NEET UG · 2,240 questions

NEET UG 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 PYQs

Real previous year questions, subject-wise. Try the question, then open the answer and the explanation in Hindi & English – free, no login.

Courses – airGurukul

2,240 questions.

Q1721.
In a common emitter transistor amplifier the audio signal voltage across the collector is 3 V. The resistance of collector is 3 kΩ. If current gain is 100 and the base resistance is 2 kΩ, the voltage and power gain of the amplifier is
एक उभयनिष्ठ उत्सर्जक ट्रांजिस्टर प्रवर्धक में संग्राहक के सिरों पर श्रव्य सिग्नल वोल्टता 3 V है। संग्राहक का प्रतिरोध 3 kΩ है। यदि धारा लब्धि 100 तथा आधार प्रतिरोध 2 kΩ है, तो प्रवर्धक की वोल्टता लब्धि तथा शक्ति लब्धि है
  1. A200 and 1000200 तथा 1000
  2. B15 and 20015 तथा 200
  3. C150 and 15000150 तथा 15000
  4. D20 and 200020 तथा 2000
Show answer

Concept: CE amplifier: voltage gain AV=βRCRB; power gain =β×AV.

  1. AV=100×32=150
  2. Power gain =150×100=15000
  3. The 3 V signal value is not needed.

Short trick: Power gain = current gain × voltage gain → must equal 100 × A_V; only 150 & 15000 satisfy it.

Answer: (C) 150 and 15000

अवधारणा: CE प्रवर्धक: वोल्टता लब्धि AV=βRCRB; शक्ति लब्धि =β×AV।

  1. AV=100×32=150
  2. शक्ति लब्धि =150×100=15000
  3. 3 V सिग्नल मान की आवश्यकता नहीं है।

शॉर्ट ट्रिक: शक्ति लब्धि = धारा लब्धि × वोल्टता लब्धि → 100 × A_V होना चाहिए; केवल 150 व 15000 संतुष्ट करते हैं।

उत्तर: (C) 150 तथा 15000

NEET UGPhysicsSemiconductor electronics – CE amplifier gainsNEET UG 2017 · 7 May Shift 1
Q1722.
Which one of the following represents forward bias diode?
निम्नलिखित में से कौन-सा अग्र बायस (forward bias) में डायोड को निरूपित करता है?
  1. A
  2. B
  3. C
  4. D
Show answer

Concept: A diode is forward biased when its p-side (anode, triangle side) is at a higher potential than its n-side (cathode, bar side). In every figure the anode is on the left.

  1. (A) 0 V on the left, –2 V on the right: anode higher → forward bias ✓
  2. (B) –4 V vs –3 V: anode lower → reverse bias
  3. (C) –2 V vs +2 V: anode lower → reverse bias
  4. (D) 3 V vs 5 V: anode lower → reverse bias

Short trick: Arrow of the diode symbol points from high to low potential when it conducts – need V(left) > V(right).

Answer: (A) 0 V on the anode side, –2 V on the other side

अवधारणा: डायोड अग्र बायस में तब होता है जब उसका p-भाग (ऐनोड, त्रिभुज वाला सिरा) n-भाग (कैथोड, पट्टी वाला सिरा) से उच्च विभव पर हो। प्रत्येक चित्र में ऐनोड बाईं ओर है।

  1. (A) बाईं ओर 0 V, दाईं ओर –2 V: ऐनोड उच्च → अग्र बायस ✓
  2. (B) –4 V बनाम –3 V: ऐनोड निम्न → पश्च बायस
  3. (C) –2 V बनाम +2 V: ऐनोड निम्न → पश्च बायस
  4. (D) 3 V बनाम 5 V: ऐनोड निम्न → पश्च बायस

शॉर्ट ट्रिक: चालन के समय डायोड प्रतीक का तीर उच्च से निम्न विभव की ओर इंगित करता है – V(बायाँ) > V(दायाँ) चाहिए।

उत्तर: (A) ऐनोड की ओर 0 V, दूसरी ओर –2 V

NEET UGPhysicsSemiconductor electronics – forward bias of p–n junctionNEET UG 2017 · 7 May Shift 1
Q1723.
A spring of force constant k is cut into lengths of ratio 1 : 2 : 3. They are connected in series and the new force constant is k′. Then they are connected in parallel and force constant is k′′. Then k′ : k′′ is
बल नियतांक k की एक स्प्रिंग को 1 : 2 : 3 अनुपात की लम्बाइयों में काटा जाता है। इन्हें श्रेणी क्रम में जोड़ने पर नया बल नियतांक k′ है। फिर इन्हें समांतर क्रम में जोड़ने पर बल नियतांक k′′ है। तब k′ : k′′ है
  1. A1 : 6
  2. B1 : 9
  3. C1 : 11
  4. D1 : 14
Show answer

Concept: For a given spring, k∝1l (kl = constant).

