · 7 May Shift 1
Q1709.
The x and y coordinates of the particle at any time are x = 5t – 2t2 and y = 10t respectively, where x and y are in meters and t in seconds. The acceleration of the particle at t = 2 s is
किसी कण के किसी भी समय पर x तथा y निर्देशांक क्रमशः x = 5t – 2t2 तथा y = 10t हैं, जहाँ x व y मीटर में तथा t सेकण्ड में है। t = 2 s पर कण का त्वरण है
  1. A0
  2. B5 m/s2
  3. C–4 m/s2
  4. D–8 m/s2
Show answer

Concept: Acceleration components are second time-derivatives of the coordinates.

  1. vx=dxdt=5−4t,ax=d2xdt2=−4 m/s2
  2. vy=10,ay=0
  3. Acceleration = −4i^ m/s² – constant, the same at t = 2 s.

Short trick: Only the t² term survives two differentiations: a = 2 × (coefficient of t²) = 2 × (–2) = –4.

Answer: (C) –4 m/s2

अवधारणा: त्वरण घटक, निर्देशांकों के समय के सापेक्ष द्वितीय अवकलज होते हैं।

  1. vx=dxdt=5−4t,ax=d2xdt2=−4 m/s2
  2. vy=10,ay=0
  3. त्वरण = −4i^ m/s² – नियत, t = 2 s पर भी यही।

शॉर्ट ट्रिक: दो बार अवकलन के बाद केवल t² पद बचता है: a = 2 × (t² का गुणांक) = 2 × (–2) = –4।

उत्तर: (C) –4 m/s2

NEET UGPhysicsMotion in a plane – acceleration from coordinatesNEET UG 2017 · 7 May Shift 1
Q1710.
Suppose the charge of a proton and an electron differ slightly. One of them is –e, the other is (e + Δe). If the net of electrostatic force and gravitational force between two hydrogen atoms placed at a distance d (much greater than atomic size) apart is zero, then Δe is of the order of [Given mass of hydrogen mh = 1.67 × 10–27 kg]
मान लीजिए प्रोटॉन तथा इलेक्ट्रॉन के आवेश में थोड़ा अंतर है। इनमें से एक –e है, दूसरा (e + Δe) है। यदि दूरी d (परमाणु आकार से बहुत अधिक) पर रखे दो हाइड्रोजन परमाणुओं के बीच स्थिरवैद्युत बल तथा गुरुत्वाकर्षण बल का परिणामी शून्य है, तो Δe की कोटि है [दिया है हाइड्रोजन का द्रव्यमान mh = 1.67 × 10–27 kg]
  1. A10–20 C
  2. B10–23 C
  3. C10–37 C
  4. D10–47 C
Show answer

Concept: Each H atom carries net charge Δe; electrostatic repulsion must balance gravitational attraction.

  1. 14πε0(Δe)2d2=Gmh2d2 (d cancels)
  2. (Δe)2=6.67×10−11×(1.67×10−27)29×109≈2.07×10−74
  3. Δe≈1.4×10−37 C → order 10−37 C

Short trick: Δe=mh4πε0G≈1.67×10−27×0.86×10−10∼10−37 C.

Answer: (C) 10–37 C

अवधारणा: प्रत्येक H परमाणु पर नेट आवेश Δe है; स्थिरवैद्युत प्रतिकर्षण को गुरुत्वाकर्षण आकर्षण से संतुलित होना चाहिए।

  1. 14πε0(Δe)2d2=Gmh2d2 (d कट जाता है)
  2. (Δe)2=6.67×10−11×(1.67×10−27)29×109≈2.07×10−74
  3. Δe≈1.4×10−37 C → कोटि 10−37 C

शॉर्ट ट्रिक: Δe=mh4πε0G≈1.67×10−27×0.86×10−10∼10−37 C।

उत्तर: (C) 10–37 C

NEET UGPhysicsElectrostatics – Coulomb force vs gravitationNEET UG 2017 · 7 May Shift 1
Q1711.
Two rods A and B of different materials are welded together as shown in figure. Their thermal conductivities are K1 and K2. The thermal conductivity of the composite rod will be
भिन्न पदार्थों की दो छड़ें A तथा B चित्रानुसार आपस में जोड़ी (वेल्ड की) गई हैं। इनकी ऊष्मा चालकताएँ K1 तथा K2 हैं। संयुक्त छड़ की ऊष्मा चालकता होगी
  1. AK1+K22
  2. B3(K1+K2)2
  3. CK1+K2
  4. D2(K1+K2)
Show answer

Concept: The rods lie side by side between the same ends T1, T2 → they conduct in parallel; heat currents add.