  1. Pieces of length l/6, 2l/6, 3l/6 → k1=6k,k2=3k,k3=2k
  2. Series: 1k′=16k+13k+12k=1k⇒k′=k (the original spring rebuilt)
  3. Parallel: k″=6k+3k+2k=11k
  4. k′:k″=1:11

Short trick: Rejoining the pieces in series always gives back k; parallel = sum of 6, 3, 2.

Answer: (C) 1 : 11

अवधारणा: किसी दी गई स्प्रिंग के लिए k∝1l (kl = नियत)।

  1. l/6, 2l/6, 3l/6 लम्बाई के टुकड़े → k1=6k,k2=3k,k3=2k
  2. श्रेणी: 1k′=16k+13k+12k=1k⇒k′=k (मूल स्प्रिंग पुनः बन गई)
  3. समांतर: k″=6k+3k+2k=11k
  4. k′:k″=1:11

शॉर्ट ट्रिक: टुकड़ों को श्रेणी में जोड़ने पर सदैव k वापस मिलता है; समांतर = 6, 3, 2 का योग।

उत्तर: (C) 1 : 11

NEET UGPhysicsOscillations – spring combinationsNEET UG 2017 · 7 May Shift 1
Q1724.
The given electrical network is equivalent to
दिया गया विद्युत नेटवर्क तुल्य है
  1. AAND gateAND गेट
  2. BOR gateOR गेट
  3. CNOR gateNOR गेट
  4. DNOT gateNOT गेट
Show answer

Concept: A NOR gate with both inputs joined acts as a NOT gate; two NOTs in a row cancel.

  1. First NOR: output A+B―.
  2. Second NOR with shorted inputs = NOT: output A+B.
  3. Final NOT: Y=A+B― → NOR gate.

Short trick: NOR → NOT → NOT: the two NOTs cancel, leaving the first NOR.

Answer: (C) NOR gate

अवधारणा: दोनों निवेश जुड़े होने पर NOR गेट, NOT गेट की तरह कार्य करता है; लगातार दो NOT एक-दूसरे को निरस्त कर देते हैं।

  1. पहला NOR: निर्गत A+B―।
  2. जुड़े निवेशों वाला दूसरा NOR = NOT: निर्गत A+B।
  3. अंतिम NOT: Y=A+B― → NOR गेट।

शॉर्ट ट्रिक: NOR → NOT → NOT: दोनों NOT निरस्त, पहला NOR बचता है।

उत्तर: (C) NOR गेट

NEET UGPhysicsSemiconductor electronics – logic gatesNEET UG 2017 · 7 May Shift 1
Q1725.
The acceleration due to gravity at a height 1 km above the earth is the same as at a depth d below the surface of earth. Then
पृथ्वी से 1 km ऊँचाई पर गुरुत्वीय त्वरण, पृथ्वी के पृष्ठ से d गहराई पर गुरुत्वीय त्वरण के समान है। तब
  1. Ad=12 km
  2. Bd = 1 km
  3. Cd=32 km
  4. Dd = 2 km
Show answer

Concept: For h, d ≪ R: gh=g(1−2hR), gd=g(1−dR).

  1. Equate: 2hR=dR
  2. d=2h=2×1=2 km

Short trick: g falls twice as fast going up as going down (near the surface) → d = 2h.

Answer: (D) d = 2 km

अवधारणा: h, d ≪ R के लिए: gh=g(1−2hR), gd=g(1−dR)।

  1. बराबर रखने पर: 2hR=dR
  2. d=2h=2×1=2 km

शॉर्ट ट्रिक: पृष्ठ के निकट ऊपर जाने पर g, नीचे जाने की तुलना में दोगुनी तेजी से घटता है → d = 2h।

उत्तर: (D) d = 2 km

NEET UGPhysicsGravitation – variation of g with height and depthNEET UG 2017 · 7 May Shift 1
Q1726.
Which of the following statements are correct?
(a) Centre of mass of a body always coincides with the centre of gravity of the body.
(b) Centre of mass of a body is the point at which the total gravitational torque on the body is zero
(c) A couple on a body produce both translational and rotational motion in a body.
(d) Mechanical advantage greater than one means that small effort can be used to lift a large load.
निम्नलिखित में से कौन-से कथन सही हैं?
(a) किसी पिण्ड का द्रव्यमान केन्द्र सदैव उसके गुरुत्व केन्द्र के संपाती होता है।
(b) किसी पिण्ड का द्रव्यमान केन्द्र वह बिन्दु है जिसके परितः पिण्ड पर कुल गुरुत्वीय बल-आघूर्ण शून्य होता है
(c) किसी पिण्ड पर बल-युग्म, पिण्ड में स्थानान्तरीय तथा घूर्णी दोनों गतियाँ उत्पन्न करता है।
(d) एक से अधिक यांत्रिक लाभ का अर्थ है कि अल्प आयास (effort) द्वारा बड़े भार को उठाया जा सकता है।
  1. A(b) and (d)(b) तथा (d)
  2. B(a) and (b)(a) तथा (b)
  3. C(b) and (c)(b) तथा (c)
  4. D(c) and (d)(c) तथा (d)
Show answer

Concept: CM and CG coincide only when g is uniform over the body; a couple has zero net force; MA = load/effort.