  1. H=K1A(T1−T2)d+K2A(T1−T2)d
  2. Composite rod of area 2A: H=Keq(2A)(T1−T2)d
  3. Keq=K1+K22

Short trick: Equal-area rods in parallel → simple average of K; in series (equal lengths) → 2K₁K₂/(K₁+K₂).

Answer: (A) K1+K22

अवधारणा: छड़ें समान सिरों T1, T2 के बीच साथ-साथ रखी हैं → ये समांतर क्रम में चालन करती हैं; ऊष्मा धाराएँ जुड़ती हैं।

  1. H=K1A(T1−T2)d+K2A(T1−T2)d
  2. क्षेत्रफल 2A वाली संयुक्त छड़: H=Keq(2A)(T1−T2)d
  3. Keq=K1+K22

शॉर्ट ट्रिक: समान क्षेत्रफल की समांतर छड़ें → K का सामान्य औसत; श्रेणी में (समान लम्बाई) → 2K₁K₂/(K₁+K₂)।

उत्तर: (A) K1+K22

NEET UGPhysicsThermal properties – conduction through rods in parallelNEET UG 2017 · 7 May Shift 1
Q1712.
The diagrams below show regions of equipotentials.

A positive charge is moved from A to B in each diagram.
नीचे दिए गए आरेख समविभव क्षेत्रों को दर्शाते हैं।

प्रत्येक आरेख में एक धनावेश को A से B तक ले जाया जाता है।
  1. AMaximum work is required to move q in figure (c).चित्र (c) में q को ले जाने में अधिकतम कार्य की आवश्यकता होती है।
  2. BIn all the four cases the work done is the same.चारों स्थितियों में किया गया कार्य समान है।
  3. CMinimum work is required to move q in figure (a).चित्र (a) में q को ले जाने में न्यूनतम कार्य की आवश्यकता होती है।
  4. DMaximum work is required to move q in figure (b).चित्र (b) में q को ले जाने में अधिकतम कार्य की आवश्यकता होती है।
Show answer

Concept: Electrostatic work depends only on end-point potentials: W=q(VB−VA) – not on path, shape or spacing of equipotentials.

  1. In every figure A lies on the 10 V surface and B on the 40 V surface.
  2. W=q(40−10)=30q in (a), (b), (c) and (d).
  3. So (A), (C), (D), which claim different works, are wrong.

Short trick: Conservative field → only start and end potentials matter; crowded or curved lines change E, not ΔV.

Answer: (B) In all the four cases the work done is the same.

अवधारणा: स्थिरवैद्युत कार्य केवल अंतिम बिन्दुओं के विभव पर निर्भर करता है: W=q(VB−VA) – पथ, आकृति या समविभव पृष्ठों की दूरी पर नहीं।

  1. प्रत्येक चित्र में A, 10 V पृष्ठ पर तथा B, 40 V पृष्ठ पर है।
  2. (a), (b), (c) व (d) सभी में W=q(40−10)=30q।
  3. अतः भिन्न कार्य बताने वाले (A), (C), (D) गलत हैं।

शॉर्ट ट्रिक: संरक्षी क्षेत्र → केवल प्रारम्भिक व अंतिम विभव मायने रखते हैं; सघन या वक्र रेखाएँ E बदलती हैं, ΔV नहीं।

उत्तर: (B) चारों स्थितियों में किया गया कार्य समान है।

NEET UGPhysicsElectrostatic potential – work across equipotentialsNEET UG 2017 · 7 May Shift 1
Q1713.
The ratio of wavelengths of the last line of Balmer series and the last line of Lyman series is
बामर श्रेणी की अंतिम रेखा तथा लाइमन श्रेणी की अंतिम रेखा के तरंगदैर्ध्यों का अनुपात है
  1. A2
  2. B1
  3. C4
  4. D0.5
Show answer

Concept: The last line (series limit) corresponds to a transition from n=∞: 1λ=R(1nf2−0)=Rnf2.