  1. (a) False – for a large body in non-uniform g, CM and CG differ ("always" is wrong).
  2. (b) Taken as correct – for a body in uniform g, the gravitational torque about the CM (= CG) is zero.
  3. (c) False – a couple has zero resultant force, so it produces only rotation, no translation.
  4. (d) True – MA = load/effort > 1 means effort is less than load.
  5. Correct pair: (b) and (d).

Short trick: Any option containing (a) or (c) is out → only (b) and (d) remain.

Answer: (A) (b) and (d)

अवधारणा: द्रव्यमान केन्द्र तथा गुरुत्व केन्द्र तभी संपाती होते हैं जब पिण्ड पर g एकसमान हो; बल-युग्म का परिणामी बल शून्य होता है; यांत्रिक लाभ = भार/आयास।

  1. (a) असत्य – असमान g में बड़े पिण्ड के लिए CM तथा CG भिन्न होते हैं ("सदैव" गलत है)।
  2. (b) सही माना गया – एकसमान g में पिण्ड के CM (= CG) के परितः गुरुत्वीय बल-आघूर्ण शून्य होता है।
  3. (c) असत्य – बल-युग्म का परिणामी बल शून्य है, अतः यह केवल घूर्णन उत्पन्न करता है, स्थानान्तरण नहीं।
  4. (d) सत्य – यांत्रिक लाभ = भार/आयास > 1 का अर्थ है आयास भार से कम है।
  5. सही युग्म: (b) तथा (d)।

शॉर्ट ट्रिक: (a) या (c) वाला हर विकल्प बाहर → केवल (b) तथा (d) बचता है।

उत्तर: (A) (b) तथा (d)

NEET UGPhysicsSystem of particles – centre of mass, couple, mechanical advantageNEET UG 2017 · 7 May Shift 1
Q1727.
A Carnot engine having an efficiency of 110 as heat engine, is used as a refrigerator. If the work done on the system is 10 J, the amount of energy absorbed from the reservoir at lower temperature is
ऊष्मा इंजन के रूप में 110 दक्षता वाले एक कार्नो इंजन को प्रशीतित्र के रूप में उपयोग किया जाता है। यदि निकाय पर किया गया कार्य 10 J है, तो निम्न ताप वाले भण्डार से अवशोषित ऊर्जा की मात्रा है
  1. A1 J
  2. B90 J
  3. C99 J
  4. D100 J
Show answer

Concept: For a reversible engine run backwards: coefficient of performance β=Q2W=1−ηη.

  1. β=1−0.10.1=9
  2. Q2=βW=9×10=90 J

Short trick: η = 1/10 → engine: of every 10 J from the hot body, 1 J is work and 9 J go to the cold body; reversed with W = 10 J → Q₂ = 90 J.

Answer: (B) 90 J

अवधारणा: उत्क्रमणीय इंजन को उल्टा चलाने पर: कार्य-निष्पादन गुणांक β=Q2W=1−ηη।

  1. β=1−0.10.1=9
  2. Q2=βW=9×10=90 J

शॉर्ट ट्रिक: η = 1/10 → इंजन: गर्म भण्डार से प्रति 10 J में 1 J कार्य तथा 9 J ठण्डे भण्डार को; उल्टा चलाने पर W = 10 J → Q₂ = 90 J।

उत्तर: (B) 90 J

NEET UGPhysicsThermodynamics – Carnot engine as refrigeratorNEET UG 2017 · 7 May Shift 1
Q1728.
If θ1 and θ2 be the apparent angles of dip observed in two vertical planes at right angles to each other, then the true angle of dip θ is given by
यदि परस्पर लम्बवत् दो ऊर्ध्वाधर तलों में प्रेक्षित आभासी नति कोण θ1 तथा θ2 हों, तो वास्तविक नति कोण θ दिया जाता है
  1. Acot2θ = cot2θ1 + cot2θ2
  2. Btan2θ = tan2θ1 + tan2θ2
  3. Ccot2θ = cot2θ1 – cot2θ2
  4. Dtan2θ = tan2θ1 – tan2θ2
Show answer

Concept: In a vertical plane at angle α to the meridian, the vertical component V is unchanged but the horizontal component becomes H cos α: tan⁡θ′=tan⁡θcos⁡α.