  1. Balmer (nf=2): λB=4R
  2. Lyman (nf=1): λL=1R
  3. λBλL=4

Short trick: Series-limit wavelength ∝ n_f² → Balmer : Lyman = 2² : 1² = 4.

Answer: (C) 4

अवधारणा: अंतिम रेखा (श्रेणी सीमा) n=∞ से संक्रमण के संगत है: 1λ=R(1nf2−0)=Rnf2।

  1. बामर (nf=2): λB=4R
  2. लाइमन (nf=1): λL=1R
  3. λBλL=4

शॉर्ट ट्रिक: श्रेणी-सीमा तरंगदैर्ध्य ∝ n_f² → बामर : लाइमन = 2² : 1² = 4।

उत्तर: (C) 4

NEET UGPhysicsAtoms – hydrogen spectrum series limitsNEET UG 2017 · 7 May Shift 1
Q1714.
Young's double slit experiment is first performed in air and then in a medium other than air. It is found that 8th bright fringe in the medium lies where 5th dark fringe lies in air. The refractive index of the medium is nearly
यंग का द्वि-झिरी प्रयोग पहले वायु में तथा फिर वायु के अतिरिक्त किसी अन्य माध्यम में किया जाता है। यह पाया जाता है कि माध्यम में 8वीं दीप्त फ्रिंज वहाँ स्थित है जहाँ वायु में 5वीं अदीप्त फ्रिंज स्थित है। माध्यम का अपवर्तनांक लगभग है
  1. A1.25
  2. B1.59
  3. C1.69
  4. D1.78
Show answer

Concept: In a medium λ becomes λ/μ, so fringe positions shrink by μ. Bright: yn=nλDμd; dark (air): yn=(2n−1)λD2d.

  1. 5th dark in air: y=9λD2d
  2. 8th bright in medium: y=8λDμd
  3. 92=8μ⇒μ=169≈1.78

Short trick: nth dark = (n – ½) fringe widths: 4.5 β_air = 8 β_medium → μ = 8/4.5.

Answer: (D) 1.78

अवधारणा: माध्यम में λ, λ/μ हो जाता है, अतः फ्रिंजों की स्थितियाँ μ गुना सिकुड़ जाती हैं। दीप्त: yn=nλDμd; अदीप्त (वायु): yn=(2n−1)λD2d।

  1. वायु में 5वीं अदीप्त: y=9λD2d
  2. माध्यम में 8वीं दीप्त: y=8λDμd
  3. 92=8μ⇒μ=169≈1.78

शॉर्ट ट्रिक: nवीं अदीप्त = (n – ½) फ्रिंज चौड़ाई: 4.5 β_वायु = 8 β_माध्यम → μ = 8/4.5।

उत्तर: (D) 1.78

NEET UGPhysicsWave optics – YDSE in a mediumNEET UG 2017 · 7 May Shift 1
Q1715.
A particle executes linear simple harmonic motion with an amplitude of 3 cm. When the particle is at 2 cm from the mean position, the magnitude of its velocity is equal to that of its acceleration. Then its time period in seconds is
एक कण 3 cm आयाम से रैखिक सरल आवर्त गति करता है। जब कण माध्य स्थिति से 2 cm पर है, तब उसके वेग का परिमाण उसके त्वरण के परिमाण के बराबर है। तब इसका आवर्तकाल (सेकण्ड में) है
  1. A5π
  2. B52π
  3. C4π5
  4. D2π3
Show answer

Concept: In SHM v=ωA2−x2 and |a|=ω2x.