  1. cot⁡θ1=cot⁡θcos⁡α, cot⁡θ2=cot⁡θsin⁡α (planes at 90°)
  2. Square and add: cot2⁡θ1+cot2⁡θ2=cot2⁡θ

Short trick: cot θ = H/V – horizontal components add as perpendicular vectors → cot² adds.

Answer: (A) cot2θ = cot2θ1 + cot2θ2

अवधारणा: याम्योत्तर से α कोण पर स्थित ऊर्ध्वाधर तल में ऊर्ध्व घटक V अपरिवर्तित रहता है परन्तु क्षैतिज घटक H cos α हो जाता है: tan⁡θ′=tan⁡θcos⁡α।

  1. cot⁡θ1=cot⁡θcos⁡α, cot⁡θ2=cot⁡θsin⁡α (तल परस्पर 90° पर)
  2. वर्ग करके जोड़ने पर: cot2⁡θ1+cot2⁡θ2=cot2⁡θ

शॉर्ट ट्रिक: cot θ = H/V – क्षैतिज घटक लम्बवत् सदिशों की तरह जुड़ते हैं → cot² जुड़ते हैं।

उत्तर: (A) cot2θ = cot2θ1 + cot2θ2

NEET UGPhysicsMagnetism and matter – apparent dipNEET UG 2017 · 7 May Shift 1
Q1729.
An arrangement of three parallel straight wires placed perpendicular to plane of paper carrying same current 'I' along the same direction is shown in Fig. Magnitude of force per unit length on the middle wire 'B' is given by
कागज़ के तल के लम्बवत् रखे, एक ही दिशा में समान धारा 'I' वाले तीन समांतर सीधे तारों की व्यवस्था चित्र में दर्शाई गई है। मध्य तार 'B' पर प्रति एकांक लम्बाई बल का परिमाण है
  1. Aμ0I22πd
  2. B2μ0I2πd
  3. C2μ0I2πd
  4. Dμ0I22πd
Show answer

Concept: Parallel currents attract with force per unit length f=μ0I1I22πd.

  1. B is pulled toward C and toward A, each with f=μ0I22πd.
  2. The two forces are at 90°: F=f2+f2=2f
  3. F=2μ0I22πd=μ0I22πd

Short trick: Two equal perpendicular forces → √2 times one; √2/2 = 1/√2.

Answer: (D) μ0I22πd

अवधारणा: समांतर धाराएँ प्रति एकांक लम्बाई f=μ0I1I22πd बल से आकर्षित करती हैं।

  1. B, C की ओर तथा A की ओर, प्रत्येक f=μ0I22πd बल से खिंचता है।
  2. दोनों बल परस्पर 90° पर हैं: F=f2+f2=2f
  3. F=2μ0I22πd=μ0I22πd

शॉर्ट ट्रिक: दो समान लम्बवत् बल → एक बल का √2 गुना; √2/2 = 1/√2।

उत्तर: (D) μ0I22πd

NEET UGPhysicsMoving charges – force between parallel currentsNEET UG 2017 · 7 May Shift 1
Q1730.
Two astronauts are floating in gravitational free space after having lost contact with their spaceship. The two will:
अपने अंतरिक्षयान से संपर्क टूट जाने के पश्चात् दो अंतरिक्ष यात्री गुरुत्व मुक्त आकाश में तैर रहे हैं। वे दोनों:
  1. AKeep floating at the same distance between themअपने बीच समान दूरी रखते हुए तैरते रहेंगे
  2. BMove towards each otherएक-दूसरे की ओर गति करेंगे
  3. CMove away from each otherएक-दूसरे से दूर गति करेंगे
  4. DWill become stationaryस्थिर हो जाएँगे
Show answer

Concept: "Gravitation-free space" means no external field, but the two astronauts still attract each other by Newton's law of gravitation.

  1. The only force on each is their mutual attraction F=Gm1m2r2.
  2. Hence they slowly accelerate towards each other.
  3. (A) and (D) ignore this force; (C) would need a repulsion, which gravity never gives.

Short trick: Gravity between masses never switches off – it is always attractive.