  1. ω32−22=ω2(2)⇒ω5=2ω2
  2. ω=52 rad/s
  3. T=2πω=4π5 s

Short trick: v = a ⇒ ω = √(A² – x²)/x = √5/2, so T = 2π·x/√(A² – x²).

Answer: (C) 4π5

अवधारणा: सरल आवर्त गति में v=ωA2−x2 तथा |a|=ω2x।

  1. ω32−22=ω2(2)⇒ω5=2ω2
  2. ω=52 rad/s
  3. T=2πω=4π5 s

शॉर्ट ट्रिक: v = a ⇒ ω = √(A² – x²)/x = √5/2, अतः T = 2π·x/√(A² – x²)।

उत्तर: (C) 4π5

NEET UGPhysicsOscillations – SHM velocity and accelerationNEET UG 2017 · 7 May Shift 1
Q1716.
Thermodynamic processes are indicated in the following diagram.

Match the following
Column-1Column-2
P. Process Ia. Adiabatic
Q. Process IIb. Isobaric
R. Process IIIc. Isochoric
S. Process IVd. Isothermal
निम्नलिखित आरेख में ऊष्मागतिक प्रक्रम दर्शाए गए हैं।

निम्नलिखित का मिलान कीजिए
स्तम्भ-1स्तम्भ-2
P. प्रक्रम Ia. रुद्धोष्म (Adiabatic)
Q. प्रक्रम IIb. समदाबी (Isobaric)
R. प्रक्रम IIIc. समआयतनी (Isochoric)
S. प्रक्रम IVd. समतापी (Isothermal)
  1. AP → a, Q → c, R → d, S → b
  2. BP → c, Q → a, R → d, S → b
  3. CP → c, Q → d, R → b, S → a
  4. DP → d, Q → b, R → a, S → c
Show answer

Concept: On a P–V diagram: vertical line = constant V, horizontal line = constant P, along an isotherm = constant T, steeper than an isotherm while crossing to a lower isotherm = adiabatic.

  1. I: vertical (V constant) → isochoric (c).
  2. II: steeper than the isotherm, from 500 K to 300 K → adiabatic expansion (a).
  3. III: stays on the 500 K curve → isothermal (d).
  4. IV: horizontal (P constant) → isobaric (b).
  5. P → c, Q → a, R → d, S → b.

Short trick: Only one option starts with P → c and also has Q → a.

Answer: (B) P → c, Q → a, R → d, S → b

अवधारणा: P–V आरेख पर: ऊर्ध्वाधर रेखा = नियत V, क्षैतिज रेखा = नियत P, समतापी वक्र के अनुदिश = नियत T, समतापी से अधिक ढलवाँ तथा निम्न ताप वक्र तक जाने वाला = रुद्धोष्म।

  1. I: ऊर्ध्वाधर (V नियत) → समआयतनी (c)।
  2. II: समतापी से अधिक ढलवाँ, 500 K से 300 K तक → रुद्धोष्म प्रसार (a)।
  3. III: 500 K वक्र पर ही रहता है → समतापी (d)।
  4. IV: क्षैतिज (P नियत) → समदाबी (b)।
  5. P → c, Q → a, R → d, S → b।

शॉर्ट ट्रिक: केवल एक विकल्प P → c से शुरू होकर Q → a भी रखता है।

उत्तर: (B) P → c, Q → a, R → d, S → b

NEET UGPhysicsThermodynamics – identifying processes on a P–V diagramNEET UG 2017 · 7 May Shift 1
Q1717.
A capacitor is charged by a battery. The battery is removed and another identical uncharged capacitor is connected in parallel. The total electrostatic energy of resulting system
एक संधारित्र को बैटरी द्वारा आवेशित किया जाता है। बैटरी हटा दी जाती है तथा एक अन्य सर्वसम अनावेशित संधारित्र को समांतर क्रम में जोड़ा जाता है। परिणामी निकाय की कुल स्थिरवैद्युत ऊर्जा
  1. AIncreases by a factor of 44 गुना बढ़ जाती है
  2. BDecreases by a factor of 22 गुना घट जाती है
  3. CRemains the sameसमान रहती है
  4. DIncreases by a factor of 22 गुना बढ़ जाती है
Show answer

Concept: With the battery removed, charge is conserved: U=Q22C.

  1. Initially Ui=Q22C.
  2. In parallel with an identical capacitor: Ceq=2C, charge still Q.
  3. Uf=Q22(2C)=Ui2 – the other half is lost as heat/radiation in the connecting wires.

Short trick: Isolated charge Q shared between equal capacitors → energy halves (U ∝ 1/C at fixed Q).

Answer: (B) Decreases by a factor of 2

अवधारणा: बैटरी हटाने पर आवेश संरक्षित रहता है: U=Q22C।

  1. प्रारम्भ में Ui=Q22C।
  2. सर्वसम संधारित्र के समांतर में: Ceq=2C, आवेश अब भी Q।
  3. Uf=Q22(2C)=Ui2 – शेष आधी ऊर्जा संयोजी तारों में ऊष्मा/विकिरण के रूप में नष्ट होती है।

शॉर्ट ट्रिक: पृथक आवेश Q को समान संधारित्रों में बाँटने पर → ऊर्जा आधी (नियत Q पर U ∝ 1/C)।

उत्तर: (B) 2 गुना घट जाती है

NEET UGPhysicsCapacitors – energy on sharing chargeNEET UG 2017 · 7 May Shift 1
Q1718.
The photoelectric threshold wavelength of silver is 3250 × 10–10 m. The velocity of the electron ejected from a silver surface by ultraviolet light of wavelength 2536 × 10–10 m is
(Given h = 4.14 × 10–15 eVs and c = 3 × 108 ms–1)
चाँदी की प्रकाश-विद्युत देहली तरंगदैर्ध्य 3250 × 10–10 m है। तरंगदैर्ध्य 2536 × 10–10 m के पराबैंगनी प्रकाश द्वारा चाँदी के पृष्ठ से उत्सर्जित इलेक्ट्रॉन का वेग है
(दिया है h = 4.14 × 10–15 eVs तथा c = 3 × 108 ms–1)
  1. A≈ 6 × 105 ms–1
  2. B≈ 0.6 × 106 ms–1
  3. C≈ 61 × 103 ms–1
  4. D≈ 0.3 × 106 ms–1
Show answer

Concept: Einstein's equation: Kmax=hc(1λ−1λ0)=12mv2.

  1. hc=4.14×10−15×3×108=1242 eV nm
  2. Kmax=1242(1253.6−1325)=4.90−3.82=1.08 eV
  3. v=2×1.08×1.6×10−199.1×10−31≈6.1×105 m s−1
  4. Options (A) 6 × 105 and (B) 0.6 × 106 are the same number, so both are correct; (C) and (D) are wrong.

Short trick: Write every option in one form: 6×10⁵ = 0.6×10⁶ – two identical values means two correct choices.

Answer: Bonus – (A) and (B) are numerically identical (≈ 6 × 105 m s–1), so two options are correct.

अवधारणा: आइन्सटीन का समीकरण: Kmax=hc(1λ−1λ0)=12mv2।

  1. hc=4.14×10−15×3×108=1242 eV nm
  2. Kmax=1242(1253.6−1325)=4.90−3.82=1.08 eV
  3. v=2×1.08×1.6×10−199.1×10−31≈6.1×105 m s−1
  4. विकल्प (A) 6 × 105 तथा (B) 0.6 × 106 एक ही संख्या हैं, अतः दोनों सही हैं; (C) व (D) गलत हैं।

शॉर्ट ट्रिक: सभी विकल्पों को एक ही रूप में लिखिए: 6×10⁵ = 0.6×10⁶ – दो समान मान अर्थात् दो सही विकल्प।

उत्तर: बोनस – (A) तथा (B) संख्यात्मक रूप से समान हैं (≈ 6 × 105 m s–1), अतः दो विकल्प सही हैं।