Answer: (B) Move towards each other

अवधारणा: "गुरुत्व मुक्त आकाश" का अर्थ है कोई बाह्य क्षेत्र नहीं, परन्तु दोनों अंतरिक्ष यात्री न्यूटन के गुरुत्वाकर्षण नियम से एक-दूसरे को फिर भी आकर्षित करते हैं।

  1. प्रत्येक पर एकमात्र बल उनका पारस्परिक आकर्षण F=Gm1m2r2 है।
  2. अतः वे धीरे-धीरे एक-दूसरे की ओर त्वरित होते हैं।
  3. (A) व (D) इस बल की उपेक्षा करते हैं; (C) के लिए प्रतिकर्षण चाहिए, जो गुरुत्व कभी नहीं देता।

शॉर्ट ट्रिक: द्रव्यमानों के बीच गुरुत्व कभी समाप्त नहीं होता – यह सदैव आकर्षी है।

उत्तर: (B) एक-दूसरे की ओर गति करेंगे

NEET UGPhysicsGravitation – mutual attractionNEET UG 2017 · 7 May Shift 1
Q1731.
In an electromagnetic wave in free space the root mean square value of the electric field is Erms = 6 V/m. The peak value of the magnetic field is
मुक्त आकाश में एक विद्युतचुंबकीय तरंग में विद्युत क्षेत्र का वर्ग माध्य मूल मान Erms = 6 V/m है। चुंबकीय क्षेत्र का शिखर मान है
  1. A1.41 × 10–8 T
  2. B2.83 × 10–8 T
  3. C0.70 × 10–8 T
  4. D4.23 × 10–8 T
Show answer

Concept: In an EM wave E=cB (for rms and for peak values alike); B0=2Brms.

  1. Brms=Ermsc=63×108=2×10−8 T
  2. B0=2×2×10−8=2.83×10−8 T

Short trick: E₀ = 6√2 V/m → B₀ = E₀/c = 2√2 × 10⁻⁸ T.

Answer: (B) 2.83 × 10–8 T

अवधारणा: विद्युतचुंबकीय तरंग में E=cB (rms तथा शिखर दोनों मानों के लिए); B0=2Brms।

  1. Brms=Ermsc=63×108=2×10−8 T
  2. B0=2×2×10−8=2.83×10−8 T

शॉर्ट ट्रिक: E₀ = 6√2 V/m → B₀ = E₀/c = 2√2 × 10⁻⁸ T।

उत्तर: (B) 2.83 × 10–8 T

NEET UGPhysicsElectromagnetic waves – field amplitudesNEET UG 2017 · 7 May Shift 1
Q1732.
The bulk modulus of a spherical object is 'B'. If it is subjected to uniform pressure 'p', the fractional decrease in radius is
एक गोलीय वस्तु का आयतन प्रत्यास्थता गुणांक 'B' है। यदि इस पर एकसमान दाब 'p' आरोपित किया जाए, तो त्रिज्या में भिन्नात्मक कमी है
  1. ApB
  2. BB3p
  3. C3pB
  4. Dp3B
Show answer

Concept: B=pΔV/V and for a sphere V∝r3⇒ΔVV=3Δrr.

  1. ΔVV=pB
  2. 3Δrr=pB⇒Δrr=p3B

Short trick: Fractional change in r is one-third of fractional change in volume.

Answer: (D) p3B

अवधारणा: B=pΔV/V तथा गोले के लिए V∝r3⇒ΔVV=3Δrr।

  1. ΔVV=pB
  2. 3Δrr=pB⇒Δrr=p3B

शॉर्ट ट्रिक: r में भिन्नात्मक परिवर्तन, आयतन के भिन्नात्मक परिवर्तन का एक-तिहाई होता है।

उत्तर: (D) p3B

NEET UGPhysicsMechanical properties of solids – bulk modulusNEET UG 2017 · 7 May Shift 1
Q1733.
The ratio of resolving powers of an optical microscope for two wavelengths λ1 = 4000 Å and λ2 = 6000 Å is
दो तरंगदैर्ध्यों λ1 = 4000 Å तथा λ2 = 6000 Å के लिए एक प्रकाशिक सूक्ष्मदर्शी की विभेदन क्षमताओं का अनुपात है
  1. A8 : 27
  2. B9 : 4
  3. C3 : 2
  4. D16 : 81
Show answer

Concept: Resolving power of a microscope =2μsin⁡θ1.22λ∝1λ.

  1. R1R2=λ2λ1=60004000=32

Short trick: Shorter λ resolves better, linearly: 4000 vs 6000 → 3 : 2 (no squares or cubes).

Answer: (C) 3 : 2

अवधारणा: सूक्ष्मदर्शी की विभेदन क्षमता =2μsin⁡θ1.22λ∝1λ।

  1. R1R2=λ2λ1=60004000=32

शॉर्ट ट्रिक: कम λ बेहतर विभेदन देता है, रैखिक रूप से: 4000 बनाम 6000 → 3 : 2 (कोई वर्ग या घन नहीं)।