NEET UGPhysicsDual nature – photoelectric effectNEET UG 2017 · 7 May Shift 1
Q1719.
A physical quantity of the dimensions of length that can be formed out of c, G and e24πε0 is [c is velocity of light, G is universal constant of gravitation and e is charge]
c, G तथा e24πε0 से बनाई जा सकने वाली लम्बाई की विमा वाली भौतिक राशि है [c प्रकाश का वेग, G सार्वत्रिक गुरुत्वाकर्षण नियतांक तथा e आवेश है]
  1. A1c2[Ge24πε0]12
  2. Bc2[Ge24πε0]12
  3. C1c2[e2G4πε0]12
  4. D1cGe24πε0
Show answer

Concept: e24πε0=Fr2 → [ML3T−2]; [G]=[M−1L3T−2]; [c]=[LT−1].

  1. Ge24πε0: [M−1L3T−2][ML3T−2]=[L6T−4] – mass cancels.
  2. [Ge24πε0]1/2=[L3T−2]
  3. Divide by c2=[L2T−2]: [L] ✓ → option (A).
  4. (B) gives [L5T−4]; (C) still contains mass; (D) gives [L5T−3].

Short trick: Mass can vanish only through the product G·e²/4πε₀ – rules out (C); then fix powers of c to kill T.

Answer: (A) 1c2[Ge24πε0]12

अवधारणा: e24πε0=Fr2 → [ML3T−2]; [G]=[M−1L3T−2]; [c]=[LT−1]।

  1. Ge24πε0: [M−1L3T−2][ML3T−2]=[L6T−4] – द्रव्यमान कट जाता है।
  2. [Ge24πε0]1/2=[L3T−2]
  3. c2=[L2T−2] से भाग देने पर: [L] ✓ → विकल्प (A)।
  4. (B) से [L5T−4]; (C) में द्रव्यमान बचा रहता है; (D) से [L5T−3]।

शॉर्ट ट्रिक: द्रव्यमान केवल गुणनफल G·e²/4πε₀ से ही हट सकता है – (C) बाहर; फिर T हटाने के लिए c की घात तय करें।

उत्तर: (A) 1c2[Ge24πε0]12

NEET UGPhysicsUnits and measurements – dimensional analysisNEET UG 2017 · 7 May Shift 1
Q1720.
Two cars moving in opposite directions approach each other with speed of 22 m/s and 16.5 m/s respectively. The driver of the first car blows a horn having a frequency 400 Hz. The frequency heard by the driver of the second car is [velocity of sound 340 m/s]
विपरीत दिशाओं में गतिमान दो कारें क्रमशः 22 m/s तथा 16.5 m/s की चाल से एक-दूसरे की ओर आ रही हैं। पहली कार का चालक 400 Hz आवृत्ति का हॉर्न बजाता है। दूसरी कार के चालक द्वारा सुनी गई आवृत्ति है [ध्वनि का वेग 340 m/s]
  1. A350 Hz
  2. B361 Hz
  3. C411 Hz
  4. D448 Hz
Show answer

Concept: Source and observer approaching: f′=fv+vov−vs.

  1. vs=22 m/s (first car, source), vo=16.5 m/s (second car, observer).
  2. f′=400×340+16.5340−22=400×356.5318
  3. f′≈448 Hz

Short trick: Approaching → frequency must rise above 400 Hz: only 411 or 448; relative speed 38.5 m/s ≈ 11% of 340 → ≈ 448.

Answer: (D) 448 Hz

अवधारणा: स्रोत तथा प्रेक्षक एक-दूसरे की ओर आते हुए: f′=fv+vov−vs।

  1. vs=22 m/s (पहली कार, स्रोत), vo=16.5 m/s (दूसरी कार, प्रेक्षक)।
  2. f′=400×340+16.5340−22=400×356.5318
  3. f′≈448 Hz

शॉर्ट ट्रिक: पास आते हुए → आवृत्ति 400 Hz से अधिक: केवल 411 या 448; आपेक्षिक चाल 38.5 m/s ≈ 340 का 11% → ≈ 448।

उत्तर: (D) 448 Hz

NEET UGPhysicsWaves – Doppler effectNEET UG 2017 · 7 May Shift 1