उत्तर: (C) 3 : 2

NEET UGPhysicsRay optics – resolving power of microscopeNEET UG 2017 · 7 May Shift 1
Q1734.
Consider a drop of rain water having mass 1 g falling from a height of 1 km. It hits the ground with a speed of 50 m/s. Take g constant with a value 10 m/s2. The work done by the (i) gravitational force and the (ii) resistive force of air is
1 g द्रव्यमान की वर्षा जल की एक बूँद 1 km ऊँचाई से गिर रही है। यह 50 m/s की चाल से धरती से टकराती है। g को 10 m/s2 मान के साथ नियत लीजिए। (i) गुरुत्वीय बल तथा (ii) वायु के प्रतिरोधी बल द्वारा किया गया कार्य है
  1. A(i) – 10 J    (ii) –8.25 J
  2. B(i) 1.25 J    (ii) –8.25 J
  3. C(i) 100 J    (ii) 8.75 J
  4. D(i) 10 J    (ii) –8.75 J
Show answer

Concept: Work–energy theorem: Wg+Wair=ΔK.

  1. Wg=mgh=10−3×10×103=10 J
  2. ΔK=12×10−3×502=1.25 J
  3. Wair=1.25−10=−8.75 J

Short trick: Gravity does positive work on a falling body (rules out (A)); air resistance always does negative work (rules out (C)).

Answer: (D) (i) 10 J   (ii) –8.75 J

अवधारणा: कार्य-ऊर्जा प्रमेय: Wg+Wair=ΔK।

  1. Wg=mgh=10−3×10×103=10 J
  2. ΔK=12×10−3×502=1.25 J
  3. Wair=1.25−10=−8.75 J

शॉर्ट ट्रिक: गिरते पिण्ड पर गुरुत्व धनात्मक कार्य करता है ((A) बाहर); वायु प्रतिरोध सदैव ऋणात्मक कार्य करता है ((C) बाहर)।

उत्तर: (D) (i) 10 J   (ii) –8.75 J

NEET UGPhysicsWork, energy and power – work–energy theoremNEET UG 2017 · 7 May Shift 1
Q1735.
A spherical black body with a radius of 12 cm radiates 450 watt power at 500 K. If the radius were halved and the temperature doubled, the power radiated in watt would be
12 cm त्रिज्या की एक गोलीय कृष्णिका 500 K पर 450 वाट शक्ति विकिरित करती है। यदि त्रिज्या आधी तथा ताप दोगुना कर दिया जाए, तो विकिरित शक्ति (वाट में) होगी
  1. A225
  2. B450
  3. C1000
  4. D1800
Show answer

Concept: P=σAT4=σ(4πR2)T4⇒P∝R2T4.

  1. P2P1=(12)2(2)4=164=4
  2. P2=4×450=1800 W

Short trick: Halving R → ×1/4; doubling T → ×16; net ×4.

Answer: (D) 1800

अवधारणा: P=σAT4=σ(4πR2)T4⇒P∝R2T4।

  1. P2P1=(12)2(2)4=164=4
  2. P2=4×450=1800 W

शॉर्ट ट्रिक: R आधा → ×1/4; T दोगुना → ×16; कुल ×4।

उत्तर: (D) 1800

NEET UGPhysicsThermal properties – Stefan–Boltzmann lawNEET UG 2017 · 7 May Shift 1
Q1736.
Two blocks A and B of masses 3m and m respectively are connected by a massless and inextensible string. The whole system is suspended by a massless spring as shown in figure. The magnitudes of acceleration of A and B immediately after the string is cut, are respectively
द्रव्यमान क्रमशः 3m तथा m के दो गुटके A तथा B एक द्रव्यमानरहित तथा अवितान्य डोरी से जुड़े हैं। पूरा निकाय चित्रानुसार एक द्रव्यमानरहित स्प्रिंग से लटकाया गया है। डोरी काटने के ठीक बाद A तथा B के त्वरणों के परिमाण क्रमशः हैं
  1. Ag,g3
  2. Bg3,g
  3. Cg, g
  4. Dg3,g3
Show answer

Concept: A spring cannot change its extension instantly, so its force stays the same just after the cut; the string tension drops to zero at once.

  1. Before the cut (equilibrium of whole system): kx=(3m+m)g=4mg.
  2. After the cut, A: kx−3mg=3maA⇒aA=4mg−3mg3m=g3 (upward).
  3. B: only gravity acts → aB=g (downward, free fall).

Short trick: Spring force = "memory" of the old load (4mg); A feels the extra mg upward → g/3; B just falls freely.

Answer: (B) g3,g

अवधारणा: स्प्रिंग अपना विस्तार तुरन्त नहीं बदल सकती, अतः काटने के ठीक बाद उसका बल वही रहता है; डोरी का तनाव तुरन्त शून्य हो जाता है।

  1. काटने से पहले (पूरे निकाय का साम्य): kx=(3m+m)g=4mg।
  2. काटने के बाद, A: kx−3mg=3maA⇒aA=4mg−3mg3m=g3 (ऊपर की ओर)।
  3. B: केवल गुरुत्व कार्य करता है → aB=g (नीचे की ओर, मुक्त पतन)।

शॉर्ट ट्रिक: स्प्रिंग बल = पुराने भार (4mg) की "स्मृति"; A पर अतिरिक्त mg ऊपर → g/3; B मुक्त रूप से गिरता है।

उत्तर: (B) g3,g

NEET UGPhysicsLaws of motion – spring force just after cutting stringNEET UG 2017 · 7 May Shift 1
Q1737.
Two Polaroids P1 and P2 are placed with their axis perpendicular to each other. Unpolarised light I0 is incident on P1. A third polaroid P3 is kept in between P1 and P2 such that its axis makes an angle 45° with that of P1. The intensity of transmitted light through P2 is
दो पोलेरॉइड P1 तथा P2 इस प्रकार रखे हैं कि उनके अक्ष परस्पर लम्बवत् हैं। P1 पर अध्रुवित प्रकाश I0 आपतित है। एक तीसरा पोलेरॉइड P3, P1 तथा P2 के बीच इस प्रकार रखा है कि इसका अक्ष P1 के अक्ष से 45° का कोण बनाता है। P2 से पारगमित प्रकाश की तीव्रता है
  1. AI02
  2. BI04
  3. CI08
  4. DI016
Show answer

Concept: First polaroid halves unpolarised light; after that Malus' law I=I′cos2⁡θ applies at each polaroid.

  1. After P1: I02
  2. After P3 (45° to P1): I02cos2⁡45∘=I04
  3. After P2 (45° to P3): I04cos2⁡45∘=I08

Short trick: ½ × ½ × ½ = ⅛. (Without P₃ the crossed pair would give zero.)

Answer: (C) I08

अवधारणा: पहला पोलेरॉइड अध्रुवित प्रकाश को आधा कर देता है; उसके बाद प्रत्येक पोलेरॉइड पर मैलस का नियम I=I′cos2⁡θ लगता है।

  1. P1 के बाद: I02
  2. P3 के बाद (P1 से 45°): I02cos2⁡45∘=I04
  3. P2 के बाद (P3 से 45°): I04cos2⁡45∘=I08

शॉर्ट ट्रिक: ½ × ½ × ½ = ⅛। (P₃ के बिना क्रॉस युग्म शून्य देता।)

उत्तर: (C) I08

NEET UGPhysicsWave optics – polarisation, Malus' lawNEET UG 2017 · 7 May Shift 1
Q1738.
A long solenoid of diameter 0.1 m has 2 × 104 turns per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0 A from 4 A in 0.05 s. If the resistance of the coil is 10π2 Ω, the total charge flowing through the coil during this time is
0.1 m व्यास की एक लम्बी परिनालिका में प्रति मीटर 2 × 104 फेरे हैं। परिनालिका के केन्द्र पर 100 फेरों तथा 0.01 m त्रिज्या की एक कुण्डली इस प्रकार रखी है कि उसका अक्ष परिनालिका के अक्ष के संपाती है। परिनालिका में धारा 0.05 s में 4 A से नियत दर से घटकर 0 A हो जाती है। यदि कुण्डली का प्रतिरोध 10π2 Ω है, तो इस समय में कुण्डली से प्रवाहित कुल आवेश है
  1. A32π μC
  2. B16 μC
  3. C32 μC
  4. D16π μC
Show answer

Concept: Induced charge depends only on the total flux change: Q=NΔϕR (time 0.05 s is not needed).

  1. Field inside solenoid: B=μ0nI; flux through one turn of the small coil: ϕ=μ0nIπr2.
  2. Δϕ=4π×10−7×2×104×4×π(0.01)2=3.2π2×10−6 Wb
  3. Q=NΔϕR=100×3.2π2×10−610π2=32×10−6 C =32 μC

Short trick: The π² in R is there to cancel π (from μ₀) × π (from area) → answer has no π: only 16 μC or 32 μC can survive.

Answer: (C) 32 μC

अवधारणा: प्रेरित आवेश केवल कुल फ्लक्स परिवर्तन पर निर्भर करता है: Q=NΔϕR (समय 0.05 s की आवश्यकता नहीं)।

  1. परिनालिका के भीतर क्षेत्र: B=μ0nI; छोटी कुण्डली के एक फेरे से फ्लक्स: ϕ=μ0nIπr2।
  2. Δϕ=4π×10−7×2×104×4×π(0.01)2=3.2π2×10−6 Wb
  3. Q=NΔϕR=100×3.2π2×10−610π2=32×10−6 C =32 μC

शॉर्ट ट्रिक: R में π², π (μ₀ से) × π (क्षेत्रफल से) को काटने के लिए है → उत्तर में π नहीं: केवल 16 μC या 32 μC बच सकते हैं।

उत्तर: (C) 32 μC

NEET UGPhysicsElectromagnetic induction – charge flow due to flux changeNEET UG 2017 · 7 May Shift 1
Q1739.
Two discs of same moment of inertia rotating about their regular axis passing through centre and perpendicular to the plane of disc with angular velocities ω1 and ω2. They are brought into contact face to face coinciding the axis of rotation. The expression for loss of energy during this process is
समान जड़त्व आघूर्ण वाली दो डिस्क, केन्द्र से गुजरने वाले तथा डिस्क के तल के लम्बवत् अपने नियमित अक्ष के परितः कोणीय वेगों ω1 तथा ω2 से घूर्णन कर रही हैं। इन्हें घूर्णन अक्ष संपाती रखते हुए आमने-सामने संपर्क में लाया जाता है। इस प्रक्रम में ऊर्जा ह्रास का व्यंजक है
  1. A12I(ω1+ω2)2
  2. B14I(ω1−ω2)2
  3. CI(ω1−ω2)2
  4. DI8(ω1−ω2)2
Show answer

Concept: No external torque → angular momentum conserved; the discs end with a common ω (like a perfectly inelastic collision).

  1. Iω1+Iω2=2Iω⇒ω=ω1+ω22
  2. Ki=12I(ω12+ω22), Kf=12(2I)ω2=I4(ω1+ω2)2
  3. ΔK=Ki−Kf=I4(ω1−ω2)2

Short trick: Loss = ½ · (I₁I₂/(I₁+I₂)) · (ω₁ – ω₂)²; with I₁ = I₂ = I, reduced inertia = I/2 → ¼ I(ω₁ – ω₂)². Loss must vanish when ω₁ = ω₂, which rules out (A).

Answer: (B) 14I(ω1−ω2)2

अवधारणा: कोई बाह्य बल-आघूर्ण नहीं → कोणीय संवेग संरक्षित; डिस्कें अंत में एक उभयनिष्ठ ω से घूमती हैं (पूर्णतः अप्रत्यास्थ संघट्ट की तरह)।

  1. Iω1+Iω2=2Iω⇒ω=ω1+ω22
  2. Ki=12I(ω12+ω22), Kf=12(2I)ω2=I4(ω1+ω2)2
  3. ΔK=Ki−Kf=I4(ω1−ω2)2

शॉर्ट ट्रिक: ह्रास = ½ · (I₁I₂/(I₁+I₂)) · (ω₁ – ω₂)²; I₁ = I₂ = I पर समानीत जड़त्व = I/2 → ¼ I(ω₁ – ω₂)²। ω₁ = ω₂ होने पर ह्रास शून्य होना चाहिए, इससे (A) बाहर।

उत्तर: (B) 14I(ω1−ω2)2

NEET UGPhysicsRotational motion – energy loss when discs coupleNEET UG 2017 · 7 May Shift 1
Q1740.
Preeti reached the metro station and found that the escalator was not working. She walked up the stationary escalator in time t1. On other days, if she remains stationary on the moving escalator, then the escalator takes her up in time t2. The time taken by her to walk up on the moving escalator will be
प्रीति मेट्रो स्टेशन पहुँची तथा उसने पाया कि एस्केलेटर कार्य नहीं कर रहा था। वह स्थिर एस्केलेटर पर समय t1 में चलकर ऊपर पहुँची। अन्य दिनों में, यदि वह गतिमान एस्केलेटर पर स्थिर खड़ी रहती है, तो एस्केलेटर उसे समय t2 में ऊपर ले जाता है। गतिमान एस्केलेटर पर चलकर ऊपर जाने में उसके द्वारा लिया गया समय होगा
  1. At1+t22
  2. Bt1t2t2−t1
  3. Ct1t2t2+t1
  4. Dt1−t2
Show answer

Concept: Velocities add: v=vwalk+vesc, with vwalk=dt1, vesc=dt2.

  1. dt=dt1+dt2
  2. 1t=1t1+1t2⇒t=t1t2t1+t2

Short trick: Like resistors in parallel: t must be less than both t₁ and t₂ – only (C) always is.

Answer: (C) t1t2t2+t1

अवधारणा: वेग जुड़ते हैं: v=vwalk+vesc, जहाँ vwalk=dt1, vesc=dt2।

  1. dt=dt1+dt2
  2. 1t=1t1+1t2⇒t=t1t2t1+t2

शॉर्ट ट्रिक: समांतर प्रतिरोधों की तरह: t, t₁ तथा t₂ दोनों से कम होना चाहिए – केवल (C) सदैव ऐसा है।

उत्तर: (C) t1t2t2+t1

NEET UGPhysicsMotion in a straight line – relative velocity (escalator)NEET UG 2017 · 7 May Shift 1